Database Users

[Q] Verizon VS980 stuck booting up, can't get into recovery.

My problem started when I tried to flash the unofficial CM11 for my phone and I forgot to delete dalvik and whatnot, essentially flashing the ROM straight over 4.2.2 without any prep without realizing it. Now when the phone starts up it shows the LG logo, then the CM spinning boot image but never gets to the lockscreen no matter how long it sits.
I used CWM to flash the ROM and have tried to find out how to boot straight into recovery, but still haven't gotten it.
I also followed http://forum.xda-developers.com/showthread.php?t=2432476 with no luck. I was able to get all of the drivers installed, the LG Mobile Support Tool, and the Flashtool installed, got the .kdz into the program, and everything up to where it is communicating with the phone. At the point the phone gets to 49% and the computer to about 47%, then I get a "detachddl error" and the update stops. I tried reinstalling all of the software to do this again, and now the computer won't find the phone. Here is the exact error I'm getting
22:16:42 : Restart.....
22:16:42 : Start Date : 2013-12-02 22:16:42
22:16:42 : ---------- QM Testmode ---------
22:16:42 : ***** Check Tool Version *****
22:16:42 : Tool version : 1.6.8.2
22:16:42 : UpgradeDLL version : 2.1.4.1
22:16:42 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
22:16:42 : LGE USB Driver Version :
22:16:42 : Android PDLV Version :
22:16:42 : Android NDLV Version :
22:16:42 : ******************************************
22:16:42 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
22:16:42 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
22:16:42 : SetEmerModeAT()
22:16:42 : _IsConnectedPhone Call
22:16:53 : _IsConnectedPhone(2)
22:16:53 : 0 - NotConnected.
22:16:53 : 1 - Normal connect success
22:16:53 : 2 - Emergency connect success
22:16:53 : *****CheckOS Start********
22:16:53 : Microsoft_Windows7_Professional_
22:16:53 : *****CheckPCSyncPrograms Start*****
22:16:53 : PCSyncPrograms Not Found - OK and ready to upgrade
22:16:53 : Verifying phone connection...
22:16:53 : dwWaitResetTime(40000 ms)
22:16:54 : Phone Mode(2)
22:16:54 : *****GetPhoneType Start*****
22:16:54 : Phone Type : CDMA_2CHIP
22:16:54 : *****GetPhoneBinaryVersion Start*****
22:16:54 : Phone Bin Version : VS98011A_01
22:16:54 : *****Get ESN / IMEI / MEID Start*****
22:16:54 : ESN/IMEI/MEID : 990002590310767
22:16:55 : Check Backup and Restore model
22:16:55 : Skip Backup and Restore - Emergency mode
22:16:55 : Phone type Compare start
22:16:55 : *****CheckPCSyncPrograms Start*****
22:16:55 : PCSyncPrograms Not Found - OK and ready to upgrade
22:16:57 : ****************CheckAndDownload********************
22:16:57 : Version :
22:16:57 : ******Extract Start C:\Users\Nicholas\Downloads\LGG2VS980Stock.kdz*****
22:16:57 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
22:16:57 : Check 2G-4G big size kdz file..
22:16:57 : Extract 2G-4G big size kdz file..
22:16:57 : NNNNN WDB FullPath(C:\Users\Nicholas\Downloads\LGG2VS980Stock.kdz)
22:16:57 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
22:16:57 : Extract End C:\Users\Nicholas\Downloads\LGG2VS980Stock.kdz
22:16:57 : 01 Skip delete kdz 1.1 file...
22:16:57 : ------------------Model.dll Information-------------------
22:16:57 : Filename : LGUP_8974.dll
22:16:57 : Version : 0.2.6.0
22:16:57 : File size : 1334784
22:16:57 : File date : 2013/12/02-22:16:57
22:16:57 : PC Created date: 2013/12/02-22:16:57
22:16:57 : ----------------------------------------------------------
22:16:57 : *****Check LGCM Programs Start*****
22:16:57 : LGCM Programs Not Found - OK and ready to upgrade
22:16:57 : m_pLGCyonUpdate status change.
22:16:57 : *****WorkModelDLL Start*****
22:16:58 : strPhoneBinaryPath(C:\Users\Nicholas\Downloads\LGG2VS980Stock.kdz)
22:16:58 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
22:16:58 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
22:16:58 : _DetachDLL Call
22:17:03 : _DetachDLL Call End
22:17:03 : Call fn_StartUpgrade
22:17:03 : ********* 2Chip Model.dll input Parameter*************
22:17:03 : MODEL_EVENT : 32769
22:17:03 : PhoneBinaryPath : C:\Users\Nicholas\Downloads\LGG2VS980Stock.kdz
22:17:03 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
22:17:03 : BootWaitTime : 49500
22:17:03 : UsbHighSpeed : FALSE
22:17:03 : PhoneMode : 2
22:17:03 : NewPhoneBinVersion : LGG2VS980Stock
22:17:03 : ClearSI : FALSE
22:17:03 : AuthMark : 0
22:17:03 : ********* 2Chip Model.dll input Parameter End*************
22:17:07 : wParam : 20, lParam = 540
22:17:07 : MODEL DLL Event : (20, 540)
22:17:08 : SKT Model File Count = 540
22:17:08 : wParam : 6000, lParam = 0
22:17:08 : #################################################
22:17:08 : Indirect Internal / download mode
22:17:09 : wParam : 6001, lParam = 0
22:17:09 : #################################################
22:17:09 : Indirect Internal / PC to Phone send start
22:17:09 : wParam : 13, lParam = 10
22:17:09 : MODEL DLL Event : (13, 10)
22:17:09 : wParam : 20, lParam = 480
22:17:09 : MODEL DLL Event : (20, 480)
22:17:10 : SKT Model File Count = 480
22:17:12 : wParam : 13, lParam = 11
22:17:12 : MODEL DLL Event : (13, 11)
22:17:17 : wParam : 13, lParam = 12
22:17:22 : wParam : 13, lParam = 13
22:17:27 : wParam : 13, lParam = 14
22:17:32 : wParam : 13, lParam = 15
22:17:36 : wParam : 13, lParam = 16
22:17:41 : wParam : 13, lParam = 17
22:17:46 : wParam : 13, lParam = 18
22:17:51 : wParam : 13, lParam = 19
22:17:56 : wParam : 13, lParam = 20
22:17:56 : wParam : 20, lParam = 420
22:17:56 : MODEL DLL Event : (20, 420)
22:17:57 : SKT Model File Count = 420
22:18:01 : wParam : 13, lParam = 21
22:18:01 : MODEL DLL Event : (13, 21)
22:18:06 : wParam : 13, lParam = 22
22:18:11 : wParam : 13, lParam = 23
22:18:16 : wParam : 13, lParam = 24
22:18:21 : wParam : 13, lParam = 25
22:18:25 : wParam : 13, lParam = 26
22:18:30 : wParam : 13, lParam = 27
22:18:35 : wParam : 13, lParam = 28
22:18:40 : wParam : 13, lParam = 29
22:18:45 : wParam : 13, lParam = 30
22:18:45 : wParam : 20, lParam = 360
22:18:45 : MODEL DLL Event : (20, 360)
22:18:46 : SKT Model File Count = 360
22:18:50 : wParam : 13, lParam = 31
22:18:50 : MODEL DLL Event : (13, 31)
22:18:55 : wParam : 13, lParam = 32
22:19:00 : wParam : 13, lParam = 33
22:19:05 : wParam : 13, lParam = 34
22:19:10 : wParam : 13, lParam = 35
22:19:14 : wParam : 13, lParam = 36
22:19:19 : wParam : 13, lParam = 37
22:19:24 : wParam : 13, lParam = 38
22:19:29 : wParam : 13, lParam = 39
22:19:33 : wParam : 13, lParam = 40
22:19:33 : wParam : 20, lParam = 300
22:19:33 : MODEL DLL Event : (20, 300)
22:19:34 : SKT Model File Count = 300
22:19:38 : wParam : 13, lParam = 41
22:19:38 : MODEL DLL Event : (13, 41)
22:19:43 : wParam : 13, lParam = 42
22:19:48 : wParam : 13, lParam = 43
22:19:53 : wParam : 13, lParam = 44
22:19:57 : wParam : 13, lParam = 45
22:19:59 : wParam : 6002, lParam = 0
22:19:59 : #################################################
22:19:59 : Indirect Internal / PC to Phone send end
22:20:19 : wParam : 13, lParam = 46
22:20:39 : wParam : 13, lParam = 47
22:21:01 : wParam : 100, lParam = 3146241
22:21:01 : MODEL DLL Event : (100, 3146241)
22:21:01 : Step : TYPE_WPARAM_UPGRADE_ERROR
22:21:01 : CleanModelDll() : Free Model.dll
22:21:01 : _DetachDLL Call
22:21:06 : _DetachDLL Call End
22:21:06 : Page_Error ºÎºÐÀÔ´Ï´Ù
22:21:06 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
My next step was to follow this guide http://forum.xda-developers.com/showthread.php?t=2448960, but again, with no luck. Everything works great up to step 4, then when I power the phone off and back into download mode, the tool never sees the phone, or at least never starts the flash. I now got the tool to recognize the phone, but I get an error here, too. Starting with a "Wrong DLL" error upon opening the tool, and the this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when the tool sees the phone. Hash check says everything is fine.
I've tried to get it somewhere that I could get ADB to push it into recovery, but I can't get it into ADB. I'm completely stuck and not sure what my next action should be, or what I should retry. Any help whatsoever would be great.
Thanks in advance.

What happens when you try to boot to recovery?
Sent from my LG-D802 using XDA Premium 4 mobile app

x714x said:
What happens when you try to boot to recovery?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I can't get it to boot to recovery. I hold down Power + VolDown as it boots up and nothing happens, it just tries loading into CM. Am I doing it wrong?
Edit: I may have been doing it wrong before. I got in now and I'm attempting to restore from backup. I'll update once that goes through.

DeBuggz said:
I can't get it to boot to recovery. I hold down Power + VolDown as it boots up and nothing happens, it just tries loading into CM. Am I doing it wrong?
Edit: I may have been doing it wrong before. I got in now and I'm attempting to restore from backup. I'll update once that goes through.
Click to expand...
Click to collapse
this phone is tricky to boot into recovery... turn the power off, hold volume down and power together, as soon as you see the lg logo, let off of the two buttons and then repress and hold... when it brings you to the factory reset screen, hit power 3 times... this is for custom recoveries
even easier to download and app like "rom toolbox", it has an option to boot right into recovery, plus many other useful tools, like an terminal emulator and root browser

I'm having the same problem. After I set up the lg flash tool with the dll and tot files and hit ready you have to unplug and turn off your phone before going back into download mode one last time. Normally it just starts flashing back to stock but now it won't start flashing. Just says ready. Anyway I was running gummy 4.4 and have cwm 6.0.3.3 installed I think. I somehow erased all data and formated the SD card but I can get into recovery. I just have no idea how to fix
Sent from my Galaxy Nexus using xda app-developers app

do you have a nandroid backup? also i would recommend TWRP over CWM for this phone... as many users have reported issues with when flashing roms with CWM...
you need to get it into recovery so you can flash your backup (hopefully you have one) i had a similar issue with cm nightlies, it wouldnt get past the cm logo on boot... so i booted into recovery, flashed my backup, then started all over but this time i did a full wipe, and viola!

No backup I accidentally erased all data in cwm. Trying to use lg flash tool to go back to stock. Everything is working but the last part when I unplug my phone and plug it back in download mode nothing happens. It just says ready. Maybe a driver issue?
Sent from my Galaxy Nexus using xda app-developers app

Jeff Zaugg said:
No backup I accidentally erased all data in cwm. Trying to use lg flash tool to go back to stock. Everything is working but the last part when I unplug my phone and plug it back in download mode nothing happens. It just says ready. Maybe a driver issue?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
You are rebooting the phone into download mode and not just unplugging and plugging it back in right.
Sent from my LG-D800 using XDA Premium HD app

[Q] I highly doubt there is a fix for this...

*SOLVED* Read Below
So it's always been my caution to flash roms carefully. I simply wanted to update my rom because there was a new update released. I don't know if my eyes were playing tricks on me or if my eyes thought I clicked on the d801 version... I'm not sure but I just downloaded the full rom release of Flex 1.4 and it somehow was a d802 version? I'm screwed aren't I? Every time I just try to use flashtool with the right kdz file for my phone it stops at 49%.. When I look at my download mode screen it says:
U User S9.7 AS8.3 B71 UHS
S U LG-D802 04.2.2 HREV_10
D95810b-Flex v1.4
IDT Download
ROOTED
So what if I change the name of the kdz file to D802 instead of D801? Will it think it matches and somehow flash me back to my real D801 phone?? Is this even the cause? Well I thought I'd throw in a log report of my phone to show you guys where I stop at the process of flashing the rom. I've searched for ever and I think this link is best applied to me: http://forum.xda-developers.com/showthread.php?t=2432476
Here is the log:
18:53:20 : Restart.....
18:53:20 : Start Date : 2014-01-03 18:53:20
18:53:20 : ---------- QM Testmode ---------
18:53:20 : ***** Check Tool Version *****
18:53:20 : Tool version : 1.6.9.0
18:53:20 : UpgradeDLL version : 2.1.5.0
18:53:20 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
18:53:20 : LGE USB Driver Version :
18:53:20 : Android PDLV Version :
18:53:20 : Android NDLV Version :
18:53:20 : ******************************************
18:53:20 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
18:53:20 : SetEmerModeAT()
18:53:20 : _IsConnectedPhone Call
18:53:27 : _IsConnectedPhone(2)
18:53:27 : 0 - NotConnected.
18:53:27 : 1 - Normal connect success
18:53:27 : 2 - Emergency connect success
18:53:27 : *****CheckOS Start********
18:53:27 : Microsoft_Windows7_Home Edition_
18:53:27 : *****CheckPCSyncPrograms Start*****
18:53:28 : PCSyncPrograms Not Found - OK and ready to upgrade
18:53:28 : Verifying phone connection...
18:53:28 : dwWaitResetTime(40000 ms)
18:53:29 : Phone Mode(2)
18:53:29 : *****GetPhoneType Start*****
18:53:29 : Phone Type : CDMA_2CHIP
18:53:29 : *****GetPhoneBinaryVersion Start*****
18:53:29 : Phone Bin Version : D80110C_00
18:53:29 : *****Get ESN / IMEI / MEID Start*****
18:53:29 : ESN/IMEI/MEID : 000000000000000
18:53:30 : Check Backup and Restore model
18:53:30 : Skip Backup and Restore - Emergency mode
18:53:30 : Phone type Compare start
18:53:30 : *****CheckPCSyncPrograms Start*****
18:53:31 : PCSyncPrograms Not Found - OK and ready to upgrade
18:53:32 : ****************CheckAndDownload********************
18:53:32 : Version :
18:53:32 : ******Extract Start C:\Users\Michael\Downloads\usb_driver\T-Mobile USA D80110C_00.kdz*****
18:53:32 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
18:53:32 : Check 2G-4G big size kdz file..
18:53:32 : Extract 2G-4G big size kdz file..
18:53:32 : NNNNN WDB FullPath(C:\Users\Michael\Downloads\usb_driver\T-Mobile USA D80110C_00.kdz)
18:53:32 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
18:53:32 : Extract End C:\Users\Michael\Downloads\usb_driver\T-Mobile USA D80110C_00.kdz
18:53:32 : 01 Skip delete kdz 1.1 file...
18:53:32 : ------------------Model.dll Information-------------------
18:53:32 : Filename : LGUP_8974.dll
18:53:32 : Version : 0.2.10.0
18:53:32 : File size : 1461248
18:53:32 : File date : 2014/01/03-18:53:32
18:53:32 : PC Created date: 2014/01/03-18:53:32
18:53:32 : ----------------------------------------------------------
18:53:32 : *****Check LGCM Programs Start*****
18:53:32 : LGCM Programs Not Found - OK and ready to upgrade
18:53:32 : m_pLGCyonUpdate status change.
18:53:32 : *****WorkModelDLL Start*****
18:53:33 : strPhoneBinaryPath(C:\Users\Michael\Downloads\usb_driver\T-Mobile USA D80110C_00.kdz)
18:53:33 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
18:53:33 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
18:53:33 : _DetachDLL Call
18:53:38 : _DetachDLL Call End
18:53:38 : Call fn_StartUpgrade
18:53:38 : ********* 2Chip Model.dll input Parameter*************
18:53:38 : MODEL_EVENT : 32769
18:53:38 : PhoneBinaryPath : C:\Users\Michael\Downloads\usb_driver\T-Mobile USA D80110C_00.kdz
18:53:38 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
18:53:38 : BootWaitTime : 49500
18:53:38 : UsbHighSpeed : FALSE
18:53:38 : PhoneMode : 2
18:53:38 : NewPhoneBinVersion : T-Mobile USA D80110C_00
18:53:38 : ClearSI : FALSE
18:53:38 : AuthMark : 0
18:53:38 : ********* 2Chip Model.dll input Parameter End*************
18:53:41 : wParam : 20, lParam = 540
18:53:41 : MODEL DLL Event : (20, 540)
18:53:42 : Model File Count = 540
18:53:42 : wParam : 6000, lParam = 0
18:53:42 : #################################################
18:53:42 : Indirect Internal / download mode
18:53:42 : wParam : 6001, lParam = 0
18:53:42 : #################################################
18:53:42 : Indirect Internal / PC to Phone send start
18:53:42 : wParam : 13, lParam = 10
18:53:42 : MODEL DLL Event : (13, 10)
18:53:43 : wParam : 20, lParam = 480
18:53:43 : MODEL DLL Event : (20, 480)
18:53:43 : Model File Count = 480
18:53:47 : wParam : 13, lParam = 11
18:53:47 : MODEL DLL Event : (13, 11)
18:53:53 : wParam : 13, lParam = 12
18:53:59 : wParam : 13, lParam = 13
18:54:04 : wParam : 13, lParam = 1418:54:10 : wParam : 13, lParam = 15
18:54:16 : wParam : 13, lParam = 16
18:54:21 : wParam : 13, lParam = 17
18:54:27 : wParam : 13, lParam = 18
18:54:32 : wParam : 13, lParam = 19
18:54:38 : wParam : 13, lParam = 20
18:54:38 : wParam : 20, lParam = 420
18:54:38 : MODEL DLL Event : (20, 420)
18:54:39 : Model File Count = 420
18:54:43 : wParam : 13, lParam = 21
18:54:43 : MODEL DLL Event : (13, 21)
18:54:49 : wParam : 13, lParam = 22
18:54:56 : wParam : 13, lParam = 23
18:55:01 : wParam : 13, lParam = 24
18:55:07 : wParam : 13, lParam = 25
18:55:13 : wParam : 13, lParam = 26
18:55:19 : wParam : 13, lParam = 27
18:55:25 : wParam : 13, lParam = 28
18:55:32 : wParam : 13, lParam = 29
18:55:38 : wParam : 13, lParam = 30
18:55:38 : wParam : 20, lParam = 360
18:55:38 : MODEL DLL Event : (20, 360)
18:55:38 : Model File Count = 360
18:55:44 : wParam : 13, lParam = 31
18:55:44 : MODEL DLL Event : (13, 31)
18:55:50 : wParam : 13, lParam = 32
18:55:56 : wParam : 13, lParam = 33
18:56:02 : wParam : 13, lParam = 34
18:56:09 : wParam : 13, lParam = 35
18:56:15 : wParam : 13, lParam = 36
18:56:20 : wParam : 13, lParam = 37
18:56:26 : wParam : 13, lParam = 38
18:56:33 : wParam : 13, lParam = 39
18:56:39 : wParam : 13, lParam = 40
18:56:39 : wParam : 20, lParam = 300
18:56:39 : MODEL DLL Event : (20, 300)
18:56:43 : Model File Count = 300
18:56:44 : wParam : 13, lParam = 41
18:56:44 : MODEL DLL Event : (13, 41)
18:56:50 : wParam : 13, lParam = 42
18:56:56 : wParam : 13, lParam = 43
18:57:02 : wParam : 13, lParam = 44
18:57:08 : wParam : 13, lParam = 45
18:57:10 : wParam : 6002, lParam = 0
18:57:10 : #################################################
18:57:10 : Indirect Internal / PC to Phone send end
18:57:30 : wParam : 13, lParam = 46
18:57:50 : wParam : 13, lParam = 47
18:58:12 : wParam : 100, lParam = 3146241
18:58:12 : MODEL DLL Event : (100, 3146241)
18:58:12 : Step : TYPE_WPARAM_UPGRADE_ERROR
18:58:12 : CleanModelDll() : Free Model.dll
18:58:12 : _DetachDLL Call
18:58:17 : _DetachDLL Call End
18:58:17 : Page_Error ºÎºÐÀÔ´Ï´Ù
18:58:17 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
I ran into this link: http://forum.xda-developers.com/showthread.php?t=2595885
It made me try to reboot holding only power and vol- buttons. I then got into a screen mode that said "Hard Reset?" It reset the data and img off my phone and I'm back into twrp!!! Isn't this the weirdest thing ever!!??

I've taken some pictures so my post is more understanding lol.

I also found out why this happened as well... It was a patch file to make it d801... thanks a bunch guys!!

and when i can't acces to the recovery, how we can repair this? have the same log

If you still can get to download mode, then just flash to stock using a kdz file with the following settings:
in RD test tool, choos: CDMA instead of 3GQCT
CS emergency instead of diag
then click on CSE web upgrade test instead of normal web upgrade test
the flashing process will not stuck at 47 normally.

devdassi said:
If you still can get to download mode, then just flash to stock using a kdz file with the following settings:
in RD test tool, choos: CDMA instead of 3GQCT
CS emergency instead of diag
then click on CSE web upgrade test instead of normal web upgrade test
the flashing process will not stuck at 47 normally.
Click to expand...
Click to collapse
You devdassi are a god among men!! I have been stuck at the 49% with no recovery option for a long time!!! You are my saviour!!
:laugh:

LG flash tool error

Accidentely i wiped everything(data,internal memory,system),now i don't have anythig to flash either backup stock twrp.I am trying to flash stock kdz file ,evverything is going fine but at 49% my phone stuck Indirect internal /pc to phone send end and again starts flashing from scratch.I also tried adb sideload but it dident worked for me.plz help me to sort out this issue.i am really confused,i really don't understand whta i did wrong.Attached savelng while flashing via R&D tool.
16:26:06 : Restart.....
16:26:06 : Start Date : 2014-01-14 16:26:06
16:26:06 : ---------- QM Testmode ---------
16:26:06 : ***** Check Tool Version *****
16:26:06 : Tool version : 1.6.9.0
16:26:06 : UpgradeDLL version : 2.1.5.0
16:26:06 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
16:26:06 : LGE USB Driver Version :
16:26:06 : Android PDLV Version :
16:26:06 : Android NDLV Version : 3.8.0.0
16:26:06 : ******************************************
16:26:06 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
16:26:06 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
16:26:07 : SetEmerModeAT()
16:26:07 : _IsConnectedPhone Call
16:26:15 : _IsConnectedPhone(2)
16:26:15 : 0 - NotConnected.
16:26:15 : 1 - Normal connect success
16:26:15 : 2 - Emergency connect success
16:26:15 : *****CheckOS Start********
16:26:15 : Microsoft_Windows7_Professional_
16:26:15 : *****CheckPCSyncPrograms Start*****
16:26:15 : PCSyncPrograms Not Found - OK and ready to upgrade
16:26:15 : Verifying phone connection...
16:26:15 : dwWaitResetTime(40000 ms)
16:26:16 : Phone Mode(2)
16:26:16 : *****GetPhoneType Start*****
16:26:16 : Phone Type : CDMA_2CHIP
16:26:16 : *****GetPhoneBinaryVersion Start*****
16:26:16 : Phone Bin Version : D80210B_00
16:26:16 : *****Get ESN / IMEI / MEID Start*****
16:26:16 : ESN/IMEI/MEID : 000000000000000
16:26:17 : Check Backup and Restore model
16:26:17 : Skip Backup and Restore - Emergency mode
16:26:17 : Phone type Compare start
16:26:17 : *****CheckPCSyncPrograms Start*****
16:26:18 : PCSyncPrograms Not Found - OK and ready to upgrade
16:26:19 : ****************CheckAndDownload********************
16:26:19 : Version :
16:26:19 : ******Extract Start C:\Users\mangesh\Desktop\India D80210C_00.kdz*****
16:26:19 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
16:26:19 : Check 2G-4G big size kdz file..
16:26:19 : Extract 2G-4G big size kdz file..
16:26:19 : NNNNN WDB FullPath(C:\Users\mangesh\Desktop\India D80210C_00.kdz)
16:26:19 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
16:26:19 : Extract End C:\Users\mangesh\Desktop\India D80210C_00.kdz
16:26:19 : 01 Skip delete kdz 1.1 file...
16:26:19 : ------------------Model.dll Information-------------------
16:26:19 : Filename : LGUP_8974.dll
16:26:19 : Version : 0.2.10.0
16:26:19 : File size : 1461248
16:26:19 : File date : 2014/01/14-16:26:19
16:26:19 : PC Created date: 2014/01/14-16:26:19
16:26:19 : ----------------------------------------------------------
16:26:19 : *****Check LGCM Programs Start*****
16:26:19 : LGCM Programs Not Found - OK and ready to upgrade
16:26:19 : m_pLGCyonUpdate status change.
16:26:20 : *****WorkModelDLL Start*****
16:26:22 : strPhoneBinaryPath(C:\Users\mangesh\Desktop\India D80210C_00.kdz)
16:26:22 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
16:26:22 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
16:26:22 : _DetachDLL Call
16:26:27 : _DetachDLL Call End
16:26:27 : Call fn_StartUpgrade
16:26:27 : ********* 2Chip Model.dll input Parameter*************
16:26:27 : MODEL_EVENT : 32769
16:26:27 : PhoneBinaryPath : C:\Users\mangesh\Desktop\India D80210C_00.kdz
16:26:27 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
16:26:27 : BootWaitTime : 49500
16:26:27 : UsbHighSpeed : FALSE
16:26:27 : PhoneMode : 2
16:26:27 : NewPhoneBinVersion : India D80210C_00
16:26:27 : ClearSI : FALSE
16:26:27 : AuthMark : 0
16:26:27 : ********* 2Chip Model.dll input Parameter End*************
16:26:30 : wParam : 20, lParam = 540
16:26:30 : MODEL DLL Event : (20, 540)
16:26:31 : Model File Count = 540
16:26:31 : wParam : 6000, lParam = 0
16:26:31 : #################################################
16:26:31 : Indirect Internal / download mode
16:26:31 : wParam : 6001, lParam = 0
16:26:31 : #################################################
16:26:31 : Indirect Internal / PC to Phone send start
16:26:31 : wParam : 13, lParam = 10
16:26:32 : MODEL DLL Event : (13, 10)
16:26:32 : wParam : 20, lParam = 480
16:26:32 : MODEL DLL Event : (20, 480)
16:26:33 : Model File Count = 480
16:26:36 : wParam : 13, lParam = 11
16:26:36 : MODEL DLL Event : (13, 11)
16:26:43 : wParam : 13, lParam = 12
16:26:49 : wParam : 13, lParam = 13
16:26:55 : wParam : 13, lParam = 14
16:27:02 : wParam : 13, lParam = 15
16:27:08 : wParam : 13, lParam = 16
16:27:15 : wParam : 13, lParam = 17
16:27:21 : wParam : 13, lParam = 18
16:27:27 : wParam : 13, lParam = 19
16:27:34 : wParam : 13, lParam = 20
16:27:34 : wParam : 20, lParam = 420
16:27:34 : MODEL DLL Event : (20, 420)
16:27:35 : Model File Count = 420
16:27:40 : wParam : 13, lParam = 21
16:27:40 : MODEL DLL Event : (13, 21)
16:27:46 : wParam : 13, lParam = 22
16:27:53 : wParam : 13, lParam = 23
16:27:59 : wParam : 13, lParam = 24
16:28:06 : wParam : 13, lParam = 25
16:28:12 : wParam : 13, lParam = 26
16:28:19 : wParam : 13, lParam = 27
16:28:25 : wParam : 13, lParam = 28
16:28:31 : wParam : 13, lParam = 29
16:28:38 : wParam : 13, lParam = 30
16:28:38 : wParam : 20, lParam = 360
16:28:38 : MODEL DLL Event : (20, 360)
16:28:39 : Model File Count = 360
16:28:45 : wParam : 13, lParam = 31
16:28:45 : MODEL DLL Event : (13, 31)
16:28:51 : wParam : 13, lParam = 32
16:28:57 : wParam : 13, lParam = 33
16:29:04 : wParam : 13, lParam = 34
16:29:10 : wParam : 13, lParam = 35
16:29:17 : wParam : 13, lParam = 36
16:29:23 : wParam : 13, lParam = 37
16:29:29 : wParam : 13, lParam = 38
16:29:36 : wParam : 13, lParam = 39
16:29:42 : wParam : 13, lParam = 40
16:29:42 : wParam : 20, lParam = 300
16:29:42 : MODEL DLL Event : (20, 300)
16:29:43 : Model File Count = 300
16:29:49 : wParam : 13, lParam = 41
16:29:49 : MODEL DLL Event : (13, 41)
16:29:55 : wParam : 13, lParam = 42
16:30:01 : wParam : 13, lParam = 43
16:30:08 : wParam : 13, lParam = 44
16:30:14 : wParam : 13, lParam = 45
16:30:16 : wParam : 6002, lParam = 0
16:30:16 : #################################################
16:30:16 : Indirect Internal / PC to Phone send end
16:30:36 : wParam : 13, lParam = 46
16:30:56 : wParam : 13, lParam = 4716:36:06 : wParam : 6001, lParam = 0
16:36:06 : #################################################
16:36:06 : Indirect Internal / PC to Phone send start
16:39:55 : wParam : 6002, lParam = 0
16:39:55 : #################################################
16:39:55 : Indirect Internal / PC to Phone send end
16:40:56 : wParam : 100, lParam = 3146240
16:40:57 : MODEL DLL Event : (100, 3146240)
16:40:57 : Step : TYPE_WPARAM_UPGRADE_ERROR
16:40:57 : CleanModelDll() : Free Model.dll
16:40:57 : _DetachDLL Call
16:41:02 : _DetachDLL Call End
16:41:02 : Page_Error ºÎºÐÀÔ´Ï´Ù
16:41:02 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
16:31:17 : wParam : 6001, lParam = 0
16:31:17 : #################################################
16:31:17 : Indirect Internal / PC to Phone send start
16:35:05 : wParam : 6002, lParam = 0
16:35:05 : #################################################
16:35:05 : Indirect Internal / PC to Phone send end

Had this issue for several times. Download "LGMobile Support Tool". Connect in Download Mode (turn device off and hold "volume up" while connecting via USB and go to Options and Upgrade Recovery. I also stuck on 49% until I found out you can get back on Stock by this solution. It works fine.

[Q] Unable to unroot

hi guys, i unable to unroot.
im currently using pa rom. everytime i try to unroot. it will always have an error at 49%. and the bar does not coincide with the phone as well.

Plain Water said:
hi guys, i unable to unroot.
im currently using pa rom. everytime i try to unroot. it will always have an error at 49%. and the bar does not coincide with the phone as well.
Click to expand...
Click to collapse
this is the message : 15:19:57 : Restart.....
15:19:57 : Start Date : 2014-02-01 15:19:57
15:19:57 : ---------- QM Testmode ---------
15:19:57 : ***** Check Tool Version *****
15:19:57 : Tool version : 1.6.9.0
15:19:57 : UpgradeDLL version : 2.1.5.0
15:19:57 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
15:19:57 : LGE USB Driver Version :
15:19:57 : Android PDLV Version :
15:19:57 : Android NDLV Version :
15:19:57 : ******************************************
15:19:57 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
15:19:57 : SetEmerModeAT()
15:19:57 : _IsConnectedPhone Call
15:20:05 : _IsConnectedPhone(2)
15:20:05 : 0 - NotConnected.
15:20:05 : 1 - Normal connect success
15:20:05 : 2 - Emergency connect success
15:20:05 : *****CheckOS Start********
15:20:05 : Microsoft_Windows7_Home Edition_
15:20:05 : *****CheckPCSyncPrograms Start*****
15:20:05 : PCSyncPrograms Not Found - OK and ready to upgrade
15:20:05 : Verifying phone connection...
15:20:05 : dwWaitResetTime(40000 ms)
15:20:06 : Phone Mode(2)
15:20:06 : *****GetPhoneType Start*****
15:20:06 : Phone Type : CDMA_2CHIP
15:20:06 : *****GetPhoneBinaryVersion Start*****
15:20:06 : Phone Bin Version : D80210B_00
15:20:06 : *****Get ESN / IMEI / MEID Start*****
15:20:06 : ESN/IMEI/MEID : 000000000000000
15:20:07 : Check Backup and Restore model
15:20:07 : Skip Backup and Restore - Emergency mode
15:20:07 : Phone type Compare start
15:20:07 : *****CheckPCSyncPrograms Start*****
15:20:07 : PCSyncPrograms Not Found - OK and ready to upgrade
15:20:08 : ****************CheckAndDownload********************
15:20:08 : Version :
15:20:08 : ******Extract Start C:\Users\Keith\Desktop\D80210B_00.kdz*****
15:20:08 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
15:20:08 : Check 2G-4G big size kdz file..
15:20:08 : Extract 2G-4G big size kdz file..
15:20:09 : NNNNN WDB FullPath(C:\Users\Keith\Desktop\D80210B_00.kdz)
15:20:09 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
15:20:09 : Extract End C:\Users\Keith\Desktop\D80210B_00.kdz
15:20:09 : 01 Skip delete kdz 1.1 file...
15:20:09 : ------------------Model.dll Information-------------------
15:20:09 : Filename : LGUP_8974.dll
15:20:09 : Version : 0.2.10.0
15:20:09 : File size : 1461248
15:20:09 : File date : 2014/02/01-15:20:09
15:20:09 : PC Created date: 2014/02/01-15:20:08
15:20:09 : ----------------------------------------------------------
15:20:09 : *****Check LGCM Programs Start*****
15:20:09 : LGCM Programs Not Found - OK and ready to upgrade
15:20:09 : m_pLGCyonUpdate status change.
15:20:09 : *****WorkModelDLL Start*****
15:20:09 : strPhoneBinaryPath(C:\Users\Keith\Desktop\D80210B_00.kdz)
15:20:09 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
15:20:09 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
15:20:09 : _DetachDLL Call
15:20:14 : _DetachDLL Call End
15:20:14 : Call fn_StartUpgrade
15:20:14 : ********* 2Chip Model.dll input Parameter*************
15:20:14 : MODEL_EVENT : 32769
15:20:14 : PhoneBinaryPath : C:\Users\Keith\Desktop\D80210B_00.kdz
15:20:15 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
15:20:15 : BootWaitTime : 49500
15:20:15 : UsbHighSpeed : FALSE
15:20:15 : PhoneMode : 2
15:20:15 : NewPhoneBinVersion : D80210B_00
15:20:15 : ClearSI : FALSE
15:20:15 : AuthMark : 0
15:20:15 : ********* 2Chip Model.dll input Parameter End*************
15:20:18 : wParam : 20, lParam = 540
15:20:18 : MODEL DLL Event : (20, 540)
15:20:18 : Model File Count = 540
15:20:18 : wParam : 6000, lParam = 0
15:20:18 : #################################################
15:20:18 : Indirect Internal / download mode
15:20:19 : wParam : 6001, lParam = 0
15:20:19 : #################################################
15:20:19 : Indirect Internal / PC to Phone send start
15:20:19 : wParam : 13, lParam = 10
15:20:19 : MODEL DLL Event : (13, 10)
15:20:19 : wParam : 20, lParam = 480
15:20:19 : MODEL DLL Event : (20, 480)
15:20:19 : Model File Count = 480
15:20:22 : wParam : 13, lParam = 11
15:20:22 : MODEL DLL Event : (13, 11)
15:20:28 : wParam : 13, lParam = 12
15:20:32 : wParam : 13, lParam = 13
15:20:37 : wParam : 13, lParam = 14
15:20:42 : wParam : 13, lParam = 15
15:20:47 : wParam : 13, lParam = 16
15:20:51 : wParam : 13, lParam = 17
15:20:56 : wParam : 13, lParam = 18
15:21:01 : wParam : 13, lParam = 19
15:21:06 : wParam : 13, lParam = 20
15:21:06 : wParam : 20, lParam = 420
15:21:06 : MODEL DLL Event : (20, 420)
15:21:06 : Model File Count = 420
15:21:10 : wParam : 13, lParam = 21
15:21:10 : MODEL DLL Event : (13, 21)
15:21:15 : wParam : 13, lParam = 22
15:21:20 : wParam : 13, lParam = 23
15:21:24 : wParam : 13, lParam = 24
15:21:29 : wParam : 13, lParam = 25
15:21:34 : wParam : 13, lParam = 26
15:21:38 : wParam : 13, lParam = 27
15:21:43 : wParam : 13, lParam = 28
15:21:48 : wParam : 13, lParam = 29
15:21:53 : wParam : 13, lParam = 30
15:21:53 : wParam : 20, lParam = 360
15:21:53 : MODEL DLL Event : (20, 360)
15:21:53 : Model File Count = 360
15:21:57 : wParam : 13, lParam = 31
15:21:57 : MODEL DLL Event : (13, 31)
15:22:02 : wParam : 13, lParam = 32
15:22:07 : wParam : 13, lParam = 33
15:22:12 : wParam : 13, lParam = 34
15:22:16 : wParam : 13, lParam = 35
15:22:21 : wParam : 13, lParam = 36
15:22:26 : wParam : 13, lParam = 37
15:22:31 : wParam : 13, lParam = 38
15:22:36 : wParam : 13, lParam = 39
15:22:41 : wParam : 13, lParam = 40
15:22:41 : wParam : 20, lParam = 300
15:22:41 : MODEL DLL Event : (20, 300)
15:22:42 : Model File Count = 300
15:22:46 : wParam : 13, lParam = 41
15:22:46 : MODEL DLL Event : (13, 41)
15:22:51 : wParam : 13, lParam = 42
15:22:56 : wParam : 13, lParam = 43
15:23:01 : wParam : 13, lParam = 44
15:23:06 : wParam : 13, lParam = 45
15:23:07 : wParam : 6002, lParam = 0
15:23:07 : #################################################
15:23:07 : Indirect Internal / PC to Phone send end
15:23:27 : wParam : 13, lParam = 46
15:23:47 : wParam : 13, lParam = 47
15:24:09 : wParam : 100, lParam = 3146241
15:24:09 : MODEL DLL Event : (100, 3146241)
15:24:09 : Step : TYPE_WPARAM_UPGRADE_ERROR
15:24:09 : CleanModelDll() : Free Model.dll
15:24:09 : _DetachDLL Call
15:24:14 : _DetachDLL Call End
15:24:14 : Page_Error ºÎºÐÀÔ´Ï´Ù
15:24:14 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù

Plain Water said:
hi guys, i unable to unroot.
im currently using pa rom. everytime i try to unroot. it will always have an error at 49%. and the bar does not coincide with the phone as well.
Click to expand...
Click to collapse
There are many posts on this already. There seems to be a need to use TWRP and advanced wipe to clear data, system and both caches first.

[Q] lg g2 do not want to go back to stock ROM

Relief! Lg G2 (d805) :crying:
Sorry for my english I'm Brazilian
have a lg g2 in which installed the rom mahdi and try to re-stock rom not got success.
already tried and nothing off mode. this and now my phone a brick
*so is the logo of lg
# Ja used the original R & D test tool and the off mode. someone help me? ?
I paid 1900 and only has a month and have not pay: (
if posted in the wrong place forgive me because my English sucks
the error log in the R & D test tool
================================================== ==========
19:42:47 : Restart.....
19:42:47 : Start Date : 2014-03-26 19:42:47
19:42:47 : ---------- QM Testmode ---------
19:42:47 : ***** Check Tool Version *****
19:42:47 : Tool version : 1.6.9.0
19:42:47 : UpgradeDLL version : 2.1.5.0
19:42:47 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
19:42:47 : LGE USB Driver Version :
19:42:47 : Android PDLV Version :
19:42:47 : Android NDLV Version : 3.8.0.0
19:42:47 : ******************************************
19:42:47 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
19:42:47 : SetEmerModeAT()
19:42:47 : _IsConnectedPhone Call
19:42:54 : _IsConnectedPhone(2)
19:42:54 : 0 - NotConnected.
19:42:54 : 1 - Normal connect success
19:42:54 : 2 - Emergency connect success
19:42:54 : *****CheckOS Start********
19:42:54 : Microsoft_Windows7_Home Edition_Service Pack 1
19:42:54 : *****CheckPCSyncPrograms Start*****
19:42:55 : PCSyncPrograms Not Found - OK and ready to upgrade
19:42:55 : Verifying phone connection...
19:42:55 : dwWaitResetTime(40000 ms)
19:42:56 : Phone Mode(2)
19:42:56 : *****GetPhoneType Start*****
19:42:56 : Phone Type : CDMA_2CHIP
19:42:56 : *****GetPhoneBinaryVersion Start*****
19:42:56 : Phone Bin Version : D80510A_00
19:42:56 : *****Get ESN / IMEI / MEID Start*****
19:42:56 : ESN/IMEI/MEID : 000000000000000
19:43:00 : Check Backup and Restore model
19:43:00 : Skip Backup and Restore - Emergency mode
19:43:00 : Phone type Compare start
19:43:00 : *****CheckPCSyncPrograms Start*****
19:43:01 : PCSyncPrograms Not Found - OK and ready to upgrade
19:43:02 : ****************CheckAndDownload********************
19:43:02 : Version :
19:43:02 : ******Extract Start C:\Users\Noe\Desktop\xxx\D80210A_00.kdz*****
19:43:02 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
19:43:02 : Check 2G-4G big size kdz file..
19:43:02 : Extract 2G-4G big size kdz file..
19:43:02 : NNNNN WDB FullPath(C:\Users\Noe\Desktop\xxx\D80210A_00.kdz)
19:43:02 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
19:43:02 : Extract End C:\Users\Noe\Desktop\xxx\D80210A_00.kdz
19:43:02 : 01 Skip delete kdz 1.1 file...
19:43:02 : ------------------Model.dll Information-------------------
19:43:02 : Filename : LGUP_8974.dll
19:43:02 : Version : 0.2.10.0
19:43:02 : File size : 1461248
19:43:02 : File date : 2014/03/26-19:43:02
19:43:02 : PC Created date: 2014/03/26-19:43:02
19:43:02 : ----------------------------------------------------------
19:43:02 : *****Check LGCM Programs Start*****
19:43:02 : LGCM Programs Not Found - OK and ready to upgrade
19:43:02 : m_pLGCyonUpdate status change.
19:43:02 : *****WorkModelDLL Start*****
19:43:06 : strPhoneBinaryPath(C:\Users\Noe\Desktop\xxx\D80210A_00.kdz)
19:43:06 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
19:43:06 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
19:43:06 : _DetachDLL Call
19:43:11 : _DetachDLL Call End
19:43:11 : Call fn_StartUpgrade
19:43:11 : ********* 2Chip Model.dll input Parameter*************
19:43:11 : MODEL_EVENT : 32769
19:43:11 : PhoneBinaryPath : C:\Users\Noe\Desktop\xxx\D80210A_00.kdz
19:43:11 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
19:43:11 : BootWaitTime : 49500
19:43:11 : UsbHighSpeed : FALSE
19:43:11 : PhoneMode : 2
19:43:11 : NewPhoneBinVersion : D80210A_00
19:43:11 : ClearSI : FALSE
19:43:11 : AuthMark : 0
19:43:11 : ********* 2Chip Model.dll input Parameter End*************
19:43:14 : wParam : 20, lParam = 540
19:43:14 : MODEL DLL Event : (20, 540)
19:43:14 : Model File Count = 540
19:43:15 : wParam : 6000, lParam = 0
19:43:15 : #################################################
19:43:15 : Indirect Internal / download mode
19:43:15 : wParam : 6001, lParam = 0
19:43:15 : #################################################
19:43:15 : Indirect Internal / PC to Phone send start
19:43:16 : wParam : 13, lParam = 10
19:43:16 : MODEL DLL Event : (13, 10)
19:43:16 : wParam : 20, lParam = 480
19:43:16 : MODEL DLL Event : (20, 480)
19:43:16 : Model File Count = 480
19:43:22 : wParam : 13, lParam = 11
19:43:22 : MODEL DLL Event : (13, 11)
19:43:30 : wParam : 13, lParam = 12
19:43:38 : wParam : 13, lParam = 13
19:43:46 : wParam : 13, lParam = 14
19:43:54 : wParam : 13, lParam = 15
19:44:02 : wParam : 13, lParam = 16
19:44:10 : wParam : 13, lParam = 17
19:44:18 : wParam : 13, lParam = 18
19:44:27 : wParam : 13, lParam = 19
19:44:36 : wParam : 13, lParam = 20
19:44:36 : wParam : 20, lParam = 420
19:44:36 : MODEL DLL Event : (20, 420)
19:44:36 : Model File Count = 420
19:44:46 : wParam : 13, lParam = 21
19:44:46 : MODEL DLL Event : (13, 21)
19:44:54 : wParam : 13, lParam = 22
19:45:02 : wParam : 13, lParam = 23
19:45:10 : wParam : 13, lParam = 24
19:45:18 : wParam : 13, lParam = 25
19:45:28 : wParam : 13, lParam = 26
19:45:36 : wParam : 13, lParam = 27
19:45:45 : wParam : 13, lParam = 28
19:45:53 : wParam : 13, lParam = 29
19:46:01 : wParam : 13, lParam = 30
19:46:01 : wParam : 20, lParam = 360
19:46:01 : MODEL DLL Event : (20, 360)
19:46:01 : Model File Count = 360
19:46:09 : wParam : 13, lParam = 31
19:46:09 : MODEL DLL Event : (13, 31)
19:46:17 : wParam : 13, lParam = 32
19:46:25 : wParam : 13, lParam = 33
19:46:33 : wParam : 13, lParam = 34
19:46:41 : wParam : 13, lParam = 35
19:46:49 : wParam : 13, lParam = 36
19:46:56 : wParam : 13, lParam = 37
19:47:04 : wParam : 13, lParam = 38
19:47:12 : wParam : 13, lParam = 39
19:47:20 : wParam : 13, lParam = 40
19:47:20 : wParam : 20, lParam = 300
19:47:20 : MODEL DLL Event : (20, 300)
19:47:20 : Model File Count = 300
19:47:28 : wParam : 13, lParam = 41
19:47:28 : MODEL DLL Event : (13, 41)
19:47:36 : wParam : 13, lParam = 42
19:47:44 : wParam : 13, lParam = 43
19:47:52 : wParam : 13, lParam = 44
19:48:00 : wParam : 13, lParam = 45
19:48:02 : wParam : 6002, lParam = 0
19:48:02 : #################################################
19:48:02 : Indirect Internal / PC to Phone send end
19:48:23 : wParam : 13, lParam = 46
19:48:43 : wParam : 13, lParam = 47
19:49:05 : wParam : 100, lParam = 3146241
19:49:05 : MODEL DLL Event : (100, 3146241)
19:49:05 : Step : TYPE_WPARAM_UPGRADE_ERROR
19:49:05 : CleanModelDll() : Free Model.dll
19:49:05 : _DetachDLL Call
19:49:10 : _DetachDLL Call End
19:49:10 : Page_Error ºÎºÐÀÔ´Ï´Ù
19:49:10 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù