Hi ive got a couple of questions. Currently im on Orange France ML3 4.3 FTM csc full stock and i want to flash 4.4.2 NB7 DBT but i would like the csc to change to DBT so i can continue receive OTA updates and be recognised by Kies, so here are my questions:
1) Will Odin give me SUCCESS or FAIL ?
2) Do i have to flash it with .pit file?
3) Will the CSC change to DBT after i wipe/factory reset?
Thanks in advance
andresalonika said:
Hi ive got a couple of questions. Currently im on Orange France ML3 4.3 FTM csc full stock and i want to flash 4.4.2 NB7 DBT but i would like the csc to change to DBT so i can continue receive OTA updates and be recognised by Kies, so here are my questions:
1) Will Odin give me SUCCESS or FAIL ?
2) Do i have to flash it with .pit file?
3) Will the CSC change to DBT after i wipe/factory reset?
Thanks in advance
Click to expand...
Click to collapse
I THINK u need .pit file to flash with it. I flash from 4.3 to 4.4.2 Poland NB3 same changlist with DBT NB7 and dont need the .pit file and some theard said need the .pit file:. CSC will change when u finish flash new firmware.
Thanks for your reply! But i need to be sure whether i need to flash it with pit file or not.
Sent from my iPhone using Tapatalk
Anyone else?
Στάλθηκε από το SM-N9005 μου χρησιμοποιώντας Tapatalk
Related
Hi, I want to flash my galaxy as fedup with waiting for updates.
I got BTU, UK unbranded, unlocked S4
I am polish, so thinking flash it to polish firmware as they get it fast.
GT-I9505 XEO I9505XXUBMEA thats the one I want go for
Can someone tell what is it ? is it network firmware or unbranded?
I would go for it only if I can change CSC code to XEO, so I can get OTA updates.
If not I will keep waiting for BTU
And Dont really want XEO polish carier firmware, as I can flash to Three UK BTU network, would be the same and dont have to change CSC.
So, main questions are
What it is XEO ? what network ?
Can I flash it + change code to CSC all safe?
and how to do it ? Odin
Thank You.
Kris
matale0 said:
Hi, I want to flash my galaxy as fedup with waiting for updates.
I got BTU, UK unbranded, unlocked S4
I am polish, so thinking flash it to polish firmware as they get it fast.
GT-I9505 XEO I9505XXUBMEA thats the one I want go for
Can someone tell what is it ? is it network firmware or unbranded?
I would go for it only if I can change CSC code to XEO, so I can get OTA updates.
If not I will keep waiting for BTU
And Dont really want XEO polish carier firmware, as I can flash to Three UK BTU network, would be the same and dont have to change CSC.
So, main questions are
What it is XEO ? what network ?
Can I flash it + change code to CSC all safe?
and how to do it ? Odin
Thank You.
Kris
Click to expand...
Click to collapse
as far as i tried you cant change csc with flashing . unless you flash single csc not multi.
only way is to root with auto root than change csc wit csc changer and then flash desired firmware with odin.
xeo looks like it is simfree so its just general for poland
madman_cro said:
as far as i tried you cant change csc with flashing . unless you flash single csc not multi.
only way is to root with auto root than change csc wit csc changer and then flash desired firmware with odin.
xeo looks like it is simfree so its just general for poland
Click to expand...
Click to collapse
can i get singles files for odin? CSC XEO ?
thx
matale0 said:
can i get singles files for odin? CSC XEO ?
thx
Click to expand...
Click to collapse
i didnt find any searching on net so i guess no. they usualy pack 20+- csc together
there was some talk of chcnging csc with flashing twice with odin without auto reboot. but that didnt work for me.
madman_cro said:
i didnt find any searching on net so i guess no. they usualy pack 20+- csc together
there was some talk of chcnging csc with flashing twice with odin without auto reboot. but that didnt work for me.
Click to expand...
Click to collapse
i try that http://www.hotfile.com/dl/229983758/7d4d060/I9505XXUBMEA_I9505OXXBMF1_XEO.zip.html
matale0 said:
i try that http://www.hotfile.com/dl/229983758/7d4d060/I9505XXUBMEA_I9505OXXBMF1_XEO.zip.html
Click to expand...
Click to collapse
try it. remember if you want to change csc with single flash(wich i dont think so ,that worked on s2) after first boot reboot to recovery and wipe data/chache. in recovery you will see wich csc applied.
https://play.google.com/store/apps/details?id=com.manniakk.cscselector
Can someone help me out as I am new to all of this...
I am using a Samsung galaxy tab 7.0 (p2610), and I flashed a jelly bean update successfully using odin. I am not rooted.
I have a system update in the notifications window that is stuck there, that is not working (process fails), this is due to the csc code being in great britain.
I am in Canada, I have Odin ready to go, can someone please show me how to change the CSC of my device to Canada?
Where do I go to download the appropriate file? After I assume I load it up in Odin with device in recovery mode, and flash using the "CSC" option in Odin correct?
Any help would be great.
Hello i bought a couple of day ago a Samsung Galaxy S4 GT-I9505 from France.
I'm from Greece so i thought it would be good to install the greek firmware...
Now i try to restore to the french firmware but with no luck. Neither Kies nor odin works...
With kies i tried Factory restore and initialiazation but it didn't work.
And odin keeps giving me an "AUTH error".
But everytime odin soft bricks my phone(trying to install the french version), it installs the greek like a charm.
Could anyone please help me?
PS: 1) French firmware (I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar)
2) Greek Firmware (I9505XXUDMH6_I9505OXXDMH4_I9505XXUDMH6_HOME.tar)
3) my phone is factory unlocked
sotos_2002 said:
Hello i bought a couple of day ago a Samsung Galaxy S4 GT-I9505 from France.
I'm from Greece so i thought it would be good to install the greek firmware...
Now i try to restore to the french firmware but with no luck. Neither Kies nor odin works...
With kies i tried Factory restore and initialiazation but it didn't work.
And odin keeps giving me an "AUTH error".
But everytime odin soft bricks my phone(trying to install the french version), it installs the greek like a charm.
Could anyone please help me?
PS: 1) French firmware (I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar)
2) Greek Firmware (I9505XXUDMH6_I9505OXXDMH4_I9505XXUDMH6_HOME.tar)
3) my phone is factory unlocked
Click to expand...
Click to collapse
The Greek firmware is newer than the french and you cant flash back to older firmware on the S4 only to newer.
Btw why do you want to go back to the french? Im asking because i have the German one and was thinking of flashing the Greek. Is the Greek not working well?
you cannot downgrade as mga firmware is knox free and mh6 firmware contains knox you need to flash a newer french firmware .
Sent From my Gt-i9505
difyel said:
you cannot downgrade as mga firmware is knox free and mh6 firmware contains knox you need to flash a newer french firmware .
Sent From my Gt-i9505
Click to expand...
Click to collapse
So i have to wait until 4.3 to flash to french firmware?
Isn't there any way to downgrade?
i actually read someplace that any firmware starting with mgg or newer could be flashed over a knox firmware . so you could flash a french firmware ending with mgg or mh1 or mh5 . an mh8 will work for sure.
Sent From my Gt-i9505
Hey
Has anyone flashed a BTU firmware onto a different region phone??
I currently have a TGY model sm-n9005 want one to flash the BTU firmware below
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
over my
SM-N9005 Galaxy Note 3
PDA: N9005ZHUBMI7
CSC: N9005ZZHBMI7
MODEM: N9005XXUBMI5
I keep getting invalid ext4 img
Please if anyone knows how to get around this will really really appreciate it. (i am willing to donate to the person who solves this )
jeezy85 said:
Hey
Has anyone flashed a BTU firmware onto a different region phone??
I currently have a TGY model sm-n9005 want one to flash the BTU firmware below
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
over my
SM-N9005 Galaxy Note 3
PDA: N9005ZHUBMI7
CSC: N9005ZZHBMI7
MODEM: N9005XXUBMI5
I keep getting invalid ext4 img
Please if anyone knows how to get around this will really really appreciate it. (i am willing to donate to the person who solves this )
Click to expand...
Click to collapse
Im the other way around I want to Flash TGY into my BTU device as I need the chinese input
weasley said:
Im the other way around I want to Flash TGY into my BTU device as I need the chinese input
Click to expand...
Click to collapse
To flash cross regional fimrware you need to change you CSC code.
http://forum.xda-developers.com/showthread.php?t=2491877
Also if you flash MJ3 build then your bootloader will be upgraded and you have to stay will MJ3 firmware, you cant then downgrade back to MJ1 firmware
toker_X1 said:
To flash cross regional fimrware you need to change you CSC code.
http://forum.xda-developers.com/showthread.php?t=2491877
Also if you flash MJ3 build then your bootloader will be upgraded and you have to stay will MJ3 firmware, you cant then downgrade back to MJ1 firmware
Click to expand...
Click to collapse
BUMP
any luck anyone? still getin ext4 error
I want to know this as well. I have Malaysian fw on my phone but I want to switch to BTU. According to what I have read this should work because my current region is XX, however I have seen way too many people getting this ext4 error for me to try it.
Can someone give a definitive answer? I am on MJ3 with a region of XX. Thanks!
Sent from my SM-N9005 using XDA Premium 4 mobile app
patrick92260 said:
I want to know this as well. I have Malaysian fw on my phone but I want to switch to BTU. According to what I have read this should work because my current region is XX, however I have seen way too many people getting this ext4 error for me to try it.
Can someone give a definitive answer? I am on MJ3 with a region of XX. Thanks!
Click to expand...
Click to collapse
I'd like to know as well - my original firmware particulars read N900W8VLUBMJ1_N900W8OYABMJ1_N900W8VLUBMJ1_HOME.tar
perosredo said:
I'd like to know as well - my original firmware particulars read N900W8VLUBMJ1_N900W8OYABMJ1_N900W8VLUBMJ1_HOME.tar
Click to expand...
Click to collapse
Flashed MJ6 onto my malaysian Note 3 successfully, though once there haven't been able to change my CSC since... Also MJ6 has the new bootloaders and I now have warranty void 0x1...
My CSC code was XME, now BTU....
ultramag69 said:
Flashed MJ6 onto my malaysian Note 3 successfully, though once there haven't been able to change my CSC since... Also MJ6 has the new bootloaders and I now have warranty void 0x1...
My CSC code was XME, now BTU....
Click to expand...
Click to collapse
How did you flash it to void warranty?
sorry to hijack
but what does BTU stand for?
and what's the two letters before MJ7?
like UBMJ7, what's UB?
wilflare said:
sorry to hijack
but what does BTU stand for?
and what's the two letters before MJ7?
like UBMJ7, what's UB?[/QUOTE
CSC code for UK (no carrier) = BTU.
Revision of Android - MJ7, latest version released as of yet...
Not sure about the rest but it appears regional...
Flashed it after running through RDLV but had issues with WIFI and sd card... Flashed extracted modem from MJ6 rom, this sent me into a bootloop. Flashed stock MJ6 rom onto phone and fixed the bootloop but put new bootloaders on. At this point warranty void was 0x0. Tried Kingoapp to root hoping it wouldn't trip counter, it did...
New bootloaders are a mongrel....
Click to expand...
Click to collapse
Stay away from Kingo/vroot, xda has removed all links and closed the thread. It's full of malware / spyware and will send all personal details to a Chinese Web server.
Sent from my SM-N9005 using Tapatalk
ultramag69 said:
wilflare said:
sorry to hijack
but what does BTU stand for?
and what's the two letters before MJ7?
like UBMJ7, what's UB?[/QUOTE
CSC code for UK (no carrier) = BTU.
Revision of Android - MJ7, latest version released as of yet...
Not sure about the rest but it appears regional...
Flashed it after running through RDLV but had issues with WIFI and sd card... Flashed extracted modem from MJ6 rom, this sent me into a bootloop. Flashed stock MJ6 rom onto phone and fixed the bootloop but put new bootloaders on. At this point warranty void was 0x0. Tried Kingoapp to root hoping it wouldn't trip counter, it did...
New bootloaders are a mongrel....
Click to expand...
Click to collapse
this was my original PTN Firmware
ap= n9005xxubmj3
cp=n9005xxubmj2
csc=n9005phnbmj3
if just flashed it, with odin to the udmj7 firmware
ap= n9005xxudmj7
cp=n9005xxubmj2
csc=n9005oxadmj4
so far so good !! , still no random reboots ( i had before with the ubmj3 firmware )
Click to expand...
Click to collapse
just changed my firmware from xme to btu
just follow these from the s4 forum by kaushalls but use odin 3.04 and be patient it may fail for two time but will eventually will do it and run odin in normal mode not administrator mode
Make sure you take a backup via Kies if you need personal files
Download the respective stock ROMS from sammobile.com or samsung-updates.com or see thread on Stock Roms on XDA
Extract zip to get tar.md5
Put device into download mode (Vol down+ Home + Power) and Flash using Odin (PDA option)
Wait till device reboots back into Android after completing the flash and recovery
Once device reboots, do a Factory Reset via back up and reset option
Once device reboots after Factory Reset/recovery, enter the google account info and restore settings and then turn off the device
and restart (go into recovery and see the csc btu being applied if yes then stop here,do factory reset and restart)
after this the next steps are optional
Boot device back into download mode (Vol down+ Home + Power)
Re-flash the same downloaded firmware for a second time via Odin
Once the device reboots after the 2nd flash, your CSC should have changed to the CSC of the ROM you downloaded, and Kies also should show that CSC has changed and it should allow future updates via Kies or OTA
check csc by going to stock recoverry it will show manual mode at the bottom and then show btu csc applied
i am now on xxumdj6
I have galaxy s4 i9505 and after region changing my csc is ALB, i can't get updates. What can i do? It is multi-csc... Region SEB, but CSC ALB.
So I will not get updates?
Hi
I had the same problem, I don't know why it happens.
I also have GT-I9505 and at first I had mismatch of PDA and CSC, my PDA was ME2 and CSC was BTU so Kies told me it doesn't support my firmware and thus I couldn't get updates. That was on android 4.2.2.
Then I installed the DBT (android 4.3) stock rom of Germany but when I entered Kies the CSC was still BTU and didn't change even after a factory reset so again I couldn't get updates, not via Kies nor OTA. Afterwards, I installed at last the BTU stock rom and everything was OK.
The Kies no longer told me that my firmware is unsupported and I received the MK8 update a week ago and gonna receive the new update which was released yesterday in a few days. Moreover, I forgot to mention that the Knox flag wasn't tripped after installing the BTU rom.
My suggestion is you install the rom which matches the CSC of your device because the CSC doesn't change after installing a stock rom so you have to adapt yourself to the CSC.
Meyhemg said:
Hi
I had the same problem, I don't know why it happens.
I also have GT-I9505 and at first I had mismatch of PDA and CSC, my PDA was ME2 and CSC was BTU so Kies told me it doesn't support my firmware and thus I couldn't get updates. That was on android 4.2.2.
Then I installed the DBT (android 4.3) stock rom of Germany but when I entered Kies the CSC was still BTU and didn't change even after a factory reset so again I couldn't get updates, not via Kies nor OTA. Afterwards, I installed at last the BTU stock rom and everything was OK.
The Kies no longer told me that my firmware is unsupported and I received the MK8 update a week ago and gonna receive the new update which was released yesterday in a few days. Moreover, I forgot to mention that the Knox flag wasn't tripped after installing the BTU rom.
My suggestion is you install the rom which matches the CSC of your device because the CSC doesn't change after installing a stock rom so you have to adapt yourself to the CSC.
Click to expand...
Click to collapse
My CSC now is ALB, and i can't find this rom on samsung-updates.com
Before that the CSC was different?
Meyhemg said:
Before that the CSC was different?
Click to expand...
Click to collapse
Before was DTM
Vartotojas258 said:
Before was DTM
Click to expand...
Click to collapse
DTM is of Germany T-Mobile. Where are you from?
You had the German T-Mobile before and moved to SEB (Serbia) rom?
Meyhemg said:
DTM is of Germany T-Mobile. Where are you from?
You had the German T-Mobile before and moved to SEB (Serbia) rom?
Click to expand...
Click to collapse
I'm from lithuania, but when buy the phone csc was dtm.
Vartotojas258 said:
I'm from lithuania, but when buy the phone csc was dtm.
Click to expand...
Click to collapse
You can try flashing (via Odin) the new update which was released two days ago (MKE).
It was released for Germany and France for now but soon will be rolling to everyone.
I'm almost sure it won't trip the Knox flag if you do everything right.
Download here: http://www.sammobile.com/firmwares/3/?download=22443
Meyhemg said:
You can try flashing (via Odin) the new update which was released two days ago (MKE).
It was released for Germany and France for now but soon will be rolling to everyone.
I'm almost sure it won't trip the Knox flag if you do everything right.
Download here: http://www.sammobile.com/firmwares/3/?download=22443
Click to expand...
Click to collapse
If i wait for SEB region update and when i flash it csc will change? I think to wait for kitkat and then flash it.
Vartotojas258 said:
If i wait for SEB region update and when i flash it csc will change? I think to wait for kitkat and then flash it.
Click to expand...
Click to collapse
Yeah that's an option also.
Also, did you try factory reset after the installation? If not, do it. It sometimes helps, in my case it didn't help to change the CSC to DBT when I installed the German rom.
I hope Kitkat will arrive soon to our devices. I can't wait to see the improvements and how did they change the TW.
Few months ago I flashed Android 5.0 Poland and today I wanted to flash original version which is Android 5.0 Romania. I did flash it and CSC changed from XEO which is for Poland as far as I know to SEE (unkown) instead of csc ROM which is for Romania.
My question is how I can get rid of SEE csc and get the ROM csc which is normal for my current firmware. I did tried factory reset quite few times.
Google ?
defragut said:
Few months ago I flashed Android 5.0 Poland and today I wanted to flash original version which is Android 5.0 Romania. I did flash it and CSC changed from XEO which is for Poland as far as I know to SEE (unkown) instead of csc ROM which is for Romania.
My question is how I can get rid of SEE csc and get the ROM csc which is normal for my current firmware. I did tried factory reset quite few times.
Click to expand...
Click to collapse
you must root and change csc using this app
https://play.google.com/store/apps/details?id=com.manniakk.cscselector&hl=en
at.great said:
you must root and change csc using this app
https://play.google.com/store/apps/details?id=com.manniakk.cscselector&hl=en
Click to expand...
Click to collapse
The thing is that I don't want to have knox 0x1 after Rooting the phone. The reason I did installed Romanian Version it's because I want to go with at Warranty to fix something.
defragut said:
The thing is that I don't want to have knox 0x1 after Rooting the phone. The reason I did installed Romanian Version it's because I want to go with at Warranty to fix something.
Click to expand...
Click to collapse
this maybe help you flash CSC in odn csc tab:
extract cache.img and hidden.img from your Romania firmware make tar from them using this program(https://www.dropbox.com/s/egp2c88amceg8mn/IZArc.4.1.9.rar?dl=0)
change the tar name to CSC.tar and flash in odin CSC tab.
do it with your on risk