Database Users

[Q] [HELP] Hard Brick Nexus 7

Hi, this is my firt post, i'm going to quote this problem that's the same problem that I have...
"Device : Nexus 7
Problem : I was trying to unroot it and flash a 4.4.2 ROM to the device and i ended up bricking it somehow. I looked around a lot on here and youtube. I found one solution i had not tried which was to get into recovery mod. But the device was stuck on the boot loaded. So i hard shut it down, and pressed the key combination to load the boot loader. And, the screen wasn't loading. I heard the little chimes my computer makes when ever a USB device is active, so i heard the thing load into the boot loader. But its not showing on the screen!
Please help i really shouldn't have done this. But i am literally about to cry.
I tried using Wugfresh's Nexus toolkit to flash the ROM, and it would stop on sending system.
I dont know if i did something wrong, if the kernel was messed up, if the kit wasnt right, please as the video said there is 4 million members here. someone has to know what to do...
-Sean"
I did exactly the same thing that this guy did... ----> http://forum.xda-developers.com/showthread.php?t=2345874
The difference is that I don't live in USA and my Nexus doesn't have warranty... What can I do T.T my pc shows the tablet as Unknown Device and makes a sound when I puggle it, there has to be something that I can do >.<

EverAngelOn said:
Hi, this is my firt post, i'm going to quote this problem that's the same problem that I have...
"Device : Nexus 7
Problem : I was trying to unroot it and flash a 4.4.2 ROM to the device and i ended up bricking it somehow. I looked around a lot on here and youtube. I found one solution i had not tried which was to get into recovery mod. But the device was stuck on the boot loaded. So i hard shut it down, and pressed the key combination to load the boot loader. And, the screen wasn't loading. I heard the little chimes my computer makes when ever a USB device is active, so i heard the thing load into the boot loader. But its not showing on the screen!
Please help i really shouldn't have done this. But i am literally about to cry.
I tried using Wugfresh's Nexus toolkit to flash the ROM, and it would stop on sending system.
I dont know if i did something wrong, if the kernel was messed up, if the kit wasnt right, please as the video said there is 4 million members here. someone has to know what to do...
-Sean"
I did exactly the same thing that this guy did... ----> http://forum.xda-developers.com/showthread.php?t=2345874
The difference is that I don't live in USA and my Nexus doesn't have warranty... What can I do T.T my pc shows the tablet as Unknown Device and makes a sound when I puggle it, there has to be something that I can do >.<
Click to expand...
Click to collapse
Can you get into the bootloader still?

I can't
b3ltazar said:
Can you get into the bootloader still?
Click to expand...
Click to collapse
No, I can't. The screen is completely black.

Have you tried any of the suggestions in the thread you linked in the OP?

EverAngelOn said:
No, I can't. The screen is completely black.
Click to expand...
Click to collapse
Do you get a charging icon when you plug in the n7? did you try a diffrent cable?What exactly does ur computer do when you plug in the dead n7 (does it thy try to install a apx driver) Does toolkit see tablet like its in the bootloader? If so try to flash a new bootloader!
try this found in another thread
To get it out of AXP mode, the correct instructions:
1. Plug in the usb into computer
2. Hold Volume Down + Volume Up + Power simultaneously for like 15 seconds
3. The bootloader should show up.
4. If it doesn't, unplug the usb cable, and plug it back in and then repeat the these procedures

Wugs tool kit
First when you plug it in hold all three power buttons
Second
I also have used the tool kit it gets stuck all the time on the flashing system. I think its a time out error because of the complexity of extracting the image and flahing the image with out a retry or check command. Here is a fix that i have figured out. When in Wugs tool kit download the Os Version you want on your device locate the folder with the downloaded image and extract it using 7 zip. once extracted flash the remaing .img files seperatly under andvance setting menu select flash system then user data it should boot right up. if you forgot what version you flashed previously flash all img files boot bootloader system user etc. if you still have problems let me know. i can give you my email.
Click thanks if i helped

b3ltazar said:
Do you get a charging icon when you plug in the n7? did you try a diffrent cable?What exactly does ur computer do when you plug in the dead n7 (does it thy try to install a apx driver) Does toolkit see tablet like its in the bootloader? If so try to flash a new bootloader!
try this found in another thread
To get it out of AXP mode, the correct instructions:
1. Plug in the usb into computer
2. Hold Volume Down + Volume Up + Power simultaneously for like 15 seconds
3. The bootloader should show up.
4. If it doesn't, unplug the usb cable, and plug it back in and then repeat the these procedures
Click to expand...
Click to collapse
My tablet doesn't show the charging icon, I've tried with different cables, when I plug it to the laptop it makes a sound and shows an APX driver... I'm stressed and that instructions didn't work for me.

EverAngelOn said:
My tablet doesn't show the charging icon, I've tried with different cables, when I plug it to the laptop it makes a sound and shows an APX driver... I'm stressed and that instructions didn't work for me.
Click to expand...
Click to collapse
Unfortunately it sounds like you erased your bootloader and nvflash can do nothing for you unless you used the unbrickable mod before u f'ed up your tablet. Try sending it to asus for Warranty tell em you installed the ota update and it wouldn't boot up afterwards. I have read many threads about this issue with nobody being able to recover there tablet. Asus does have global warranty

Removing USB connection while flashing

Hi all,
I have a serious problem with my G2 which I could not solve: I used the new LG Flash Tool 2014 with stock KDZ file, everything was going just fine till I received an error message that LG server is not available, I disconnected the USB cable by mistake from my G2 and afterward I saw that it was in the middle of flashing process (12% was completed). I turned it off and tried to reach download mode again and nothing!, I'm receiving the "LG" logo and nothing- the screen goes black (it is still on).
I tried also to connect my phone to the computer- I received a list of 13 "new" local disks "H" to "T", only "H" disk is available and it's showing "image" folder with list of files.
I cannot reach "download mode", nothing is working!
I hope this is not the end for my G2..
please help me
Thank you so much!

If you could receive all those hard disks then you could maybe fix it with linux/ubuntu if you have it. Search for guides to cOpy the neccesary stuff bacK like the bootloader. I can't really help you atm as i am too sleepy.

wulsic said:
If you could receive all those hard disks then you could maybe fix it with linux/ubuntu if you have it. Search for guides to cOpy the neccesary stuff bacK like the bootloader. I can't really help you atm as i am too sleepy.
Click to expand...
Click to collapse
Thank you for your reply. I found this on the sticky threads: "[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2".
I installed ubuntu and followed the instructions. when I type the following: "gdisk -l /dev/sde" I receive an error message:
"GPT fdisk (gdisk) version 0.5.1
NOTE: Write test failed with error number 13. It will be impossible to save
changes to this disk's partition table!
Problem opening /dev/sde for reading! Error is 13
You must run this program as root or use sudo!"
My device is not rooted, is this the problem?
Please help me!!
Thanks

@NNCa It says you need to run the program as root on ubuntu.
Just use sudo in front of the commands.
You need to type once your password to use sudo, you can't see the password if you enter it for safety I guess but just click enter after you typed ykur password.

wulsic said:
@NNCa It says you need to run the program as root on ubuntu.
Just use sudo in front of the commands.
You need to type once your password to use sudo, you can't see the password if you enter it for safety I guess but just click enter after you typed ykur password.
Click to expand...
Click to collapse
Thank you so much!!
I succeeded to push all the files according to this thread, however I do not see the TWRP menu. I have just constant "LG" logo on screen.
Do I miss something?
Thanks!

NNCa said:
Thank you so much!!
I succeeded to push all the files according to this thread, however I do not see the TWRP menu. I have just constant "LG" logo on screen.
Do I miss something?
Thanks!
Click to expand...
Click to collapse
Well its good you're an step further, try to reboot to recovery using power+volume down i believe or its up idk try both it should say something about wipe data factory reset, press the power button and you are in recovery.

wulsic said:
Well its good you're an step further, try to reboot to recovery using power+volume down i believe or its up idk try both it should say something about wipe data factory reset, press the power button and you are in recovery.
Click to expand...
Click to collapse
Hi,
I powered off my phone by pressing volume down + power for a while ("LG" logo blinked once and phone was fully powered off).
I pushed volume down + power till I saw the LG logo, released it, and pushed again- and finally I reached the Factory Hard Reset screen. I have pushed 3 times the power, and I have got "Factory reset processing..." and nothing is appeared, even when I'm pushing several times on power again.
I guess this is the end of my G2 :crying:
Thank you all for your support, this is an excellent forum!:good::good:

NNCa said:
Hi,
I powered off my phone by pressing volume down + power for a while ("LG" logo blinked once and phone was fully powered off).
I pushed volume down + power till I saw the LG logo, released it, and pushed again- and finally I reached the Factory Hard Reset screen. I have pushed 3 times the power, and I have got "Factory reset processing..." and nothing is appeared, even when I'm pushing several times on power again.
I guess this is the end of my G2 :crying:
Thank you all for your support, this is an excellent forum!:good::good:
Click to expand...
Click to collapse
Nope it isn't the end try to install the recovery again or try to push the custom twrp recovery again to the right partition! Dont give up that fast when i hear your things then its still fixable! you already got the factory reset processing so try to Push the Recovery again and search for an guide about recovery maybe Then you would probably get your device fixed.
Just read my things about simplicity so think easy and you can fix it. AND STAY POSITIVE You will repair your phone today :good:

wulsic said:
Nope it isn't the end try to install the recovery again or try to push the custom twrp recovery again to the right partition! Dont give up that fast when i hear your things then its still fixable! you already got the factory reset processing so try to Push the Recovery again and search for an guide about recovery maybe Then you would probably get your device fixed.
Just read my things about simplicity so think easy and you can fix it. AND STAY POSITIVE You will repair your phone today :good:
Click to expand...
Click to collapse
Thanks, but after connecting the device to linux/windows, it seems that it is not recongized, I do not see the partitions anymore even when typing "ls /dev/sd*" through linux terminal..

NNCa said:
Thanks, but after connecting the device to linux/windows, it seems that it is not recongized, I do not see the partitions anymore even when typing "ls /dev/sd*" through linux terminal..
Click to expand...
Click to collapse
Yeah because the phone has bootloader etc again so maybe you can try this:
http://forum.xda-developers.com/showthread.php?t=2432476

wulsic said:
Yeah because the phone has bootloader etc again so maybe you can try this:
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Hi there,
I tried to flash my phone using the lg flash tool, unfortunately it cannot recognized any connected device through USB.. I don't know what else will work for my device

NNCa said:
Hi there,
I tried to flash my phone using the lg flash tool, unfortunately it cannot recognized any connected device through USB.. I don't know what else will work for my device
Click to expand...
Click to collapse
Did you already installed the LG drivers? and checked in device manager or there is like any change when you connect and disconnect your phone?

wulsic said:
Did you already installed the LG drivers? and checked in device manager or there is like any change when you connect and disconnect your phone?
Click to expand...
Click to collapse
Yes, I checked it- no response during connecting/disconnecting the device..
Maybe I did a mistake when trying to push those image files.. I guess there is nothing I can do to fix my phone..
Do you have any other suggestions?

Can someone please help me. How can I get to the LG device- Is there another software I can use to flash files into this device?
Thanks

NNCa said:
Can someone please help me. How can I get to the LG device- Is there another software I can use to flash files into this device?
Thanks
Click to expand...
Click to collapse
Sorry for late reaction but i needed to think of something. Did you tryed to use another cable? Did you tryed to do it on another pc? Did you tryed to maybe install LG PC suite and see if it gets recognized? If you have the PC Suite you may need to turn it off in the LG flashtool idk. Can you tell us more like which windows you have?

wulsic said:
Sorry for late reaction but i needed to think of something. Did you tryed to use another cable? Did you tryed to do it on another pc? Did you tryed to maybe install LG PC suite and see if it gets recognized? If you have the PC Suite you may need to turn it off in the LG flashtool idk. Can you tell us more like which windows you have?
Click to expand...
Click to collapse
Hi,
I tried all you suggested, however my devide is not recognized. I tried to use the LG PC Suite and to flash by IMEI, however it is still saying that no device was connected.. I checked windows device manager, and nothing changed there.
There is any chnage I can see my connected device? use some tool or another software?
Thank you again for your patience and help!

NNCa said:
Hi,
I tried all you suggested, however my devide is not recognized. I tried to use the LG PC Suite and to flash by IMEI, however it is still saying that no device was connected.. I checked windows device manager, and nothing changed there.
There is any chnage I can see my connected device? use some tool or another software?
Thank you again for your patience and help!
Click to expand...
Click to collapse
Hi, sorry to say but you have unfortunately completely hardbricked your device. It happened to me too however I was able to get it replaced under warranty at no extra cost.
What happened was that when your phone was still detected by linux, you had a chance to recover by flashing the correct partitions to gain access to download mode and from there, flash a KDZ to go back to complete stock. However, the files you used were probably incompatible with your variant which has now corrupted your bootloader sequence. I suggest you read this reply by fizzy177 as well as the rest of the thread: http://forum.xda-developers.com/showpost.php?p=51522304&postcount=118
So right now, you cannot do anything as you have already found out, no computer will recognise that your phone is plugged in. Your phone fails to boot when you try enter the download mode and it just freezes on the splash screen which looks like this: http://www.lg-phones.org/wp-content/uploads/2014/03/image2.png
What's meant to happen is your phone should load past that initial splash screen into this http://www.androiddunya.com/wp-content/uploads/2014/01/LG-G2-DownloadMode.jpg which accepts KDZ flashing and warns the device has been rooted.
So it's a blessing that your phone cannot boot as LG cannot find out you have voided warranty and you will be able to get a replacement free of charge.

Issue was solved- device was fixed under warranty
Hi,
I just want to update you all that my device was fixed under warranty! (motherboard replacement)
Thank you all for help and great support, this is a great forum with great community :good::good:

Hello
From past 2 weeks i am wondering on internet for a solution . Hours and hours of surfing and articles but still
Hope some one solve this issue.
Okay. First i m using LG G2 F320 K update to lollipop . Non rooted. It was working fine . I can transfer files in MTP .
But about a month ago i get an update for my phone . And after some days i need to transfer some files to my phone , i wonder when i connected my phone to computer nothing happened . No notification on mobile for changing PTP MTP option . Also nothing happened in Computer device manager..
From that day i am unable to connect my phone with windows 10. It always charging mobile.
I uninstalled all drivers in device manager and installed from LG website. I updates windows N and NK MTP update from windows for windows 10.
I changed different data cables and different computers and different ports . All stuff i can do. Still no luck.
When ever i plug USB data cable it always put my Mobile on Charging . No notification on Mobile. Also i go in setting > storage> and there is no option in upper right corner to select USB PC connection .
I am in developer mode and debugging mode is on also. Also USB tethering option is Disabled .
Kindly some one help me regarding this.
LG G2 F320K updated to stock Koren lollipop 5.0.1 . Non root.( i updated lollipop in April 2015)
Issue i am facing is no notification for Charging/ MTP/PTP Usb Debugging on mobile notice bar when i attach my phone using USB cord with computer. Also in computer device manager nothing happen. Even i checked on windows 10 , 8.1, 8, 7 .
I remember it was working like charm 4 weeks before I can change MTP PTP or Charge only mode by selecting notification when i attach it to my laptop. I can transfer files can use LG PC suit .
Then i received an software update like 40 mb and i updated my mobile. That i remembered.
After that 2 weeks before i need to transfer some books from laptop to my mobile. When i plugged my device there no notification to select MTP mode . Also there is nothing happened in my windows 10. I looked in task manager. No yellow icon in computer task manager for driver thing.
Laptop is just silent and mobile is just on charging .
Then i go to setting in LG and looked for USB PC connection settings. I wonder there is nothing . Settings > storage > 3 dot in upper right corner.. it suppose to be there . But here is no 3 dot in storage. Then i looked into share and networks in android setting and i found that USB tethering. But its faded mean it is disabled and i am unable to use this feature also.
I tried on different computers different cables , original, but nothing. Always when i plug usb mobile went on charging and in all computers nothing happen in device manager.
USB debugging is on.. I factory reset device 2 times. but useless. Also i uninstall all drivers from my laptop and then reinstall drivers from LG website also i tried google drivers , ABD, different ports. Nothing nothing happen.
Also now if i try put mobile on download mode by turning device off and then push + vol button and then put cord in mobile . No download mode also it went on charging. Well charging from laptop or from charger is okay.
Hope i explain all.

[Q] [Display Bricked] - Want to make a backup

Hey there,
My LG D802 32GB just fall out of my car and the complete Display is bricked (I think Digitizer is also harmed) and I am not able to touch anywhere.
I know a lot about fastboot, adb and so on. But I do not really know much about this device, since I hadn't got the time to do so, too busy with other stuff. Unfortunately I disabled USB debugging a week ago after I finished some development stuff. And I just want to make a new backup (last one was a few weeks ago ) of my data before I try to repair anything or buy a new one.
I do not know why, but I cannot enter Stock Recovery (just keeps rebooting), Download Mode is working. Phone is also booting normally, just no way my fingers are recognized.
I tried to enter Recovery Mode (stock), to perhaps have adb access (don't know if it is so on d802), with Volume Down+Power, release when Logo appears and then press again, USB Cable was connected. I know i entered it once after buying this phone, but now I am not able to do so. Are there any special drivers which are perhaps missing (installed them with PC Suite, all upgrades were done with it, cause I do not like OTAs for several personal reasons).
Thank you very much for reading it and perhaps helping me!

just want to add something:
Also tried with LG Onscreen Phone, but also deactivated ...

Some recoveries can be used only with hard keys. Or use a mouse to navigate

Thank you for this great idea. Just ordered an OTG adapter.
What do you mean with hard keys? Volume Up/Down ?

akamarukiba said:
Thank you for this great idea. Just ordered an OTG adapter.
What do you mean with hard keys? Volume Up/Down ?
Click to expand...
Click to collapse
Yes exactly. I think cwm can Do this

Ok backup done... Could have thought about this simple option too...

[Q] [HELP] LG G2 D802 in coma - Really Deep, Hard and Seriously Bricked

A few posters here claim that the G2 is unbrickable - but I think I can challenge that. It started off with me wrongly flashing the Cloudy ROM 3.0 - what I didn't realise only till later was that it was intended for the Korean variant of the G2. Dummy move indeed.. I had previously taken the necessary precautions and took a full titanium backup and ROM backup onto a USB drive via TWRP - I previously ran Cloudy ROM 2.2 with Dorimanx Kernel on KK 4.4.2.
Right now, the phone doesn't seem to power on via buttons. When I plug it to the PC via the USB, I get "QHSUSB_BULK" as an unknown device only.. no black screen while on, no drives or COM port.
First off I want to be clear that I know I and only I am responsible for bricking my phone - The reason I'm in this mess is completely down to my stupidity, and trusting 'educated guesses' instead of confirming specs black of white. Just wanted to be clear in case anyone gets the wrong impression.
So this is more or less the sequence of events;
1. After flashing, I got stuck in fastboot mode.. (can't find the link) I followed one post where I needed to flashed .img files via the Fastboot CLI (similar to ADB). I used the images from the LG G2 D802 16GB in europe. source.. It was a toss up between the EUR and non EUR, and so I made the first of my so called 'educated guesses' that sent this phone deeper into the ground.
2. Something went wrong as when I rebooted the phone (had no idea what had gone wrong at the time), I got no logo. After some time, I noticed the screen on with a black background. when plugged into the pc, the QHSUSB_BULK would appear and with it a bunch of drives that Windows thought needed repairing. so I followed This .. I installed ubuntu, booted to terminal so I don't get those auto discovery pop ups, I used the images recommended there for my device (again, it seemed to make sense to use the same that the OP was using for my LG G2 D802 16GB in europe... After I rebooted, it was to my horror that the screen didn't even turn on, with no drives being detected via USB.. just the QHSUSB_BULK. This is what made me realise that the culprit was most probably using wrong images rather than improperly executing the instructions.
3. I opened the phone and tried shorting some capacitors where I'm supposed to see the drives again to no avail. I even tried shorting the capacitors ends as described here to no avail. I done a good full hour shorting the hell out of those capacitors (the post says to keep at it till it works cos it can sometimes be a bit tricky) but I saw no change. I would like to try the DL mode described there but I can't figure out what I have to ground from the images shown in the post regarding the "BOOT CONFIG".
This is basically the state the phone is in at the moment. so to recap:
No bootloader,
no recovery,
no fastboot,
no download mode,
no drives when in QHSUSB_BULK mode,
no COM port.
From the multitude of unbricking guides here, I gather that I either need to see that bunch of drives again when via USB or a COM port. I tried installing Qualcomm drivers, thinking that if the pc recognises the device, I might get the pc to identify the COM port, but the driver couldn't be installed for the QHSUSB_BULK device (got some error.. I can update this post later).
I tagged this post as a question.. i'm sure there's a question here somewhere...
HELP?!

bump.
Could really use a little help... anything

kuwlij said:
bump.
Could really use a little help... anything
Click to expand...
Click to collapse
You can ask @somboons
he came from deep hard bricked.
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
http://forum.xda-developers.com/showpost.php?p=56608822&postcount=2
http://forum.xda-developers.com/lg-g2/development-d802/tools-mini-srk-tool-d802-t3098163
:good:

.
...

When I first tried to enter QHUSB_BULK mode on mine, I took ages. Seriously, ages. It kept not showing the drives. Important thing to remember, in my opinion, is to use Linux (latest Ubuntu in my case). If you keep trying, eventually they will pop up for a split second. I can't remember how I did it, but you have to use a partition tool, I think, to get it to freeze the positions of the drives. Then, once it's 'mounted' them, you can try (and keep trying) to flash to each partition.
Mine was well and truly screwed, so I flashed a blank partition table on, then flashed each image onto that. It took a lot of trial and error, though, because it kept not showing the drives.

furzewolf said:
When I first tried to enter QHUSB_BULK mode on mine, I took ages. Seriously, ages. It kept not showing the drives. Important thing to remember, in my opinion, is to use Linux (latest Ubuntu in my case). If you keep trying, eventually they will pop up for a split second. I can't remember how I did it, but you have to use a partition tool, I think, to get it to freeze the positions of the drives. Then, once it's 'mounted' them, you can try (and keep trying) to flash to each partition.
Mine was well and truly screwed, so I flashed a blank partition table on, then flashed each image onto that. It took a lot of trial and error, though, because it kept not showing the drives.
Click to expand...
Click to collapse
Mine was exactly the same I also had a blank partition table.. Anyway just keep trying because It took me a while to get mine working.. I was trying to short the capacitors but it seems to be quite hard sometimes especially if you aren't carefull.. Because you can start to mess with the soldering of the capacitors and it'll be harder after that.. It happened to me..
Anyway here's something I've wanted to ask everyone, after I sucessfully put my phone back to life, it seems like the middle button isn't working, the LED and the volume rockers are fully working, but if I ever press the power button after some time it shutdowns just like if I pressed and hold for a while, has anyone got this problem? It seems like the flex cable or something is damaged but i wanted to be sure it's really damaged or just something I could solve.. thanks and sorry for the off topic..

kuwlij said:
bump.
Could really use a little help... anything
Click to expand...
Click to collapse
This
HTML:
http://forum.xda-developers.com/showthread.php?t=2582142
saved my D802.Take time to read all post

Can't get ROM onto Nexus 7 to flash it

Hi all,
I made a really dumb mistake, a while ago I installed TWRP on my nexus 7 then downloaded and flashed Nethunter onto it (and no I didnt take a backup first, which was really silly), for a while I have had some issues with updating it, so after a few days of googling and not getting anywhere I thought the best course of action was to re-flash it. I then made another stupid mistake of formatting everything first only to find I had removed the ROM file from my Nexus.
So, I am now in the situation where I dont see a way I can get the ROM onto the device as it has no OS and doesnt power on (just get the Google Logo and doesnt go any further) I have tried inserting a USB external drive via the USB OTG port but the drive just makes a funny whirring noise and doesn't power on properly. I was going to try a USB key just to see how that would fair.
Can anyone offer any advice on how I can get the ROM onto the Nexus?
Thanks

Did you already try to boot into bootloader (vol- & power)? Probably you need to keep the buttons pressed for round about 20 sec. If you are getting there you can most likely go on, otherwise it will become more complicated.

actually managed to sort it, I found that I could side load the ROM using ADB, backup and running now
bugs789 said:
Hi all,
I made a really dumb mistake, a while ago I installed TWRP on my nexus 7 then downloaded and flashed Nethunter onto it (and no I didnt take a backup first, which was really silly), for a while I have had some issues with updating it, so after a few days of googling and not getting anywhere I thought the best course of action was to re-flash it. I then made another stupid mistake of formatting everything first only to find I had removed the ROM file from my Nexus.
So, I am now in the situation where I dont see a way I can get the ROM onto the device as it has no OS and doesnt power on (just get the Google Logo and doesnt go any further) I have tried inserting a USB external drive via the USB OTG port but the drive just makes a funny whirring noise and doesn't power on properly. I was going to try a USB key just to see how that would fair.
Can anyone offer any advice on how I can get the ROM onto the Nexus?
Thanks
Click to expand...
Click to collapse