Hi. I want to create a flashable zip file from the latest TWRP .img file and the latest CWM .img file. Can someone please point me in the right direction? I've searched all over google and couldn't find what I was looking for.
Thanks,
Mike
Google i337 twrp zip xda
jd1639 said:
Google i337 twrp zip xda
Click to expand...
Click to collapse
Thanks for the reply, but I still can't find what I'm looking for. I want to take the twrp.img or cwm.img file and create a flashable zip from it. I see that you've done it for twrp, do you mind sharing how you did it ?
Thanks again,
Mike
mmcneil said:
Thanks for the reply, but I still can't find what I'm looking for. I want to take the twrp.img or cwm.img file and create a flashable zip from it. I see that you've done it for twrp, do you mind sharing how you did it ?
Thanks again,
Mike
Click to expand...
Click to collapse
Download the zip and extract it. All you need to do is drag and drop the recovery image you want in it, cwm or twrp and delete the one that's currently in there. Then navigate to the updater-script (it's deep inside the meta-inf folder) and edit it with notepad++ It'll become self explanatory once you look through the zip file. When you'll all done just zip it back up. You'll have a flashable recovery zip.
Ps, I use 7-zip to extract and zip
jd1639 said:
Download the zip and extract it. All you need to do is drag and drop the recovery image you want in it, cwm or twrp and delete the one that's currently in there. Then navigate to the updater-script (it's deep inside the meta-inf folder) and edit it with notepad++ It'll become self explanatory once you look through the zip file. When you'll all done just zip it back up. You'll have a flashable recovery zip.
Click to expand...
Click to collapse
Thanks jd.
Mike
mmcneil said:
Thanks jd.
Mike
Click to expand...
Click to collapse
No problem, if you have any questions just post them here.
Related
Please forgive me guys if this has been asked before ..........I've searched the forum without success......but my problem is with this
;
Universal_GB_ROOT_v9.zip mediafire.com/?a99wthh9p98bm0y
I followed the advised procedure but when I get to the choices screen and select install from SD Card, I am then shown this list of options:
../
.android_secure/
Android/
DCIM/
LOST.DIR/
META-INF /
system/
Where do I start, I have tried going through in sequence with no success/response, I have then tried just selecting META-INF / & system / in sequence, again no joy....... could someone give this inquisitive old duffer a walk through, or show me what I'm doing wrong, PLEASE:fingers-crossed:
You are not supposed to extract the zip. Just select install zip from sd card, then select the root zip. Don't extract it and you will be fine.
Vedarshi said:
You are not supposed to extract the zip. Just select install zip from sd card, then select the root zip. Don't extract it and you will be fine.
Click to expand...
Click to collapse
Thanks for the quick reply......I have not extracted anything, I just downloaded the zip file went nowhere near extraction and the file in my SD card says META INF & system, no where is it named as zip.
Would you by any chance have a good link for the zip file instead.....be grateful.
You're using apply update from SD card in CWM right?
Well location of your zip file should be..
/sdcard/*here*
If you are using atock recovery then the zip file should be on top of the list.. It SHOULD be a .zip file
if you are using clockworkmod recovery then the .zip file will be at the end of the list.. Good luck
Press thanks if i helped you
Khizar Amin said:
Well location of your zip file should be..
/sdcard/*here*
If you are using atock recovery then the zip file should be on top of the list.. It SHOULD be a .zip file
if you are using clockworkmod recovery then the .zip file will be at the end of the list.. Good luck
Press thanks if i helped you
Click to expand...
Click to collapse
Thanks to everyone for patience and assistance.........sorted now:victory:
Can someone show me a way to reseal File/Folder to System.img.
I extract these file/folder from Stock Nexus 4 zip. What I want to do is install a font then zip it back to System.img so I can flash it.
Thank
ronnyckb said:
Can someone show me a way to reseal File/Folder to System.img.
I extract these file/folder from Stock Nexus 4 zip. What I want to do is install a font then zip it back to System.img so I can flash it.
Thank
Click to expand...
Click to collapse
There are ways to repack it (I've never done it myself, but if you search, you'll probably find some tools), but there is an easier way to just install a font: package it up in a recovery-flashable zip. A guide on how to create recover-flashable zips can be found here.
Trying to flash CopperheadOS with multirom on N6P.
But I can't flash the image in TWRP so I'm trying create a flashable zip.
But problem is all the guides and tutorial are very outdated (with most of them mentioning "Android Kitchen")
Where should I go to find help for this?
/Omen
If you are on the latest TWRP, you can flash an image file to the system partition by clicking the Install Image button when selecting a file to install.
nathanchance said:
If you are on the latest TWRP, you can flash an image file to the system partition by clicking the Install Image button when selecting a file to install.
Click to expand...
Click to collapse
That way doesn't work because I use multirom, it has a modified TWRP (it's still the latest version doh)
Sorry for shameful bump but I can't find an answer whatsoever
nathanchance said:
If you are on the latest TWRP, you can flash an image file to the system partition by clicking the Install Image button when selecting a file to install.
Click to expand...
Click to collapse
In what I have been able to find there was a META-INF folder that was a part of the back-ups now all I see from my stock backup is .win files, not tar.md5
Now I can guess that the naming is still similar so can you compress the system.ex4 files and have the same process with a file format change.
I had 50pc japan version of s5(sc-04f), installed rom 'G900F.STOCK.FOR.SCL23.FULL.MINHQUAN'. The downside of this rom is that its pre-rooted. I managed to unroot it by goin in supersu & click 'full-unroot'. But i had multiple devices to flash, so is there a way for me to re-pack this firmware again after i unroot it? So that i could flash it to my other devices without root.
wee2000 said:
I had 50pc japan version of s5(sc-04f), installed rom 'G900F.STOCK.FOR.SCL23.FULL.MINHQUAN'. The downside of this rom is that its pre-rooted. I managed to unroot it by goin in supersu & click 'full-unroot'. But i had multiple devices to flash, so is there a way for me to re-pack this firmware again after i unroot it? So that i could flash it to my other devices without root.
Click to expand...
Click to collapse
Your best bet is to post this question within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=2700073
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
ok done, thx 4 the info
just in case if i missed the reply there, hope someone could reply me here?
when i extract the ZIP file, i got
METE-INF folder
boot.img
system.img
just in case if i missed the reply there, hope someone could reply me here?
when i extract the ZIP file, i got
METE-INF folder
boot.img
system.img
wee2000 said:
just in case if i missed the reply there, hope someone could reply me here?
when i extract the ZIP file, i got
METE-INF folder
boot.img
system.img
Click to expand...
Click to collapse
Should we search for this firmware or you can provide a link to its thread?
the link is here : https://choimobile.vn/threads/6-0-1-scl23-stock-rom-g900f-full-port-v3-by-huaminhquan93.37412/
wee2000 said:
the link is here : https://choimobile.vn/threads/6-0-1-scl23-stock-rom-g900f-full-port-v3-by-huaminhquan93.37412/
Click to expand...
Click to collapse
Generally, if it's 6.0.1 and rooted systemlessly, you need to replace boot.img with a stock one and remove SuperSU app from system.img.
This ROM intended to be flashed from TWRP, so it's an ext4 image.
You can mount it to a linux system on your PC and remove anything you want.
I havent done anything like this before. Could u give me some links or guides? My PC is running Windows 10.
wee2000 said:
I havent done anything like this before. Could u give me some links or guides? My PC is running Windows 10.
Click to expand...
Click to collapse
Ok, here' a simpler way:
1. Make changes on one phone.
2. Make a TWRP backup of boot and system partitions.
3. Restore this backup on other phones. They must have TWRP installed, a 6.0.1 bootloader and modem.
You'll have to rename backup's folder path and to wipe cache/data/system before restore.
can i use winrar to extract & compile the rom, without linux? So that i will have a much faster flashing process for all other units..
wee2000 said:
can i use winrar to extract & compile the rom, without linux? So that i will have a much faster flashing process for all other units..
Click to expand...
Click to collapse
Ok, I've managed to download that ROM at last.
The things look even simpler.
To prepare an "unrooted" ROM:
1. Download the zip form this post and unpack updater-script somewhere.
2. Make a copy of V3.G900F.STOCK.FOR.SCL23.FULL.MINHQUAN.zip, open it with Windows Explorer and replace V3.G900F.STOCK.FOR.SCL23.FULL.MINHQUAN.zip\META-INF\com\google\android\updater-script with the file you've unpacked from the attachment.
3. Try to flash ans see if it's what you need.
thx so much, already passed all units to the buyer. ill try that on next batch restock, may iknow if there's a way to get the service menu shortcode *#0*# to work again? This rom doesn't has the service menu.
bbsc said:
Ok, I've managed to download that ROM at last.
The things look even simpler.
To prepare an "unrooted" ROM:
1. Download the zip form this post and unpack updater-script somewhere.
2. Make a copy of V3.G900F.STOCK.FOR.SCL23.FULL.MINHQUAN.zip, open it with Windows Explorer and replace V3.G900F.STOCK.FOR.SCL23.FULL.MINHQUAN.zip\META-INF\com\google\android\updater-script with the file you've unpacked from the attachment.
3. Try to flash ans see if it's what you need.
Click to expand...
Click to collapse
I've replaced the updater-script in the zip file, but supersu is still there
I need a zip firmware file for nokia 6 TA 1021. Because my nokia 6 can not flash with OST. However, I can flash the zip file by recovery 3.2.1. Thanks.
P / s: My English is very bad. sorry
letgol said:
I need a zip firmware file for nokia 6 TA 1021. Because my nokia 6 can not flash with OST. However, I can flash the zip file by recovery 3.2.1. Thanks.
P / s: My English is very bad. sorry
Click to expand...
Click to collapse
I already shared the firmware here: https://forum.xda-developers.com/showpost.php?p=75076587&postcount=7
This is the September version. In order to get to the newest version of Nougat, you have to install the update zips one by one. They are on the forum too.
Happy flashing
ZeroPointMax said:
I already shared the firmware here: https://forum.xda-developers.com/showpost.php?p=75076587&postcount=7
This is the September version. In order to get to the newest version of Nougat, you have to install the update zips one by one. They are on the forum too.
Happy flashing
Click to expand...
Click to collapse
Now I have to flash 7z file by recovery?
letgol said:
Now I have to flash 7z file by recovery?
Click to expand...
Click to collapse
No, unzip the archive and then click on Edit phone Information on OST. You can do this while the archive is extracting to skip some wait time. Then open your favorite terminal program and flash the img files from the archives like this: (example with the included fastboot-android.exe on Windows)
fastboot-android.exe flash x x.img. X is the filename of the img file. You can look into my linked article to see which partitions you have to flash for a complete system reinstall. Note: if you flash recovery, your twrp will be replaced by the stock recovery.
ZeroPointMax said:
No, unzip the archive and then click on Edit phone Information on OST. You can do this while the archive is extracting to skip some wait time. Then open your favorite terminal program and flash the img files from the archives like this: (example with the included fastboot-android.exe on Windows)
fastboot-android.exe flash x x.img. X is the filename of the img file. You can look into my linked article to see which partitions you have to flash for a complete system reinstall. Note: if you flash recovery, your twrp will be replaced by the stock recovery.
Click to expand...
Click to collapse
Thank you. I will try
ZeroPointMax said:
No, unzip the archive and then click on Edit phone Information on OST. You can do this while the archive is extracting to skip some wait time. Then open your favorite terminal program and flash the img files from the archives like this: (example with the included fastboot-android.exe on Windows)
fastboot-android.exe flash x x.img. X is the filename of the img file. You can look into my linked article to see which partitions you have to flash for a complete system reinstall. Note: if you flash recovery, your twrp will be replaced by the stock recovery.
Click to expand...
Click to collapse
Thank you. I did it
letgol said:
Thank you. I did it
Click to expand...
Click to collapse
:good: