Hi Guys, I have had this phone for around a week now. I have it rooted and installed a T-mobile ROM. The problem I am having is that I cannot do the 3 button trick. I have been browsing the forums and everyone who is having this problem is told to exchange it.
Since I have a different ROM, and accidentally wiped my phone during the install not very smart on my behalf). My phone boots up with this ugly pink "stick together" logo and irritating sound.
Is there a download where I can change it back to the original one that came with my Bell?
I originally posted this in the Vibrant section and realized that more Bell users were over here in the forum. Sorry for the double posting.
ayy yai yai viejo... this is complicated.
Where are you in Canada?
try these methods that people have tried,
http://forum.xda-developers.com/showthread.php?t=754673&page=3
some of them worked, some of them not, but still should try it, to at least get it to Download mode, so you can flash it back to the stock JG9 or JH2 ROMs
I am unable to do the three button trick, but through ROM manager I can load other ROMs. I just don't know where I can download a stock ROM?
I am located in Calgary, Alberta.
good, at least you got that working
go to the ROM Manager topic in Development section and ask for help there for the ROM that you need to fix the phone.
Thanks for your input guys, I actually ended up taking at back and told them I accidentally loaded the wrong ROM. And without the three button enabled I was unable to flash it back to the proper ROM. Thus killing two birds with one stone. And now I have a device that has the 3 buttons enabled.
nice! good to hear that
I'm facing a problem my note 3 N9005 is hard bricked , my phone bootloops when i flashed a rom so i flashed a stock rom, then suddenly my PHONE CAMERA FAILED to open, NO SOUND AT ALL in the phone NOT EVEN THE RINGTONES SOUND (hangs when pressing volume key rocker), PHONE DIALER DOESNT OPEN black screen appears when i try to open it and i have laggy phone and it hangs alot, HOPE GOOD DEVELOPERS WILL HELP
Things I have Tried : Flashed Stock Roms, didnt work
Flashed Stock Rom and rooted, didnt work .
Flashed Stock Rom Rooted and installed cwm recovery philz edition, didnt work.
Flashed Stock Rom with a PIT FILE , that too didnt work...
KNOWN DEVELOPERS HELP PLZ...Thanks in advance.:crying:
Flash a rom first and flash the attachment will solve your problem
masrooraly said:
I'm facing a problem my note 3 N9005 is hard bricked , my phone bootloops when i flashed a rom so i flashed a stock rom, then suddenly my PHONE CAMERA FAILED to open, NO SOUND AT ALL in the phone NOT EVEN THE RINGTONES SOUND (hangs when pressing volume key rocker), PHONE DIALER DOESNT OPEN black screen appears when i try to open it and i have laggy phone and it hangs alot, HOPE GOOD DEVELOPERS WILL HELP
Things I have Tried : Flashed Stock Roms, didnt work
Flashed Stock Rom and rooted, didnt work .
Flashed Stock Rom Rooted and installed cwm recovery philz edition, didnt work.
Flashed Stock Rom with a PIT FILE , that too didnt work...
KNOWN DEVELOPERS HELP PLZ...Thanks in advance.:crying:
Click to expand...
Click to collapse
Quick FYI and correction -
Hard Brick = Won't power on or do anything.
Soft Brick = Can still access the device - bootloop/power up/bootloader/recovery.
masrooraly said:
I'm facing a problem my note 3 N9005 is hard bricked , my phone bootloops when i flashed a rom so i flashed a stock rom, then suddenly my PHONE CAMERA FAILED to open, NO SOUND AT ALL in the phone NOT EVEN THE RINGTONES SOUND (hangs when pressing volume key rocker), PHONE DIALER DOESNT OPEN black screen appears when i try to open it and i have laggy phone and it hangs alot, HOPE GOOD DEVELOPERS WILL HELP
Things I have Tried : Flashed Stock Roms, didnt work
Flashed Stock Rom and rooted, didnt work .
Flashed Stock Rom Rooted and installed cwm recovery philz edition, didnt work.
Flashed Stock Rom with a PIT FILE , that too didnt work...
KNOWN DEVELOPERS HELP PLZ...Thanks in advance.:crying:
Click to expand...
Click to collapse
Did You ever tried a full wipe several times before and after flashing?
Post some more information.
1. Where did you buy the phone
2. PDA/CSC/Baseband
3. IMEI still displayed as a number or is it null/null
4. Do you have EFS, FSC, and FSG backups
5. Which stock rom(s) did you flash
It sounds to me as though you have been flashing the wrong stock rom for your device. The behaviour you describe sits in line with that.
i bought it From official Samsung Shop, and it was running like normal before this problem.
IMEI is ok, not showing null or anything like that.
didnt help
bhasg1007 said:
Flash a rom first and flash the attachment will solve your problem
Click to expand...
Click to collapse
I tried to do this but this too didnt help brother. Now what do you suggest
masrooraly said:
i bought it From official Samsung Shop, and it was running like normal before this problem.
IMEI is ok, not showing null or anything like that.
Click to expand...
Click to collapse
Okey you need to get EFSBackupPro and use it to backup efs and fsc and fsg partitions. Just Google it and you will find a link to the thread here on xda.
After that you need to tell us what is the phone model. Look at my signature to see what a model looks like.
I think you flashed the wrong stock ROM. We need to find out which model phone you have so we can link you to the correct n9005 stock ROM.
You must make efs backup first. You can lose your imei and I have not seen a working method to fix the phone if that happens.
Efsbackuppro has bricked Note 3's previously. I wouldn't advise it.
Sent from my LG-D855 using XDA Premium 4 mobile app
radicalisto said:
Efsbackuppro has bricked Note 3's previously. I wouldn't advise it.
Sent from my LG-D855 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not sure about what happened in those case. It is quite literally a GUI that runs a few dd commands, that's it.
didnt help
bhasg1007 said:
Flash a rom first and flash the attachment will solve your problem
Click to expand...
Click to collapse
Tried this but didnt solve the prob brother, i have tried fashing several stock roms but still problem exits.. Phone has no sound at all , Camera Says error Camera Failed , Phone hangs like a hell lockscreen lag And Phone App is not working. when ever any call comes screen goes black and i cant access the call atend or decline it. please tell me any fix for these 3 things..
AO7 said:
Post some more information.
1. Where did you buy the phone
2. PDA/CSC/Baseband
3. IMEI still displayed as a number or is it null/null
4. Do you have EFS, FSC, and FSG backups
5. Which stock rom(s) did you flash
It sounds to me as though you have been flashing the wrong stock rom for your device. The behaviour you describe sits in line with that.
Click to expand...
Click to collapse
i have tried fashing several stock roms but still problem exits.. Phone has no sound at all , Camera Says error Camera Failed , Phone hangs like a hell lockscreen lag And Phone App is not working. when ever any call comes screen goes black and i cant access the call atend or decline it. please tell me any fix for these 3 things..
I have the exact same problem and I think it's a hardware problem. This was happening to me yesterday and is not related to software. I think it's the sound IC or dac.
Sent from my SM-N9005 using Tapatalk
After flashing stock rom, do FULL WIPE using recovery.
You did not mention doing it.
I did this and no change. As I mentioned I don't think this is a software problem. I did remove cameras and usb charging port even the upper hedfone port and is the same behaviour. One of the iC is malfunction . I did stop everything that is related to sound and I use now my phone as a tablet with no sound and recording capabilities.
Sent from my SM-N9005 using Tapatalk
L.E.
After I was looking over schematic of motherboard and online for similar hardware defect I think is the audio codec IC WCD9320 that need to be re-balled or replaced. On the MB it has the the code U707. I will try this tommorow.
CHECK
I did not seen any Note 3 with full sound hardware bullit , but I faced to not have sound when I flashed a different firmware and I tryed t update trough ODIN to the last firmware nf3 nf4 TRY THAT AND put your news here , DON'T TRY TO OPEN YOUR PHABLET DOES NOT HAVE PRB AND ALSO SAMSUNG INFO app from play... you will se your hardware is ok and also your sound codecs )::)) ODIN 3.07 is the most stable >LAST FIRMWARE (UPGRADE) PROBABLY TO TRY INSERT YOUR CSC AND PIT Country files ( AREA CODE for example XEO mine )
I did reheat al the components on the main board. Nothing happened. But... i did reflash (as a last try)with mobile odin the last build from south est of Europe and miracle happened is up and working well.
Hello,
I'm from Brazil and own a Galaxy Express. Used szezso tutorial to install cyanogen 11 on it.
http://forum.xda-developers.com/showthread.php?t=2792157
Due to GPS instability, I was inclined to use warranty, so I had to return to stock rom.
And here begins the trouble. After goin back to the stock rom, my cellphone went mute (notification, ring, call, recording and media play), I can make calls, it has signal, but I cant hear the person on the other side. The cellphone will eventually hang when entering in standby mode, also. It hangs with the screen off and I have to remove battery.
The stock rom I'm trying to install is I8730UBAMC2_I8730ZVVAMC2_ZVV.zip (VIVO) which I obtained in sam mobile, I ve tried another brand rom (TIM) with almost the same result. It's weird because I could reinstall the same stock rom before, it's the second time I have to this.
Now I'm trying to go back to cyanogen but Framaroot is not able to instal SU, and now I dont know what to do I'm desperate.
Well, thanks for your help,
FYI I managed somehow to make framaroot work via Gandalf method and was able to reinstall Cyanogen.
The funny thing is, after I flashed I8730XWAMK1 using CP-button in ODIN (following Svennen tut) the sound was restaured, meaning that my phone got dependent on this baseband to work.
Does that mean I cant flash the stock rom anymore (the one I used to flash before), thus I cant have warranty back?
Ages ago because i was impatientto update my phone so i flashed the Polish Stock using Odin, since then i have used Odin to flash the UK Stock, though when i wipe and reset the phone it still initially comes up with the polish language, (not a massive issue i know but i want to get UK OTA if it ever comes) also if i go to sell the phone at the end of this year when the Note5 is out im sure the new owner would want to turn it on and see english.
Ive tried
Clearing the EFS cache and resetting the phone from recovery before and after flashing BTU
I made sure reactivation lock was off as I wondered if that would cause an issue though that hasn't helped. does anyone have any other ideas?
Im un-routed as i sometimes use my phone to test out corporate BYOD so cant root of flash a custom rom.
thanks all for any help.
ooMoo said:
Ages ago because i was impatientto update my phone so i flashed the Polish Stock using Odin, since then i have used Odin to flash the UK Stock, though when i wipe and reset the phone it still initially comes up with the polish language, (not a massive issue i know but i want to get UK OTA if it ever comes) also if i go to sell the phone at the end of this year when the Note5 is out im sure the new owner would want to turn it on and see english.
Ive tried
Clearing the EFS cache and resetting the phone from recovery before and after flashing BTU
I made sure reactivation lock was off as I wondered if that would cause an issue though that hasn't helped. does anyone have any other ideas?
Im un-routed as i sometimes use my phone to test out corporate BYOD so cant root of flash a custom rom.
thanks all for any help.
Click to expand...
Click to collapse
Download Phone INFO Samsung from Play and check the CSC.
But it might be you are rebooting into DL mode instead of shutting down the phone then starting it in DL mode. I usually remove the battery for a bit and hold the power button for a few secs to make sure the mainboard is completely discharged. Odin (& other methods) all have problems changing BL and Modem if you just do a reboot into DL.
You might want to take a look at Multiboot and Recovery for the possibility of having the ROM you want, rooted etc. AND still have a stock ROM you can choose to boot into for work purposes.
Hello all,
I recently discovered that my S5 was only running KitKat despite Marshmallow having been released for it. I checked for OTA updates and it found nothing, so I decided to flash a custom 6.0 ROM onto it (and for some reason I ended up deciding not to make a backup of the phone beforehand, the ultimate mistake).
The problem became that it didn't recognize Tracfone for my service provider and wouldn't connect to the mobile network. I then downgraded it to a 5.0 ROM, and it no longer even recognized the SIM card, saying there was none.
So I tried to flash the original stock ROM a few times, but every time either got errors from ODIN, the phone itself, or the TWRP bootloader.
Long story short, I seem to have screwed up multiple times trying to install a ROM to get around KitKat and now my phone appears to be softbricked. I can get into the TWRP menu and the "download" mode, but when trying to start the phone, it sits on the "Samsung Galaxy S5" screen with the "Set Warrenty Bit : kernel" text at the top left.
I'm just wondering if there's a way to fix it at this point, or if I've completely trashed the phone.
If anybody has suggestions or experience with this, all help is welcome!
Thanks!
MevNav said:
Hello all,
I recently discovered that my S5 was only running KitKat despite Marshmallow having been released for it. I checked for OTA updates and it found nothing, so I decided to flash a custom 6.0 ROM onto it (and for some reason I ended up deciding not to make a backup of the phone beforehand, the ultimate mistake).
The problem became that it didn't recognize Tracfone for my service provider and wouldn't connect to the mobile network. I then downgraded it to a 5.0 ROM, and it no longer even recognized the SIM card, saying there was none.
So I tried to flash the original stock ROM a few times, but every time either got errors from ODIN, the phone itself, or the TWRP bootloader.
Long story short, I seem to have screwed up multiple times trying to install a ROM to get around KitKat and now my phone appears to be softbricked. I can get into the TWRP menu and the "download" mode, but when trying to start the phone, it sits on the "Samsung Galaxy S5" screen with the "Set Warrenty Bit : kernel" text at the top left.
I'm just wondering if there's a way to fix it at this point, or if I've completely trashed the phone.
If anybody has suggestions or experience with this, all help is welcome!
Thanks!
Click to expand...
Click to collapse
Are you sure you have the stock firmware for the 902l and not the 903vl? The reason you didn't get the update for 6.0 is you have the 902l model. If you had the 903vl model you'd have 6.0. Straight talk never released it for the 902l model. No idea why being both models are very similar. Im not sure but if you make it back to stock on kitkat. I think you can use safestrap from the Verizon s5 to use some custom roms that run kitkat. If your bootloader is in fact unlocked and you can install a custom recovery other then safestrap. I believe you can install pretty much anything but I'm pretty sure straight talk ships the phones with the Toshiba chip so the bootloader isn't unlockable