Hallo, I have one question, some apps in last quarx Nightly 4.4 from 30.6 lossing GPS signal - ENDOMONDO and SYGIC. This problem had Nexus 5 too after actualization from 4.3 to 4.4
Problem is then after GPS lock Endomodno lost signal (that take 2s) and GPS icon is not more in status bar.
This is problem only with ENDOMONDO version up 10.0, before was all ok.
Im sure thats is only soft problem other apps are ok. With CM 10...and 7... ENDOMODO works.
Sry for my english.. : (
Having the same problems at least since KitKat with Endomondo (and as far as i can tell runtastic, too). It's pretty annoying to run like half an hour and never know the real distance. Seems like GPS is switched off when screen goes dark. I'ld take my Photon Q to track my runnings, but it won't fit into my sportswear pockets … any ideas?
I was on Illusion rom and tried PA 4.4.4 (4.45) for a change, but still the same. The GPS-fix also did not help. It's freaking me out.
Edit: Will try this tomorrow …
Endomondo works for me… I have CM11 and the latest Endomondo from the Play Store.
Hi,
I have a samsung galaxy express i8730 with cyanogenmod 11 (4.4.4).
Does cyanogenmod work with android wear?
Sebastiaan
sebastiaann said:
Hi,
I have a samsung galaxy express i8730 with cyanogenmod 11 (4.4.4).
Does cyanogenmod work with android wear?
Sebastiaan
Click to expand...
Click to collapse
So far i know it works
Sent from my LG-D855 using XDA Free mobile app
I have an S4, and I haven't gotten mine to work on CM 11. I mean it does, but not very well. Gonna switch to a TW rom tonight.
S4 running CM11 and no issues with my LG g watch. Everything comes through with no disconnects.
Sent from my GT-I9505 using XDA Free mobile app
sebastiaann said:
Hi,
I have a samsung galaxy express i8730 with cyanogenmod 11 (4.4.4).
Does cyanogenmod work with android wear?
Sebastiaan
Click to expand...
Click to collapse
I'm using CM 11 (4.4.4) on a S4 with Android Wear. No issues that I can see so far.
On Nexus 5, anything other than stock doesn't work well. Watch disconnects too often to be usable (bluetooth stack is dodgy on aosp or CM).
The fix is to flash Elemental kernel. Problem solved. This kernel is available for both aosp and CM.
Even in stock rom, if you flash another kernel, like franco kernel, the watch becomes unusable.
Again, the fix is to flash Elemental, with gives you the added bonus of enabling screen calibration for nice poping colors.
It took me time to discover all this. And frustration.
lost network connection
Hello I installed cm 10.2 through flash recovery. Onti my galaxy ace 2GT I8160 was gingerbread 2.3.6
Now its team conja jls361 if ive looked in the rite plce i still have iemi number and can recieve messages
But when i try and send or call it say no network ive been on to 3 my provider and they say its the phone
Please could you help with thi ive read it happens alot with this release of cm.. Would installing cm 11 sort it out im a newbie to being root ive already soft bricked it once so can see it being a bumpy ride so all the help i can get the better thank you
Also I looked at the build list and the radio and boitloader are unknown the biitloader has been like that when i got the phine that's bootloader not biitloader or bout loader dam key pad lol
My kernal is a i8160xxlk8 or it was I dunno if it still is
Connecting, running sync loop
Latoc said:
On Nexus 5, anything other than stock doesn't work well. Watch disconnects too often to be usable (bluetooth stack is dodgy on aosp or CM).
The fix is to flash Elemental kernel. Problem solved. This kernel is available for both aosp and CM.
Even in stock rom, if you flash another kernel, like franco kernel, the watch becomes unusable.
Again, the fix is to flash Elemental, with gives you the added bonus of enabling screen calibration for nice poping colors.
It took me time to discover all this. And frustration.
Click to expand...
Click to collapse
Any ideas for running CM on the galaxy s3? Android wear will not switch to connected, shows, "connecting, running sync loop". Most functions work OK but the watch is dying terribly quick. I know the moto 360 battery is supposed to be iffy, but I should get more than 4-5 hours....
Garrett 77 said:
Any ideas for running CM on the galaxy s3? Android wear will not switch to connected, shows, "connecting, running sync loop". Most functions work OK but the watch is dying terribly quick. I know the moto 360 battery is supposed to be iffy, but I should get more than 4-5 hours....
Click to expand...
Click to collapse
I don't know about s3, but you should try a few kernels and see what works...
FIXED
Latoc said:
I don't know about s3, but you should try a few kernels and see what works...
Click to expand...
Click to collapse
Well,
I tried a different kernel and still same issue. I flashed a TouchWiz based rom and it WORKED. Shows "connected". Battery life on moto 360 also vastly improved. Went from dead at 3:30 PM to 45% at same time!
I'm on DarkCM(11) for the xperia z1 and can't get it to work either.
Tested on my brothers stock xperia and that worked just fine. Il try downgrading to stock as well. :'(
If anyone gets CM on the z1 running with android wear please let me know.
I have a Oneplus One CM 11S works great on my old Gear Live and my new Sony Smartwatch 3
I read that MOTO 360 has (had) issues ?? Maybe the watch not the phones OS
Hi. My first post here and very New to all this. I have Samsung S4 with cm11 just got an Samsung galaxy gear2 neo and now i have to figure out how to get it to work with cm11 ? Can some body help
TechieInAK said:
I'm using CM 11 (4.4.4) on a S4 with Android Wear. No issues that I can see so far.
Click to expand...
Click to collapse
Sorry for bringing up an old post. I wanted to check in on your Android Wear connection to CM ROMs. I have a Sprint S4 (jfltespr) running CM12. I will be getting a LG G Watch R in a few days but someone else on our ROM thread was having issues with his Moto 360 and the CM12 ROM. Have you experienced any issues not connection or remaining in a sync loop?
Has anyone else experienced Android Wear issues with CM 11 or CM 12 on S4 phones? Particularly jfltespr?
Cant speak for the S4 but my LG G3 has had nothing but issues with my G Watch R since I flashed CM12. I reverted back to CM11 (recent build) and its working great, never disconnects. With CM12 it would disconnect at least 10-20 times a day its unusable.
I just installed the Google Play Edition Lollipop on my GS4 and it paired perfectly with my ASUS ZenWatch. Lollipop AOSP is AMAZING and i am so stoked it works so great!
Garrett 77 said:
Any ideas for running CM on the galaxy s3? Android wear will not switch to connected, shows, "connecting, running sync loop". Most functions work OK but the watch is dying terribly quick. I know the moto 360 battery is supposed to be iffy, but I should get more than 4-5 hours....
Click to expand...
Click to collapse
"Connecting, running sync loop" is just a different message for the same thing - it is activated on some ROMs(?) apparently when you have Developer mode enabled. But it works the same, and this message in itself doesn't indicate there should be any battery drain.
Of course something in the ROM might be causing this problem - a logcat from the watch would help in that case, but my guess is you just need to let everything install, settle down and then reboot both devices, and the drain will be gone...
My Zenwatch works perfectly with my Oneplus One running the latest CM11S. Having bluetooth on all the time does drain a bit more battery, but that's it.
I am having an issue with google wear (zenwatch) completing some tasks:
It fails to launch a phone call from google wear (my watch simply says "try again using your phone")
It fails to launch google play for music (it gives the same error as above)
Setting reminders using google keep (same error)
Text messages sent from android wear are NOT working.
Starting navigation on my watch using voice commands works.
Other basic apps appear to be working as well.
So far I've only noticed the above listed (maybe a few others) google apps and dialer that fail to launch when initiated from the watch, I have tried another dialer to see if that was the issue.
Anyone have any suggestions or insight on what I might be able to do in order to get google wear working 100% with this ROM?
Any help is greatly appreciated.
Mine works well
I have OnePlus One with CM11 and everything works quite well so far with my G Watch R
Hello Droid Geeks & Devs, a sincere advice/help needed .. just fed up off two major issues with my N4. Already tried many of the things available on forums but still the problem persists since 3 months now. So it's time I share my saga and possibly get the suggestions/fix or atleast a workaround.
OK, I'll start from the beginning.. I was and still am fully stock on Kitkat 4.4.4 and bootloader locked. I guess it was September during which i
updated my Google camera app from play store. And since this small update my N4 is ruined, my camera stopped working after a few hours ..only solution was to do a reboot & it would work fine for few hours and again "can't connect to camera". I thought a update might fix it but it didn't ..just forgot i had a camera in my phone for few months.
But guess what since October,the camera not working cycle was as it is, but the added problem was sudden infinite awake times in battery stats showing the cause of drastic battery drains (40% drain in nights to wakeup to drained dead phone in morning).again the temp fix was a reboot. But when i closely looked at the trends, I found the relation that while my camera is working the wake-locks are just fine, but the moment the cam stops working the continuous long Awake starts till it eats up all the battery and eventually lead to a reboot to be back to normal.Screenshots attached.
The upcoming Android 5.0 update in Nov was a major hope for me, that this should fix the bug.I happily sideloaded the lollipop update but still no luck ..in fact i have got added lollipop bug of WiFi drops for no reason.Also trying my luck with the new 5.0.1 lets see how it turns out.
Please help me with this issue. Thanks in advance.
Still no luck with 5.0.1
Please Anyone can suggest something ??
Sent from my Nexus 4 using Tapatalk
I have a Canadian Note 3 (SM-N900W8), it's KNOX 0x0 rooted and I have CM11 M12 installed. I have been using only the M builds since I got this phone, I didn't even set up Touchwiz when I got it, I rooted and installed Cyanogenmod out of the box.
Now, with the new CM12 builds coming out, what happened to CM11, are they going to fix the remaining issues? Or did they just bail on legacy KitKat users because I'm having TONS of problems and I don't want lollipop, it runs like absolute crap for the nightlies right now and CM11 M12 isn't much better. Bluetooth takes a couple of attempts to connect, when it does my phone runs super slow to the point it force restarts. For instance, if I'm driving around, listening to music on the car stereo, pull over some where, find a new album on Google Music, start playing that, it's all good, do this a few times, every time I use my phone it gets slower and slower until it force restarts and then bluetooth has trouble connecting again. I've tried this on a few other vehicles of different brands and aftermarket stereos and it's the same result.
Audio is all funky when bluetooth is on too, it sounds like robots for the system sounds and if bluetooth drops while it's connected the music starts playing from the phone and sounds all roboty. I always do clean flashes too and the latest Paranoid Android GAPPS every time I reflash, the ROM is fine out of the box, works flawless for the first few days but after awhile, it becomes so bad I have to backup, wipe, reflash, and start over for another few weeks.
Another issue is somewhere between M8 and M12 one of the builds corrupted my SD card, I tossed in a second new card, it was corrupted again, FutureShop won't give me another one and said my phone is breaking them so I'm SD-less right now.
There are also quite a few apps that force close, but always at random, it's never when doing the same thing over and over, for instance, I can be scrolling through G+ and it tells me settings has stopped working, wasn't even using settings, didn't even have it open, haven't clicked it since booting my phone, just randomly stops working for no reason, this also happens all the time with the Camera, it says it just stops working when I haven't even used it and then if I try to use it, it says the camera is disconnected and won't work until I reboot.
I turn my phone off every night while it's charging and turn it back on every morning so every morning it gets a fresh restart, and I have to restart my phone probably 5ish times a day, if I'm using bluetooth more then normal then there's quite a few more unintentional reboots in there as well.
The last issue, which is a known issue is NFC not working, is there a fix for this yet? I kinda miss this feature and with how flawed CM11 is getting I don't know where to turn since they always seemed to be the most stable out of everything I've tried.
Any before anyone says Temasek's CM builds, I tried it, the final for CM11, it was worse then M12, it's exactly the same as M12, but every issue happens more frequently. Also, the pull down menu (when pulling down from the top right to show toggles), the bottoms of the last row was cut off so it didn't look very appealing either, it also used WAY more battery life, I usually get a full day out of one charge, so around 18 to 20ish hours on one charge, with temaseks cm11 I had to charge my phone half way through the day, sometimes my phone would just die on me without me knowing, the battery usage was always Android System.
A new problem that just happened lastnight was Google Keyboard was deleted and only the voice search would work, but "voice search can't be reached" so I couldn't search for another keyboard app from the playstore. I also used the stock GAPPS so AOSP keyboard is replaced with Google Keyboard, I had to reflash again this morning because I couldn't figure out the keyboard thing, there wasn't even a keyboard under languages in settings so I had no options to pick which keyboard to use. When I reflashes this morning I used the Modular GAPPS to it keeps the AOSP Keyboard just in case this happens again but I'm getting really tired of only having a reliable phone for a few weeks.
So, are there any fixes for these issues?
Bluetooth taking multiple attempts to connect
Bluetooth forcing random reboots
Bluetooth making audio from device all funky and sounds like a robot
Corrupting SD cards
Random system apps stopping without me even using or opening them
Google Keyboard vanishing
Are there any stable ROMs I could try for the HLTE? Maybe one that has working NFC? I'm almost thinking of going back to stock *throws up in mouth* but I don't know what else to do with how many bugs there are and Lollipop is only getting worse with the issues.
I'm also trying to avoid Lollipop because everything is white, Note 3 is an AMOLED display, each pixel illuminates on it's own so white screens use WAY more battery life then black ones which was a feature of Temasek's CM11 that I liked, had the option in settings to make everything black like the good old days.
So guys? Really out on my luck here, not sure what the next step is, any fixes for these problems? Any other ROM's I could try? Would flashing a new recovery and reflashing CM11 M12 fix some of these issues? I'm using Xiaoli CWM v6.0.4.7(20140125). Would the fact that KNOX isn't tripped have something to do with this? I really don't understand why there aren't more posts for these issues which leads me to believe I'm one of the only ones experiencing them.
Any help or suggestions would be greatly appreciated
EDIT:
I forgot to mention that when recording audio or video, it's as if the mic gain is set on full so even the slightest sound is pure distortion, normal talking volume and it clips, I found an app that lets me choose between the mics and when I pic the external mic, it's all muffles as if something is covering it but my phone wasn't in a case while I was testing so I'm not sure what the deal is there but I can't record any decent audio with this and when I record in 4K using Cinema FV-5, all the videos turn out looking like Anaglyph 3D but all pink and green, it's really weird and I don't understand why, but 1080p at 60fps works fine.
I am on CM12 and luckily have had no issues at all. I came from KK 4.4.4 and still have the NB7 BL and modem. I tried one of the guys slim ROMs alpha builds but had issues (probably operator error) but I've tried Bluetooth, GPS, WiFi , LTE etc and everything is good. Not sure what to tell you. I do however always wipe internally and d/l all my apps again through WiFi. A bit cumbersome I know but it won't give me any residual data.
Sent from my SM-N900W8 using XDA Free mobile app
I don't know really what info I can give to help me figure this out but the last time I updated this phone to use it as a music player, I put AOSP 4.3 Jellybean [KANG] with Android 4.3.1 on it, (10.2-20131011-Albinoman887-glacier). It used to be fine with WiFi but now EVERY time I switch WiFi on the phone reboots. Any thoughts what might be happening or alternately, a ROM that works fine today?