Related
I had been using adb successfully, then it stopped working.
adb devices would only report no devices.
Finally I reviewed the runmefirst.bat from the rooting howto and noticed there is a check in there for
"%userprofile%\.android\adb_usb.ini"
This file needs to exist and it needs to contain the following
0x2080
Once I updated that ini file adb started working again.
chupper said:
I had been using adb successfully, then it stopped working.
adb devices would only report no devices.
Click to expand...
Click to collapse
In my case, I'm connecting my NT for the first time and the command adb devices doesn't show anything
chupper said:
Finally I reviewed the runmefirst.bat from the rooting howto and noticed there is a check in there for
Click to expand...
Click to collapse
where is this file "runmefirst.bat" my the extension i take it that it is a windows batch file, Since i'm running UbuntuPangolin which file should i refer to..
chupper said:
"%userprofile%\.android\adb_usb.ini"
Click to expand...
Click to collapse
Do i need to create this file manually, Coz i didn't find it Under my $HOME/ and is the file same for Linux(Ubuntu) too?
chupper said:
This file needs to exist and it needs to contain the following
0x2080
Click to expand...
Click to collapse
I understand that this number here, is vendor Id which i saw and followed the instructions from 51-android-rules(codeDOTgoogleDOTcom)
Can you let me know whats going wrong with my NT, even after following the instructions form the above link. Do i need to follow your instructions too? Please Help me....
I think you might have better luck if you posted your questions in the nook tablet forum. This is the forum for the nook color.
Sent from my NookColor using xda premium
Hi all,
I'm from Thailand
I met this method from other forum but I don't remember URL no need connect internet . I have downloaded zip file and replaced some file for working with LG G2.
this is guide for flash KDZ file via OFFLINE MODE .Your computer doesn't need connect internet like this LG G2 Stock Firmware (Go Back to Stock) method
Instruction
Do it first
1. Download file
- LGMOBILEAX.zip
- LG_KDZ_FW-Update_OfflineFix.zip
- Automatic_Offline_Procedure.zip new vbs modify by @abo_mara7 you can copy and replace old file in /LG_KDZ_FW-Update_OfflineFix Folder
He add this code in the first file
Set WshShell = WScript.CreateObject("WScript.Shell")
If WScript.Arguments.length = 0 Then
Set ObjShell = CreateObject("Shell.Application")
ObjShell.ShellExecute "wscript.exe", """" & _
WScript.ScriptFullName & """" &_
" RunAsAdministrator", , "runas", 1
End if
Click to expand...
Click to collapse
2. unzip
- LGMOBILEAX
- LG_KDZ_FW-Update_OfflineFix
3. install B2CAppSetup.exe in
LG_KDZ_FW-Update_OfflineFix\KDZ_FW_UPD_EN
4. go to C:\ProgramData\LGMOBILEAX
remove all files and folder
5. copy all files and folders from LGMOBILEAX that you unzip from step2 to C:\ProgramData\LGMOBILEAX
Method 1. work with vbs script
1. run Automatic Offline Procedure.vbs in \LG_KDZ_FW-Update_OfflineFix folder
2. now R&D test tools appear please select KDZ File
3. select Normal web upgrade test
4. Select Upgrade start
5. In Select Country & Langauage Please Select Country to Different Country (do not worry if does not has Langauage to select )
6. Process Flashing firmware start...Please waiting just moment.
7. for process 100% you is finishing flash return to stock firmware
Method 2. edit host file
thank @Hid3rs
1. Go to windows/system32/drivers/etc/ and open your hosts file! (open it with wordpad)
2 . Add this line at the end of the document:
127.0.0.1 csmg.lgmobile.com
3. Save hosts file
4. Install msxml (you can find it in the downloaded KDZ_FW_UPD_EN folder)
5. Start http in the shttps folder
6. Start Windows Enabler and turn it on (system tray!)
7. Start UpTestEX_mod2_marwin
8. Flash your .kdz as you normally would
-------------------------------------------------------------------
Method1.
Method2.
-------------------------------------------------------------------
Fixed Problem
1. fix Please update R&D Test tool LG G2
2. fix CSMG B2C Client TOOL.Select Tool - B2C Client Setup menu LG G2
3. fix You need connect pc to the internet LG G2
Whill this format /data. (can it be used for upgrading)?
yes,It is not format data.the result is like these method http://forum.xda-developers.com/showthread.php?t=2432476
Sent from my Nexus 7 using Tapatalk
LG G2 AT&T Bricked
Will this work for bricked AT&T Version?
these is the basic method for phone that can enter to download mode but no need connecting internet. for AT&T you should use TOT file for flashing.
Sent from my Nexus 7 using Tapatalk
update instruction.
When i try the .vbs file it says runtime error
Sent from my iPad using Tapatalk
zeema said:
When i try the .vbs file it says runtime error
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
what's error ? I will try to find solution
somboons said:
what's error ? I will try to find solution
Click to expand...
Click to collapse
this
zeema said:
this
Click to expand...
Click to collapse
right and select run as admin
Awesome. It looks like the same as LG G2 Stock Firmware (Go Back to Stock) but offline.
This should be sticky.
gypsy214 said:
Awesome. It looks like the same as LG G2 Stock Firmware (Go Back to Stock) but offline.
This should be sticky.
Click to expand...
Click to collapse
are you testing, I need someone to test and confirm this method work for now.
Actually i cant run this as an administrator i dont why??the choice is not available
Sent from my iPad using Tapatalk
zeema said:
Actually i cant run this as an administrator i dont why??the choice is not available
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
win 8 /7/xp ?
8
Sent from my iPad using Tapatalk
zeema said:
8
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
ok try to disable anti virus. I use nod32 and win8.1 but no need disable.
somboons said:
ok try to disable anti virus. I use nod32 and win8.1 but no need disable.
Click to expand...
Click to collapse
Actually am not enabling it
The chioice is not active in the tool bar above
Sent from my iPad using Tapatalk
somboons said:
win 8 /7/xp ?
Click to expand...
Click to collapse
I use Win7 and have same problem
How can I do?
ZSKOR said:
I use Win7 and have same problem
How can I do?
Click to expand...
Click to collapse
I am not master vb script :crying:
somboons said:
I am not master vb script :crying:
Click to expand...
Click to collapse
try install msxml.msi in LG_KDZ_FW-Update_OfflineFix\KDZ_FW_UPD_EN
report me back
I have done my best to make sure most of the LG G5s out there will work with LGUP.
DISCLAMER: first and foremost, I take NO responsibilities for the possibility of a bricked phone(none whatsoever). if you brick it, it's YOUR fault, not mine.
ALWAYS BACKUP YOUR DATA BEFORE YOU DO ANYTHING
now for the fun bit:
1. Download and extract the LGUP.zip file from here as it contains everything you'll need except the firmwares.
2. To install the drivers for the device, go to the Drivers folder located in LGUP, and select InstallUSB.exe for a 32-bit system, or InstallUSB64.exe for a 64-bit system.
3. Install LGUP_Lab_Frame_Ver_1_11 that is in the LGUP folder
4. Install either the G5x86.reg or the G5x64.reg depending on whether you have a 32 or 64 bit windows installed.
5. Put the "model" folder in the LG Electronics\LGUP folder which will be either in C:\Program Files or C:\Program Files (x86) depending on whether you have a 32 or 64 bit windows installed
6. Put phone in download mode ( Phone off, vol up while plugging in usb from PC), start LGUP
7. Make sure you see a com # and phone model and at the bottom where it says BIN, select it, at which point you should see 3 dot on the right, select it and choose the .tot or .kdz file listed for your device, then hit start and wait for the magic.
Devices supported:
A992
F700K
F700L
F700S
H820
H830
H831
H850
H850TR
H858
H860
H860N
H868
LS992
RS988
US992
VS987
If I have not listed your device, list the exact model name (i.e LGLS992) in the comments below and I will add it for download.
I give creds to autoprime for his good work. If I missed anyone, I am giving you credits and apologizing now for not mentioning you.
Sorry for a questions that may be dumb, but what is this Tool supposed to do?
Sent from my LG-H850 using Tapatalk
Just a program that lets you flash firmware files to the described phone models
gwolfu said:
Just a program that lets you flash firmware files to the described phone models
Click to expand...
Click to collapse
Any possibility of achieving root with this on locked bootloaders?
Sent from my SM-N900T using Tapatalk
ForgottenSolstace said:
Any possibility of achieving root with this on locked bootloaders?
Click to expand...
Click to collapse
From what I understand, as long as the stock firmware is published by LG or the carrier we can inject root.
Veliion said:
From what I understand, as long as the stock firmware is published by LG or the carrier we can inject root.
Click to expand...
Click to collapse
This only if the model support the fastboot oem unlock command.
Without an unlocked bootloader is not possible to obtain root on Marshmallow, the only way would be find an exploit.
Sent from my LG G5 using XDA Labs
A992 in OP is typo.. should be AS992 obviously.
New model you could add:
H820PR
H850K
Thank you!
can i install gapps using this tool？ i have a H868 chinese version, google services are not preinstalled .
Broken Link =(
This is exactly what I needed, but when I attempt to access it, the google drive link is 404'd
Any way we might could convince you to update the info? Thanks so much in advance for your time.
--AmorImpermissus
AmorImpermissus said:
This is exactly what I needed, but when I attempt to access it, the google drive link is 404'd
Any way we might could convince you to update the info? Thanks so much in advance for your time.
--AmorImpermissus
Click to expand...
Click to collapse
all in there
https://1drv.ms/f/s!Au9ppCUF0J7lgZpUFNW-cf8ot0EweA
gwolfu said:
all in there
https://1drv.ms/f/s!Au9ppCUF0J7lgZpUFNW-cf8ot0EweA
Click to expand...
Click to collapse
Thanks a bunch gwolfu. However, what I really need are the LG<model>_DLL.msi files. Specifically, I need it for the RS988. It was listed in the supported devices at the beginning, but can't find it =(
LGUP not working...
Please help.
LGUP not working
I tried all versions LGUP, drivers installed and still does not work.
I have a LG unit G5 Demo and Windows 7 x64.
Can you advise?
Thank you.
milennium said:
Please help.
LGUP not working
I tried all versions LGUP, drivers installed and still does not work.
I have a LG unit G5 Demo and Windows 7 x64.
Can you advise?
Thank you.
Click to expand...
Click to collapse
When you open "Settings" -> "General" tab -> "About phone" -> "Hardware info" what does it have for "Model number?"
Model number: LG-H850
OK looking at the screenshot, I'm wondering if somehow the install got messed up. If you go to:
c:\program files (x86)\LG Electronics\LGUP\Model
What are the contents?
Also, open powershell as an administrator (usually can just type "powershell" from an elevated command prompt) and run this command:
Get-ChildItem -recurse 'HKCU:\Software\LG Electronics\LGUP' | where-object { $_.Property -like "DLL*"}
Then copy/paste the results so I can see them =)
In regedit, go to:
HKCU:\software\LG Electronics\LGUP\Model
Contents is (screen A and B).
Question. They must be unlocked bootloader?
Because my LGG5 be unblocked (Demo Unit).
milennium said:
Contents is (screen A and B).
Question. They must be unlocked bootloader?
Because my LGG5 be unblocked (Demo Unit).
Click to expand...
Click to collapse
You should be able to use the LGUP tool regardless of whether or not you have an unlocked bootloader. You may not be able to flash every kind of *.tot file, but whether or not your phone's bootloader is unlocked will have nothing to do with that error you're getting.
What about the output of the powershell command:
Get-ChildItem -recurse 'HKCU:\Software\LG Electronics\LGUP' | where-object { $_.Property -like "DLL*"}
?
Here is the result Powershell command:
milennium said:
Here is the result Powershell command:
Click to expand...
Click to collapse
OK, so, do the following, and then try to run LGUP with the phone connected, and let's see if it works:
1. Create a blank notepad file
2. Save it as something like h850.reg to your desktop where you can find it easily.
3. With the file still open in notepad, copy/paste the info below info and then save it again.
4. Close the file, then double-click it from your desktop to import it.
I've also attached it as a *.txt file which you can just change the extension to *.reg if that's easier:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\LG Electronics\LGUP\Model\H850]
"MODEL_NAME"="H850"
"DLL_PATH"="C:\\Program Files (x86)\\LG Electronics\\LGUP\\Model\\H830\\LGUP_H830.dll"
[HKEY_CURRENT_USER\Software\LG Electronics\LGUP\Model\LGH850]
"DLL_PATH"="C:\\Program Files (x86)\\LG Electronics\\LGUP\\Model\\H830\\LGUP_H850.dll"
"MODEL_NAME"="LGH850"
[HKEY_CURRENT_USER\Software\LG Electronics\LGUP\Model2]
[HKEY_CURRENT_USER\Software\LG Electronics\LGUP\Model2\H850]
"DLL_PATH"="C:\\Program Files (x86)\\LG Electronics\\LGUP\\Model\\H830\\LGUP_H850.dll"
[HKEY_CURRENT_USER\Software\LG Electronics\LGUP\Model2\LGH850]
"DLL_PATH"="C:\\Program Files (x86)\\LG Electronics\\LGUP\\Model\\H830\\LGUP_H850.dll"
Steps:
Prepare and Notice
A. Backup data, it might be restore factory default setting especially using downgrade ROM version.
B. Unlock bootloader before apply manual update, the manual update package bypass auth through modified stock recovery.
C. After update successfully, device might be locked again.
D. Only tested China mate9 with MHA-AL00C00 and MHA-L29C636 ROM.
E. The manual update script use TWRP (Thanks to @Tkkg1994, @OldDroid)
Download Update ZIP
A. Get ROM update link through hwmt.ru. Click "filelist.xml".
B. Observe "update.zip" size, choose more than 1GB file size FULL OTA from previous step. Example MHA-L29C636B158 filelist Link, all three update files and path are in the filelist.xml content.
update.zip: Change URL last "filelist.xml" to "update.zip" download file.
update_data_public.zip: Change URL last "filelist.xml" to "public/update_data_full_public.zip" download file, and rename it to "update_data_public.zip"
update_all_hw.zip: Change URL last "filelist.xml" to "hw/spcseas/update_full_hw_spcseas.zip" download file, and rename it to "update_all_hw.zip"
C. Observe "update.zip" size, choose more than 1GB file size FULL OTA from previous step. Example MHA-AL00C00B167 filelist Link, , all three update files and path are in the filelist.xml content.
update.zip: Change URL last "filelist.xml" to "update.zip" download file.
update_data_public.zip: Change URL last "filelist.xml" to "public/update_data_full_public.zip" download file, and rename it to "update_data_public.zip"
update_all_hw.zip: Change URL last "filelist.xml" to "all/cn/update_full_all_cn.zip" download file, and rename it to "update_all_hw.zip"
Manual Update Package
A. Download Package (Direct uncompress Base, OS, and Model zips without file name as directory.)
(Rebrand thanks to @backb0ne5p1d0r)
(Oeminfo thanks to @5[Strogino])
Base: HWOTA_2017050101_Base.zip
OS:
Windows -> HWOTA_2017050101_Windows.zip
Linux -> HWOTA_2017050101_Linux.zip
Model:
Mate 9 -> HWOTA_2017050101_MHA.zip
Mate 9 Pro -> HWOTA_2017050101_LON.zip [Not Verified]
P10 -> HWOTA_2017050201_VTR.zip [Thanks to @crucky verify]
P10 Plus -> HWOTA_2017050401_VKY.zip
B. Run batch file "update.bat" or "update.sh" for same model update or rebrand with/without sdcard.
C. OEMInfo files are included for selection under rebrand.
D. Rebrand flash twice. Select "Rebrand" update type on the first time, and select "Same model update" on the second time. You may need to do factory default to get all app installed.
E. Follow message steps update should be done.
Hmm. Sound's good.
Are you hacking stock recovery to install everything what you want?
Did you test by self?
Main problem is to manually force update via stock recovery. But if you're using TWRP, so problem is to install full update. TWRP does not have support of special update commands.
Q: Are you hacking stock recovery to install everything what you want?
A: Only bypass auth and some checks. See Prepare and Notice B.
Q: Did you test by self?
A: Yes, see Prepare and Notice E.
mankindtw said:
Q: Are you hacking stock recovery to install everything what you want?
A: Yes, see Prepare and Notice B.
Q: Did you test by self?
A: Yes, see Prepare and Notice E.
Click to expand...
Click to collapse
Impressive!
This method can be used to rebrand too (in theory)
I will check soon.
EPIC!
Just used this to update into L29C636B180. It worked perfectly fine. THANK YOU!
---------- Post added at 10:49 AM ---------- Previous post was at 10:36 AM ----------
5[Strogino] said:
Impressive!
This method can be used to rebrand too (in theory)
I will check soon.
Click to expand...
Click to collapse
I believe so too. (That in theory this should work for rebranding.)
Looking at the batch file, I'd say you're supposed to restore oeminfo while the batch file is showing "D. Connect usb cable before next step.". if you want to rebrand.
Would love to try it. But I've just used this method to update into L29C636B180. Wouldn't want to reset all settings again. So please try it and let us know what happens if you rebrand!
and to the OP, Thank you again! I'm honestly so happy that we finally do not have to use "proprietary" services as someone puts it to update our phones hahah.
5[Strogino] said:
Impressive!
This method can be used to rebrand too (in theory)
I will check soon.
Click to expand...
Click to collapse
We are expecting good news.
@mankindtw, @backb0ne5p1d0r are superhero .)
Thank you so much.
Can you download the 3 files needed through FF and then follow your steps?
Sent from my MHA-L09 using XDA-Developers Legacy app
JATCHUHAN said:
Can you download the 3 files needed through FF and then follow your steps?
Sent from my MHA-L09 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yes. You can.
How to work with Mate 9 pro ? Thank you.
tom.android said:
How to work with Mate 9 pro ? Thank you.
Click to expand...
Click to collapse
Yeah wonder the same since Mate 9 Pro has no sd card storage.
Sent from my VIE-L29 using XDA Labs
It worked for me, im updated C636B180. Thanks.
Not too clear on the instructions. Could someone who has already updated with this method please give instructions as to how they updated their phone. Many thanks
Sent from my MHA-L09 using XDA-Developers Legacy app
5[Strogino] said:
Impressive!
This method can be used to rebrand too (in theory)
I will check soon.
Click to expand...
Click to collapse
I didn't test this method for rebrand.
Only test it after rebrand, because
when you flash oeminfo the phone,
it will be locked. Let's see what I can
do for rebrand.
Mostar088 said:
Yeah wonder the same since Mate 9 Pro has no sd card storage.
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
It has no sdcard, but it can use otg usb drive. I guess.
I don't have mate9 pro, so I can't test it.
mankindtw said:
It has no sdcard, but it can use otg usb drive. I guess.
I don't have mate9 pro, so I can't test it.
Click to expand...
Click to collapse
Tested with otg, does not find it when phone restart in upgrade mode only when phone is on normaly. Maby i do something wrong?
Sent from my VIE-L29 using XDA Labs
Hi, I'm glad to find this new update method, I tried whith L09 rebranded to C636 but I always get the same error "update does'nt found"or something similar.
Cheers!
Mostar088 said:
Tested with otg, does not find it when phone restart in upgrade mode only when phone is on normaly. Maby i do something wrong?
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
You need change bat-file and point path where packages located
Originally they are in /sdcard/HWOTA
Peppus said:
Hi, I'm glad to find this new update method, I tried whith L09 rebranded to C636 but I always get the same error "update does'nt found"or something similar.
Cheers!
Click to expand...
Click to collapse
Make sure you're putting the file on the external SDcard and not the internal one.
backb0ne5p1d0r said:
Make sure you're putting the file on the external SDcard and not the internal one.
Click to expand...
Click to collapse
Yes I did, the 3 zips in the HWOTA folder in the ext sd, but it seems that it doesn't find them. Thanks!
5[Strogino said:
;71962333]You need change bat-file and point path where packages located
Originally they are in /sdcard/HWOTA
Click to expand...
Click to collapse
No i mean it does not find the otg storage at all when it is in upgrade mode.
Only when it's powerd on normaly.
Sent from my VIE-L29 using XDA Labs
Hi!
i create a software to fix Balong issue after flashing a ROM.
Download the zip, extract the folder then only need to follow the steps in software!
Check the pictures bellow!
If fails check if cust image is properly installed before execute the software again.
Tell me if worked for you!
.
Thanks.
I've installed TWRP 3.1.1-0, but when I use your software it says "error: no devices/emulators found", even if I put the correct cust path
persona78 said:
Hi!
i create a software to fix Balong issue after flashing a ROM.
Download the zip, extract the folder then only need to follow the steps in software!
Check the pictures bellow!
If fails check if cust image is properly installed before execute the software again.
Tell me if worked for you!
.
Click to expand...
Click to collapse
Hi
After an update (official!) I re-encountered BALONG. After using your marvelous tool, it worked again, but there's no need to reset device (as written on CMD).
In addition, for the ones that get the error "no device attached" or something similar, you've only to reboot to TWRP, connect the phone to Windows and press Win+X, click on "device manager", look for "android device" or something similar. Right click on it and select "update driver", click the second option and than select that you already have the CD driver. You'll see a list: select "ADB composite device" and than finish: you've done!
Ah, I was about to forget: thank you!
Regards,
F
fixed
Hi.
Thanks for fast answer. I could fix the problem.
I downloaded the EMUI 3.1 as Magyar Telekom firmware from an arabic server cause ru huawei servers doesnt work lol. So I downloaded it I extracted boot, recovery, system, cust img files from UPDATE.APP with Huawei AppImage Extractor application. I flashed these with fastboot (Not TWRP, not huawei recovery). Fastboot from computer. Ok. But at the moment SIM does not work. I upgraded the system from Huawei update from settings (not recovery, system settings). After update the ROM and SIM is work perfectly.
Btw thanks your answer, topices too. This is a big help from you.
Have a nice day, Balázs.
How Can i use it for Meanaf Localization ????
How Can i use it for Meanaf Localization ????
@persona78
can you provide me Tool To fix Balong
Countryakistan
Mobile:ALE-L21
ROM:C185
Hello thanks for creating such tool
I've tried to use it but i get this error after TWRP boot :
mount: No such file or directory
mkdir: '/cust/hw': No such file or directory
ln: cannot create symbolic link from '/cust/hw/eu' to '/cust/hw/meafnaf': No such file or directory
Is there any solution for this?
-Mouhammad said:
Hello thanks for creating such tool
I've tried to use it but i get this error after TWRP boot :
mount: No such file or directory
mkdir: '/cust/hw': No such file or directory
ln: cannot create symbolic link from '/cust/hw/eu' to '/cust/hw/meafnaf': No such file or directory
Is there any solution for this?
Click to expand...
Click to collapse
Which Cust Path Do you Want?
hw/meafnaf?
MohmmadUzairKhan said:
Which Cust Path Do you Want?
hw/meafnaf?
Click to expand...
Click to collapse
The program detected this path : cust/hw/meanfaf
Is this what you mean?
-Mouhammad said:
The program detected this path : cust/hw/meanfaf
Is this what you mean?
Click to expand...
Click to collapse
What Do You Want?
hw/eu?
MohmmadUzairKhan said:
What Do You Want?
hw/eu?
Click to expand...
Click to collapse
Do you know what cuases this error?
Thank you its working excellent . And wipe is not needed. Tnx again ?
pls say me
how can i fix it with opened bootloader? must i flash cast?
Doesn't work. Did everything by the instructions. Twice.