Hi Folks,
i have one little problem with Xdabbeb's camera mod. I'm not even sure if there's a fix for it or not, but i figured asking doesn't hurt.
So, i flashed CloudyStock and Xdabbeb's camera and have this weird problem that the camera only starts in landscape mode and it does not rotate any other way. i can shake and tilt the phone whichever way i want it just stays in landscape.
camera mod works fine with LG Stock but i really like cloudyfas rom so i thought maybe one of you competent guys have a solution or an idea where to look for one?
My Phone: LG D802 (International), TWRP 2.6.3.3, CloudyStock 1.0, Xdabbeb's Camera 1.5 (1.4 tested, same problem).
Thanks for any help!
Edit: Whelp, guess i fixed it myself. For anyone else interested: Solution seems to be fixing permissions with TWRP.
Related
[Case history]
I've been using CM11 for quite a while and one day I messed up. I installed a Kernel that wasn't compatible with CM11 and I couldn't boot the phone. So I used ADB to push a CM11 ROM and flashed it using TWRP and it was fine...until...
I found that all my sensors were not working....well not all, but 'all'. Please let me explain.
I noticed that Rotation doesn't work anymore; I noticed that Auto Brightness would not work anymore; I also notice Accelometer wouldn't work.
So I downloaded the app 'Phone Tester', and I went to the 'Sensor' section and there was nothing detected there! No sensors at all.
However, I have this cover for my phone and when I cover the phone the screen will go out --> I assumed that means the proximity sensor works? I also noticed that the screen will blackout when I am on a phone call.
[My question]
I searched a bit and had two speculations.
1.) Baseband/Modem problem? --> I tried flashing the KK Modem for D802 and it didn't fix the problem
2.) Kernel problem? --> I think this is quite possible...but didn't flashing the ROM = flashing in a Kernel?
Any help is appreciated!
If I were you I would flash it back to stock and see if they work then
sent from my T-Mobile LG-VS980
herman925 said:
[Case history]
I've been using CM11 for quite a while and one day I messed up. I installed a Kernel that wasn't compatible with CM11 and I couldn't boot the phone. So I used ADB to push a CM11 ROM and flashed it using TWRP and it was fine...until...
I found that all my sensors were not working....well not all, but 'all'. Please let me explain.
I noticed that Rotation doesn't work anymore; I noticed that Auto Brightness would not work anymore; I also notice Accelometer wouldn't work.
So I downloaded the app 'Phone Tester', and I went to the 'Sensor' section and there was nothing detected there! No sensors at all.
However, I have this cover for my phone and when I cover the phone the screen will go out --> I assumed that means the proximity sensor works? I also noticed that the screen will blackout when I am on a phone call.
[My question]
I searched a bit and had two speculations.
1.) Baseband/Modem problem? --> I tried flashing the KK Modem for D802 and it didn't fix the problem
2.) Kernel problem? --> I think this is quite possible...but didn't flashing the ROM = flashing in a Kernel?
Any help is appreciated!
Click to expand...
Click to collapse
it is a baseband issue, as you know cm has not incorporated the lg kk changes which means that the kk baseband would not work you have to flash the d802 jb baseband and you will get sensors working again
XxZombiePikachu said:
it is a baseband issue, as you know cm has not incorporated the lg kk changes which means that the kk baseband would not work you have to flash the d802 jb baseband and you will get sensors working again
Click to expand...
Click to collapse
Thanks! I flashed the JB Baseband and it actually worked!
Hi there,
I recently rooted my Rogers LG G2 d803 and everything has been working fine except the camera. Whenever I open it (including other camera apps), it just says "Cannot connect to camera" giving me no choice by to quit it. I have googled it, but only found threads regarding different phones, so I don't want to take any actions without knowing if it will work for my phone.
Can someone please give me a suggestion on how to fix this problem? I understand I should flash a kernel, based on other threads, but I don't know which one and how to go about doing it safely.
Thank you!
Oh, and it's running 4.4.2 JB and Kernel is 3.4.0.
I've been trying to get this camera working on my G3 rom but I was unsuccessful. Installing the camera app from OnePlus does not show the Clear Image setting. I'm guessing, as others have said, there are some libs that may be required for it. Do you guys have any clue how to get this working?
Hello,
I had an Lg G2 D802 which I rooted and installed Cloudy G2.2. Was working perfect with Cloudy but also with stock. I sell it because the frame was cracked and I bought another D802 from a coleague. With stock rom reseted with factory reset was not working as good as the first one, sometimes when I'm scrolling it the phone take as a click and enter in link/page/ app which is there. Also I observed that enters in apps a little bit slower and through menus is slower. I installed Cloudy G2.2 on this one also, was working a little bit better but not as the first phone. 4 days ago I installed CM13
and wowwww....is working perfect with no lag. Also before installing CM13 I flashed bootstack-d802-CAF-signed .
My question here is why this drastic change? because of bootstack? Because of the ROM ? On the first phone was working great with both ROMs.... I want to revert to Cloudy (at least until the CM13 is more stable and with more things implemented) but I also want the phone to work as now.
So....what could be the problem for the lag ???
Have a great day!
Hello I updated my g6 to Android pie and now the camera app will not open. It just crashes. I did a hard reset but still no go. It also won't let me use the camera in any apps or messages. I have tried to download other camera apps but no go either. Any help would be awesome. Thanks!
can you turn flash on ? what about vibrator (a commun issue with G6) ?
i'm having kind of the same problem, the camera doesn't work on Oreo stock but on other costum roms. the vibrator in the other hand seems to be broken, it might causes issues on stock roms, besides the camera flash and other sinsors are down :/
I also have problem with camera after coming back to stock pie. I'll try to flash custom ROM again to check if camera software is broken completely and the thing that installing custom ROMs destroys stock camera software or something...