Hello
can anyone give me a link to a cyonogenmod rom port in which the network is working
i tried a rom but it always shows network as no service..........
all cm7 roms work fully with network
make sure you are using a cm kernel - ie percys or black reactor cm
make sure you have imei
dial *#06#
you may have to change your stock rom firmware baseband by flashing a different stock rom via odin or flash the ril fix from the hyperion thread if you have no imei
marcussmith2626 said:
all cm7 roms work fully with network
make sure you are using a cm kernel - ie percys or black reactor cm
make sure you have imei
dial *#06#
you may have to change your stock rom firmware baseband by flashing a different stock rom via odin or flash the ril fix from the hyperion thread if you have no imei
Click to expand...
Click to collapse
hey
i flashed a cm rom which had whitexp kernel along with it
but the network was not working
my baseband was u think ddlk1 ao ddmd1
abhishekr700 said:
hey
i flashed a cm rom which had whitexp kernel along with it
but the network was not working
my baseband was u think ddlk1 ao ddmd1
Click to expand...
Click to collapse
are you sure you are using cm7 roms and not cm9 rom which nothing work on it other then it boots
cm7 roms based on percys rc1 have full network working
you need to use percys kernel or black reactor cm kernel
abhishekr700 said:
hey
i flashed a cm rom which had whitexp kernel along with it
but the network was not working
my baseband was u think ddlk1 ao ddmd1
Click to expand...
Click to collapse
Try Hell's Fusion #50
It is a good kernel and supports ext4 and all varients of CM7 as said by its developer
InfinityShooter said:
-Compatible with all cm7 variants!
Click to expand...
Click to collapse
marcussmith2626 said:
are you sure you are using cm7 roms and not cm9 rom which nothing work on it other then it boots
cm7 roms based on percys rc1 have full network working
you need to use percys kernel or black reactor cm kernel
Click to expand...
Click to collapse
Oh sorry I was using cm9 rom...now i'll download cm7 rom
Can I get the links here to the threads
Sent from my GT-S5360 using Tapatalk 2
abhishekr700 said:
Oh sorry I was using cm9 rom...now i'll download cm7 rom
Can I get the links here to the threads
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
all the roms are in the dev section - choose which one meets your needs - cm roms are marked cm in the thread title
percys rc1 which most other cm roms are based on can be found
http://forum.xda-developers.com/showpost.php?p=43800547&postcount=2
abhishekr700 said:
Oh sorry I was using cm9 rom...now i'll download cm7 rom
Can I get the links here to the threads
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Percy CM Kernel
Blackreactor CM Kernel DOWNLOAD CM VERSION
Hell's Fusion Kernel
Press Thanks if helped.
..
hnkotnis said:
Percy CM Kernel
Blackreactor CM Kernel DOWNLOAD CM VERSION
Hell's Fusion Kernel
Press Thanks if helped.
Click to expand...
Click to collapse
dont use hells fusion kernel on cm - although it will boot it does not contain the moduals for wifi and bluetooth as its a stock rom kernel
Sanjeevjoshi said:
Guys if some could help me in changing my audio drivers to beats audio drivers... I tried the n!k zip didn't help...bricked my phone. And then tried beats app installer still bricked my phone help..
Sent from my Q800
Click to expand...
Click to collapse
Use my sgy toolkit to install beats
Sent from my GT-S5360 Gadget of Mass Destruction using xda-app
Using CWM........Busybox Commands........No I use my hands
Sanjeevjoshi said:
Guys if some could help me in changing my audio drivers to beats audio drivers... I tried the n!k zip didn't help...bricked my phone. And then tried beats app installer still bricked my phone help..
Sent from my Q800
Click to expand...
Click to collapse
hnkotnis said:
Use my sgy toolkit to install beats
Sent from my GT-S5360 Gadget of Mass Destruction using xda-app
Using CWM........Busybox Commands........No I use my hands
Click to expand...
Click to collapse
Yes use his toolkit its really helpful and the best I have ever seen
There are all options available
U will find yours in miscellaneous tab
Sent from my GT-S5360 using Tapatalk 2
Thanks for the info again will try soon....
---------- Post added at 09:25 PM ---------- Previous post was at 09:19 PM ----------
Thanks for confirming. Will try it soon..
..
Sanjeevjoshi said:
Further more could I ask if there is cm for xolo q800? Or near to it rom
Sent from my Q800
Click to expand...
Click to collapse
ask this ques in its respective forum please.
..
Sanjeevjoshi said:
K... Sorry just wanted to know if some could help.. New here
Sent from my Q800
Click to expand...
Click to collapse
no matter
xda will never ignore new members
have a happy time here............
Related
I installed the jellyblast v3 rom which includes kuro kernel into my gts5360... after i manually flashed the 2nd OTA update using clockwormod the status bar was gne.. also couldnt see caller screen... so i instaleed my stock rom which was backed up using CWM... bt the kernel is still kuro kernel... nw i wnt to install jellyblast v3 rom again... bt should i install it directly using CWM on kuro kernel???
coz the description in the thread says it requires stock kernel... also if can someone tell me hw to flash merruk kernel after flashing jellyblast...???
sumic17 said:
I installed the jellyblast v3 rom which includes kuro kernel into my gts5360... after i manually flashed the 2nd OTA update using clockwormod the status bar was gne.. also couldnt see caller screen... so i instaleed my stock rom which was backed up using CWM... bt the kernel is still kuro kernel... nw i wnt to install jellyblast v3 rom again... bt should i install it directly using CWM on kuro kernel???
coz the description in the thread says it requires stock kernel... also if can someone tell me hw to flash merruk kernel after flashing jellyblast...???
Click to expand...
Click to collapse
try flashing jb3 widout flashing stock kernal...if it does'nt works try it with stock kernel....and abit merruks....go to the thread...u will find many post on how to flash merruks kernel
Sent from my GT-S5360 using xda app-developers app
anmolsharma1293 said:
try flashing jb3 widout flashing stock kernal...if it does'nt works try it with stock kernel....and abit merruks....go to the thread...u will find many post on how to flash merruks kernel
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
dude d prob is that i hv nly 1 phn... nd if its gne.. den i wud b helpless... it wud b kind enuf if u tell me a cnfrmed method...
sumic17 said:
dude d prob is that i hv nly 1 phn... nd if its gne.. den i wud b helpless... it wud b kind enuf if u tell me a cnfrmed method...
Click to expand...
Click to collapse
I think as u r already having kuros kernel than u dont have 2 go back 2 stock kernel....just flash jb v3.0.2
Or u can go to safe way jus by flashing stock kernel and than jb v3....
Sent from my GT-S5360 using xda app-developers app
Kuro kernel = stock + battery saver + awesomw
Globally recognised and certified NOOB
anmolsharma1293 said:
I think as u r already having kuros kernel than u dont have 2 go back 2 stock kernel....just flash jb v3.0.2
Or u can go to safe way jus by flashing stock kernel and than jb v3....
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
kk.. vil c...
Finally flashed jbv3 thanks anmol sharma
Sent from my GT-S5360 using xda app-developers app
Can i get bck my stock kernel by flashing stock rom via odin from sir doky's thread????
Sent from my GT-S5360 using xda app-developers app
sumic17 said:
Can i get bck my stock kernel by flashing stock rom via odin from sir doky's thread????
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
yes u can get back stock kernel by flashing via odin
or u can jst flash stock "boot.img" via kernel flasher to get back ur stock kernel
10% battery or lower problem
hi.. can i ask what can i do with my problem on jbv3.. when my battery is 10% or lower, the screen is just black.. can someone help me..
Jellyblast is an awesome custom rom!! pls help thanks
yabs0423 said:
hi.. can i ask what can i do with my problem on jbv3.. when my battery is 10% or lower, the screen is just black.. can someone help me..
Jellyblast is an awesome custom rom!! pls help thanks
Click to expand...
Click to collapse
Is your screen totally black or a little bit luminous? Because it is normal that the screen darkens when the battery is low for save it.
Can i install JELLYBLAST V3 on my samsung galaxy y GT-S5360L ?
i have flash ota3, but at cpu spy i cannot see the state. i use merruk kernel 2.5 #206
one more my RAM is reduce to 249MB.
how it happen, anyone can help me?
Not really... My jelly blast is MOST awesome with repencis kernel. It was good with kuro, awesome with repencis. Repencis works without lag even in max 312ghz, min 156 ghz. Really good.
All your cheese belongs to ME!
Rcain said:
Not really... My jelly blast is MOST awesome with repencis kernel. It was good with kuro, awesome with repencis. Repencis works without lag even in max 312ghz, min 156 ghz. Really good.
All your cheese belongs to ME!
Click to expand...
Click to collapse
can i change kernel from merruk to repencis? how bout backup can it restore in repencis kernel?
Don't use merruk kernel 2.5, if you really want merruk kernel, use merruk 2.0 elite version. Even after bacem tweaks the over clocking doesn't really work. It just wouldn't stay up at 1.24 ghz. But the best kernel for Jb v3 is still repencis
All your cheese belongs to ME!
Rcain said:
Don't use merruk kernel 2.5, if you really want merruk kernel, use merruk 2.0 elite version. Even after bacem tweaks the over clocking doesn't really work. It just wouldn't stay up at 1.24 ghz. But the best kernel for Jb v3 is still repencis
All your cheese belongs to ME!
Click to expand...
Click to collapse
thanks a lot, can you give me link to install repencis kernel?
http://forum.xda-developers.com/showthread.php?t=1945621
[Update] [KERNEL] Repencis Kernel [TOOL] ext4 Converter
The installation is a little bit hard though. Remember to back up through cwm before flashing.
All your cheese belongs to ME!
Rcain said:
Not really... My jelly blast is MOST awesome with repencis kernel. It was good with kuro, awesome with repencis. Repencis works without lag even in max 312ghz, min 156 ghz. Really good.
All your cheese belongs to ME!
Click to expand...
Click to collapse
I agree with u man.. im using jellyblast + repencis = awesome!!
Rcain said:
http://forum.xda-developers.com/showthread.php?t=1945621
[Update] [KERNEL] Repencis Kernel [TOOL] ext4 Converter
The installation is a little bit hard though. Remember to back up through cwm before flashing.
All your cheese belongs to ME!
Click to expand...
Click to collapse
:good: ive install repencis kernel, all good, but youtube fc hmmm
Sent from my GT-S5360 using xda premium
Ah...
Thats easy...
Just go to cwm and flash it...
I just did it yesterday...
Got to stock recovery (Three buttons Combination)
Flash CWM from"apply update from sd card"
Select the Savies kernel aroma zip, and follow the instructions there
landlord28 said:
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
hey if u r unable to install savie kernel on stock 1 den try installing kuro kernel first den flash savie kernel..
i installed kuro kernel first n den flashed savie kernel ..
it worked for me..
i think it will also work directly on stock kernel :highfive:
you actually dont need to create threads like this...
the savie kernel thread has instructions...
better read it....
Sent from my Android I100.001 Overclocked at 99999.999999 UXHz with Nvidia Tegra XTREME with 999.999 UXB of RAM 10 UXB of Internal Storage..UXXFQ Display...
with 500 cores.....
which baseband you used ???
coz i bricked my phone when i flashed it !!
menewtoroot said:
Ah...
Thats easy...
Just go to cwm and flash it...
I just did it yesterday...
Click to expand...
Click to collapse
what the vision are you want to flash...#73, #1 or # 2
hi,which rom save battery a lot and have no any bug?
Can suggest to me?xP
thx
Hi,
I use now Evo-x2.1, its minimalistic, and use a custom kernel, like Whitexp kernel, and put on powersaving governor 156mhz - 832mhz.
Repencis 3.5 advanced rom and once installed flash the new repencis kernel - fully working no bugs
marcussmith2626 said:
Repencis 3.5 advanced rom and once installed flash the new repencis kernel - fully working no bugs
Click to expand...
Click to collapse
i want to try to flash repencisv3.5 rom , but i already in stock rom without any kernel,i failed to install it, it says installtion abordted. make me cry ><
so i try to extract the file in my computer,and the i found it the file had break,i download it from the official repencis post,try 4-5 times already,also fail.
Any solution? =]
stock odex rom
Hyperion Rom Gold Edition .. best ROm!
but hyperion WIFI problem can be fix?
Sent from my GT-S5360 using xda app-developers app
Use jellyblady v3 the best rom for sgy ever and it has a custom kernel (kuro kernel) it saves battery and has 3g tweaks
sent from my GT-S5360 galaxy y running on jellyblast 3.0.3(jellybean) using XDA Premium
waikit2012 said:
but hyperion WIFI problem can be fix?
Click to expand...
Click to collapse
Yes. it can be fix. Go to HYPERION 7 GM's Thread scroll down and find the troubleshooting guide for wifi and network fix.
waikit2012 said:
i want to try to flash repencisv3.5 rom , but i already in stock rom without any kernel,i failed to install it, it says installtion abordted. make me cry ><
so i try to extract the file in my computer,and the i found it the file had break,i download it from the official repencis post,try 4-5 times already,also fail.
Any solution? =]
Click to expand...
Click to collapse
i encountered your problem and found out my error :
-must be ROOT
-PARTITION SD CARD (optional)
-install ROM's via CWM
-download again the .zip rom
Questions :
1. Did u use CWM ?
You should PM the CONTRIBUTORS/THEMERS/ETC.. about your problem.
m.h.mahadi said:
stock odex rom
Click to expand...
Click to collapse
I should prefer STOCK DEODEXED ROM -more customizable
then if you want to make FREE SPACE IN INTERNAL you should download ROMODEXER
just flash via CWM
Press thanks if i help a little
Stock with a kernel stuffed with governors and schedulers.
Sent from my GT-S5360 using xda premium
Hey Guys Pls Help Me
I Have used ManY Roms
Creed ,Cod,USSR8 ,etc
Now I'm On Jelly Blast V3 awesome
Rom ..
But When I Flash the Merruk Kernel
Delux Or
Any other kernel
My phone Does not Boots
Can u Please help me guysz:::
Cool.yash17 said:
Hey Guys Pls Help Me
I Have used ManY Roms
Creed ,Cod,USSR8 ,etc
Now I'm On Jelly Blast V3 awesome
Rom ..
But When I Flash the Merruk Kernel
Delux Or
Any other kernel
My phone Does not Boots
Can u Please help me guysz:::
Click to expand...
Click to collapse
Which kernel did u flash and how? plz tell me the detail. By the way Merruk kernel is very unstable. I recomment u not to use it.
Some roms do not function with kernels other than those included in the rom..
Also you must follow proper instructions to flash kernel
one thing more... After flashing merruks kernel you have yo flash ext4 convertor
it will convert your /data /system and /cache tp ext4 which is not supported by some kernels and rom dont boot
Thank You Guys For Replying A Noob
Heys
Guys
Thanks Lot both Of You
Can U Recommend a kernel For me
I'm Using Jelly last v3
Cool.yash17 said:
Heys
Guys
Thanks Lot both Of You
Can U Recommend a kernel For me
I'm Using Jelly last v3
Click to expand...
Click to collapse
I recomment u to use savie or kuro best for battery saving as well as good performance . search for it in the forum.
Dont say merruk kernel is very unstable....
Say that u dont know how to flash it properly and use it...
Sent from my GT-S5360 using xda app-developers app
anmolsharma1293 said:
Dont say merruk kernel is very unstable....
Say that u dont know how to flash it properly and use it...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
I don`t think i have said any wrong thing that u are trying to insult me saying
anmolsharma1293 said:
Dont say merruk kernel is very unstable....
Say that u dont know how to flash it properly and use it...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
That was really rude bro.
I mean to say it`s for advanced users. Becoz to install it successfully without any errors is difficult for one who is new to such stuffs.But one can easily flash
other kernels like savie,kuro,hells fusion etc following simple steps.
By the way for ur kind information i have once successfully installed the Merruk Kernel but changed becoz it was power hungry
samir basnet said:
I don`t think i have said any wrong thing that u are trying to insult me saying
That was really rude bro.
I mean to say it`s for advanced users. Becoz to install it successfully without any errors is difficult for one who is new to such stuffs.But one can easily flash
other kernels like savie,kuro,hells fusion etc following simple steps.
By the way for ur kind information i have once successfully installed the Merruk Kernel but changed becoz it was power hungry
Click to expand...
Click to collapse
yep merruk is for advance users so this saturday i am going to flash it tooo...lolz
Cool.yash17 said:
Heys
Guys
Thanks Lot both Of You
Can U Recommend a kernel For me
I'm Using Jelly last v3
Click to expand...
Click to collapse
When i used JBv3 i was flashed White 1.2.0 kernel nd its working fine but i'v got a different problem with JB
Hi all, as topic stated, my SGY after flashing no matter what kind of kernel (merruk, hell kernel) on stock ROM, my IMEI went missing. Is there any way to retrieve back? Or I should stay on stock kernel? (I DON'T want to flash any other ROM at the moment)
What kernel?
I tried merruk's kernel final 2.5 and Hells Fusion kernel. All my IMEI missing after flash. I am using stock SGY's ROM.
Sent from my GT-I9082
My idea is flash the latest firmware for your country.
CrazeXDA said:
My idea is flash the latest firmware for your country.
Click to expand...
Click to collapse
Stock kernel don't have CPU frequency control features. I am locked at 832MHz
soralz said:
Stock kernel don't have CPU frequency control features. I am locked at 832MHz
Click to expand...
Click to collapse
You really don't get what i meant. Haha. What i mean is this:
*Flash latest stock firmware for your country.
*Then flash a custom kernel.
It worked for me. Good luck.
Sent from my GT-S5360 using xda premium
CrazeXDA said:
You really don't get what i meant. Haha. What i mean is this:
*Flash latest stock firmware for your country.
*Then flash a custom kernel.
It worked for me. Good luck.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
That's what I did. Does not work Blank IMEI.
soralz said:
That's what I did. Does not work Blank IMEI.
Click to expand...
Click to collapse
Try using another sim card.
Sent from my GT-S5360 using xda premium
CrazeXDA said:
Try using another sim card.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
IMEI has nothing to do with SIM card. Whether you insert it or no. Already tried.
same problem here. IMEI missing. but it is still there. coz I checked with galaxy tools trying to get it back but then I clicked info, IMEI was there. but it is missing on the settings page. IMEI "UNKNOWN" and pressing *#06# says Imei=blank
soralz said:
Hi all, as topic stated, my SGY after flashing no matter what kind of kernel (merruk, hell kernel) on stock ROM, my IMEI went missing. Is there any way to retrieve back? Or I should stay on stock kernel? (I DON'T want to flash any other ROM at the moment)
Click to expand...
Click to collapse
what baseband are you using? if its ddmd1 then it does not support custom kernels because samsung messed up with the ramdisk. only kernel that supports ddmd1 is @Nitzz kernel
SaketJoshi said:
what baseband are you using? if its ddmd1 then it does not support custom kernels because samsung messed up with the ramdisk. only kernel that supports ddmd1 is @Nitzz kernel
Click to expand...
Click to collapse
guyz i have made some changes in anothr kernel..
i hav changed the randisk of savie kernel also but i cant share it on xda..
since no source is given by savie and his main thread is also lockd..
so cant share new kernel wid u..
new savie #1 & #2 are edited by me and also support init.d wid ext4 support..
contact me on fb i ll giv u the links
jepyi said:
same problem here. IMEI missing. but it is still there. coz I checked with galaxy tools trying to get it back but then I clicked info, IMEI was there. but it is missing on the settings page. IMEI "UNKNOWN" and pressing *#06# says Imei=blank
Click to expand...
Click to collapse
same problem with u bro.. also was check with galaxy tools Imei number not missing, but blank when check with *#06#. can any one help us..
soralz said:
Hi all, as topic stated, my SGY after flashing no matter what kind of kernel (merruk, hell kernel) on stock ROM, my IMEI went missing. Is there any way to retrieve back? Or I should stay on stock kernel? (I DON'T want to flash any other ROM at the moment)
Click to expand...
Click to collapse
Whats your base rom n kernel...Try Kuro kernel (final)....i think it will work coz i've the same issue but after flashing kuro its sloved.
Used DXLF2 version of firmware, or earlier. And will be solved.