Database Users

[ACS][How to] Update to EL30 Android 2.3.6, ROOT and Review

Just made a video for everyone on updating to stock EL30. I'll be doing more videos on El30 for sure.
How to Manually Update the Samsung Epic 4G to Stock EL30 Gingerbread:
http://www.youtube.com/watch?v=B3bccIXQSrU
Review of EL30 (There are some changes):
http://www.youtube.com/watch?v=30cW2WhL0KA
HOW TO ROOT ON EL30:
http://www.youtube.com/watch?v=kwFRzzIqouE

OP updated

Super fast with the vids as always! Thanks!
Oh...and first!

Has anyone experienced the boot loop issue like the last manual update to 22? I had to wipe my phone to fix...
Not sent from my Sprint Galaxy Nexus

If you did did the GPS Fix (assuming you're on stock BML EI22), then you will need to replace the system/vendor/bin/gpsd file or else you will get an Error Status 7 when you try to do the update. You can extract the file from the EI22.zip (If someone can post the file and host it, even better).
I haven't tested the GPS after updating so I don't know if the new gpsd file fixes anything or reverts things back to what they were (ie locking on only 3 or 4 sats). If it has reverted it back, then you will probably have to re-run the GPS Fix again.

i got an error "verifying the script(?)" i forgot the complete error message when i tried to install it from stock ei22 and stock recovery.
Do you think it has to do with the fact that I downloaded within the phone's webbrowser, and renamed it in ES explorer within the phone?
I have trouble mounting my phone to my computer, so i either have to download files to my phone directly from within its own webbrowser, or take the sd card out and mount that seperatly.

@qbking77: you don't need to rename the update file to update.zip since the GB roms the stock reccovery allows you to choose what zip to use.
For me I copied both updates to my card as update.zip, EI22 and update-EL30.zip then I:
1- ODIN'd to EC05
2- shutdown
3- 3 finger salute
4- flashed update.zip (EI22)
5- shutdown
6- 3 finger salute
7- flashed update-EL30.zip
After that I:
A- copied the su.zip that removes the reinstall of stock recovery,
B- ODIN'd cwm 3 but unchecked reboot.
C- pulled battery
D- 3 finger salute
E- flashed the aboved mentioned su.zip
F- flashed cwm5
G- rebooted
That left me with a stock kernel with root and custom recovery. Made a NANDROID and have been tinkering with it.
Right now I'm tring to get CRT-OFF to work.
Sent from my SPH-D700 using Tapatalk

futureprospect said:
i got an error "verifying the script(?)" i forgot the complete error message when i tried to install it from stock ei22 and stock recovery.
Do you think it has to do with the fact that I downloaded within the phone's webbrowser, and renamed it in ES explorer within the phone?
I have trouble mounting my phone to my computer, so i either have to download files to my phone directly from within its own webbrowser, or take the sd card out and mount that seperatly.
Click to expand...
Click to collapse
I recomend to mount the card seperatly or use airdroid from the market to transfer files from your comp to phone over wifi
Sent from my SPH-D700 using Tapatalk

futureprospect said:
i got an error "verifying the script(?)" i forgot the complete error message when i tried to install it from stock ei22 and stock recovery.
Do you think it has to do with the fact that I downloaded within the phone's webbrowser, and renamed it in ES explorer within the phone?
I have trouble mounting my phone to my computer, so i either have to download files to my phone directly from within its own webbrowser, or take the sd card out and mount that seperatly.
Click to expand...
Click to collapse
nevermind. I dled a curropt file. After redownloading it worked.
Thanks qb for the review and install. Btw ei22 had the loop-scrolling home screens too, but no biggie.

thanks for the post qbking. So seems like no real reason to update if you arnt using a stock rom?

Updated OP... Use the SAME method to root as EI22!

qbking77 said:
Updated OP... Use the SAME method to root as EI22!
Click to expand...
Click to collapse
Plus Toadlife has a prerooted kernel for this over in development which should help.
Sent from my SPH-D700 using XDA App

Do I need to unroot before I update?

Falhawk said:
Do I need to unroot before I update?
Click to expand...
Click to collapse
That is what the procedure does, yes.

Toadlife has both ODIN + Heimdall stock packages pre-loaded w/ kernel............these'll be especially useful to us folk that need to ODIN back to stock from MTD set-ups........then back up the chain to EL30 firmware.
Sent from my SPH-D700 using xda premium

Ok I am rooted but I have the stock EI22 Gingerbread, Firmware 2.3.5 and Kernel 2.6.35.7. I recieved my update today. Forgive me I am a noob. Do I still have to unroot this to complete stock or simply update my phone over the air?
I have the ACS Recovery V1.0.0.5 CWM4 based.

fatstrat67 said:
Ok I am rooted but I have the stock EI22 Gingerbread, Firmware 2.3.5 and Kernel 2.6.35.7. I recieved my update today. Forgive me I am a noob. Do I still have to unroot this to complete stock or simply update my phone over the air?
I have the ACS Recovery V1.0.0.5 CWM4 based.
Click to expand...
Click to collapse
No update from Sprint will ever work on a rooted phone.
Sent from my SPH-D700 using XDA App

brooksyx said:
thanks for the post qbking. So seems like no real reason to update if you arnt using a stock rom?
Click to expand...
Click to collapse
Even if you're using a stock rom I don't see much benefit in upgrading. GPS was still broken for me and they changed/removed things I liked in the older stock roms (ie: incoming call screen, the alarm screen [took me a while to figure out how to snooze this morning which meant I got to work on time ;-)], the scrolling wallpaper). All minor things but I didn't have any issues with EI22 so...

What's that EI29 build you have in your downloads folder, qbking77?

Mutiny32 said:
What's that EI29 build you have in your downloads folder, qbking77?
Click to expand...
Click to collapse
E4gt
Sent from my SPH-D700 using Tapatalk

[Q] Phone stuck at Sprint splash screen

Phone was upgraded to 4.3. I rooted it, then tried to enable the hotspot, after following a tutorial (One I am now guessing was outdated) it will no longer load past that screen. I've tried wiping the data and cache and also flashing a new mk2 to no avail. Any help would be appreciated. Thanks in advance.

Sounds like it was an outdated hotspot mod.. restore a nanoid if possible.. If not flash the stock rom that's floating around it someone's repository and start over..
Sorry i cant dig it up for you I'm on my mobile
Side note: if you have a root browser in recovery you could see if the mod backed up the originals and just reinstate them.
System》framework. There should be the 2 files there services.jar. and another I can't remember atm. If the mod backed them up you should see .bak or .old added to them
Sent from my SPH-L720

dewrust said:
Sounds like it was an outdated hotspot mod.. restore a nanoid if possible.. If not flash the stock rom that's floating around it someone's repository and start over..
Sorry i cant dig it up for you I'm on my mobile
Side note: if you have a root browser in recovery you could see if the mod backed up the originals and just reinstate them.
System》framework. There should be the 2 files there services.jar. and another I can't remember atm. If the mod backed them up you should see .bak or .old added to them
Sent from my SPH-L720
Click to expand...
Click to collapse
How would I go about attempting to restore a nanoid? Yeah I am guessing it was oudated. I changed the services and the other one, but I dont have a root browser in recovery. I am taking a look for the stock rom right now.
Found it. Downloading it, will post back with how it goes after flashing it. Thanks for the help so far. School internet is slow so it may be an hour or more to download.

Inphinity00 said:
How would I go about attempting to restore a nanoid? Yeah I am guessing it was oudated. I changed the services and the other one, but I dont have a root browser in recovery. I am taking a look for the stock rom right now.
Found it. Downloading it, will post back with how it goes after flashing it. Thanks for the help so far. School internet is slow so it may be an hour or more to download.
Click to expand...
Click to collapse
Try using xposed wanam to disable the tethering provision..
Wanam can be found in the play store and xposed framework is found in the forums
Sent from my SPH-L720

dewrust said:
Try using xposed wanam to disable the tethering provision..
Wanam can be found in the play store and xposed framework is found in the forums
Sent from my SPH-L720
Click to expand...
Click to collapse
Can I do that even though the phone won't boot past the Sprint splash screen?

Inphinity00 said:
Can I do that even though the phone won't boot past the Sprint splash screen?
Click to expand...
Click to collapse
I was referring to after you re flash a working stock rom.. The other option is to flash a near stock rom that has tethering already unlocked
Sent from my SPH-L720

dewrust said:
I was referring to after you re flash a working stock rom.. The other option is to flash a near stock rom that has tethering already unlocked
Sent from my SPH-L720
Click to expand...
Click to collapse
Oh, I will give that a try, thanks again. This stock rom is taking a while to download though.

It booted up, just set everything back up. Now to root it again and try what you said for the tethering. Thanks again!

Make a backup in recovery first before you go mucking around.

[Q] How to update with root?????

i have a sprint Samsung gs4 on mk2 that i have just rooted and the hotspot mod on. the update symbol is in the notification bar and says tap to install. my question is can i install it being rooted or what do i do ? sorry for the noob questions.

13jkilgo said:
i have a sprint Samsung gs4 on mk2 that i have just rooted and the hotspot mod on. the update symbol is in the notification bar and says tap to install. my question is can i install it being rooted or what do i do ? sorry for the noob questions.
Click to expand...
Click to collapse
You have to unroot. Follow this guide to get the ball rolling: http://forum.xda-developers.com/showthread.php?t=2509605

13jkilgo said:
i have a sprint Samsung gs4 on mk2 that i have just rooted and the hotspot mod on. the update symbol is in the notification bar and says tap to install. my question is can i install it being rooted or what do i do ? sorry for the noob questions.
Click to expand...
Click to collapse
Or go download a NAE rom and install it, or there is a thread that people have posted their Nandroid backups of the full rom to keep your root.

Darnell0216 said:
You have to unroot. Follow this guide to get the ball rolling: http://forum.xda-developers.com/showthread.php?t=2509605
Click to expand...
Click to collapse
Not quite true. You CAN install an OTA if you are rooted, though you WILL lose root and so have to re-root afterwards. Yes, the OTA MAY fail, that's true, but that's usually only the case if you're running an older version of SuperSU that had an issue that's since been fixed.
The trick that messes people up and will cause a failure (though almost definitely not a bricked phone) is you can't have actually made any changes to system files in any way. That obviously means you can't have edited any system files, used any tweaks or mods, etc. It ALSO means you can't have disabled apps using something like Titantium... if you can't disable an app via the standard system app manager but you do through Titantium then that will cause the OTA to fail.
I know this all because I've installed the last three OTAs with root with no issues, but I'm very careful about all of the above because I was burned a few times in the past until I learned

fzammetti said:
Not quite true. You CAN install an OTA if you are rooted, though you WILL lose root and so have to re-root afterwards. Yes, the OTA MAY fail, that's true, but that's usually only the case if you're running an older version of SuperSU that had an issue that's since been fixed.
The trick that messes people up and will cause a failure (though almost definitely not a bricked phone) is you can't have actually made any changes to system files in any way. That obviously means you can't have edited any system files, used any tweaks or mods, etc. It ALSO means you can't have disabled apps using something like Titantium... if you can't disable an app via the standard system app manager but you do through Titantium then that will cause the OTA to fail.
I know this all because I've installed the last three OTAs with root with no issues, but I'm very careful about all of the above because I was burned a few times in the past until I learned
Click to expand...
Click to collapse
so saying that i could update just by hitting install because i left the original files i the framework and just made them a bak file which i can go back and remove the mod files and delete the .bak and i should be able to hit install correct? and is there already root and hotspot mod avaliable for kitkat?

Well I unrooted through supersu n then updated n I put the nae hotspot mod into the framework n backed up the old file by .bak n restarted n the wifi nor the hotshot work ?? N I undid the mod n put the stock back n they still don't work so I unrooted again n they both still don't work
Sent from my SPH-L720 using xda app-developers app

Yes it is go to the development section and look.
Sent from my SPH-L720 using Tapatalk

A new download after NAE

I've been on NAE for quite awhile now. I did a very clean install including wiping the whole internal card using Philz recovery and then using odin to install the TAR file from sammobile.com. I also modified the permissions.xml file to get sdcard access, rooted with CFAutoroot , odin'd Philz latest recovery back in, and flashed fgr's hotspot mod.
Having said that, I keep getting this intermittent notification of a file being downloaded, usually right after a reboot. It's 15.2MB, and unfortunately the only file name I can see is "Samsung..". It has never finished downloading. Today it's at 10.16MB, and then it has paused again. Has anyone else seen this and knows what it is?
Thanks in advance,
Foulwx

Foulwx said:
I've been on NAE for quite awhile now. I did a very clean install including wiping the whole internal card using Philz recovery and then using odin to install the TAR file from sammobile.com. I also modified the permissions.xml file to get sdcard access, rooted with CFAutoroot , odin'd Philz latest recovery back in, and flashed fgr's hotspot mod.
Having said that, I keep getting this intermittent notification of a file being downloaded, usually right after a reboot. It's 15.2MB, and unfortunately the only file name I can see is "Samsung..". It has never finished downloading. Today it's at 10.16MB, and then it has paused again. Has anyone else seen this and knows what it is?
Thanks in advance,
Foulwx
Click to expand...
Click to collapse
It's Samsung Apps trying to download. I've had intermittent issues getting it to install. Finally did one day when at home on wifi. I've attached a copy of the app for easy downloading.
https://www.dropbox.com/s/ykr6oiuvu2ldxxw/com.sec.android.app.samsungapps-1.apk
Sent from my SPH-L720 using Tapatalk

Thanks for the info, and for the file. Before I install it, what apps are in that file? Is it an update to the original installation? I'm wondering if it is having trouble because of all the apps I removed - probably not.
Sent from my SPH-L720 using Tapatalk

Foulwx said:
Thanks for the info, and for the file. Before I install it, what apps are in that file? Is it an update to the original installation? I'm wondering if it is having trouble because of all the apps I removed - probably not.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
It's just one app ... it's Samsung's Store so to speak. It's a data apk, so you can install as long as you enable unknown sources ... like any downloaded apk. I had the problem with a totally clean install
Sent from my SPH-L720 using Tapatalk

4.4.2 KK Update Fix.

INFO: Rooted Version of NB4, I was on 4.4.2 Kit Kat leaked. I reverted to MJ5 from the leaked version then updated to NB4 and rooted with kingo.
Thanks to...
@smokeystack76
@Otisrhw
@Jakman85
@Azrael.arach
@Budrweber
UPDATE: 3/30/14
The same method has been confirmed by @Budrweber but instead of using adb, just flash from your ext sd card.
NOTE: ADB SIDELOAD WILL NOT CAUSE A WIPE, BUT PUSHING THE UPDATE FROM EXTERNAL SD WILL WIPE ALL DATA.
Few users have reported unrooting on NB4 after changing files and downloading the OTA and updating normally.
USB DEBUGGING MUST BE ENABLED, if you are this far there is no need for me to explain how to turn it on. If your phone is unresponsive to your computer even though you have installed, re-install via Kies 3. Turn Kies 3 off before running ADB.
First of all, you are going to need an ADB Sideloader and it can be found here.
Install to directory C:\Mini-SDK
We'll come back to ADB later.
Now you're going to need the update file found here.
Rename the file to update. (DO NOT NAME UPDATE.ZIP, JUST "UPDATE".)
Place "UPDATE" into the same directory as your ADB C:\Mini-SDK
Now lets leave ADB and the Update file alone and start replacing the files on your phone!
You'll need the following files.
system/xbin/dexdump (if deleted you can find the file here or you can copy/paste & replace)
system/csc/feature.xml (If deleted find it here.
Delete the original "feature.xml" and rename "feature.xml.bak" to "feature.xml")
Download the fix.zip from this page.
You do not have to reset permissions, I did not how ever do as you feel and works for you.
Step 1 copy the mobicore-presetup.sh to /system/bin
Step 2 copy all the APK files to /system/app.
Now navigate to system/bin
You should have a "ddexe" file, if it is named "ddexe_real", rename it to 'ddexe".
This should fix all the known errors in the process of adb side loading.
If you continue to get more errors use the file dump located here.
UPDATE: app_process is another recurring error, please grab this file from the dump uploaded from @smokeystack76
Now to the fun and most anticipated part of the day...
Volume + button up, power and home button all at the same time. Release once you see Recovery mode.
Navigate to Update from ADB.
Plug up to USB.
Now, when you start windows cmd prompt, you can either start from the ADB folder is located in by control, shift + right clicking or manual cmd.exe in "run" or "search"
Once command prompt is loaded,
Type in the following command.
"CD /D C:/MINI-SDK"
Then if you are in the right directory and you placed the "update" file accordingly... type...
ADB SIDELOAD UPDATE.ZIP(the file name should not have .zip or you will get a "can not read" message.)
and now you should be on your way to 4.4.2 Kit Kat.

Not bad. The system dump is here.
Now you need to post links to this thread in the other thread

Thanks for the step by step. I'll try this tomorrow.
You were on a rooted NB4, correct? You restored to MJ5, updated to NB4, rooted, and then did this?

clownfart said:
Thanks for the step by step. I'll try this tomorrow.
You were on a rooted NB4, correct? You restored to MJ5, updated to NB4, rooted, and then did this?
Click to expand...
Click to collapse
Correct.

For anyone trying to find an easy way around this whole update mess. Just go to your local best buy store and talk to one of the Samsung reps. They don't have the kit kat update yet but however they can reflash 4.3 on your phone wiping out all your data (make sure you do a back up from home) and this will let you get the OTA update with no problems. My note 3 has been rooted twice one being last night and it worked. Just make sure your not rooted when you take your phone.

Ciberious42 said:
Correct.
Click to expand...
Click to collapse
I think you should mention that in the OP for perfect clarity.
Sent from my SAMSUNG-SM-N900A using xda app-developers app

incisivekeith said:
I think you should mention that in the OP for perfect clarity.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
I did actually...

Ciberious42 said:
I did actually...
Click to expand...
Click to collapse
I didn't see in the OP that you rooted the NB4.
Sent from my SAMSUNG-SM-N900A using xda app-developers app

incisivekeith said:
I didn't see in the OP that you rooted the NB4.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Oh sorry I thought it would have been pretty clear when I mentioned you would be stuck with SU

smokestack76 said:
Not bad. The system dump is here.
Now you need to post links to this thread in the other thread
Click to expand...
Click to collapse
How do I flash this?

xuanphucn said:
How do I flash this?
Click to expand...
Click to collapse
you don't, it is used by DEV's to make a flashable update

carl1961 said:
you don't, it is used by DEV's to make a flashable update
Click to expand...
Click to collapse
Did we have any safe method yet? I want to keep root

xuanphucn said:
Did we have any safe method yet? I want to keep root
Click to expand...
Click to collapse
knoxraid
http://forum.xda-developers.com/showthread.php?t=2577273
I am currently updating the UrDroid Stock KitKat

carl1961 said:
knoxraid
http://forum.xda-developers.com/showthread.php?t=2577273
I am currently updating the UrDroid Stock KitKat
Click to expand...
Click to collapse
is this one use the official 4.4.2 or the leak?

Has anyone tried doing an emergency restore (or whatever it's called) through kies first then trying to get the OTA to work without failing?
It seems like it's 50/50 on who's works and who's fails. Am I right?

xuanphucn said:
is this one use the official 4.4.2 or the leak?
Click to expand...
Click to collapse
yes custom rom with latest OTA kitkat

Thanks OP. Worked for me. I'm ok with stock on the Note 3 that's why I got a nexus

Ciberious42 said:
Oh sorry I thought it would have been pretty clear when I mentioned you would be stuck with SU
Click to expand...
Click to collapse
So did you root with Kingo too when you were on NB4? I didn't want to use Kingo, but I thought what the heck, and used it for quick rooting. Then after the Kitkat update, I realize I have SuperSU as a system app even after factory reset. Apps like CPU-Z reports my devices is rooted when it's not.
Is this the only thing that's not same as pure stock NC2?

hp79 said:
So did you root with Kingo too when you were on NB4? I didn't want to use Kingo, but I thought what the heck, and used it for quick rooting. Then after the Kitkat update, I realize I have SuperSU as a system app even after factory reset. Apps like CPU-Z reports my devices is rooted when it's not.
Is this the only thing that's not same as pure stock NC2?
Click to expand...
Click to collapse
you can re-run and use kingo to remove the root

Also if you are weary of the update, back up your files and apps then factory reset. Once you are factory reset, download the OTA but just hit "remind me later".
Do the instructions in the OP and after it installs it tells you that you have an update pending, install the update and it covers any files that may have went missing in the update.zip.
If you wanted to be 200% sure.
I am set at official and with no custom lock and Knox is 0x0.