hello everyone im stuck, i have at&t sgh-i337 on 4.3 had trouble getting cwm on but figured it out. no custom rom would install after that so i tried safestrap and was trying to install custom rom, it was then stuck in a bootloop showing safestrap is active. tried to revert back to stock and now im where im at now. i cannot get into download mode or even recovery anymore. if i hold any buttons down while booting it just reboots and if i do nothing it will sit on the samsung custom screen with an open lock for ever. any ideas? think i may have completely bricked it somehow
i can get into download mode with usb cable plugged in but odin will not install anything. always says fail. i suspect the 4.3 is the cause but is there anything i can do?
malevole3t said:
hello everyone im stuck, i have at&t sgh-i337 on 4.3 had trouble getting cwm on but figured it out. no custom rom would install after that so i tried safestrap and was trying to install custom rom, it was then stuck in a bootloop showing safestrap is active. tried to revert back to stock and now im where im at now. i cannot get into download mode or even recovery anymore. if i hold any buttons down while booting it just reboots and if i do nothing it will sit on the samsung custom screen with an open lock for ever. any ideas? think i may have completely bricked it somehow
i can get into download mode with usb cable plugged in but odin will not install anything. always says fail. i suspect the 4.3 is the cause but is there anything i can do?[/QUOTE.
You need to Odin back to stock. Here are the tar files
http://forum.xda-developers.com/showthread.php?t=2621279
Then please read the all in one guide. It has everything you need to root, install Safstrap recovery, and a list of compatible roms for mk2. Be sure to thank the op in the threads. Good luck & post your results.
http://forum.xda-developers.com/showthread.php?t=2616221
Click to expand...
Click to collapse
malevole3t said:
hello everyone im stuck, i have at&t sgh-i337 on 4.3 had trouble getting cwm on but figured it out. no custom rom would install after that so i tried safestrap and was trying to install custom rom, it was then stuck in a bootloop showing safestrap is active. tried to revert back to stock and now im where im at now. i cannot get into download mode or even recovery anymore. if i hold any buttons down while booting it just reboots and if i do nothing it will sit on the samsung custom screen with an open lock for ever. any ideas? think i may have completely bricked it somehow
i can get into download mode with usb cable plugged in but odin will not install anything. always says fail. i suspect the 4.3 is the cause but is there anything i can do?
Click to expand...
Click to collapse
What did you try to flash in Odin? You need the mk2 firmware
Sent from my Nexus 5
Related
I have an i337 NC1 build Galaxy S4 (AT&T). I'm totally new to custom roming, but I wanted to give it a shot for fun. I tried using towelroot along with SuperSu, and TWRP Manager to flash TWRP onto my phone because it supposedly worked on NC1. Apparently I did something wrong because I no longer have a recovery mode. It just gives the downloading/target screen when I try to access it. Am I screwed or is there some possible way for me to fix this? Thanks!
Nebni said:
I have an i337 NC1 build Galaxy S4 (AT&T). I'm totally new to custom roming, but I wanted to give it a shot for fun. I tried using towelroot along with SuperSu, and TWRP Manager to flash TWRP onto my phone because it supposedly worked on NC1. Apparently I did something wrong because I no longer have a recovery mode. It just gives the downloading/target screen when I try to access it. Am I screwed or is there some possible way for me to fix this? Thanks!
Click to expand...
Click to collapse
im also now suffering with this problem, rom just stopped working and ive been trying for 3 days to get it back ......
cant get into recovery but can get into download mode.............stock rom doesnt work even with a pit flash.....
ive even tried that qhusb repair thing.
if anyone knows how to get a recovery back it would be great??
Tried using ODIN to flash a recovery (TWRP for example) through download mode?
Example, google up: odin twrp recovery I9505
Also, using volume up or down to enter recovery mode?
Nebni said:
I have an i337 NC1 build Galaxy S4 (AT&T). I'm totally new to custom roming, but I wanted to give it a shot for fun. I tried using towelroot along with SuperSu, and TWRP Manager to flash TWRP onto my phone because it supposedly worked on NC1. Apparently I did something wrong because I no longer have a recovery mode. It just gives the downloading/target screen when I try to access it. Am I screwed or is there some possible way for me to fix this? Thanks!
Click to expand...
Click to collapse
You can't just install a recovery just like that because at&t has a locked bootloader. You will probably need something like safestrap.
Go to the proper forum for help.
http://forum.xda-developers.com/galaxy-s4-att/help
Gavin01 said:
im also now suffering with this problem, rom just stopped working and ive been trying for 3 days to get it back ......
cant get into recovery but can get into download mode.............stock rom doesnt work even with a pit flash.....
ive even tried that qhusb repair thing.
if anyone knows how to get a recovery back it would be great??
Click to expand...
Click to collapse
That's a completely different problem. Sounds more like a hardware failure. But you should make your own thread with way more information if you want people to take a closer look.
Lennyz1988 said:
You can't just install a recovery just like that because at&t has a locked bootloader. You will probably need something like safestrap.
Click to expand...
Click to collapse
Ah, right. Forgot about AT&T not exactly being so customize friendly, unlike the non-AT&T phones. Scratch what I said in my above post. AT&T phones have more restrictions (security) when it comes to flashing, etc. Use the link above and make sure you find a proper thread that will help you out.
i wanted to try custom rom i rooted, had custom recovery and when i went to move from stock to cm11 and i didnt like it i tried to revert back to stock now im not able to do nothing im getting bunch of errors
odin fails to flash i tried all kinds of odin tuts
even tried chainfires one click setup nope fails
and i have this text on phone thats states i have write protection on...
but point is i just want to recover my phone all i can get into is recovery and download mode fine but thats it and when i try to flash anything in recovery i get state 7 or error 7 poping up im worried i just got the phone and i want it back to being alive agian any help be very much help i been up hours trying everything
sph-L720
Windows 8.1 x64
all usb drivers installed 4 times
krazeyfire said:
i wanted to try custom rom i rooted, had custom recovery and when i went to move from stock to cm11 and i didnt like it i tried to revert back to stock now im not able to do nothing im getting bunch of errors
odin fails to flash i tried all kinds of odin tuts
even tried chainfires one click setup nope fails
and i have this text on phone thats states i have write protection on...
but point is i just want to recover my phone all i can get into is recovery and download mode fine but thats it and when i try to flash anything in recovery i get state 7 or error 7 poping up im worried i just got the phone and i want it back to being alive agian any help be very much help i been up hours trying everything
sph-L720
Windows 8.1 x64
all usb drivers installed 4 times
Click to expand...
Click to collapse
When you trying Odin back the firmware you need to make sure your not trying to downgrade if you updated from 4.3 or above. If you are on 4.3 or above make sure your either using the same firmware or a newer firmware. If you use an old firmware it will always fail. So downloading the newest firmware will be your best bet.
Sent from my SPH-L720 using XDA Free mobile app
Same Boat with a friends phone
I am flashing NAE and NG2 firmware to the sprint s4 (no fails) but after the flash I am still only able to get to recovery and download mode. Side note: when trying to nandroid back up the phone reboots and will not create a backup. Please advise what if any fix I may look into.
Thank you,
Erik
erikbenedict3 said:
I am flashing NAE and NG2 firmware to the sprint s4 (no fails) but after the flash I am still only able to get to recovery and download mode. Side note: when trying to nandroid back up the phone reboots and will not create a backup. Please advise what if any fix I may look into.
Thank you,
Erik
Click to expand...
Click to collapse
ive gotten it restored back to stock but the sprint boot animation is gone i want that back i was fond of it so if anyone know how to restore the oringal sprint carrier boot animation w/ sound?
Hi guys,
I have a T-Mobile Note 3 running 4.4.2 and I'm having the hardest time installing a custom recovery such as CWM or even TWRP. I was having problems the last few days with my older phone and decided to get a free replacement because I thought it was the phone. Anyways I open my phone, boot it up, install latest software, and restart to download mode. I root it with ODIN and restart. Then I restart it again and install CWM recovery. Everything goes smoothly, everything is in the green. Then I hold volume UP, menu, and power keys and it says "Could not do normal boot. What is this? It was happening on my older Note 3 and now this one.
Everything works fine when I try to boot it normally and I can use the phone but cannot seem to install a custom recovery. Instead of booting to the recovery screen, it goes to Odin/downloading mode with a message above 'Odin Mode' that reads 'Could not do normal boot'.
I am not new to this. I have done this before many times but for some reason it is not working for me anymore. Is it the new firmware and/or the updated software that is preventing me from doing this? I have researched this night and day last 72 hours but can't find a solution.
Please help, and thanks in advance!!
Figured I'd give it a bump. Any thoughts guys?
the_real_vlad said:
Figured I'd give it a bump. Any thoughts guys?
Click to expand...
Click to collapse
Which bootloader is the phone on, and which CWM/TWRP versions are you using? You sure you downloaded the right ones for your model?
jisoo said:
Which bootloader is the phone on, and which CWM/TWRP versions are you using? You sure you downloaded the right ones for your model?
Click to expand...
Click to collapse
Hi,
Firmware on my phone: N900TUVUENK3
Recovery: n900s-cwm-recovery-6.0.4.4(1011).tar, openrecovery-twrp-2.6.3.2-hltetmo.tar
As for the bootloader, I have no idea. It is stock however, I know that.
Solved!
What I did was download the VERY LATEST twrp from the official website and flash with odin. Then I wiped EVERYTHING and reinstalled the firmware. Last, reinstalled TWRP.
All is well
So, I was going to install a Lollipop rom and I thought I followed directions correctly but it gets stuck at the "Powered by Android" very first screen. Booting into recovery gets me into the simple manual recovery mode and not safestrap. Odin also doesn't seem to recognize that I've connected my phone - although maybe there's a special way to do it?
I basically need help getting my phone working again. I've dug around but everything seems focused around using Odin and I don't know how to get that to see my phone in the state that it's in.
Help!
So, reasons I am dumb #1: I had no idea what the key combo to boot into Odin was (volume down+home+power) So, now I can get to Odin and I'll try to figure it out from here unless someone jumps in with something before I do.
Sheesh. Sigh.
im in need of help myself as I went to root my sm-g900v and now am stuck in bootloop.. how do i fix this? no matter what I do to get it to restart, same result....
rlo5ca said:
im in need of help myself as I went to root my sm-g900v and now am stuck in bootloop.. how do i fix this? no matter what I do to get it to restart, same result....
Click to expand...
Click to collapse
From Download Mode, just flash a stock ROM. If you hadn't rooted yet, you can use Kies 3, from Samsung, to reset your phone to newest ROM, correcting any issues. Verizon also has a Software Repair tool you can try, but I like Kies better. All the info you need is in the stickies.
My s4 was rooted about a year ago with the logo SAMSUNG and Unlocked with an open lock below it when it boots up. I gave this phone to my girlfriends daughter and forgot to tell her not to try and update it. I don't remember the way i rooted it or what software it had on it at the time.
So when I go to recovery after it loads into an AT&T logo and tries to install it and it gets to 24%. After this it bootloops. Any help would be appreciated. My phone model is SGH-I337 , also not sure of what the original firmware is.
StephenTiz said:
My s4 was rooted about a year ago with the logo SAMSUNG and Unlocked with an open lock below it when it boots up. I gave this phone to my girlfriends daughter and forgot to tell her not to try and update it. I don't remember the way i rooted it or what software it had on it at the time.
So when I go to recovery after it loads into an AT&T logo and tries to install it and it gets to 24%. After this it bootloops. Any help would be appreciated. My phone model is SGH-I337 , also not sure of what the original firmware is.
Click to expand...
Click to collapse
Open lock symbol means your phone is rooted not unlocked.
If you could go to the recovery mode (voloume-up+home+power) it would tell you your firmware version. You could try clear cache, factory reset in recovery mode. If it still gives you the bootloop, you might need to flash the firmware via odin.
You can find instructions and necessary files in here and here.
No recovery options
Sorry I left that part out. When it goes to recovery i get the blue text that say recovery then it goes straight to the AT&T installing. So no recovery options. I can still get to the Odin dowloading screen though and it says im running Samsung Original software
No recovery options
sway8966 said:
Open lock symbol means your phone is rooted not unlocked.
If you could go to the recovery mode (voloume-up+home+power) it would tell you your firmware version. You could try clear cache, factory reset in recovery mode. If it still gives you the bootloop, you might need to flash the firmware via odin.
You can find instructions and necessary files in here and here.
Click to expand...
Click to collapse
Sorry I left that part out. When it goes to recovery i get the blue text that say recovery then it goes straight to the AT&T installing. So no recovery options. I can still get to the Odin dowloading screen though and it says im running Samsung Original software
StephenTiz said:
Sorry I left that part out. When it goes to recovery i get the blue text that say recovery then it goes straight to the AT&T installing. So no recovery options. I can still get to the Odin dowloading screen though and it says im running Samsung Original software
Click to expand...
Click to collapse
One reason I asked you to go to the recovery option was to know what version of firmware you were on before .
Do you remember you were on jelly bean or kick-kat or lollipop? If you do you can find the firmware for jelly bean and kit-kat on the links I mentioned in the previous message.
If you could not recall your firmware, the latest odin flashable firmware we have is kit-kat NB1.
You can flash that one to revive your phone. Then use twoel root to root the phone. After that you can go to lollipop if you want. All the instructions are there.
Woop Woop!
sway8966 said:
One reason I asked you to go to the recovery option was to know what version of firmware you were on before .
Do you remember you were on jelly bean or kick-kat or lollipop? If you do you can find the firmware for jelly bean and kit-kat on the links I mentioned in the previous message.
If you could not recall your firmware, the latest odin flashable firmware we have is kit-kat NB1.
You can flash that one to revive your phone. Then use twoel root to root the phone. After that you can go to lollipop if you want. All the instructions are there.
Click to expand...
Click to collapse
It worked. I have tried so many different firmware and kit-kat NB1 worked perfectly. Thank you so much, my girlfriends daughter will be so happy. I think i will leave it unrooted for now. I hope this post helps someone else in the future.
StephenTiz said:
It worked. I have tried so many different firmware and kit-kat NB1 worked perfectly. Thank you so much, my girlfriends daughter will be so happy. I think i will leave it unrooted for now. I hope this post helps someone else in the future.
Click to expand...
Click to collapse
I am glad that it works out for you.
Rooting is so easy from that point. Just get towel root and root it. The link also included in my previous post. After the root you might need to disable the AT&T OTA update too. The instructions are also in that post too.