[Q] Does re-installing same firmware via ODIN void Knox warranty (0X1)? - Galaxy Note 3 Q&A, Help & Troubleshooting

Hi All:
I have a confusion, that is, Will Knox warranty will void (0X1) if I flash same firmware through ODIN in 4.4.2 ?
Explaining bit more:
Currently I am using below official firmware in my SM-N900 firmware:
AP: N900XXUDNA9
CP: N900DDUDNA1
CSC: N900ODDDNA3
Now if I re-flash the below same firmware through ODIN will it VOID my Knox warranty or not? I meant (0X1)
PDA: N900XXUDNA9
MODEM: N900DDUDNA1
CSC: N900ODDDNA3

No, but why do this?

Related

no WIFI after 4.3 flash wifi fix doesnt work

guys I've installed this from Djembley
Model: GT-I9505 (4.3)
PDA: XXUEMJ7
PHONE: XXUEMJ7
CSC: ITVEMJ8 (1 code)
Kernel: 3.4.0-1765174 (15.10)
KNOX WARRANTY VOID - 0x1
Build Date: 15.10.2013
Changelist: 1765174
thing is that i dont have wifi at all..rest is fine. tried wifi fix - no luck.
I was previosly on 4.2.2 MGG
bidav1 said:
guys I've installed this from Djembley
Model: GT-I9505 (4.3)
PDA: XXUEMJ7
PHONE: XXUEMJ7
CSC: ITVEMJ8 (1 code)
Kernel: 3.4.0-1765174 (15.10)
KNOX WARRANTY VOID - 0x1
Build Date: 15.10.2013
Changelist: 1765174
thing is that i dont have wifi at all..rest is fine. tried wifi fix - no luck.
I was previosly on 4.2.2 MGG
Click to expand...
Click to collapse
Hi.
I'm not sure if this will work for u.
U may try here: http://forum.xda-developers.com/showpost.php?p=47116514&postcount=7421 and http://forum.xda-developers.com/showpost.php?p=47122180&postcount=7429
Cheers.
bidav1 said:
guys I've installed this from Djembley
Model: GT-I9505 (4.3)
PDA: XXUEMJ7
PHONE: XXUEMJ7
CSC: ITVEMJ8 (1 code)
Kernel: 3.4.0-1765174 (15.10)
KNOX WARRANTY VOID - 0x1
Build Date: 15.10.2013
Changelist: 1765174
thing is that i dont have wifi at all..rest is fine. tried wifi fix - no luck.
I was previosly on 4.2.2 MGG
Click to expand...
Click to collapse
check the router it might have problem
if yes then rest it cos i also faced this problem in 4.2.2 build but it was router problem
good luck :good::good:
http://www.mediafire.com/download/ll6ibgor2zi87at/i9505+wifi+sorunu.rar iNSTALL root, install recovery -> odin 1.8 and flash wifi trick.zip for sd.100% test
Did that. No changes. Still can't enable wifi. Anybody any ideas?

[Q] i9505 safe update?

Hi all
I have i9505 with:
AP: XXUDMH9
CP: XXUDMH9
CSC: DTMDMH2
The device is stock as it could be but is already with the KNOX bootloader. If I flash the following firmware (downloaded from $amsung) will my device status and knox counter remain untouched? (flash with odin 3)
PDA: I9505XXUEMKF
CSC: I9505OXXEMK3
MODEM: I9505XXUEMKF
The correct firmware for ya is: HERE. In theory only KNOX will be 0x1 if u root it, u want come back to android 4.2.2 or install custom kernel/recovery. Flashing STOCK ROM dont have to be a problem with KNOX :fingers-crossed:

[Q] Bootloader free N9005 downgrade 4.4.2 to 4.3?

The question here is N9005 is on 4.4.2 firmware.
Is it possible to downgrade using bootlloader free custom rom using CWM?
Since it is not possible to downgrade bootloader this could only be possible if 4.3 can work with bootloader of 4.4.2. And sure it will void KNOX warranty.
Here is a bootloader free custom rom
Model: SM-N9005 (4.3)
PDA: XXUDMJ7
PHONE: XXUDMJ7
CSC: OXXDMJ4 (21 codes)
Kernel: 3.4.0-2019540 (30.10)
KNOX WARRANTY VOID - 0x1
Build Date: 30.10.2013
Changelist: 2019540
Pre-Rooted ROM: BOOTLOADER FREE Odex
http://www.androidfilehost.com/?fid=23212708291681863
Model: SM-N9005 (4.3)
PDA: XXUDMJ6
PHONE: XXUDMJ4
CSC: OXADMJ4 (5 codes)
Kernel: 3.4.0-1937874 (21.10)
KNOX WARRANTY VOID - 0x1
Build Date: 21.10.2013
Changelist: 1937874
Pre-Rooted ROM: BOOTLOADER FREE Odex:
http://www.androidfilehost.com/?fid=23159073880934643
Wait. Are you saying you can downgrade back to jellybean without downgrading bootloader?
4.4.2 runs only with 4.4 bootloader. 4.3 runs only with 4.3 bootloader. You can't use 4.3 ROM with 4.4 bootloader or vice-versa.
You have to downgrade or stick with KitKat. First one being impossible as far as we know.
Someguyfromhell said:
4.4.2 runs only with 4.4 bootloader. 4.3 runs only with 4.3 bootloader. You can't use 4.3 ROM with 4.4 bootloader or vice-versa.
You have to downgrade or stick with KitKat. First one being impossible as far as we know.
Click to expand...
Click to collapse
So is it possible or not ? Anyone tried them ?

last modem without knox

hi,
i've lost the package for the modem without knox
i'm on gt-i9505
currently i've
AP: I9505XXUGNF1
CP: I9505XXUBMGA
CSC:I9505OXAGNF1
I'm from italy
netanalyzer said:
hi,
i've lost the package for the modem without knox
i'm on gt-i9505
currently i've
AP: I9505XXUGNF1
CP: I9505XXUBMGA
CSC:I9505OXAGNF1
I'm from italy
Click to expand...
Click to collapse
Hi,
Not sure what you want , modem do not have knox , the problem comes from using them with the rom bootloader
http://forum.xda-developers.com/showpost.php?p=50787570&postcount=2549
here is explaned and in the first post offers you different modems and the wifi fix
yeah sry i need the last working modem without knox
netanalyzer said:
yeah sry i need the last working modem without knox
Click to expand...
Click to collapse
Knox has nothing to do with modem...but anyhow
First firmware with knox was I9505XXUDMGG , so in your case the previous one without knox bootloader would be
Model: GT-I9505
Model name: GALAXY S4 LTE
Country: Italy
Version: Android 4.2.2
Changelist: 1081224
Build date: Thu, 11 Jul 2013 10:56:37 +0000
Product Code: ITV
PDA: I9505XXUBMGA
CSC: I9505ITVBMH1
MODEM: I9505XXUBMGA
This modem I9505XXUBMGA or any before this
In the link i gave you before you can find some...
tnx you i've found it
now i've
ap I9505XXUGNF1
cp I9505XXUBMH1
cscs i9505OXAGBF1
this is correct?
i need the lte file too
i've strange problem
screen off =>no signal when i switch on the screen signal is return
i've tried different rom (with full wipe) but the same issue
i've tried to change prefered network tipe 3g instead of lte but same problem
i'll become mad
so i can flash last 4.4.4 modem with the old bootloader without take the knox flag? i don't understand this point sry
i've fixed my issue
with this post
http://forum.xda-developers.com/showpost.php?p=55475958&postcount=528
use odin to flash it select phone
remember flash twice both file and untick auto reboot option

[Q] SM-N9005 flash latest XTC or BTU NF4 over XFV (South Africa Vodafone) via MOP

Hello to all,
Current Info: haven't flashed any other rom, only update via OTA then rooted via towelroot thanks to @geohot, knox 0x0 (installed knox v1.0.0xxuenc2):
Country: South Africa (Vodafone) - region unlock: I'm currently using here in Philippines with a local simcard without issues
Model: SM-N9005 (32gb)
Model name: GALAXY Note 3 LTE
Product Code: XFV (original)*
PDA: N9005XXUENC2 (so far this is the latest for xfv)
CSC: N9005VFGENA4 (multi csc - same with UK vod)
MODEM: N9005XXUENC2
As from the title these are the following questions:
1. Can I also use "N9005XXUFNF4_hlte_Stock_Odex_Not_Rooted_NoKnox.zip" by @mdiaz33685 to upgrade to btu NF4 over xfv NC2? taken from @sweeney_uk post http://forum.xda-developers.com/showpost.php?p=53952241&postcount=1
2. How about using official btu NF4 from sammobile.com then flash via MOP?
(It's clear to me that flashing later/latest version will not trip knox but i'm hesitant because I haven't found in the forum that flash over from exact product code of mine xfv to a different csc)
3. What are the issues using BTU NF4 in Asia?
4. What if I use official xtc NF4 firmware from sammobile.com then load in open file section via MOP, will this work without tripping knox?
I want to keep root access and knox 0x0 and unbrand my phone (i prefer to have xtc so I can receive OTA here) . As much as possible I don't want to use PC odin because some user soft bricked their phone and I think i can't revive mine via kies since it doesn't support initialization of different region csc.
Sorry for this redundant questions as I already post this to other threads. I decide to make this thread hoping to get more advice because I want to be 100% sure. Thanks in advance

Categories

Resources