Database Users

Anyone have a Bluetooth Fix Or Cab to correct the TP2 CDMA Stack error?

Hello,
I have a CDMA (Sprint) TP2 and I love it but I am getting an error message when attempting to connect to the bluetooth on the phone at times. The error that I have started recieving is could not start stack (or some mess about a stack could not be started) error message. The bluetooth ICON at the top of the screen shows as if it is connected but it will not work when I make a call or attempt to listen to music and I have to restart the phone to have it start working again. The BT icon shows at the top of the screen as if it is working but when you go to settings it is listing as if it is off.
Only restarting the phone corrects this issue at this time for me and I was wanting to see if any of my great friends on XDA had a CAB file or method of correcting this BT issue on the TP2?
I love this phone but I use my BT all day and it goes into a type of sleep mode like my old Treo 700wx used to do and it will not allow me to reconnect to the BT when i get a call so having it connected to the phone all day is a waste and the BT is really poor on this phone out of the box. I thank you guys for all the great things you do for this phone and other phones and please help.

WIFI/Bluetooth Issue - EXTREMELY FRUSTRATING

I am having this horrible issue with my Wifi and bluetooth.
1. WIFI: When I turn on WiFi after a reboot it works flawlessly, connects to my wifi network and I can zoom around the net just dandy. As soon as I go out of range of WiFi or manually disconnect it it will NOT turn back on it says "Unable to start Wifi" until I do a full reboot. So annoying.
2.) Bluetooth: When connecting to my Headset it connects just fine after a reboot. HOWEVER, after pairing, if I put the X10 standby with the powerbutton before making a call it will drop the bluetooth audio connection and only play sound through the earpiece. Even though it SAYS it's still connected and paired. And THEN when I shut off bluetooth and try to turn it back on, pretty much the same as the wifi thing except I get no error message it just tries to initiate bluetooth and then sits for a few minutes and then I guess gives up and keeps the bluetooth shut off without any indication of failure.
I'm guessing it's defective but if anyone has had this issue, please speak up! And even better if you know how to solve it. Thanks!! =)

I too am having the same issue with wifi. Also my x10 is superslow on my wifi @ times. So i run a speedtest and I get 3MB, which is fast, but the phone isn't using that speed while browsing the internet.

Hello,
I experienced the same thing as you. Moreover I have a trouble with Bluetooth in my car. After few seconds (around 1 minute) of talk, I don't loose the BT connexion but nobody understand me !!!

Have you tried your BT?

Have you got a task killer running that's killing your bluetooth and wifi?
Sent from my X10i using the XDA mobile application powered by Tapatalk

[Update]Bluetooth Issue, freeze my TAB

hi
Im running the stock JK6 and rooted.
when Im running e.g. the liveview app my phone keeps some kind of freezing after a few minutes, first I tought it is app related but now I revieved my OBD2 scanner for my car and its just the same with the app "torque".
is this a hardware related problem or something wrong with this ROM.
did a HR several times and reflashed the ROM.
Edit: I noticed when bluetooth recieve or send data I cant get any other wireless date like on wifi or on radio.
please help
Seems to be a one time event with the data problem but the main thing keeps annoing me

Have you tried pulling the battery waiting 60 seconds placing the battery back in the phone and then rebooting?

Eh no cause on the galaxy tab the battery cant be removed

NightFire123 said:
hi
Im running the stock JK6 and rooted.
when Im running e.g. the liveview app my phone keeps some kind of freezing after a few minutes, first I tought it is app related but now I revieved my OBD2 scanner for my car and its just the same with the app "torque".
is this a hardware related problem or something wrong with this ROM.
did a HR several times and reflashed the ROM.
Edit: I noticed when bluetooth recieve or send data I cant get any other wireless date like on wifi or on radio.
please help
thanks
Click to expand...
Click to collapse
I don't Know, but if you have a Bluetooth PAN connection to the internet, then it should be not possible to have another connection to the internet. IP routing to the gateway would be confused if you could.
There are tools that "group" several separate internet connections into one virtual one.

no Im not using a bt PAN to connect the inet, only normal bluetooth data usage

Push
Just only me who is facing this annoing problem?

Same problem with OBD2 :s disable GPS reduc freeze loop. But not fully (30 minutes). Next time i will turn off Data conection.
Every time i've freeze now i see torque try reconnect to OBD2, seem like BT of SGT turned off or time out

I am having the same problem. As long as I have bluetooth turned on, it will hang the Tab within 30 min. All bluetooth connections are definitely gone. Turning off the bluetooth won't help. The only way is to reboot and never turn bluetooth on.
BTW, I have tried connecting LiveView or a normal bluetooth headset. Both cause the same problem.
I am on JK2.

It seems it is bluetooth driver conflicting with any other data connections.
Did a further testing. Disabled Wifi, but doing data communication via 3G network while turning bluetooth on. The tab hangs in a few minutes. Found a process called 'btld' sucking up all the CPU circle.
Any ideas what 'btld' is?
Thought this should not be a hardware problem because bluetooth works fine when all data connections are off and Wifi/3G data works fine when bluetooth is off. It must be some sort of default setting isn't correct. If this is the case, then root would be a must before manually tuning any parameters.

Found root cause. It is actually the SonyEricsson LiveView software causing troubles. After removing, everything goes well.
Checked on SonyEricsson's web site, it seems Froyo is yet to be supported.

try to use WO Webcam B-Lite out of market, you can open a bt connection by pressing activate and then while running, close via taskmanager, voila the freeze begun

I've got galaxy Tab and galaxy S, and torque badly freezes the devices almost every time I exit the application. It cannot be an hardware fault since I use lot of bluetooth devices and always 3g connected, never had issues. Just with torque, and I don't have any "sony liveview" thing.
Reading on the comments of Torque it seems that also other devices have the same freeze issue (especially a phone called "Evo 4G"). Many months ago I sent a mail to the developer explaining the bug but he bumped me away replying that the app is tested and working on GalaxyTab (and obviously it's not true, or he did some mistake in testing). Now lots of people with this Evo 4G are complaining and the developer is trying to fix. let's hope..

WiFi tethering issue

I know this is not exactly Android head unit topic but it's closely related to using the device.
So here's what's going on. When I manually turn on wifi tethering (Hotspot) on my phone (NOA H10, 7.1.1 nougat), device (head unit) connects to it as it should, and everything works.
On the otherhand when I use tasker, or any other app to trigger wifi tethering on Bluetooth connection, the hotspot turns on but device can't connect to it. I get obtaining IP address issue, and when I set to static IP it connects for a few seconds and then drops the connection. It's really frustrating because I know it can work.
I know l can always turn the hotspot on manually when I get into the car but I want it to be automatically turned on when Bluetooth connects to my unit.
Anyone else has/had this kind of issues? Any ideas/solutions?

AFAIK most of these units don't support bluetooth tethering at all. Not really sure if any do at all.
Sent from my iPhone using Tapatalk

I'm not talking about bluetooth tethering.

Ok I get it, trigger wifi on bluetooth connection with the triggering attempted on the phone side.
I have 0 experience with android phones but I know my iphone will never allow a connection (to anything) unless you open the hotspot setting manually. When I do that my units all automatically connect.
Sent from my iPhone using Tapatalk

I use Macrodroid app to activate the hotspot when muy phone is conected by bluetooth, and all runs ok

I tried macrodroid. Same thing as the other apps. It turns on hotspot but can't connect to it.

So here's the SITREP, when I use connected to a bluetooth device trigger without specifying a device, the hotspot works. Only if variable, device name and/or mac address is specified the device will not connect to hotspot.

Install and use this plugin

Doesn't work. But I managed to get it work with secure settings and touch task plugins.

Tux2609 said:
Doesn't work. But I managed to get it work with secure settings and touch task plugins.
Click to expand...
Click to collapse
Can you elaborate please? I'm also having this EXACT same issue.
Thanks.

jks8496956 said:
Can you elaborate please? I'm also having this EXACT same issue.
Thanks.
Click to expand...
Click to collapse
I'm using secure settings and touch task Tasker plugins to simulate manual hotspot toggle. When my phone connects to my headunit it triggers screen on then screen unlock to unlock the phone, then quick settings (drop down) menu and finally touch on hotspot tethering icon. Same command is executed on Bluetooth disconnected status.

I got auto bluetooth tethering working, or did I..?

So today I installed my new Eonon GA2185. I was hoping it would be able to tether my phone's internet on bluetooth automatically, without ever having to manually activate bluetooth or hotspot or something like that. It's a mythical function. Some say it's impossible, you'll always have to click at least one button to connect your head unit to the interwebs, some say it's a built in function.
When turning on the radio for the first time and connecting it to my phone's bluetooth I was so desperately hoping it would also borrow its internet, and apparantly it did! There was no wifi network, just bluetooth and I managed to visit some webpages and perform a speedtest (< 1Mb/s, but hey it was something!).
Unfortunately, after customising the unit with all my preferences, apps, accounts and appearances, I lost the bluetooth tethering. It simply stopped working. It only works on wifi now. Anyone know how to get it back or enable it in the first place? I've already reset it to factory settings but that didn't do it.
This unit works on bluetooth 4.0. Does the difference between 4 and 5 matter a lot in this aspect?

iLikePizzas said:
So today I installed my new Eonon GA2185. I was hoping it would be able to tether my phone's internet on bluetooth automatically, without ever having to manually activate bluetooth or hotspot or something like that. It's a mythical function. Some say it's impossible, you'll always have to click at least one button to connect your head unit to the interwebs, some say it's a built in function.
When turning on the radio for the first time and connecting it to my phone's bluetooth I was so desperately hoping it would also borrow its internet, and apparantly it did! There was no wifi network, just bluetooth and I managed to visit some webpages and perform a speedtest (< 1Mb/s, but hey it was something!).
Unfortunately, after customising the unit with all my preferences, apps, accounts and appearances, I lost the bluetooth tethering. It simply stopped working. It only works on wifi now. Anyone know how to get it back or enable it in the first place? I've already reset it to factory settings but that didn't do it.
This unit works on bluetooth 4.0. Does the difference between 4 and 5 matter a lot in this aspect?
Click to expand...
Click to collapse
Ive got the same problem, I have the same unit as you.
I had it working when I first installed the unit, it just came on automatically when I entered the car. But since a firmware upgrade I cant get it to connect anymore! It was great for Spotify and maps.
If you manage to find a way let me know!

I believe I factory reseted everything again after updating. Then I tried connecting bluetooth first and then WiFi. For some reason that worked (after I rebooted the device, it would turn on wifi but my phone's wasn't broadcasting, and then it automatically switched to bluetooth).
I also noticed that whenever the unit was powered on, an extra setting in my iPhone appeared called 'Ethernet', which apparanly means that it's tethering through bluetooth. Not sure if Android has a similar way of showing.