[Q] - S4 I9500 Can't connect to Odin and KIES - Galaxy S 4 Q&A, Help & Troubleshooting

Hello,
I have S4 gt-i9500 4.3 firmware and I am trying to update it to 4.4.2 but unfotunatly I can't connect to Odin, a warning message in device manager (windows 7 x64) show "Samsung usb modem". Please can you help me to update my phone ? Best regards.

mayfo said:
Hello,
I have S4 gt-i9500 4.3 firmware and I am trying to update it to 4.4.2 but unfotunatly I can't connect to Odin, a warning message in device manager (windows 7 x64) show "Samsung usb modem". Please can you help me to update my phone ? Best regards.
Click to expand...
Click to collapse
reinstall your Samsung USB Drivers

deandoi said:
reinstall your Samsung USB Drivers
Click to expand...
Click to collapse
thanks for your answer but the problem still exist after reinstall Samsung USB Drivers v1.5.33.0.
No chance :crying:
Anyone have an idea ?
BR

If fw is android 4.3 must use kies 3 not the ordinary kies
Sent from my GT-I9505

theo80 said:
If fw is android 4.3 must use kies 3 not the ordinary kies
Sent from my GT-I9505
Click to expand...
Click to collapse
Thank you vey much for you answer...It's working :good:

Try this guys, maybe it works.. I m planing to try this on my S4 (i9500) handphone tomorrow(i hope it works)
The basic concept is to change "windows driver mode/option" from "Samsung Android Interface" into "Samsung mobile USB CDC Composite device".
it got this trick from this guy at youtube, the video clip seems convincing , also thanks to him
go to youtube , search for this video -> " 6bXNlFr_A9k "
[[Solved] Odin doesn't detect the phone Windows Shows Gadget Serial Device Download Mode ]

Related

please help , my galaxy s4 doesnt get software updates

Hi .. my galaxy s4 doesnt get any firmware updates and stuck at XXUAMDK .. im living in egypt and my phone is i9500 unlocked .. should I update it via Odin3 ? .. any more safe way ??
someone2287 said:
Hi .. my galaxy s4 doesnt get any firmware updates and stuck at XXUAMDK .. im living in egypt and my phone is i9500 unlocked .. should I update it via Odin3 ? .. any more safe way ??
Click to expand...
Click to collapse
Odin 3.04 is safe, just close Kies (also in windows task manager) and enable usb debugging on the phone. The latest Egyptian rom is MEA and download from here http://www.hotfile.com/dl/230515215/1a13e35/I9500XXUBMEA_I9500OJVBMEA_EGY.zip.html.
Are you sure ?!! .. ok please stay with me when I finish downloading and flashing .. im worrying about it , its really expensive
someone2287 said:
Are you sure ?!! .. ok please stay with me when I finish downloading and flashing .. im worrying about it , its really expensive
Click to expand...
Click to collapse
Follow item 1 in my signature.

[Q] SM N 9005 Will not connect to Odin.

Hello everyone.
Just received my Note 3 out of box and getting ready to root and try some of the great work available in this section of the forum.
However the fun already stop before it began.
The phone will not connect to Odin.
It connects to the computer/kies just fine.
----------------------------------------------------------------------
I have :
Different comp/usb ports
Updated motherboard usb firmware/drivers
Different cables.
Different downloads for 4,3 and 4,4:
SM-N9005 (International Qualcomm): CF-Auto-Root-hlte-hltexx-smn9005.zip
(only works on 4.4 bootloaders, if you're still on 4.3 use the old version which you can find here: http://d-h.st/J32)
Turned on usb debugging.
Run as Admin ^^
Anyone else encountered these complications?
I would very much like a solution or suggestions to what I can try, even if you did not test it yourselves.
Thanks ! <3
marioantonion said:
Hello everyone.
Just received my Note 3 out of box and getting ready to root and try some of the great work available in this section of the forum.
However the fun already stop before it began.
The phone will not connect to Odin.
It connects to the computer/kies just fine.
----------------------------------------------------------------------
I have :
Different comp/usb ports
Updated motherboard usb firmware/drivers
Different cables.
Different downloads for 4,3 and 4,4:
SM-N9005 (International Qualcomm): CF-Auto-Root-hlte-hltexx-smn9005.zip
(only works on 4.4 bootloaders, if you're still on 4.3 use the old version which you can find here: http://d-h.st/J32)
Turned on usb debugging.
Run as Admin ^^
Anyone else encountered these complications?
I would very much like a solution or suggestions to what I can try, even if you did not test it yourselves.
Thanks ! <3
Click to expand...
Click to collapse
Have you uninstall kies and install samsung usb driver?
Maybe a dumb question, but did you put the phone in downloadmode before connecting to your pc?
Edit: make sure Kies is not running. Disable it also in the system tray on your pc.
And if that doesn't help, you can try another version of Odin, like Odin 3 v1.85 (?)
marioantonion said:
Hello everyone.
Just received my Note 3 out of box and getting ready to root and try some of the great work available in this section of the forum.
However the fun already stop before it began.
The phone will not connect to Odin.
It connects to the computer/kies just fine.
----------------------------------------------------------------------
I have :
Different comp/usb ports
Updated motherboard usb firmware/drivers
Different cables.
Different downloads for 4,3 and 4,4:
SM-N9005 (International Qualcomm): CF-Auto-Root-hlte-hltexx-smn9005.zip
(only works on 4.4 bootloaders, if you're still on 4.3 use the old version which you can find here: http://d-h.st/J32)
Turned on usb debugging.
Run as Admin ^^
Anyone else encountered these complications?
I would very much like a solution or suggestions to what I can try, even if you did not test it yourselves.
Thanks ! <3
Click to expand...
Click to collapse
Connect phone in download mode to USB before running Odin.
Worked.
Uninstalled kies
Installed standalone drivers.
So simple..
Cant always think of everything.
Thank you bro!

[Q] S3 Neo I9301I bricked !

Hello!
Model : I9301I ,Stock Firmware 4.4.2, rooted without cutom recovery.
This morning I tryed to flash TWRP recovery and I brieked my phone. Now when phone is connected to Computer i Device manger shows only Qualcomm HS-USB QLoader 9008(COM34). The phone does not boot in Download Mode nothing just black screen. I have Z3X box but I can't find model in Samsung Tool v18.2.
Odin can't view the phone, Z3X can't find the model. I made USB JIG but is not working with this model on other models is working.
Can you give me advice what to do ?
Try to remove battery for 5' and then start in download-mode again. Otherwise
not working
I have same problem
after update to 4.4.4 (india) my phone trun down
please help
If you cant enter to download and recovery it is hard brick. You have to buy USB JIG and unbrick it
i'm living in iran
can't find usb jig
can i make it?
please help i don't have time
http://forum.xda-developers.com/galaxy-s2/help/guide-how-to-make-usb-jig-reset-binary-t1604707
I have never tried this so you are on your own...GOOD LUCK!
MrSajjad said:
I have same problem
after update to 4.4.4 (india) my phone trun down
please help
Click to expand...
Click to collapse
There is no 4.4.4 for 9301....
same thing happened with me after flashing indian 4.4.4 into my i9300i now its not turning on
muntinlupa said:
http://forum.xda-developers.com/galaxy-s2/help/guide-how-to-make-usb-jig-reset-binary-t1604707
I have never tried this so you are on your own...GOOD LUCK!
Click to expand...
Click to collapse
Hi,
are u sure it's working fro I9300i?
soldon said:
There is no 4.4.4 for 9301....
Click to expand...
Click to collapse
sorry i have I9300i
usman_fareed said:
same thing happened with me after flashing indian 4.4.4 into my i9300i now its not turning on
Click to expand...
Click to collapse
my ex-rom was china with 18 MB update with phone
did you have china rom like me?
sorry I'm a new student in english
if i have problem tell me to know
MrSajjad said:
Hi,
are u sure it's working fro I9300i?
Click to expand...
Click to collapse
Of course I am not sure as I said I have not tried it. However since you have a brick phone then you can try anything. But the best thing is to bring it to a Samsung Service Center. Tell them you tried to update and this happened.
same problem
usman_fareed said:
same thing happened with me after flashing indian 4.4.4 into my i9300i now its not turning on
Click to expand...
Click to collapse
same problem
From the previous thread about GT-I9300I there is another version which was released for India. I suggest you check first if you have the Indian version using CPUz app before flashing/upgrading.
Read this if you have this Indian version then the update might not be for your phone.
thats the firmware i downloaded and it hard bricked my device
http://www.sammobile.com/firmwares/download/36608/I9300IDDUBNI1_I9300IODDBNI1_INS.zip/
muntinlupa said:
Of course I am not sure as I said I have not tried it. However since you have a brick phone then you can try anything. But the best thing is to bring it to a Samsung Service Center. Tell them you tried to update and this happened.
Click to expand...
Click to collapse
Usb jig doesn't work
usman_fareed said:
thats the firmware i downloaded and it hard bricked my device
http://www.sammobile.com/firmwares/download/36608/I9300IDDUBNI1_I9300IODDBNI1_INS.zip/
Click to expand...
Click to collapse
If I'm not mistaken, India has two models, one with 1.2 Ghz processor, and another with 1.4 GHz processor (please correct me if I'm wrong). If you are from India, just go to your device update section and check if the update is available via OTA.
Or just install Kies and try to update from it. Sammobile says the 4.4.4 for India is avaiable from Kies.
No need to flash anything via Odin if the 4.4.4 update is available for your country (except if you have previously installed another firmware). :good:
MrSajjad said:
Usb jig doesn't work
Click to expand...
Click to collapse
today again test usb jig
i hope it's working
can any i9300i user plz flash this file https://copy.com/1ggUuyIqHUrF it will create a debrick img
source http://forum.xda-developers.com/showthread.php?t=2439367
usman_fareed said:
can any i9300i user plz flash this file https://copy.com/1ggUuyIqHUrF it will create a debrick img
source http://forum.xda-developers.com/showthread.php?t=2439367
Click to expand...
Click to collapse
please i need this too
Usb jig doesn't work again
USB JIG not working! I Found solution here is the post

[HELP] Android L China V

I installed the test android lollipop on my s4 i9500, now i want to downgrade but i dont know how. i tried to install kitkat but its failing. its even not opening because of " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again " I cannot reinstall the china android L because the link expired what should i do ?
LeartK said:
I installed the test android lollipop on my s4 i9500, now i want to downgrade but i dont know how. i tried to install kitkat but its failing. its even not opening because of " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again " I cannot reinstall the china android L because the link expired what should i do ?
Click to expand...
Click to collapse
Flash other android L for i9500 via ODIN -> India or Russia -> HERE.
I just tried it. It says fail. on odin. Anyone help ?
LeartK said:
I just tried it. It says fail. on odin. Anyone help ?
Click to expand...
Click to collapse
We are helping you. Add some screenshots for see the error of ODIN when you try to flash the firmware.
LeartK said:
I just tried it. It says fail. on odin. Anyone help ?
Click to expand...
Click to collapse
you sure you have your Drivers installed correctly?

serious problem HELP NEEDED for galaxy tab4 SM-T533

Hi everyone
I have a galaxy tab4 SM-T533, I tried to update via smart switch but after update my tab dead. No power, no display, no download mode and no recovery mode. And does not detected by pc also.
I tried 301k resistor jig method but no help.
I think my tab is hard bricked :crying::crying::crying:
Is there any chance to unbrick my tab?
Dear experiensed experts please help me. I really want my tab back.
Before update my tab was running XXU1AOD3 stock rom kitkat 4.4 and rooted.
PLEASE HELP!!
Same problem
ajeeva said:
Hi everyone
I have a galaxy tab4 SM-T533, I tried to update via smart switch but after update my tab dead. No power, no display, no download mode and no recovery mode. And does not detected by pc also.
I tried 301k resistor jig method but no help.
I think my tab is hard bricked :crying::crying::crying:
Is there any chance to unbrick my tab?
Dear experiensed experts please help me. I really want my tab back.
Before update my tab was running XXU1AOD3 stock rom kitkat 4.4 and rooted.
PLEASE HELP!!
Click to expand...
Click to collapse
casahuga said:
Same problem
Click to expand...
Click to collapse
Hi, when u connect the device to PC go to device manager does it show you device or android ?
enzo2001 said:
Hi, when u connect the device to PC go to device manager does it show you device or android ?
Click to expand...
Click to collapse
No
casahuga said:
No
Click to expand...
Click to collapse
Try installling samsung driver from here : https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows and connect ur tab to pc see if it works or not

Categories

Resources