I do not have any back ups because i backed up on clockwork and i now have twrp. I have 3 roms on my phone but 2 say failed and aokp just puts me in bootloop. I cant do anything .please help. Thank you!
So nobody can help or what???????
kkurtz78 said:
I do not have any back ups because i backed up on clockwork and i now have twrp. I have 3 roms on my phone but 2 say failed and aokp just puts me in bootloop. I cant do anything .please help. Thank you!
Click to expand...
Click to collapse
Have you try to do a full wipe? In any case, yoy can download other rom that works sure and put in the sdcard using adb when you are in recovery mode...
Check if when you flash the rom, you are getting an error related with loky-... (Something like this)...
Why don't you try to install back cwm if you still have your cwm backup. Then after that restore your backup.
Sent from my LG-D802 using Tapatalk
mrm43 said:
Why don't you try to install back cwm if you still have your cwm backup. Then after that restore your backup.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
How can i install back to CWM? if i cant get out of Recovery?? I would just download another rom but computer wont show my phone since stuck in recovery, As you can tell i have limited access to computer privileges due to using a work computer, so I do not have any of the tools on the computer.
lomunet said:
Have you try to do a full wipe? In any case, yoy can download other rom that works sure and put in the sdcard using adb when you are in recovery mode...
Check if when you flash the rom, you are getting an error related with loky-... (Something like this)...
Click to expand...
Click to collapse
Yes i did a full wipe, when i flash AOKP 2/16 its successful but stays boot looping, but PA and CM11 says failed, but nothing mentioning loki.
Can you not mount in twrp? Or go into download mode and adb push another ROM onto the phone? If your in a bootloop just wipe everything twice. Mount or adb push a new ROM AFTER checking md5. Both those have worked for me :$
Sent from my Rezound using xda-developers app. CyanogenMod 11. S-off
Is your TWRP out of date? You can update TWRP while in TWRP. Or just adp sideload another ROM.
How do you update twrp while in recovery? When flashing the other two roms its saying something about binary?? And how do you side load, yes im real new to the g2 root game, my nexus's were so much easier and never delt with adb sdk really, ill have more luck tomorrow when im on computer i can actually download stuff , when i flash aokp i see all the files through file manager but just won't boot
kkurtz78 said:
How can i install back to CWM? if i cant get out of Recovery?? I would just download another rom but computer wont show my phone since stuck in recovery, As you can tell i have limited access to computer privileges due to using a work computer, so I do not have any of the tools on the computer.
Click to expand...
Click to collapse
By using ADB. If your pc does not detect phone. Try installing lg drivers or those on pdanet drivers.
Link for universal drivers to get ADB working.
http://koush.com/post/universal-adb-driver
Sent from my LG-D802 using Tapatalk
Adb is the way to go if your stuck in recovery. And even if you're a newb its easy to learn as there are countless tutorials out there. Just read up on it and then you can either push a new ROM or push cwm and restore your old backup
Sent from my LG-G2 using Tapatalk
Related
Didn't think bricking was possible but I can't seem to get out of CWM. I was running the honeycomb revolver rom and decided to download ota rootkeeper and then revolver parts. After downloading those apps, revolver parts asked to reboot into recovery to flash the updated zip. Did that and I've been stuck in CWM ever since. I even tried factory resetting. It does the reset but then stays at CWM screen. Won't let me boot out of it. Does anyone know what I should do? I can't even power down the device so basically it's sitting at the CWM screen all the time. Ughhhh. Any help would be greatly appreciated.
Sent from my PG86100 using Tapatalk
if you have cwm 5504 , take a look here:
http://forum.xda-developers.com/showthread.php?t=1530337
I am on CWM 5504 but can't seem to access your link. (at least not via Tapatalk app) will take a look later thanks.
Sent from my PG86100 using Tapatalk
ok , its a cwm 5504 known problem , easy solution , dont worry
the thread is : Troubleshooting/Solved] ClockworkMod recovery 5.5.0.4 from Koush
Have you tried cold booting into the OS? Power it on using volume down and power button. As soon as you see the white text just release both buttons and it should attempt a cold boot into the OS. This would let you know if you're still able to access the OS or not.
The above referenced post has all the info you'll need to fix your problem. It'll just be easier to fix if you still have access to the OS.
jinwu57 said:
Didn't think bricking was possible but I can't seem to get out of CWM. I was running the honeycomb revolver rom and decided to download ota rootkeeper and then revolver parts. After downloading those apps, revolver parts asked to reboot into recovery to flash the updated zip. Did that and I've been stuck in CWM ever since. I even tried factory resetting. It does the reset but then stays at CWM screen. Won't let me boot out of it. Does anyone know what I should do? I can't even power down the device so basically it's sitting at the CWM screen all the time. Ughhhh. Any help would be greatly appreciated.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Yeah...just go back to Rogue CWM. If all you do is flash Roms like most here on xda ...its all you need. Plus it got external SD mode.
SiNJiN76 said:
Yeah...just go back to Rogue CWM. If all you do is flash Roms like most here on xda ...its all you need. Plus it got external SD mode.
Click to expand...
Click to collapse
All i do is flash roms and don't really understand all the elements of ADB. What is Rogue CWM? From what I read, it seems like I have to use ADB to push either a new rom or a new version of CWM to my device?
jinwu57 said:
All i do is flash roms and don't really understand all the elements of ADB. What is Rogue CWM? From what I read, it seems like I have to use ADB to push either a new rom or a new version of CWM to my device?
Click to expand...
Click to collapse
Team Rouge CWM is a different version of CWM. It's a version that will read from both the internal sd as well as the external micro sd card.
Under normal circumstance you can simply flash a different version of recovery but if you're in a recovery bootloop because of the Koush's CWM 5.5.0.4 version. You'll have to follow partio's link to solve the problems.
Now if you can cold boot into the OS, you can move all the necessary files there without the need of ADB. (Just hook TF up to PC and drag/drop files to internal sd.
If you can't get out of CWM recovery you'll need ADB to push the files to to internal sd.
jinwu57 said:
All i do is flash roms and don't really understand all the elements of ADB. What is Rogue CWM? From what I read, it seems like I have to use ADB to push either a new rom or a new version of CWM to my device?
Click to expand...
Click to collapse
Rogue cwm is just a modified version of cwm. It gets rid of the 100 no options to confirm a flash....and has flash from external SD.
Good luck in getting out of the 5.5.0.4...
I tried cold booting...no go. I guess I'll have to try the ADB method. Thanks for the understanding of recoveries. I have a co worker who is going to try and help me with ADB since i've never used it.
*How will my PC know that I've plugged my tf in, if Im stuck in the recovery mode?(i guess this is probably ADB basics =/)
This is a good thread for setting up ADB.
http://forum.xda-developers.com/showthread.php?t=1071584
ADB required USB debugging to be turn on.
Not sure how one would go about turning that on if you can't get into settings.
IIRC you should be able to get into adb through recovery. I'll have to boot into recovery to remember the way, but I am fairly certain it is possible. Maybe through Advanced->Mounts and Storage?
I FINALLY DID IT!! Cold boot way!!
Hi,
It seems that I have CWM and recovery installed on my Nexus 4. I was on TWRP previously and switched to CWM, now it seems that it is stucked.
I erased recovery in command prompt and flash it with CWM after installing stock ROM but ROM Manager still detected TWRP. How do I get rid of TWRP?
Zouk18 said:
Hi,
It seems that I have CWM and recovery installed on my Nexus 4. I was on TWRP previously and switched to CWM, now it seems that it is stucked.
I erased recovery in command prompt and flash it with CWM after installing stock ROM but ROM Manager still detected TWRP. How do I get rid of TWRP?
Click to expand...
Click to collapse
try flashing stock recovery via adb
If you reboot into recovery does CWM come up or TWRP? If it's CWM then ignore ROM Manager and continue as normal
ijustzeke said:
try flashing stock recovery via adb
Click to expand...
Click to collapse
So you are suggesting that I erase and flash to stock recovery via adb and then flash custom recovery again?
EddyOS said:
If you reboot into recovery does CWM come up or TWRP? If it's CWM then ignore ROM Manager and continue as normal
Click to expand...
Click to collapse
CWM comes up as the recovery because it's the latest one I flash. I know it might now matter but this really bugs me.
Dunno why you're using ROM Manager anyway, pointless piece of software IMO. Just flash everything manually
Mine was gone when i unrooting the device
Sent from my Nexus 4
EddyOS said:
Dunno why you're using ROM Manager anyway, pointless piece of software IMO. Just flash everything manually
Click to expand...
Click to collapse
I was just checking out the app, don't really use it. That was when I saw two recoveries. I erased and flashed everything via adb previously. Just really wanna know the cause and how to get rid of it.
curtzxion said:
Mine was gone when i unrooting the device
Sent from my Nexus 4
Click to expand...
Click to collapse
Is there a way just to unroot but keep my ROM, kernel and data intact?
Zouk18 said:
I was just checking out the app, don't really use it. That was when I saw two recoveries. I erased and flashed everything via adb previously. Just really wanna know the cause and how to get rid of it.
Is there a way just to unroot but keep my ROM, kernel and data intact?
Click to expand...
Click to collapse
My rom, kernel, and data doesn't change, when i was unrooting the device(as i remember)
Sent from my Nexus 4
That's normal. I have it too. Just choose cwm on recovery already installed and leave it like that.
Sent from my Nexus 4 using xda premium
Hi All
I am in the process of flashing Cyanogenmod 11 onto my TF300T however I am in a world of hurt. First I updated to the latest TWRP (2.6.3 -4.2). When i boot up into TWRP it is asking me for a password which I do not know. If I press Cancel i cannot see any contents of /sdcard. Also if I insert a microSD card, again cannot see any contents. TWRP is telling me there is no operating system installed and if i reboot it just comes straight back into TWRP.
I apologise if this question has already been asked but I just cant figure this one out.
What bootloader version do you have? What helped me was to reboot into the boot loader (using volume down+power, has three options RCK, cold-boot linux, Wipe data [dont ever ever ever wipe data]) and select cold-boot linux (the android guy in the middle) and it would boot back into my ROM. If you cant get in that way, you are going to have to use ADB on your computer and use the "adb reboot-fastboot" command. If you get in, back up your files, because you're at the event horizon of losing all your data. If your bootloader is 10.6.1.8 youre going to need to flash the latest asus stock firmware from their website.
Sent from my TF300T using XDA Premium 4 mobile app
Lyshco said:
Hi All
I am in the process of flashing Cyanogenmod 11 onto my TF300T however I am in a world of hurt. First I updated to the latest TWRP (2.6.3 -4.2). When i boot up into TWRP it is asking me for a password which I do not know. If I press Cancel i cannot see any contents of /sdcard. Also if I insert a microSD card, again cannot see any contents. TWRP is telling me there is no operating system installed and if i reboot it just comes straight back into TWRP.
I apologise if this question has already been asked but I just cant figure this one out.
Click to expand...
Click to collapse
u should back to twrp 2.5, or u should use scanno twrp.
Tunameltsalad said:
What bootloader version do you have? What helped me was to reboot into the boot loader (using volume down+power, has three options RCK, cold-boot linux, Wipe data [dont ever ever ever wipe data]) and select cold-boot linux (the android guy in the middle) and it would boot back into my ROM. If you cant get in that way, you are going to have to use ADB on your computer and use the "adb reboot-fastboot" command. If you get in, back up your files, because you're at the event horizon of losing all your data. If your bootloader is 10.6.1.8 youre going to need to flash the latest asus stock firmware from their website.
Sent from my TF300T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I am using bootloader 10.6.1.3. When I cold boot linux it just continually boots up into TWRP.
Whenever I try to run an ADB command i get "error: device not found". I have installed the android SDK, tried to install the USB drivers but no luck (possible windows 8 issue?).
It doesnt matter if I lose all data on it, i dont keep anything really important on it.
I have rolled back to 2.5.0 TWRP and it still asks me for a password.
I've switched over to my Mac now and have been able to push the CM-11 ROM into the sdcard directory. However when I attempt to flash it, it fails immediately with the log saying.
E:Unable to mount '/system'
E:Unable to mount '/cache'
Lyshco said:
I've switched over to my Mac now and have been able to push the CM-11 ROM into the sdcard directory. However when I attempt to flash it, it fails immediately with the log saying.
E:Unable to mount '/system'
E:Unable to mount '/cache'
Click to expand...
Click to collapse
I had something similar, tried many things but nothing worked so i ended up flashing stock ROM again with fastboot.
If you need help on how to do that just let me know.
rtfm
and more serious:
cm11=android4.4=new PITs(like with 4.1 to 4.2)
solution:
flash scsnnos twrp 2.6.3.0 from his omni thread and it works.
cheers
buster
Sent from my GT-I9505 using XDA Premium 4 mobile app
screeny added
Sent from my TF300T using XDA Premium 4 mobile app
Buster99 said:
rtfm
and more serious:
cm11=android4.4=new PITs(like with 4.1 to 4.2)
solution:
flash scsnnos twrp 2.6.3.0 from his omni thread and it works.
cheers
buster
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok this morning I have tried the following:
1. Flashed Scanno's TWRP from the OMNI thread using this command:
> fastboot -i 0x0B05 flash recovery recovery.img
2. Booted up into TWRP, again /sdcard is empty.
3. Pushed the OMNI ROM onto /sdcard using:
> adb push omni-4.4.2-20131218-tf300t-HOMEMADE.zip /sdcard/
4. Went to Install and selected the zip then it immediately fails saying:
Unable to mount '/system'
Am I missing something here? From above i see that i flash 'recovery'. Do I need to flash 'system' with fastboot?
no, but maybe your PITs are corrupt. do you still have an older nandroid backup you could try to restore first?
oh just read that twrp asks for password. is that still the case?
Sent from my GT-I9505 using XDA Premium 4 mobile app
Yep it's still asking me for a password.
What are PITs?
I'm not sure if I have a backup. When in TWRP if I go to restore it can't find any. It's like the whole tablet is wiped. Does this have something to do with not having the ability to mount anything?
Sent from my HTC_PN071 using Tapatalk
Ok, Buster99 I followed your instructions over at this thread and am now back up and running with stock.
http://forum.xda-developers.com/showpost.php?p=44244313&nocache=1&z=9056634965818376
For me to go to KitKat, can I just flash the OMNI ROM now?
EDIT: Nevermind, I am all back up and running, thanks so much for the help, i was getting a bit worried that I had bricked it!
HELP
So I just tried getting cm11 on my tf300t, i installed TWRP 2.5 and rooted my device, everything went well. I then did a factory reset and wiped cashe. I tried installing then cm11 zip file with no success. I get the message that it failed. And now im on a device with no ROM to boot into and no working ROM to flash on the device.
Since there is a SD card slot on the device, would it be possible to put another ROM on there and then flashing that?
Please help me!
ollemolle said:
So I just tried getting cm11 on my tf300t, i installed TWRP 2.5 and rooted my device, everything went well. I then did a factory reset and wiped cashe. I tried installing then cm11 zip file with no success. I get the message that it failed. And now im on a device with no ROM to boot into and no working ROM to flash on the device.
Since there is a SD card slot on the device, would it be possible to put another ROM on there and then flashing that?
Please help me!
Click to expand...
Click to collapse
in order to install CM11, you need a special TWRP modded for KK: http://forum.xda-developers.com/showpost.php?p=48508679&postcount=7
You can copy a CM11 nightly and the TWRP onto a SD card and flash from there, or use fastboot.
cmendonc2 said:
in order to install CM11, you need a special TWRP modded for KK: http://forum.xda-developers.com/showpost.php?p=48508679&postcount=7
You can copy a CM11 nightly and the TWRP onto a SD card and flash from there, or use fastboot.
Click to expand...
Click to collapse
Hello, i have a similar problem, i wanted to install CM11 on my TF300T, i downloaded the latest version of TWRP from their site for the tablet, installed via Fastboot and everything seems to be ok, when i try to flash it (via CM OTA) it ask me for the password and it didn´t mount any data, but when i reboot the tablet it just keep loading twrp and i can't get to fastboot nor adb nor APX, so i have no idea on how to restore or boot back to the OS, or i just bricked the device?
thanks
josush said:
Hello, i have a similar problem, i wanted to install CM11 on my TF300T, i downloaded the latest version of TWRP from their site for the tablet, installed via Fastboot and everything seems to be ok, when i try to flash it (via CM OTA) it ask me for the password and it didn´t mount any data, but when i reboot the tablet it just keep loading twrp and i can't get to fastboot nor adb nor APX, so i have no idea on how to restore or boot back to the OS, or i just bricked the device?
thanks
Click to expand...
Click to collapse
What stock bootloader are you on?
cmendonc2 said:
What stock bootloader are you on?
Click to expand...
Click to collapse
i'm not really sure about the number but it was the latest one from ASUS, i was on the official 4.2.1 ROM when i moved to CM10 a few months ago
josush said:
i'm not really sure about the number but it was the latest one from ASUS, i was on the official 4.2.1 ROM when i moved to CM10 a few months ago
Click to expand...
Click to collapse
When you restart you tablet, and hold the vol down key while rebooting it will give you a bootloader number: 10.6.x.x.x
cmendonc2 said:
When you restart you tablet, and hold the vol down key while rebooting it will give you a bootloader number: 10.6.x.x.x
Click to expand...
Click to collapse
that's the point, it doesn't do anything, is like i'm not holding or pressing it, it just show the ASUS Logo screen and in the top left it says that the bootloader is unlocked as usual, i don't think is a wardware problem because it was working the last time it booted on Android
josush said:
that's the point, it doesn't do anything, is like i'm not holding or pressing it, it just show the ASUS Logo screen and in the top left it says that the bootloader is unlocked as usual, i don't think is a wardware problem because it was working the last time it booted on Android
Click to expand...
Click to collapse
Once it goes to recovery, adb will be accessible. Then follow Buster's recovery method.
Hello everyone. I am desperately in need of your help! I installed the most recent version of Paranoid Android 4.4. Everything worked great. I then decided I wanted a smaller nav bar and found a flashable zip file for Kit Kat that was meant to reduce the nav bar size. I flashed it but now I am stuck in a boot loop. I am unable to get to TWRP but can get into download mode. I tried using FlashTool to flash the stock ROM but it keeps getting stuck at 49%. I don't mind if I lose all my data, I just want to get things up and running again! What should I do? Thank you.
McFinkle said:
Hello everyone. I am desperately in need of your help! I installed the most recent version of Paranoid Android 4.4. Everything worked great. I then decided I wanted a smaller nav bar and found a flashable zip file for Kit Kat that was meant to reduce the nav bar size. I flashed it but now I am stuck in a boot loop. I am unable to get to TWRP but can get into download mode. I tried using FlashTool to flash the stock ROM but it keeps getting stuck at 49%. I don't mind if I lose all my data, I just want to get things up and running again! What should I do? Thank you.
Click to expand...
Click to collapse
The reason the flashtools is failing at 49% is because you are on a non stock rom, therefore you need to wipe the phone before flashing to stock (ive had the same problem before), but because you cant get into recovery, im not sure how you will wipe your device
McFinkle said:
Hello everyone. I am desperately in need of your help! I installed the most recent version of Paranoid Android 4.4. Everything worked great. I then decided I wanted a smaller nav bar and found a flashable zip file for Kit Kat that was meant to reduce the nav bar size. I flashed it but now I am stuck in a boot loop. I am unable to get to TWRP but can get into download mode. I tried using FlashTool to flash the stock ROM but it keeps getting stuck at 49%. I don't mind if I lose all my data, I just want to get things up and running again! What should I do? Thank you.
Click to expand...
Click to collapse
same her I have same , thanks
Okay, I managed to get into TWRP. I don't have a recovery or a rom to flash on the phone though. I tried using fastboot to push a rom to the phone but I keep getting "error: device not found". Any ideas?
McFinkle said:
Okay, I managed to get into TWRP. I don't have a recovery or a rom to flash on the phone though. I tried using fastboot to push a rom to the phone but I keep getting "error: device not found". Any ideas?
Click to expand...
Click to collapse
how did you get into twrp can you tell me as still stuck
McFinkle said:
Okay, I managed to get into TWRP. I don't have a recovery or a rom to flash on the phone though. I tried using fastboot to push a rom to the phone but I keep getting "error: device not found". Any ideas?
Click to expand...
Click to collapse
Adb sideload
Sent from my LG-G2 using Tapatalk
Lord Kelly said:
how did you get into twrp can you tell me as still stuck
Click to expand...
Click to collapse
Once you get into download mode, hold the buttons to get into recovery.
To get into recover
Try holding volume down + power*
Immediately when LG appears let go of both and ONLY hold onto power, should boot into option to factory reset*
Hit power button 3 times to continue, then itll load into recovery
Sent from my LG-VS980 using xda app-developers app
darkobas said:
Adb sideload
Sent from my LG-G2 using Tapatalk
Click to expand...
Click to collapse
I just tried this and still get the error device not found. In TWRP do I have to do anything else besides swiping to get into ADB sideload?
Thanks
Anybody? I just got this phone.. I don't want it to be bricked
Install drivers from lg website or pda.net drivers
Sent from my LG-G2 using Tapatalk
If you cant get a rom sideloaded, Now that you can get into TWRP, wipe EVERYTHING and then flash back to stock, it should work.
MalignantQuechnitlan said:
If you cant get a rom sideloaded, Now that you can get into TWRP, wipe EVERYTHING and then flash back to stock, it should work.
Click to expand...
Click to collapse
By wipe everything do you mean format wipe or advanced wipe? And how will I get the stock rom onto the phone to flash it?
Thanks
McFinkle said:
By wipe everything do you mean format wipe or advanced wipe? And how will I get the stock rom onto the phone to flash it?
Thanks
Click to expand...
Click to collapse
I mean wipe data, system and cache (internal storage aswell if you want) and you flash the stock rom via the flashtool and a pc, it doesn't need to be in your devices storage.
Sent from my LG-D802 using Tapatalk
good morning everybody,
I am a D802 user, and I have rooted it, installed TWRP last build and wanted to install the slimkat ROM
but, I don't know why, but first I didn't perform a backup, and secondly instead of performing the system wipe, I,ve been in advanced mode and decided to wipe the internal data :silly:
and of course, now I can,t find my zip file for the nex ROM, and when I reboot I am blocked on LG logo screen, I can enter in recovery or download mode, that's all !!!
is there any other solution that flashing the stock ROM (.kdz) to solve my problem ??
many thx !!
G. :good:
geobart said:
good morning everybody,
I am a D802 user, and I have rooted it, installed TWRP last build and wanted to install the slimkat ROM
but, I don't know why, but first I didn't perform a backup, and secondly instead of performing the system wipe, I,ve been in advanced mode and decided to wipe the internal data :silly:
and of course, now I can,t find my zip file for the nex ROM, and when I reboot I am blocked on LG logo screen, I can enter in recovery or download mode, that's all !!!
is there any other solution that flashing the stock ROM (.kdz) to solve my problem ??
many thx !!
G. :good:
Click to expand...
Click to collapse
Have you tried connecting thru usb to computer and then mount sd card and transfer a zip then?
Sent from my LG-D801 using Tapatalk
Just do adb sideload
Sent from my LG-G2 using Tapatalk
/rawda : when I put USB cable, nothing happens on my computer !!! so what should I do to mount SD card ?
/darkobas : what do you mean with "do adb sideload" ? i need to be connected with USB, because I thought I try this menu but nothing change, but maybe I forgott something !
many thx guys
geobart said:
/rawda : when I put USB cable, nothing happens on my computer !!! so what should I do to mount SD card ?
/darkobas : what do you mean with "do adb sideload" ? i need to be connected with USB, because I thought I try this menu but nothing change, but maybe I forgott something !
many thx guys
Click to expand...
Click to collapse
Can you boot into recovery? Or download mode?
RubbleTea said:
Can you boot into recovery? Or download mode?
Click to expand...
Click to collapse
Yes, I can boot in both mode recovery and download, that's the only thing I can do at this time !!!!! :laugh:
geobart said:
Yes, I can boot in both mode recovery and download, that's the only thing I can do at this time !!!!! :laugh:
Click to expand...
Click to collapse
Cool, so if you install adb onto your PC and set it up you can sideload a ROM to your recovery....and if you want you can flash stock in download mode with thread in general forum....I'm hitting the sack but if you look up adb sideload you should be able to get all the instructions
---------- Post added at 01:48 AM ---------- Previous post was at 01:46 AM ----------
Basically once you have adb setup and have a ROM ready its a piece of cake and lots of threads if you Google it
I think I will have a problem with ADB, because before flashing I disable the USB debugging mode !!!! and unfortunatly I can't enable it !! Am I true ???
geobart said:
I think I will have a problem with ADB, because before flashing I disable the USB debugging mode !!!! and unfortunatly I can't enable it !! Am I true ???
Click to expand...
Click to collapse
No youll still ne able to do it in recovery
Sent from my LG-D801 using Tapatalk
look into your recovery settings, it should have an adb option you can togle, otherwise let it go in booting loop.
navigate to the folder with the files you rooted with. There should be a adb file.
then shift rightclick if windows on that folder that contains that stuff. Select command prompt from here.
adb devices,
or adb it will or should list the phone, then find the codes to push the desired rom and optional apps to root\sdcard.
then adb reboot recovery, or reboot manually into recovery and flash your rom plus optional gapps
Sent from my LG-D802 using xda app-developers app
adb didn't work, can't recognize my device with qdb devices command !!
anyway, I flash the stock rom in Download mode and then root, TWRP and custom Rom and everything is good now !!
thx for all
darkobas said:
Just do adb sideload
Sent from my LG-G2 using Tapatalk
Click to expand...
Click to collapse
hi , if you can help me please help !!
i have rooted my g2 and installed twrp recovery
then i tried to flash cm 11
it started flashing then it says "fail"
i tried to reboot my phone
it get stuck on lg screen
then someone fixed it for me
i tried to flash PA rom it failed what i can do to flash the rom on my phone
majdifa said:
hi , if you can help me please help !!
i have rooted my g2 and installed twrp recovery
then i tried to flash cm 11
it started flashing then it says "fail"
i tried to reboot my phone
it get stuck on lg screen
then someone fixed it for me
i tried to flash PA rom it failed what i can do to flash the rom on my phone
Click to expand...
Click to collapse
Im guessing your recovery is 2.6.3.2 you need twrp 2.6.3.3 to flash cm11
Sent from my LG-LS980 using xda premium
mchlbenner said:
Im guessing your recovery is 2.6.3.2 you need twrp 2.6.3.3 to flash cm11
Sent from my LG-LS980 using xda premium
Click to expand...
Click to collapse
Thank you a lot
But I've got another problem,
I Installed TWRP 2.6.3.3
Then I downloaded CM 11 and g apps
Then I rebooted my phone into recovery
I have made back up
And then i wiped dalvik cache and cache
Then i have flashed CM 11 and google apps there was no "fails" or errors
But when installing the zip finished
I rebooted my phone the phone get stuck on CM logo ??
majdifa said:
Thank you a lot
But I've got another problem,
I Installed TWRP 2.6.3.3
Then I downloaded CM 11 and g apps
Then I rebooted my phone into recovery
I have made back up
And then i wiped dalvik cache and cache
Then i have flashed CM 11 and google apps there was no "fails" or errors
But when installing the zip finished
I rebooted my phone the phone get stuck on CM logo ??
Click to expand...
Click to collapse
Whipe system data and data then reboot.
Dont ever whipe internal data.
Sent from my LG-LS980 using xda premium