Related
Hi all!!
I have a huge problem i think.
Yesterday is was rooting my device, and i was about to start flashing a custom rom.
What happened is that in the proces of wiping dalvik cache etc. I by accident wiped the whole system!
So now if i want to reboot, recovery gives the error that there is no OS is installed. If i reboot my nexus 7 keeps hanging in the startup screen wich only displays Google...
It still can reboot in recovery or bootloader, but i cant figure out how to recover. I tried with 2 toolkits, but no succes! I made a nandroid backup but this doesnt work either.
Also i tried several solutions but none of them helped.
Does someone know how i can get my N7 to work again?? :crying:
Wugfresh's toolkit allows you to flash the stock image from the bootloader. Just make sure you check the box that states you cantvpower the device up.
Mskips toolkit, chose the option to flash Google image, it will download, and flash for you, if not your doing it wrong, push comes to shove your going o have to download a custom ROM and use adb to to push it on to your nexus 7 then fire up cwm and lash the rom, your nandroid will be gone unless you took it off/copied to a PC before you messed up.
Sent from my Nexus 7 using Tapatalk 2
Jordanooo said:
Wugfresh's toolkit allows you to flash the stock image from the bootloader. Just make sure you check the box that states you cantvpower the device up.
Click to expand...
Click to collapse
This^ i have done it a few times. When i flash a new rom i wipe all including system. Sometimes i get a bad download and i dont realise until i try to flash. Do as poster above says and you will be ok
Sent from my Nexus 7 using Tapatalk 2
leelaa said:
This^ i have done it a few times. When i flash a new rom i wipe all including system. Sometimes i get a bad download and i dont realise until i try to flash. Do as poster above says and you will be ok
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I tried all those things named above with both toolkits..
When i try to flash to stock it keeps hanging at some point, or i get errors. What am i doing wrong?
I will try again what jordaanooo mentioned.. hope this time it will work.
If it doesn't work, does it help to post some screenshots with the error i get, or where it gets stuck??
Yeah, try it, make sure you state you cant boot it, and tell us what parts it stops/fails at
SMH dont use toolkits -_- so you're saying you "could" get into recovery? Why didnt you just adb push a rom
Code:
adb push name-of-rom.zip /data/media
Then flash that rom?
ÜBER™ said:
SMH dont use toolkits -_- so you're saying you "could" get into recovery? Why didnt you just adb push a rom
Code:
adb push name-of-rom.zip /data/media
Then flash that rom?
Click to expand...
Click to collapse
Yes recovery does work. How do i push that? i have never done that...
TouchHD said:
Yes recovery does work. How do i push that? i have never done that...
Click to expand...
Click to collapse
he just mentioned it in the post. do you know how to use adb? do you have it installed?
Fufu_the_Great said:
he just mentioned it in the post. do you know how to use adb? do you have it installed?
Click to expand...
Click to collapse
i used it before for rooting my htc one x, so i think i have the needed files. but i don't know what i need for the n7 and how to start. I have been searching, but can't figure it out..
Jordanooo said:
Wugfresh's toolkit allows you to flash the stock image from the bootloader. Just make sure you check the box that states you cantvpower the device up.
Click to expand...
Click to collapse
done something like this yesterday,worked :good:
TouchHD said:
i used it before for rooting my htc one x, so i think i have the needed files. but i don't know what i need for the n7 and how to start. I have been searching, but can't figure it out..
Click to expand...
Click to collapse
pretty simple. if you know how to use adb then you just need to just a ROM to apply. wether it be the stock or a custom. once you know what ROM, the easiest thing is to paste it into your adb folder (usually platform-tools) and just push it onto your sd card
Fufu_the_Great said:
pretty simple. if you know how to use adb then you just need to just a ROM to apply. wether it be the stock or a custom. once you know what ROM, the easiest thing is to paste it into your adb folder (usually platform-tools) and just push it onto your sd card
Click to expand...
Click to collapse
Thanks will try that this evening when i get home!
Jordanooo said:
Yeah, try it, make sure you state you cant boot it, and tell us what parts it stops/fails at
Click to expand...
Click to collapse
I'm trying to flash to a stock rom at the moment with the wugfresh toolkit. it seems the process is stuck at the point where it is "sending 'system' to the device. it's "sending 'system'" for more than an hour now... is that ok?? or is there something going wrong?
the picture show's where it gets stucked
Fastboot flash bootloader bootloader-grouper3.34.img
Fastboot flash all nakasijroo3d.IMG w/e its called
Do you have cwm or twrp installed? If so you can mount the 7 like a mass storage device to your computer. This will give you access to the SD card where you can transfer a ROM from your computer to your tablet....I'm not sued where the setting is.....just go into your recovery and dig around....I think its under advanced...
Sent from my Galaxy Nexus using xda premium
---------- Post added at 03:00 PM ---------- Previous post was at 02:54 PM ----------
I just checked...if u go under the mount setting. There's a USB mass storage option......def the easiest route....adb is easy ...if you know how to set it up right
Sent from my Galaxy Nexus using xda premium
TouchHD said:
I'm trying to flash to a stock rom at the moment with the wugfresh toolkit. it seems the process is stuck at the point where it is "sending 'system' to the device. it's "sending 'system'" for more than an hour now... is that ok?? or is there something going wrong?
the picture show's where it gets stucked
Click to expand...
Click to collapse
are you familiar/comfortable with the command prompt?
Fufu_the_Great said:
are you familiar/comfortable with the command prompt?
Click to expand...
Click to collapse
no not really.. i'm a real noob with that.
TouchHD said:
no not really.. i'm a real noob with that.
Click to expand...
Click to collapse
do you remember where you installed android sdk?
Fufu_the_Great said:
do you remember where you installed android sdk?
Click to expand...
Click to collapse
Yes i do. C:\SDK
Hey everybody,
Yesterday I tried flashing a theme to SmoothRom and got caught in a bootloop. In a panic, I accidentally factory wiped my sd card and lost my roms so now I can't flash another rom to my Nexus 7. I've tried adb pushing a rom to the sd card, but my Nexus 7 is not being recognized in adb devices. I've tried everything to my knowledge but I still cannot get anything to work, even tried working on Mac and PC computers and my Nexus won't show up in adb.
I'm ready to count my losses as it is my fault, but I figured you guys could help out. I love my Nexus so if you guys know anything I could do I'd greatly appreciate it. Thanks.
Re: Unbrick Nexus 7?
tjonestmj137 said:
Hey everybody,
Yesterday I tried flashing a theme to SmoothRom and got caught in a bootloop. In a panic, I accidentally factory wiped my sd card and lost my roms so now I can't flash another rom to my Nexus 7. I've tried adb pushing a rom to the sd card, but my Nexus 7 is not being recognized in adb devices. I've tried everything to my knowledge but I still cannot get anything to work, even tried working on Mac and PC computers and my Nexus won't show up in adb.
I'm ready to count my losses as it is my fault, but I figured you guys could help out. I love my Nexus so if you guys know anything I could do I'd greatly appreciate it. Thanks.
Click to expand...
Click to collapse
Do you still have access to recovery? What about fastboot? What version of android were you on?
Sent from my Nexus 7 using xda premium
Re: Unbrick Nexus 7?
This worked for me: http://blog.dantup.com/2012/10/fixing-adb-device-not-found-with-nexus-7-in-recovery-mode
heavy_metal_man said:
Do you still have access to recovery? What about fastboot? What version of android were you on?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Yeah I can still get into fastboot & recovery (Clockwork mod touch). I've tried mounting the sd card in recovery but nothing happens. Tried doing adb to sideload a rom but my device is showing up.
Nico_60 said:
This worked for me: ]
Click to expand...
Click to collapse
I saw this while googling some stuff gonna try it out thanks.
tjonestmj137 said:
I saw this while googling some stuff gonna try it out thanks.
Click to expand...
Click to collapse
https://developers.google.com/android/nexus/images flash the one for your device (You will need to use fastboot)
Re: Unbrick Nexus 7?
You can go two ways here, either you can do as the above user posted and flash a stock image via fastboot or if you have a otg cable and a pendrive/removable media you can use that to install the rom
Sent from my Nexus 7 using xda premium
Ok guys, I spent all last night trying to get this to work, and I'm still having problems. I tried adding the line to the driver inf file but nothing worked. I tried adding the PDANet drivers, but the Nexus of course is not showing up. I know that my Nexus is not doomed it's just something I'm not doing right, not gonna give up I'll keep at it. Thanks for the help guys, if anything have any suggestions let me know!
Sounds like you should find out if CWM touch can mount a USB flash thumbdrive via an OTG cable. You can avoid driver problems that way (as long as it works). The filesystem formatting of the USB drive with the highest probability of success will be a FAT format.
good luck
hello!sorry for hearing about your tablet!mine today fell of a chair and the glass is broken so if you try everything and you can't fix your tablet i would like to buy it for the screen cause it costs a lot for a replacement!!!thanks!
komakos96 said:
hello!sorry for hearing about your tablet!mine today fell of a chair and the glass is broken so if you try everything and you can't fix your tablet i would like to buy it for the screen cause it costs a lot for a replacement!!!thanks!
Click to expand...
Click to collapse
There's nothing wrong with it... you just need to flash stock with fastboot or adb sideload it.
Sent from my SGH-I777 using xda premium
Thanks for the help guys. Unbricked it with OTG cable that came in the mail yesterday!
tjonestmj137 said:
Thanks for the help guys. Unbricked it with OTG cable that came in the mail yesterday!
Click to expand...
Click to collapse
Good news.
Click the "Thanks" button on the posts of those that helped you - at the end of the year we'll be able to trade them in for something valuable - brownie points
tjonestmj137 said:
Thanks for the help guys. Unbricked it with OTG cable that came in the mail yesterday!
Click to expand...
Click to collapse
Good stuff pal, it's handy to have otg eh?
Sent from my Nexus 7 using xda premium
Then...
tjonestmj137 said:
Yeah I can still get into fastboot & recovery (Clockwork mod touch). I've tried mounting the sd card in recovery but nothing happens. Tried doing adb to sideload a rom but my device is showing up.
Click to expand...
Click to collapse
Wipe data again, wipe cache, wipe dalvik cache, and re-flash SmoothROM.
Good luck, a bootloop is not a simple thing...
---------- Post added at 12:26 PM ---------- Previous post was at 12:21 PM ----------
tjonestmj137 said:
Thanks for the help guys. Unbricked it with OTG cable that came in the mail yesterday!
Click to expand...
Click to collapse
If you have your problem solved, please put [SOLVED] at the start of the title of the thread, then the people will not post a solution.
Thanks.
Somehow I have screwed my nexus 7(16gb wifi only) up so bad that I cannot get back into fastboot or recovery mode. Any attempt at bootup is met with a blank screen. How do you suggest I proceed?
thefugugitive87 said:
Somehow I have screwed my nexus 7(16gb wifi only) up so bad that I cannot get back into fastboot or recovery mode. Any attempt at bootup is met with a blank screen. How do you suggest I proceed?
Click to expand...
Click to collapse
If fastboot is really dead, then you're out of luck. Have you tried running fastboot commands, however, after trying to boot into fastboot? Sometimes the underlying software will run correctly, even if the screen is nonresponsive.
Rirere said:
If fastboot is really dead, then you're out of luck. Have you tried running fastboot commands, however, after trying to boot into fastboot? Sometimes the underlying software will run correctly, even if the screen is nonresponsive.
Click to expand...
Click to collapse
So I assume this means my only hope is to replace the motherboard which houses the memory. Is that a good assumption?
HELP!
so i had the same thing happen to me. I had access to recovery still but instead of re flashing i tried to use nexus root toolkit to factory reset. somehow fastboot failed halfway through and now recovery is gone with everything else. The only thing i can get into is the bootloader mode....
My device is still listed as a fastboot device, but when i try to re-run the flash to stock i get this: (see attached picture)
Please help, I honestly have been working on this for days, but i simply do not know enough to fix it!
I will post a new topic if no one responds. Thanks
Help Needed
tjonestmj137 said:
Thanks for the help guys. Unbricked it with OTG cable that came in the mail yesterday!
Click to expand...
Click to collapse
I'm having a similar problem. Present state of the device is that my N7 boots into the bootloader and then to the custom recovery. I've accidently erased the OS.
Can you tell me how you managed to unbrick via OTG. Should I move the factory image to usb flash drive and then mount it via OTG and then try to flash it via recovery???
Please help:crying:
OK, so I'm not a noob, but I am, apparently a moron. I was trying to flash a ROM and accidentally wiped my entire device. I can't get my PC (Windows 8) to recognize my phone. I have tried installing the drivers multiple times. not sure where to go from here. I've always worked with Samsung so I am a little lost in the LG world. Any advice would be GREATLY appreciated!!!
bradspace said:
OK, so I'm not a noob, but I am, apparently a moron. I was trying to flash a ROM and accidentally wiped my entire device. I can't get my PC (Windows 8) to recognize my phone. I have tried installing the drivers multiple times. not sure where to go from here. I've always worked with Samsung so I am a little lost in the LG world. Any advice would be GREATLY appreciated!!!
Click to expand...
Click to collapse
Can you get to recovery or download mode?..
RubbleTea said:
Can you get to recovery or download mode?..
Click to expand...
Click to collapse
I have TWRP 2.6.3.2 installed and I can get to it, but I have no way to get a ROM onto the phone to flash and no backups. If I could get my phone to be recognized by the PC, I have my TWRP backups on my laptop. Also, yes, I can get to download mode as well, but it is stuck at the window saying not to unplug the cable and it is updating but it never does anything.
If you can get into twrp you can adb sideload a rom or push your backup to your sdcard.
Sent from my OMNIpotent LG-G2.
bradspace said:
I have TWRP 2.6.3.2 installed and I can get to it, but I have no way to get a ROM onto the phone to flash and no backups. If I could get my phone to be recognized by the PC, I have my TWRP backups on my laptop. Also, yes, I can get to download mode as well, but it is stuck at the window saying not to unplug the cable and it is updating but it never does anything.
Click to expand...
Click to collapse
Yah like the post above adb sideload should work I actually just helped somebody and posted instructions and don't think thread is closed...also if your phone won't recognize could also try Koush universal drivers
Here's the link to the thread
http://forum.xda-developers.com/showthread.php?t=2581013&page=2
Recon Freak said:
If you can get into twrp you can adb sideload a rom or push your backup to your sdcard.
Sent from my OMNIpotent LG-G2.
Click to expand...
Click to collapse
I have tried that, but it will not read the ROM file.
adb push your backup to sdcard then restore will not work?
Sent from my OMNIpotent LG-G2.
RubbleTea said:
Yah like the post above adb sideload should work I actually just helped somebody and posted instructions and don't think thread is closed...also if your phone won't recognize could also try Koush universal drivers
Here's the link to the thread
http://forum.xda-developers.com/showthread.php?t=2581013&page=2
Click to expand...
Click to collapse
I LOVE YOU MAN!!! Seriously, thank you. Another trick to put into my back pocket. I was able to push CM and get it back to life.
bradspace said:
I LOVE YOU MAN!!! Seriously, thank you. Another trick to put into my back pocket. I was able to push CM and get it back to life.
Click to expand...
Click to collapse
Nice man good to hear
Hello my fellow humans of planet earth. So... With this being the first ever thread I open I get to say right from the very start that I am no pro at rooting / installing custom roms and similar stuff. I am more of a DESKTOP guy...
In any case... Yesterday I messed up big time, and don't get me wrong, I did my research... Anyway. What happened was I was updating to the latest version of CM 12.1, and just as I went in TWRP and tryied to start flashing, I got an error and no update. Then, smart me, tryied installing another update, a bit older, but still newer than the one I had running. This one probably was a bad zip and destroyed my installation of CM12... Then, even smarter me, decided it was a good idea to format and try to get CM12 anew. The TL;DR here is... I have no CM, when I connect the phone via usb it recognises it but it says "This folder is empty", so doesn't show anything on the pc side..., and the strangest problem of them all is that TWRP has gone CRAAAYYYYY! Man... Currently, the phone boots only in TWRP, but TWRP is unusable. The touch is not working properly, as I tap "wipe" for example and it opens "settings", for example. Even If I am able to actally click something, I can't do sh*t because I can't use the "slide to do w/e" ....
I am so confused. I tryied using methods like the TOT unbrick and it starts flashing and then it reboots... but into TWRP, I have no controll over anything. I even tryied some ADB stuff I found online but had no luck with that....
ANY kind of help would be worth a lot.
In any case, due to my limited internet access these days, I won't be able to see answers immediately but will probably be able to do so in some hours!
Guys, please.. for the sake of humanity, help.
Hi am Yamo said:
Hello my fellow humans of planet earth. So... With this being the first ever thread I open I get to say right from the very start that I am no pro at rooting / installing custom roms and similar stuff. I am more of a DESKTOP guy...
In any case... Yesterday I messed up big time, and don't get me wrong, I did my research... Anyway. What happened was I was updating to the latest version of CM 12.1, and just as I went in TWRP and tryied to start flashing, I got an error and no update. Then, smart me, tryied installing another update, a bit older, but still newer than the one I had running. This one probably was a bad zip and destroyed my installation of CM12... Then, even smarter me, decided it was a good idea to format and try to get CM12 anew. The TL;DR here is... I have no CM, when I connect the phone via usb it recognises it but it says "This folder is empty", so doesn't show anything on the pc side..., and the strangest problem of them all is that TWRP has gone CRAAAYYYYY! Man... Currently, the phone boots only in TWRP, but TWRP is unusable. The touch is not working properly, as I tap "wipe" for example and it opens "settings", for example. Even If I am able to actally click something, I can't do sh*t because I can't use the "slide to do w/e" ....
I am so confused. I tryied using methods like the TOT unbrick and it starts flashing and then it reboots... but into TWRP, I have no controll over anything. I even tryied some ADB stuff I found online but had no luck with that....
ANY kind of help would be worth a lot.
In any case, due to my limited internet access these days, I won't be able to see answers immediately but will probably be able to do so in some hours!
Guys, please.. for the sake of humanity, help.
Click to expand...
Click to collapse
Are you able to get into download mode? You can do that by holding the power button for 30 sec to power down your phone. Then hold volume up and then plug in the USB. You should get into firmware update screen.
Sent from my LG-D800 using Tapatalk
xmayhemreturnsx said:
Are you able to get into download mode? You can do that by holding the power button for 30 sec to power down your phone. Then hold volume up and then plug in the USB. You should get into firmware update screen.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Yes I am totally able to. Using the download mode, I tryied fixing my phone with the TOT method, with no luck though, as it started and then rebooted into TWRP, and at 220 seconds or sthing gave me a "failed" on LG Flash Tool....
Hi am Yamo said:
Yes I am totally able to. Using the download mode, I tryied fixing my phone with the TOT method, with no luck though, as it started and then rebooted into TWRP, and at 220 seconds or sthing gave me a "failed" on LG Flash Tool....
Click to expand...
Click to collapse
Are you positive that you have an official d802, because there are a lot of refurbished lg g2's that claim they are d802 but in actuality they have d800/d802 motherboards. The only way to find out is to open your phone and look at the model. Open the phone then remove the power button cover, from there there should be a flex cable running from the top left to a secondary board. Lift that wire up and look at the silver square box and it should have your motherboard model.
Sent from my LG-D800 using Tapatalk
---------- Post added at 05:12 AM ---------- Previous post was at 05:11 AM ----------
xmayhemreturnsx said:
Are you positive that you have an official d802, because there are a lot of refurbished lg g2's that claim they are d802 but in actuality they have d800/d802 motherboards. The only way to find out is to open your phone and look at the model. Open the phone then remove the power button cover, from there there should be a flex cable running from the top left to a secondary board. Lift that wire up and look at the silver square box and it should have your motherboard model.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
D800/d801 motherboards*
Sent from my LG-D800 using Tapatalk
xmayhemreturnsx said:
Are you positive that you have an official d802, because there are a lot of refurbished lg g2's that claim they are d802 but in actuality they have d800/d802 motherboards. The only way to find out is to open your phone and look at the model. Open the phone then remove the power button cover, from there there should be a flex cable running from the top left to a secondary board. Lift that wire up and look at the silver square box and it should have your motherboard model.
Sent from my LG-D800 using Tapatalk
---------- Post added at 05:12 AM ---------- Previous post was at 05:11 AM ----------
D800/d801 motherboards*
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
I think the fact that I have had a similar experience to what I am facing now in the past, and fixed the phone using the TOT method FOR the actual D802, which worked, is enough. If not.. I might as well check it...
Hi am Yamo said:
I think the fact that I have had a similar experience to what I am facing now in the past, and fixed the phone using the TOT method FOR the actual D802, which worked, is enough. If not.. I might as well check it...
Click to expand...
Click to collapse
The reason I ask is because the touch is usually jumpy when you install a ROM that is different from your device model. Are you able to get into adb sideload?
Sent from my LG-D800 using Tapatalk
xmayhemreturnsx said:
The reason I ask is because the touch is usually jumpy when you install a ROM that is different from your device model. Are you able to get into adb sideload?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
No.. TWRP is kinda unusable... I followed a tutorial by HighOnAndroid the other day, and I installed some driver and I am able to interact with the phone using ADB with a fastboot folder I have. I don't know if it is the same thing though.
Hi am Yamo said:
No.. TWRP is kinda unusable... I followed a tutorial by HighOnAndroid the other day, and I installed some driver and I am able to interact with the phone using ADB with a fastboot folder I have. I don't know if it is the same thing though.
Click to expand...
Click to collapse
Try install kouch adb drivers, and download minimal adb and fastboot (Google) and then attempt to start adb sideload. But first can you check your device variant. We don't want to brick your phone.
Sent from my LG-D800 using Tapatalk
xmayhemreturnsx said:
Try install kouch adb drivers, and download minimal adb and fastboot (Google) and then attempt to start adb sideload. But first can you check your device variant. We don't want to brick your phone.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Ok. So I did that, and now I have a cmd running which reads:
C:\Program Files <x86>\Minimal ADB and Fastboot>
I don't even know if that is what I had to do..
Hi am Yamo said:
Ok. So I did that, and now I have a cmd running which reads:
C:\Program Files <x86>\Minimal ADB and Fastboot>
I don't even know if that is what I had to do..
Click to expand...
Click to collapse
Did you install twrp or did you receive it already installed?
Sent from my LG-D800 using Tapatalk
xmayhemreturnsx said:
Did you install twrp or did you receive it already installed?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
I do have to confess... my TWRP was working great, ...UNTIL me being smarter than usual followed some guide I found online trying to get CM12.1 and used an app called AutoRec or something... which wasn't nessessary since I already had TWRP.. and then this happened. TWRP has gone nuts.
Hi am Yamo said:
I do have to confess... my TWRP was working great, ...UNTIL me being smarter than usual followed some guide I found online trying to get CM12.1 and used an app called AutoRec or something... which wasn't nessessary since I already had TWRP.. and then this happened. TWRP has gone nuts.
Click to expand...
Click to collapse
Hmm, can you please try to select sideload from twrp and see if you can start it.
Sent from my LG-D800 using Tapatalk
xmayhemreturnsx said:
Hmm, can you please try to select sideload from twrp and see if you can start it.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
I get there.. But is says swipe to start sideload... which I am unable to do...
Hi am Yamo said:
I get there.. But is says swipe to start sideload... which I am unable to do...
Click to expand...
Click to collapse
Try figuring out how far off your touches register with your phone. And then try to swipe once you find the pattern
Sent from my LG-D800 using Tapatalk
xmayhemreturnsx said:
Try figuring out how far off your touches register with your phone. And then try to swipe once you find the pattern
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
I already have. Here's the funny part though.. I don't have enough screen... hahaha... I registers my touches a bit lower and I cannot go that low... I get that we have a problem here...
The only thing I was able to think of Is trying to emulate the phone through the pc, but I don't know If I can do that without actually having a working Android going...
Hi am Yamo said:
I already have. Here's the funny part though.. I don't have enough screen... hahaha... I registers my touches a bit lower and I cannot go that low... I get that we have a problem here...
The only thing I was able to think of Is trying to emulate the phone through the pc, but I don't know If I can do that without actually having a working Android going...
Click to expand...
Click to collapse
Are you able to take a video of what happens when you flash a tot file. I have never seen that before and maybe the video will help clear some things up. Right now thinga aren't looking good. But don't lose hope there is a method but it is very very tricky/hard.
Sent from my LG-D800 using Tapatalk
Hi am Yamo said:
I already have. Here's the funny part though.. I don't have enough screen... hahaha... I registers my touches a bit lower and I cannot go that low... I get that we have a problem here...
The only thing I was able to think of Is trying to emulate the phone through the pc, but I don't know If I can do that without actually having a working Android going...
Click to expand...
Click to collapse
Forget what I just said I am in sideload.
It says unable to mount /data btw...
Hi am Yamo said:
Forget what I just said I am in sideload.
It says unable to mount /data btw...
Click to expand...
Click to collapse
Now it says.. adb sideload complete and a (failed) beneath it...
edit: Now i am in sideload again.
Hi am Yamo said:
Forget what I just said I am in sideload.
It says unable to mount /data btw...
Click to expand...
Click to collapse
Okay, since your in side load. Go to the computer and go to the minimal adb and fastboot folder. Click **** + right click. Select open command line here. Type in "adb devices" and tell me if your device is recognized.
Sent from my LG-D800 using Tapatalk
---------- Post added at 05:59 AM ---------- Previous post was at 05:59 AM ----------
Shift + right click
Sent from my LG-D800 using Tapatalk
xmayhemreturnsx said:
Okay, since your in side load. Go to the computer and go to the minimal adb and fastboot folder. Click **** + right click. Select open command line here. Type in "adb devices" and tell me if your device is recognized.
Sent from my LG-D800 using Tapatalk
---------- Post added at 05:59 AM ---------- Previous post was at 05:59 AM ----------
Shift + right click
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Yes it does get recognized!
Hey guys, any help would be appreciated!
Alright, I will try to explain it simply and clean. Basically, the thing is when I first got my LG G2 (kitkat), I rooted it and installed some mods. One of them was G2 tweaksbox xposed module. With that module, you can hide "clear all" and "task manager" button from recents. But the thing is, after I re-flashed my ROM (absolutely full wipe, nothing left), weird thing happened since. You all know that animation when going to recents from an app in jelly bean and kitkat and now, it's kinda bugged. The animation is a little bit off graphically. Basically, the animation reads navigation bar like it's a little bit bigger than it should be and it looks kinda weird, like it first goes a little bit more bottom and gets back up making it look graphically bad. Everything shows that nav bar is stock size, even tried many mods that make it stock and yeah, basically it is stock but even some apps still read it like it's wrong. That animation is fixable if I hide that buttons in recents again, but it bugs me that even after 3 months of MANY wipes and all the crap it's still like that, I just can't make it fully stock if I would want to.
So my question is, is something from xposed or anything like that left in phone even after going through FULL wipes many, many, like maaany times? Did I miss something? If so, can I do something like manual cleaning so phone will finally be 100% stock again? I call it "memory effect", sort of like phone still reads it like there's an xposed module partially and it just can't get a rid of that.
So, I would really appreciate if you read this fully and try to help me. Thanks!
AssassinGEO said:
Hey guys, any help would be appreciated!
Alright, I will try to explain it simply and clean. Basically, the thing is when I first got my LG G2 (kitkat), I rooted it and installed some mods. One of them was G2 tweaksbox xposed module. With that module, you can hide "clear all" and "task manager" button from recents. But the thing is, after I re-flashed my ROM (absolutely full wipe, nothing left), weird thing happened since. You all know that animation when going to recents from an app in jelly bean and kitkat and now, it's kinda bugged. The animation is a little bit off graphically. Basically, the animation reads navigation bar like it's a little bit bigger than it should be and it looks kinda weird, like it first goes a little bit more bottom and gets back up making it look graphically bad. Everything shows that nav bar is stock size, even tried many mods that make it stock and yeah, basically it is stock but even some apps still read it like it's wrong. That animation is fixable if I hide that buttons in recents again, but it bugs me that even after 3 months of MANY wipes and all the crap it's still like that, I just can't make it fully stock if I would want to.
So my question is, is something from xposed or anything like that left in phone even after going through FULL wipes many, many, like maaany times? Did I miss something? If so, can I do something like manual cleaning so phone will finally be 100% stock again? I call it "memory effect", sort of like phone still reads it like there's an xposed module partially and it just can't get a rid of that.
So, I would really appreciate if you read this fully and try to help me. Thanks!
Click to expand...
Click to collapse
Did you format system partition.
rajkatiyar07 said:
Did you format system partition.
Click to expand...
Click to collapse
Well, yeah. I wiped like everything, dude. Wiped from TWRP, then flashed .kdz with CSE. Everything is stock except that.
AssassinGEO said:
Well, yeah. I wiped like everything, dude. Wiped from TWRP, then flashed .kdz with CSE. Everything is stock except that.
Click to expand...
Click to collapse
Well.. i am giving up
rajkatiyar07 said:
Well.. i am giving up
Click to expand...
Click to collapse
Yeah, that's how bad my situation is. I just can't understand what the hell is happening with this phone. I waited for it like for 6 months and never enjoyed it once.
If you use Odin to return to stock, that will wipe your entire phone completely. It will wipe your internal storage, and all partitions. It works on the d800, and I don't see why it wouldn't work for your phone.
Sent from my SM-T310 using XDA Premium HD app
If you have an OTG cable or drive with ROM and gapps files plugged in to your g2 there is an option to format the phone in TWRP.
But you must have ALL the files needed to flash the new ROM.
Sent from my LG-D802 using Tapatalk
nabril15 said:
If you use Odin to return to stock, that will wipe your entire phone completely. It will wipe your internal storage, and all partitions. It works on the d800, and I don't see why it wouldn't work for your phone.
Sent from my SM-T310 using XDA Premium HD app
Click to expand...
Click to collapse
It's not like it doesn't work, it's like it works, it wipes everything, but the system is still reading like xposed is there, so what I understood is that full wipe isn't really a full wipe after all.
Treboeth said:
If you have an OTG cable or drive with ROM and gapps files plugged in to your g2 there is an option to format the phone in TWRP.
But you must have ALL the files needed to flash the new ROM.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
OTG? What do you mean by that? Does that thing cleans the device different way?
On The Go ,allows additional storage to be connected to our phones like an external hard drive
http://www.amazon.co.uk/gp/aw/d/B00...X110_SY165&keywords=64gb+flash+drive+kingston
http://www.amazon.co.uk/aLLreLi-LIFETIME-WARRANTY-Motorola-Samsung/dp/B0064GZAIQ
Sent from my LG-D802 using Tapatalk
Can't you go back to stock without root and start over?
http://forum.xda-developers.com/showthread.php?t=2432476
Treboeth said:
On The Go ,allows additional storage to be connected to our phones like an external hard drive
http://www.amazon.co.uk/gp/aw/d/B00...X110_SY165&keywords=64gb+flash+drive+kingston
http://www.amazon.co.uk/aLLreLi-LIFETIME-WARRANTY-Motorola-Samsung/dp/B0064GZAIQ
Well I still can't understand how will that help me. Maybe I'm a little stupid.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
vinilr said:
Can't you go back to stock without root and start over?
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
As I already mentioned, I tried that. I tried all the wiping methods possible.
When you format in TWRP it gives you a clean start, with all the files on the OTG it gives an almost new device feel.
Sent from my LG-D802 using Tapatalk
AssassinGEO said:
As I already mentioned, I tried that. I tried all the wiping methods possible.
Click to expand...
Click to collapse
Sorry, per your post I was thinking you tried only the Recovery TWRP Wipes. Not reinstalling the stock rom.
In this case I have no idea, sorry =(
Treboeth said:
When you format in TWRP it gives you a clean start, with all the files on the OTG it gives an almost new device feel.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
So that means it's different from normal wiping/stock ROM installing?
vinilr said:
Sorry, per your post I was thinking you tried only the Recovery TWRP Wipes. Not reinstalling the stock rom.
In this case I have no idea, sorry =(
Click to expand...
Click to collapse
Np. That's how hard my problem is.
wich twrp version i think one of them didnt wipe correctly,something like that..
raptorddd said:
wich twrp version i think one of them didnt wipe correctly,something like that..
Click to expand...
Click to collapse
For that time it was the one from Autorec, something like 2.7.0.0 I think, not sure..
Now I'm on 2.8.7.3 and still the same.
AssassinGEO said:
For that time it was the one from Autorec, something like 2.7.0.0 I think, not sure..
Now I'm on 2.8.7.3 and still the same.
Click to expand...
Click to collapse
you did advance wipe, and format , typing yes and enter... try the blastagator twrp. in here xda
raptorddd said:
you did advance wipe, and format , typing yes and enter... try the blastagator twrp. in here xda
Click to expand...
Click to collapse
Yes I did.
Blastagator is the one I'm using.
AssassinGEO said:
Yes I did.
Blastagator is the one I'm using.
Click to expand...
Click to collapse
i have no idea i tought restoring to etock using the tot or kdz was the only way to delete everything.. sorry good luck
Try flash stock tot with lg flashtool it will clean dovice fully make it like new
---------- Post added at 08:22 AM ---------- Previous post was at 08:21 AM ----------
nabril15 said:
If you use Odin to return to stock, that will wipe your entire phone completely. It will wipe your internal storage, and all partitions. It works on the d800, and I don't see why it wouldn't work for your phone.
Sent from my SM-T310 using XDA Premium HD app
Click to expand...
Click to collapse
This is lg phone u can not use odin