hi xda guys this is my story
i have an at&t samsung s4 on android 4.2 i have tried to update it via wifi to 4.4
but no use. a message appear say's " your device is up to date "
i have tied "loki way" it failed
i have tried "odin tool way' it failed it won't complete the proses
i have tried samsung kais it fail's too a message says no update for this device
***** i managed to root the device
and then i found the safestrap apk i have insert the TWRP recovery
i have made a backup in case something go's wrong
and i have tries to flash a clean google s4 4.4.4 rom
**** and then the the phone stuck of samsung logo and vibrate often .the TWRP is lost
**** i have tried to recover the the via samsung kias it made it wors
now it have message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
i have tried via odin using the official firmware that i have downloaded. but did not work olso
i have tried the kais recovery mode but i did not get the recovery code
help my friend what should i do
nead you help desperately
any help
any help any one
:fingers-crossed:
You need to go to the at&t section on xda. This section is not for your phone.
Because you don't give any details about the Odin error, I can't help you further.
Most Odin errors can be solved by:
- Other cable
- Other usb port
- Other pc.
hi there, i am stuck in a mess with my phone and need ur expert advice please help. i am using samsung galaxy s5 exynos version on android 4.4.2. i tried to install custom recovery but it didnt install well and my knoxx counter was tripped too. now wenever i try too boot my phone there is green android sign showing no command and error after that. however i m still getting option of stock recovery and it is workin too. is there any way to remove that error. thanks for the help and time.
[Q] Galaxy Note 3(N9005) - HARD BRICKED, Detected on PC as "QHSUSB_BULK" device
My Note 3 (SM N9005 - Lollipop Version) has been hard bricked. It doesn't powering up, no sign of any light/vibration. Looks like a dead phone.
When I connect my phone on PC, Device manager detect it as "QHSUSB_BULK" device. But on Odin 3.09 it doesn't detect anything.
Please please help me, PLEASE...........
Olyul said:
My Note 3 (SM N9005 - Lollipop Version) has been hard bricked. It doesn't powering up, no sign of any light/vibration. Looks like a dead phone.
When I connect my phone on PC, Device manager detect it as "QHSUSB_BULK" device. But on Odin 3.09 it doesn't detect anything.
Please please help me, PLEASE...........
Click to expand...
Click to collapse
Possible solution: HERE.
Joku1981 said:
Possible solution: HERE.
Click to expand...
Click to collapse
I have tried, it didn't work. I was using lollipop version.
debrick.img didn't work as I couldn't find the image file of lollipop.
PLEASE HELP ME TO GET OUT OF THIS PROBLEM!!!
Same here, i have a N9005 and tried all debrick img's present in the forums with a 32gb SD Card and no success.
Is there a Lollipop debrick image? Or if i have access to another N9005 (without root) how can i create one?
Regards.
N9005 Lollipop brick
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode and is detected by odin, but re flashing the firmware always fails.....is there a solution for this.....please help
mjmbirige said:
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode and is detected by odin, but re flashing the firmware always fails.....is there a solution for this.....please help
Click to expand...
Click to collapse
spamming please
Dear all,
Could somebody help me please. My Note 3 LTE (N9005) can not make/ receive calls. I can use internet, play song, etc...
When I make/ receive call phone is hanging too long and also call is can not reach to another phone.
I have tried to fix too many way.
1. EFS restore.
2. Cache clear (even flash new rom also)
3. Update kernel.
4. Restore my old working backup before.
PS. I'm using Audax ROM (lolipop).
I hope someone can help me out from this things.
Thanks in advance.
So i am trying to flash CM but on the TWRP screen it gives an error saying that my device is jactivelte and its not supported while my phone the I9505 !!
did i do something that changed it to jactivelte ?
please someone help
Droidneck said:
So i am trying to flash CM but on the TWRP screen it gives an error saying that my device is jactivelte and its not supported while my phone the I9505 !!
did i do something that changed it to jactivelte ?
please someone help
Click to expand...
Click to collapse
Maybe your jactivelte says it is GT-I9505.
Boot into download mode and read the phone model. Whatever it says there, that's what the phone model is.
Odds are high that this is a counterfeit phone. The S4 active doesn't have capacitive buttons on the screen so if this were truly a S4 Active in an I9505 shell, the buttons wouldn't work.
Hi everyone, I have a samung note 4 (SM N910C) and while using it just went off and when turned back on is stuck on the Samsung galaxy logo and wont get past it, tried pulling battery and memmory card and all as soft tricks from google but is of no use, so tried flashing a stock rom and odin shows pass at the end but the phone wont get past the samsung logo, checked and found need to do a format and all through recovery but i cant get into recocery either, havng error message recovery is not seandroid enforcing, tried flashing twrp but still odin pass and the error persists..
Anyone could be of any assistance please? Is there any workaround for this issue? Thank you in advance for the help..
Hello? Anybody plz.
try the PC program Smart Switch, you may succeed to get the emergency firmware installed on it
this might help