Related
Hi all. Sorry fo my bad English - I'm russian.
Ok, I have a bricked ZTE Blade - GEN2, China 256Mb RAM.
I've read this topic modaco com/topic/343587-guide-de-bricking-a-zte-blade/
I have some problems, thats why I'm asking for some help.
1) I've used Method 5: The dodgy ZTE firmware flasher
At the point Flash Firmware - 6)When finished it should boot into FTM mode. - but it doesn't.
I've took out the battary, and rebooted my phone in the FTM-mode. Succesfully restored IMEI (got no errors).
And then:
Put clockworkmod in the recovery partition
Take out the battery and turn on the phone. Clockworkmod should load
There is no ClockWork! Only FTM...
Installed ClockWork via cmd script. It has loaded, but here is the next problem:
"You can now flash a ROM"
I've tried to flash Swedish_Spring_RLS5. So I mounted system and data.
Installation ok, but if i reboot i get clockwork.
Tried to flash image.bin from zte-website. If i reboot after the installation i get clockwork.
Tried to get stock recovery. Installed it via cmd script, but it doesn't load.
I get FTM-mode.
There is no phone-workshop in my city, and I have no more warranty for this smartphone, so i hope you can help me. Thanks.
At the beggining the problem was - the boot was down. The splash appeares, slides to right, the phone reboots.
Try reflashing clockworkmod and do a full wipe.
It might also help if you format system.
Sent from my GT-I9300 using xda premium
doesn't helped
Ok, reinstalled cwm, have done all wipes, formatted system,data.
Tried to flash.
Nothing. Reboot => CWM
Does the rom flash process success?
Try flashing another rom.
Sent from my GT-I9300 using xda premium
yes
yes, it does. i get no errors, and
there are files in the system partiton.
when i make a backup i see all the files from the os.
have tried. cm7, cm9, other stock: 2.1, 2.3 - every gives the same result - only cwm is loading.
when i flash the stock recovery - then i get only ftm on load.
is my phone totally bricked? i hope there is a way to restore...
It's semi-bricked. You could try to flash stock rom with ftm and root it with z4root.
Sent from my GT-I9300 using xda premium
ok
ok. i will try P729J_2GW900V2.2.0B01-NO_RECOVERY-update_signed.zip
will update this message when done.
--- upd
tried:
1) china tpt's
2) all wipes and formats
3) all mounts + flashing Swedish_Spring_RLS5
4) boot.img via adb
result: ANDROID Loaded, but the hardware keys are not working... UrbanDrawer, any ideas?
Just reflash rom and wipe data.
If the problem didn't get fixed, flash another rom.
Sent from my GT-I9300 using xda premium
no success
Flashed a stock China ROM.
No success. Boot info FTM. No way to boot the system...
Tried another ROM's for 512Mb models - same result: FTM-mode :crying:
Any other ideas?
UrbanDrawer said:
Try to flash stock rom with ftm and root it with z4root.
Click to expand...
Click to collapse
Before doing this, you could also hard reset the phone, that way there's not going to be any software-related problems.
Sent from my GT-I9300 using xda premium
what i do
Ok. What i do.
1) Launch ZTE Flasher, swich my phone into download mode (vol+/vol-/power)
2) Flash IT (China v880 Firmware)
3) When finished - release battery.
Turn on and get FTM-mode, no clockword or smth. else. Only FTM.
4) TPT's : China v880 GEN2 TPT's.
When finished - the phone doe's not reboot. Need to release the battery, and to power on.
5) Oh my God! Yellow CWM!!! :laugh:
I mount data,system.
All wipes.
Format all, except SD.
6) Flashing ROM.
7) Reboot.
After the reboot I get CWM (on stock rom's) or FTM (after CM).
What am I doing wrong?
Try method 1.
http://www.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/
Sent from my GT-I9300 using xda premium
cwn
No chance. CWM loading. No ROM
Did you format boot, system, data, cache, and sd-ext?
Sent from my GT-I9300 using xda premium
UrbanDrawer said:
Did you format boot, system, data, cache, and sd-ext?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Sure. I did!
good morning everybody,
I am a D802 user, and I have rooted it, installed TWRP last build and wanted to install the slimkat ROM
but, I don't know why, but first I didn't perform a backup, and secondly instead of performing the system wipe, I,ve been in advanced mode and decided to wipe the internal data :silly:
and of course, now I can,t find my zip file for the nex ROM, and when I reboot I am blocked on LG logo screen, I can enter in recovery or download mode, that's all !!!
is there any other solution that flashing the stock ROM (.kdz) to solve my problem ??
many thx !!
G. :good:
geobart said:
good morning everybody,
I am a D802 user, and I have rooted it, installed TWRP last build and wanted to install the slimkat ROM
but, I don't know why, but first I didn't perform a backup, and secondly instead of performing the system wipe, I,ve been in advanced mode and decided to wipe the internal data :silly:
and of course, now I can,t find my zip file for the nex ROM, and when I reboot I am blocked on LG logo screen, I can enter in recovery or download mode, that's all !!!
is there any other solution that flashing the stock ROM (.kdz) to solve my problem ??
many thx !!
G. :good:
Click to expand...
Click to collapse
Have you tried connecting thru usb to computer and then mount sd card and transfer a zip then?
Sent from my LG-D801 using Tapatalk
Just do adb sideload
Sent from my LG-G2 using Tapatalk
/rawda : when I put USB cable, nothing happens on my computer !!! so what should I do to mount SD card ?
/darkobas : what do you mean with "do adb sideload" ? i need to be connected with USB, because I thought I try this menu but nothing change, but maybe I forgott something !
many thx guys
geobart said:
/rawda : when I put USB cable, nothing happens on my computer !!! so what should I do to mount SD card ?
/darkobas : what do you mean with "do adb sideload" ? i need to be connected with USB, because I thought I try this menu but nothing change, but maybe I forgott something !
many thx guys
Click to expand...
Click to collapse
Can you boot into recovery? Or download mode?
RubbleTea said:
Can you boot into recovery? Or download mode?
Click to expand...
Click to collapse
Yes, I can boot in both mode recovery and download, that's the only thing I can do at this time !!!!! :laugh:
geobart said:
Yes, I can boot in both mode recovery and download, that's the only thing I can do at this time !!!!! :laugh:
Click to expand...
Click to collapse
Cool, so if you install adb onto your PC and set it up you can sideload a ROM to your recovery....and if you want you can flash stock in download mode with thread in general forum....I'm hitting the sack but if you look up adb sideload you should be able to get all the instructions
---------- Post added at 01:48 AM ---------- Previous post was at 01:46 AM ----------
Basically once you have adb setup and have a ROM ready its a piece of cake and lots of threads if you Google it
I think I will have a problem with ADB, because before flashing I disable the USB debugging mode !!!! and unfortunatly I can't enable it !! Am I true ???
geobart said:
I think I will have a problem with ADB, because before flashing I disable the USB debugging mode !!!! and unfortunatly I can't enable it !! Am I true ???
Click to expand...
Click to collapse
No youll still ne able to do it in recovery
Sent from my LG-D801 using Tapatalk
look into your recovery settings, it should have an adb option you can togle, otherwise let it go in booting loop.
navigate to the folder with the files you rooted with. There should be a adb file.
then shift rightclick if windows on that folder that contains that stuff. Select command prompt from here.
adb devices,
or adb it will or should list the phone, then find the codes to push the desired rom and optional apps to root\sdcard.
then adb reboot recovery, or reboot manually into recovery and flash your rom plus optional gapps
Sent from my LG-D802 using xda app-developers app
adb didn't work, can't recognize my device with qdb devices command !!
anyway, I flash the stock rom in Download mode and then root, TWRP and custom Rom and everything is good now !!
thx for all
darkobas said:
Just do adb sideload
Sent from my LG-G2 using Tapatalk
Click to expand...
Click to collapse
hi , if you can help me please help !!
i have rooted my g2 and installed twrp recovery
then i tried to flash cm 11
it started flashing then it says "fail"
i tried to reboot my phone
it get stuck on lg screen
then someone fixed it for me
i tried to flash PA rom it failed what i can do to flash the rom on my phone
majdifa said:
hi , if you can help me please help !!
i have rooted my g2 and installed twrp recovery
then i tried to flash cm 11
it started flashing then it says "fail"
i tried to reboot my phone
it get stuck on lg screen
then someone fixed it for me
i tried to flash PA rom it failed what i can do to flash the rom on my phone
Click to expand...
Click to collapse
Im guessing your recovery is 2.6.3.2 you need twrp 2.6.3.3 to flash cm11
Sent from my LG-LS980 using xda premium
mchlbenner said:
Im guessing your recovery is 2.6.3.2 you need twrp 2.6.3.3 to flash cm11
Sent from my LG-LS980 using xda premium
Click to expand...
Click to collapse
Thank you a lot
But I've got another problem,
I Installed TWRP 2.6.3.3
Then I downloaded CM 11 and g apps
Then I rebooted my phone into recovery
I have made back up
And then i wiped dalvik cache and cache
Then i have flashed CM 11 and google apps there was no "fails" or errors
But when installing the zip finished
I rebooted my phone the phone get stuck on CM logo ??
majdifa said:
Thank you a lot
But I've got another problem,
I Installed TWRP 2.6.3.3
Then I downloaded CM 11 and g apps
Then I rebooted my phone into recovery
I have made back up
And then i wiped dalvik cache and cache
Then i have flashed CM 11 and google apps there was no "fails" or errors
But when installing the zip finished
I rebooted my phone the phone get stuck on CM logo ??
Click to expand...
Click to collapse
Whipe system data and data then reboot.
Dont ever whipe internal data.
Sent from my LG-LS980 using xda premium
I just want to share my experience after a bad flash and no way to recover.
I was still able to get to TWRP. I had flashed a Rom and it went bad. Long story short. No Loki causing boot into fastboot screen.
Tried using flash tools to restore stock with kdz. No good kept stopping at 49% because it was not the expected firmware.
The fix.
Wipe system in recovery then try again. With system wiped. The firmware matches and installs as expected.
Just wanted to share my experience. Maybe it will help someone else with the same problem.
Brian
Sent from my LG-D801 using Tapatalk
THANK YOU!!
I registered specifically so I could post here.
I was looking for ages trying to find a fix. Always getting stuck at that 49%. Back to normal now!
Thanks alot
cambuchan said:
I registered specifically so I could post here.
I was looking for ages trying to find a fix. Always getting stuck at that 49%. Back to normal now!
Thanks alot
Click to expand...
Click to collapse
Glad it was if help for you!
Sent from my LG-D801 using Tapatalk
What fixed it for my friend was "format data," as in internal storage as well.
Thank you!
h
cheami said:
What fixed it for my friend was "format data," as in internal storage as well.
Thank you!
Click to expand...
Click to collapse
Hi, sorry for my english , I'm french
I wanted to flash a custom rom on my LG G2 D802 .
I wanted the Paranoid Android (PA +) with 4.3 JellyBean .
So I made the
Backup
Wipe data / factory reset
Wipe cache partition
Wipe dalvik Cache
After I
Choose zip ( custom ROM ) from sd card
Then I
Reboot System Now
And turn on my laptop, I get an error message saying
[640 ] started Fastboot Mode
[ 690] udc start ()
I realized I had to flash AOSP kernel before changing to a ROM paranoid . But my kernel is blocked and so I have to go back to the stock ROM
When I did this tutorial using lg tools , flashing stops at 49% with an error message .
I also saw that I could access the recovery mod by following this link http://forum.xda-developers.com/showthread.php?t=2565904(but I saw that I could not otherwise reboot my phone after it was bricking ) and therefore flash my stock Rom which I had made the backup . But I do not know if the ROM has been saved and if it remained in my files after the Wipes.
If it is not there, is that in buying a micro USB ====> HUSB adapter, I could install a stock ROM from a USB key ? Or is there a way I can put files from my computer to my laptop which has no port micro sd?
And is what I could with my kernel "blocked " ?
Thank you very much
harryleplusfort said:
Hi, sorry for my english , I'm french
I wanted to flash a custom rom on my LG G2 D802 .
I wanted the Paranoid Android (PA +) with 4.3 JellyBean .
So I made the
Backup
Wipe data / factory reset
Wipe cache partition
Wipe dalvik Cache
After I
Choose zip ( custom ROM ) from sd card
Then I
Reboot System Now
And turn on my laptop, I get an error message saying
[640 ] started Fastboot Mode
[ 690] udc start ()
I realized I had to flash AOSP kernel before changing to a ROM paranoid . But my kernel is blocked and so I have to go back to the stock ROM
When I did this tutorial using lg tools , flashing stops at 49% with an error message .
I also saw that I could access the recovery mod by following this link http://forum.xda-developers.com/showthread.php?t=2565904(but I saw that I could not otherwise reboot my phone after it was bricking ) and therefore flash my stock Rom which I had made the backup . But I do not know if the ROM has been saved and if it remained in my files after the Wipes.
If it is not there, is that in buying a micro USB ====> HUSB adapter, I could install a stock ROM from a USB key ? Or is there a way I can put files from my computer to my laptop which has no port micro sd?
And is what I could with my kernel "blocked " ?
Thank you very much
Click to expand...
Click to collapse
It sounds like you have access to recovery, so you can use adb to push or pull files from your phone. Your backup should still be on your phone, as long as you didn't wipe the internal storage.
I'd suggest pulling the important photos/videos/backup/files/etc from your phone to your computer, then wiping internal storage or wipe factory reset. Then hopefully it wont get stuck at 49%, as that is what I did for my friend's D801 to allow it to go back to stock 100%.
Exactly what i keep telling people with the same issue, Just do a full wipe in cwm/twrp before restoring to stock. the problem is allot of them can't get into recovery :silly:
Thanks for sharing! Will be useful someday
Sent from my LG G2 using Tapatalk
Posted this problem in another thread but haven't had an answer so hoping this one will help, have a vs980 with B firmware, rooted and was running cm11 Sat I installed rayglobe Rom ported to vs980 after running it for a few hours I decided to install twrp then I was gonna try phills recovery cause I was used to it, I installed freegee from the market and it ran a check and sshowed me the recoveries available for my phone, the short version is for some reason it read my phone version as the rayglobe 802 firmware and I hit install not realizing it wasn't. Reading vs980 now I have no recovery, flash tool does not work ( says wrong phone) rayglobe runs perfect but all maps dealong with root sees a 802 phone. Anyone have a idea how to fix this?
Sent from my LG-D802 using Tapatalk
quinejh said:
Posted this problem in another thread but haven't had an answer so hoping this one will help, have a vs980 with B firmware, rooted and was running cm11 Sat I installed rayglobe Rom ported to vs980 after running it for a few hours I decided to install twrp then I was gonna try phills recovery cause I was used to it, I installed freegee from the market and it ran a check and sshowed me the recoveries available for my phone, the short version is for some reason it read my phone version as the rayglobe 802 firmware and I hit install not realizing it wasn't. Reading vs980 now I have no recovery, flash tool does not work ( says wrong phone) rayglobe runs perfect but all maps dealong with root sees a 802 phone. Anyone have a idea how to fix this?
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Edit your build.prop to the correct device and install the correct recovery
Sent from my LG-D802 using Tapatalk
No clue how to do that can u use Rom manager app to do that?
Sent from my LG-D802 using Tapatalk
quinejh said:
No clue how to do that can u use Rom manager app to do that?
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Search is your friend, any app that can edit the build prop should work, please make a backup of your build prop. if you get it wrong your device will not boot.
Ok I found a thread on here about how to use file explorer to change the build prop it says there r 2 entries I need to change but my question is do I change it from d802 to vs980 or vs980b?
Sent from my LG-D802 using Tapatalk
leomd333 said:
Exactly what i keep telling people with the same issue, Just do a full wipe in cwm/twrp before restoring to stock. the problem is allot of them can't get into recovery :silly:
Click to expand...
Click to collapse
Well I could get into recovery but it did not fix the problem.
Please explain!
bri315317 said:
I just want to share my experience after a bad flash and no way to recover.
I was still able to get to TWRP. I had flashed a Rom and it went bad. Long story short. No Loki causing boot into fastboot screen.
Tried using flash tools to restore stock with kdz. No good kept stopping at 49% because it was not the expected firmware.
The fix.
Wipe system in recovery then try again. With system wiped. The firmware matches and installs as expected.
Just wanted to share my experience. Maybe it will help someone else with the same problem.
Brian
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I have same problem with my F320L. I will try your method but please explain bit more that how should i do?
In twrp, first hard reset and then do full wipe (all wipe except internal memory and do not format any thing) or describe the way please?
Thanks!
bri315317 said:
I just want to share my experience after a bad flash and no way to recover.
I was still able to get to TWRP. I had flashed a Rom and it went bad. Long story short. No Loki causing boot into fastboot screen.
Tried using flash tools to restore stock with kdz. No good kept stopping at 49% because it was not the expected firmware.
The fix.
Wipe system in recovery then try again. With system wiped. The firmware matches and installs as expected.
Just wanted to share my experience. Maybe it will help someone else with the same problem.
Brian
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
When i go to recovery mode i only have function Factory reset...
Can you help me please ?
As per the title, I accepted the system update on my rooted ls980 (didnt know it would mess anything up). Ended up putting me into a boot loop to TWRP recovery. Tried to restore all my backups and none of them yielded a different result. Thought i would try a quick wipe but i accidentally wiped everything... For some reason when i try to install the newest USB drivers it tells me the install worked but never recognized the phone. I have done all the steps in this thread http://forum.xda-developers.com/showthread.php?t=2432476 but not everything installs when plugged in from download mode. Also could not get LGflashtool to register properly. I'm not exactly sure where to go from here, I have no roms, backups, or adb access. what do?
Well if u can boot ur rom into recovery, then connect s pen drive with s flashable rom inside to ur mobile via OTG cable, and then flash
Sent from my LG-D802 using XDA Premium 4 mobile app
i had the same prob. only way out foe me was to flash via sideload
Hi guys i have *little* problem. My model is N910C.
I was flashing the new 5.1.1 firmware. Before that i was on Simple lite rom with Googy 1.8 kernel
After flashing the new firmware i stucked at boot loop. I can open download and recovery mode. Problem is: i tryed flash other firmwares, pit, factory reset, wipe data etc.... and im still at boot loop! Any ideas how to solve this problem? I'm really desperate....
Azcaron said:
Hi guys i have *little* problem. My model is N910C.
I was flashing the new 5.1.1 firmware. Before that i was on Simple lite rom with Googy 1.8 kernel
After flashing the new firmware i stucked at boot loop. I can open download and recovery mode. Problem is: i tryed flash other firmwares, pit, factory reset, wipe data etc.... and im still at boot loop! Any ideas how to solve this problem? I'm really desperate....
Click to expand...
Click to collapse
Any errors in recovery when you make full wipe?
If you have a "emmc"error ... the flash of the phone is ruined and the is no software solution for this just hardware
If the are no errors try to flash the bootloader or root the phone (it will voids your warranty)and try to flash a custom rom
If the phone is not rooted and still have warranty .. send it to cusomer service centre..it will replace the mother board
Cheers
Sent from my SM-A800F using XDA Free mobile app
God Ares said:
Any errors in recovery when you make full wipe?
If you have a "emmc"error ... the flash of the phone is ruined and the is no software solution for this just hardware
If the are no errors try to flash the bootloader or root the phone (it will voids your warranty)and try to flash a custom rom
If the phone is not rooted and still have warranty .. send it to cusomer service centre..it will replace the mother board
Cheers
Sent from my SM-A800F using XDA Free mobile app
Click to expand...
Click to collapse
I rooted my phone in day when comes so...
After i made a data/factory reset it just only write at the end: Data wipe complete. No errors in this way in recovery.
Azcaron said:
I rooted my phone in day when comes so...
After i made a data/factory reset it just only write at the end: Data wipe complete. No errors in this way in recovery.
Click to expand...
Click to collapse
Try to flash a custom rom from recovery...but full wipe after rom flash.or else you will still have a bootloop
What recovery do you have?
If you have a custom one and you did a full wipe(included sistem reset/wipe)you dont have a sistem to boot up.just put a custom rom and wipe data/cache partition and devil cache>reboot
Sent from my SM-A800F using XDA Free mobile app
God Ares said:
Try to flash a custom rom from recovery...but full wipe after rom flash.or else you will still have a bootloop
What recovery do you have?
If you have a custom one and you did a full wipe(included sistem reset/wipe)you dont have a sistem to boot up.just put a custom rom and wipe data/cache partition and devil cache>reboot
Sent from my SM-A800F using XDA Free mobile app
Click to expand...
Click to collapse
I have TWRP 2.8.7.0.
How to make a full wipe? System reset/wipe. Never tryed this...
Azcaron said:
I have TWRP 2.8.7.0.
How to make a full wipe? System reset/wipe. Never tryed this...
Click to expand...
Click to collapse
Hit advanced > sistem format>put a custom rom on sd card>flash it>reboot revocery and just wipe data factory reset and cache partition>reboot
Sent from my SM-A800F using XDA Free mobile app
God Ares said:
Hit advanced > sistem format>put a custom rom on sd card>flash it>reboot revocery and just wipe data factory reset and cache partition>reboot
Sent from my SM-A800F using XDA Free mobile app
Click to expand...
Click to collapse
Ok will try.
Azcaron said:
There is not a system format at advanced. Wtf?
Click to expand...
Click to collapse
Just install a custom rom for your phone model from recovery...if stiil wont start.go back to recovery and wife data/factory reset and cache partition.then reboot .or flash a official rom for your phone from sammobile.com section firmwares with odin(you will lose root acces if you flash a official firmware).wipe data/factory reset and cache partition every time
Sent from my SM-A800F using XDA Free mobile app
God Ares said:
Just install a custom rom for your phone model from recovery...if stiil wont start.go back to recovery and wife data/factory reset and cache partition.then reboot .or flash a official rom for your phone from sammobile.com section firmwares with odin(you will lose root acces if you flash a official firmware).wipe data/factory reset and cache partition every time
Sent from my SM-A800F using XDA Free mobile app
Click to expand...
Click to collapse
Tryed all of this... still boot loop
Azcaron said:
Tryed all of this... still boot loop
Click to expand...
Click to collapse
Read this porbably will help
http://forum.xda-developers.com/showthread.php?t=2410179
Or google search for bootloop problems and fix
Sent from my SM-A800F using XDA Free mobile app
God Ares said:
Read this porbably will help
http://forum.xda-developers.com/showthread.php?t=2410179
Or google search for bootloop problems and fix
Sent from my SM-A800F using XDA Free mobile app
Click to expand...
Click to collapse
Think i will need a visit in service cente. It looks like (and i hope it is) a soft brick but i cant deal with it in home.
Azcaron said:
Think i will need a visit in service cente. It looks like (and i hope it is) a soft brick but i cant deal with it in home.
Click to expand...
Click to collapse
You should try to:
Download SM-N910C_WanamLite.OH4_BL_Modem.tar.md5.zip and SM-N910C_WanamLite.XXU1COH4.V3.0.NO-WIPE.zip from here
Put SM-N910C_WanamLite.XXU1COH4.V3.0.NO-WIPE.zip in your external sdcard
Reboot the phone in recovery mode. From TWRP go to Wipe/AdvancedWipe/ and tick DalickCache, System, Data, Internal Storage, Cache and "Swipe to Wipe".
Always from TWRP go back to the first page, hit "Install", search for SM-N910C_WanamLite.XXU1COH4.V3.0.NO-WIPE.zip in /external_sd and install it, after Wipe Dalvick and Cache.
Reboot in Download mode
In your PC launch ODIN and put SM-N910C_WanamLite.OH4_BL_Modem.tar.md5.zip in the AP button (untick autoreboot)
Connect the phone (in Download mode) to the PC via USB cable
Let it be recognized by ODIN and hit the start button.
Once successful flash, disconnect the phone from the PC, take out the battery, put it back in and turn on the phone.
It should solve your bootloops
_mone said:
You should try to:
Download SM-N910C_WanamLite.OH4_BL_Modem.tar.md5.zip and SM-N910C_WanamLite.XXU1COH4.V3.0.NO-WIPE.zip from here
Put SM-N910C_WanamLite.XXU1COH4.V3.0.NO-WIPE.zip in your external sdcard
Reboot the phone in recovery mode. From TWRP go to Wipe/AdvancedWipe/ and tick DalickCache, System, Data, Internal Storage, Cache and "Swipe to Wipe".
Always from TWRP go back to the first page, hit "Install", search for SM-N910C_WanamLite.XXU1COH4.V3.0.NO-WIPE.zip in /external_sd and install it, after Wipe Dalvick and Cache.
Reboot in Download mode
In your PC launch ODIN and put SM-N910C_WanamLite.OH4_BL_Modem.tar.md5.zip in the AP button (untick autoreboot)
Connect the phone (in Download mode) to the PC via USB cable
Let it be recognized by ODIN and hit the start button.
Once successful flash, disconnect the phone from the PC, take out the battery, put it back in and turn on the phone.
It should solve your bootloops
Click to expand...
Click to collapse
Are you sure with : In your PC launch ODIN and put SM-N910C_WanamLite.OH4_BL_Modem.tar.md5.zip in the AP button (untick autoreboot)
Maybe thats my cause of problem, i was putting this in BL folder......im a that dumb?
Azcaron said:
Are you sure with : In your PC launch ODIN and put SM-N910C_WanamLite.OH4_BL_Modem.tar.md5.zip in the AP button (untick autoreboot)
Maybe thats my cause of problem, i was putting this in BL folder......im a that dunb?
Click to expand...
Click to collapse
When you download just the bootloader you have to put it in the BL button. But what I've linked is a modem/bootloader package and it has to be flashed from the AP button.
_mone said:
When you download just the bootloader you have to put it in the BL button. But what I've linked is a modem/bootloader package and it has to be flashed from the AP button.
Click to expand...
Click to collapse
Well maybe i messed my phone with that... bec when all of this happened, i put that in BL folder.
I'm not sure about it, but it may be the cause.
Try to follow the steps that I've suggested and let us know if you've solved your problems.
_mone said:
I'm not sure about it, but it may be the cause.
Try to follow the steps that I've suggested and let us know if you've solved your problems.
Click to expand...
Click to collapse
Right now i cant reach recovery.... when i was flashing SM-N910C_WanamLite.XXU1COH4.V3.0.NO-WIPE.zip in TWRP it froze. When i flashed 5.1.1 agan via download it stuck at instaling system update... so its messed even more
Azcaron said:
Right now i cant reach recovery.... when i was flashing SM-N910C_WanamLite.XXU1COH4.V3.0.NO-WIPE.zip in TWRP it froze. When i flashed 5.1.1 agan via download it stuck at instaling system update... so its messed even more
Click to expand...
Click to collapse
F*** sake. I'm sorry about that.
Download the right version of TWRP and flash it via ODIN (link) and try again all the steps.
EDIT:
Which version of ODIN are you using? Try to use the latest.
_mone said:
F*** sake. I'm sorry about that.
Download the right version of TWRP and flash it via ODIN (link) and try again all the steps.
EDIT:
Which version of ODIN are you using? Try to use the latest.
Click to expand...
Click to collapse
Well looks like its over, that freeze when i was flashing WanamLite ruined it totaly. Im stucked at instaling system update... cant reach recovery.
Azcaron said:
Well looks like its over, that freeze when i was flashing WanamLite ruined it totaly. Im stucked at instaling system update... cant reach recovery.
Click to expand...
Click to collapse
Is it? The phone is still in download mode stuck in installing system update?