Hi,
I have been searching for a while with no solution for this problem:
I have a I9505 Lte phone.
It's rooted and it works fine.
I also installed a custom recovery CWM. And at first it worked fine.
The problem was I could no longer get official updates OTA, then someone told me I I should try Triangle Away so I could reset the device and the OTA updates would be working again.
Triangle away reboots the phone the thing is after that reeboot I could no longer access CWM Recovery like I used to. The message: "Recovery Booting"... shows up in blue in the left upper corner of the screen and the phone turns on normally (with root), but no CWM menu shows up, ever. (No metter what buttons I keep pressed).
Can anyone help get my recovery menu back even if it is a stock recovery?
Thank You!
__Britain__ said:
Hi,
I have been searching for a while with no solution for this problem:
I have a I9505 Lte phone.
It's rooted and it works fine.
I also installed a custom recovery CWM. And at first it worked fine.
The problem was I could no longer get official updates OTA, then someone told me I I should try Triangle Away so I could reset the device and the OTA updates would be working again.
Triangle away reboots the phone the thing is after that reeboot I could no longer access CWM Recovery like I used to. The message: "Recovery Booting"... shows up in blue in the left upper corner of the screen and the phone turns on normally (with root), but no CWM menu shows up, ever. (No metter what buttons I keep pressed).
Can anyone help get my recovery menu back even if it is a stock recovery?
Thank You!
Click to expand...
Click to collapse
Turn off your Phone and wait atleast 10 sec then Hold and press Power+Volup in order to reach recovery once you see the "Recovery Booting" on top of your screen, let go both of your fingers and that should boot you into recovery . If still doenst work reflash the custom recovery such as Philz/Trwp or what recovery do you prefer and do it once again Have a nice day.
Related
Did the new update to MK2, and after I finally fixed some issues I was having with the Kies firmware update error screen, my phone was working great. I turned my phone off last night to put a new battery in, and when I turned it back on, it booted my home screen, but it was completely black. I can access the status bar, and get to the settings, but there are no apps at all showing in the application manager. It seems as if everything is missing.
I have downloaded the MK2 update, flashed it through recovery as well as adb and it still boots but everything just shows black. It won't let me flash back to MF3 through Odin. After I do a MK2 flash, it boots to the welcome screen, but when it scans for wifi, there is no keyboard to type in my password. I have skipped through that, and made it to the homescreen, but still black. Any suggestions? All help is appreciated!
I somehow got the MF3 files to flash on my phone, but now when it boots, it comes up with the "Software not authorized by Saumsung has been found on your phone". I can get to Odin mode, but when booting to recovery, the blue line shows at the top that says "Recovery Booting" then it goes to the software not authorized screen.. At the top of the software screen it says secure fail:kernel.. Can anyone tell me we what to flash to get rid of this? I feel like pulling my hair out because I've worked on it so long lol
Got a brand new vs980 from Verizon with stock OTA 24A on it. I rooted and then used the KITKAT 24A OTA FREEDOM file from this thread to try and install TWRP 2.7. It ran, asked me if I wanted to boot into recovery. I chose yes. It appeared to have worked fine. However, now my phone just gives me the ERROR: boot certification verify screen. I've tried to get into download mode, but it never makes it past the first screen (dots). It never makes it to the screen with the progress meter and the usb icon. It seems to be properly bricked. Is this thread my only hope?
C'mon guys, this is a crisis. On my way to work this morning i had to listen to the radio! Like, with commercials and stuff.
Any luck? My phone is doing the exact same thing. I can't get into download mode or fast boot. The LG sign pops up, the error flashes for less than a second in the upper left hand corner then the screen goes blank and does nothing else until I hold the power button for 10 seconds or power button + volume down key, then it just repeats the LG sign and message all over again. We're screwed brotha
Hey guys,
I have a rooted Note 3 from verizon on the hyperdrive rom. today I got a message from SUbinary (something like that) that there was an update and that I need to reboot to update. So I just clicked okay and my phone restarted. However since then I'm stuck in a boot loop with the blue message in the upper left corner saying "recovery loading.." with the note 3 white logo appearing. Then the phone vibrates twice and comes back to the same screen. I don't see the custom/lock picture like I used too. I've tried multiple times to take the battery out but no luck. I can't seem to actually enter the recovery panel at all. I've tried holding the home/power/volume up but it just starts the boot loops again. Not sure what to do. I just want to the phone to work but it seems like a hard brick?
secants said:
Hey guys,
I have a rooted Note 3 from verizon on the hyperdrive rom. today I got a message from SUbinary (something like that) that there was an update and that I need to reboot to update. So I just clicked okay and my phone restarted. However since then I'm stuck in a boot loop with the blue message in the upper left corner saying "recovery loading.." with the note 3 white logo appearing. Then the phone vibrates twice and comes back to the same screen. I don't see the custom/lock picture like I used too. I've tried multiple times to take the battery out but no luck. I can't seem to actually enter the recovery panel at all. I've tried holding the home/power/volume up but it just starts the boot loops again. Not sure what to do. I just want to the phone to work but it seems like a hard brick?
Click to expand...
Click to collapse
If you soft brick then u can only access download mode and if you hard brick then you need an expert. The problem is that verizon and at&t have locked bootloaders. Safestrap recovery is usually used there.
Can you reflash safestrap recovery via Odin ?
This link might be helpful cause im not so used to safestrap only know the basics.
Galaxy-note-3.wonderhowto.com/how-to/install-custom-recovery-your-bootloader-locked-galaxy-note-3-at-t-verizon-0156667/
If you cant access the recovery and only download mode then you have soft brick and need to reflash stock firmware.
Hi,
I have a Note 4 t-mobile that is "brick" right now. and I hope if anyone offer assistance.
It is running Android 6. Ever since the last upgrade the phone would freeze and reboot on its own. I fixed that problem by installing Wake Lock. After that it would still experience sluggish at time but the phone is still very much usable.
Lately, after watching a bit of streaming video the phone would slow down so much that a reboot is needed. But yesterday my last reboot turned my phone into a brick. After that reboot the phone rebooted itself to the download mode. So I took the battery out, waited for a few minutes and put the battery back in and started the phone. Instead of booting normally the phone displayed the message including "set warranty bit: recovery" and then followed by the flashing TWRP splash screen. By "flashing TWRP splash screen" I mean the TWRP splash screen ( with the TEAMWIN logo) would be shown on the screen for a second, then the screen black out for a couple of seconds, then the splash screen is back on for a second, and the screen black out for a couple of seconds, etc, and never successfully boot into TWRP recovery. I had left the flashing splash screen overnight and nothing changed. Connect the phone to my pc via usb and fastboot wouldn't recognize my phone when phone was flashing the TWRP splash screen. So I tried to flash TWRP again by starting my phone in download mode "volume down + power". When I connected my phone to my pc Odin recognized my phone. But when I tried to flash a custom recovery (TWRP or CWM) it seems the download started but never finished (on the phone I could see the progress bar started but never progress further).
Any suggestions would be greatly appreciated1
Additonal info
I just wanted to add that my phone is still running the stock ROM.
Problem solved
Problem solved. Once I used a different cable and the download process actually worked and I was able to flash stock ROM using Odin.
Hi Guys
I used Odin to reflash my Galaxy S10+ dual sim (duos) as it was experiencing some slowness. I used the Singapore firmware as it uses the same "G975FXXU1ASBA" model name.
The process completed successfully but when the phone boots, it gets past the Samsung logo screen and then gets stuck on a blank black screen with "Starting Android..." showing in the middle. I can swipe down from the top to show the toolbar, but it is limited in what I can select from it and the phone doesn't get to the point where the home screen boots.
I'm guessing this could be an app optimization process but after 4 hours, it was still on this screen.
I've tried re-flashing (redownloading the firmware files), clearing the cache and rebooting the phone.
Does anyone have any ideas?
In case you do want to start clean anyway, have you tried doing a reset in the recovery menu (where you are wiping the cache)? This will wipe all data.
I may have to try the full wipe, which is something I wanted to avoid but seems I have no choice.
Hopefully that at least solves the problem.
I have the same problem but I cannot get it to boot into recovery or download mode. I was flashing Magisk at the time. Odin said it worked but now it wont pass the initial stating android... Odin detects the phone but can talk to it. ADB does not even detect the phone. Phone power and reset come on. if i hold both volume the assistant comes on and if i hold bixby the safemode tag appears in the bottom corner but it still wont boot past Starting Android or boot into download mode