Hi I've been having this problem since updating to the official 4.4 KitKat for my N9005 and it has been persisting even after flashing Omega ROM as well. In my notification panel, I disabled the Brightness adjustment bar through the Samsung Settings and after a few hours, the brightness adjustment meter will appear in my notification panel again without me changing anything. Its really annoying and I'm wondering if anyone else has this problem or knows how to solve this? I have Wanam Xposed installed if it matters.
LunaMaria said:
Hi I've been having this problem since updating to the official 4.4 KitKat for my N9005 and it has been persisting even after flashing Omega ROM as well. In my notification panel, I disabled the Brightness adjustment bar through the Samsung Settings and after a few hours, the brightness adjustment meter will appear in my notification panel again without me changing anything. Its really annoying and I'm wondering if anyone else has this problem or knows how to solve this? I have Wanam Xposed installed if it matters.
Click to expand...
Click to collapse
I think you need a 'test' to have a 'control' experiment. My point is, uninstall Wanam Xposed first and see if issue is fixed, even tho, i don't think wanam should cause this, however i like the brightness option so i never tried to remove it.
If removing wanam doesn't fix it, then try reflashing ur current ROM without full wipe
If still doesn't work, reflash with full wipe
Still doesn't work? Change ROM.
And also, if you feel it is an issue in the ROM, ask in the ROM thread, you will have better luck getting a definite answer or even a fix there. Cheers!
Thanks for the reply! It actually happens both on stock NA6 and Omega so I thought it was a Stock thing but I'll try to experiment I guess.
Sent from my SM-N9005
This started happening to me too since I updated to KitKat. I'm on unrooted stock, without wanam or anything else.
Oh so this must be a Samsung thing. How irritating?
Sent from my SM-N9005
Related
I have a question, I am experiencing random freeze where my screen will just freeze, will not respond to my touches, I was on mi7 rooted it using Rdlv, then used the mobile odin method to upgrade to upgrade it to mj7 in the hope that, these freezes goes away. Afraid that the issues is still there.
From what i have seen so far these freezes happens when my signal bar is fluctuating.
i have done numerous factory resets and re flashed firmware too, yet the issue doesn't seems to go away.
Can someone please help diagnose the exact cause of this. Seems like some other people are also having the same issues
http://forums.androidcentral.com/sa...te-3-starting-lock-up-freeze-lock-screen.html
swagatsourav said:
I have a question, I am experiencing random freeze where my screen will just freeze, will not respond to my touches, I was on mi7 rooted it using Rdlv, then used the mobile odin method to upgrade to upgrade it to mj7 in the hope that, these freezes goes away. Afraid that the issues is still there.
From what i have seen so far these freezes happens when my signal bar is fluctuating.
i have done numerous factory resets and re flashed firmware too, yet the issue doesn't seems to go away.
Can someone please help diagnose the exact cause of this. Seems like some other people are also having the same issues
http://forums.androidcentral.com/sa...te-3-starting-lock-up-freeze-lock-screen.html
Click to expand...
Click to collapse
If you are still rooted you can flash this it might help https://www.dropbox.com/s/artjwhxli313f7n/V3stockui-1.zip
Hi although I am rooted, I am on stock recovery. I was wondering if I can push this into system apk and set permission. You have given me stock ui or its a new version of stock ui
Sent from my SM-N9005
swagatsourav said:
Hi although I am rooted, I am on stock recovery. I was wondering if I can push this into system apk and set permission. You have given me stock ui or its a new version of stock ui
Sent from my SM-N9005
Click to expand...
Click to collapse
Yeah it's the latest one but don't know if you can push it into system i think it's only for custom recovery so i wouldn't risk it just in case there may be a small chance it will trip knox
Knox will only Get triggered if you had custom recovery of try yo root if the bootloader is Mj7.
Sent from my SM-N9005
Do you think it's the system ui which is the cause.
Sent from my SM-N9005
Is there any way to know who the culprit is
Sent from my SM-N9005
swagatsourav said:
Do you think it's the system ui which is the cause.
Sent from my SM-N9005
Click to expand...
Click to collapse
May well be if not it could be a fault with the phone
I am almost confirmed now the freezes occur when the Phone's signal fluctuates. Not sure what is the dependency of that with the screen. Strange thing is, you can lock and unlock your screen, touch works fine, but it's after that for some time. Can some one please help me. This is driving me nuts
Sent from my SM-N9005
i am having this issue with receiving and making calls, the moment the screen is on, SystemUI will crash and reload.
The proximity sensor does not work after this, and i end up touching stuff with my cheek while talking.
I do have my doubts on xpose module S5 SystemUI Theme, but it all started randomly...
anyone having the same issue?
My Note 3 runs with Stock NG2, LeanKernel 3.6 and latest PhilZ CWM.
Yes! I have this issue as well. Not for outbound, but only for inbound. I use the Samsung flip cover, so I did not notice about the proximity sensor, but I just gave it a test and it shows identical behaviour. When receiving a call when screen is off, there is no problem at all, proximity also works.
I do not have the S5 SystemUI theme, and never used it.
Can't remember what I changed that could actually cause this. I have the following config:
Stock XXUEND3 (Latest PHN - The Netherlands firmware available)
Rooted with CF Autoroot
Running Ultimate Kernel v54 (but I had the issue already running stock kernel)
Connected with Gear 2
Frozen some Samsung bloatware with Titanium Backup
So I am following this thread!
Gerco
Well that's weird, Greenify keeps telling me it has problems hibernating com.sec.android.sviewcover, which i've disabled since i dont have one.
PS, to confirm your findings, i too had problems on stock kernel (*NG2 SEE) and i did wipe a lot of APK's, but most of them are non-samsung, i prefer RW rights over /system above scripting and debloating apps.
Do you by any chance have Xposed installed? if yes, what modules?
I've enabled the physical buttons for picking up and ending a call, if it wasnt up to them, i'd have to wait until the process re-opens so i can slide the thing...this is getting really annoying
I do have the Xposed framework loaded, with only Wanam Xposed active. I'll try to disable/remove Xposed and see if that makes things better.
<edit> Nope... Did not fix it... </edit>
Solved? I've this problem also with Galaxy S4 (I9505), i've disable Xposed, clean systemUI data, flash a stock rom (without wipe data)... still crash.
Had to wipe everything as i remember. The issue never came back.
PlutoDelic said:
Had to wipe everything as i remember. The issue never came back.
Click to expand...
Click to collapse
Thanks
Inviato dal mio GT-I9505 utilizzando Tapatalk
For me it worked again after I flashed a ROM update that became available for my region.
Sent from my SM-N9005 using XDA Free mobile app
Just a friendly heads up.
Was messing around with 4.4.4 /customizing etc. Something with the Wanam Xposed module breaks all the radios. Not entirely sure what happened, but I'm currently downgrading to 4.4.2 in an attempt to fix it. I've already done a fresh install, tried reactivating/resetting programming to no avail.
Oh well. This is why we back things up, right?
Scolias said:
Just a friendly heads up.
Was messing around with 4.4.4 /customizing etc. Something with the Wanam Xposed module breaks all the radios. Not entirely sure what happened, but I'm currently downgrading to 4.4.2 in an attempt to fix it. I've already done a fresh install, tried reactivating/resetting programming to no avail.
Oh well. This is why we back things up, right?
Click to expand...
Click to collapse
Can you be more specific? 4.4.4 couldn't be smoother for me.
jpgranger said:
Can you be more specific? 4.4.4 couldn't be smoother for me.
Click to expand...
Click to collapse
Was messing around with Wanam xposed and it borked my radios. Did a full restore to 4.4.4 and it worked again.
..went to confirm my suspicions and with Wanam and same thing happened. Could be coincidence, but when I messed with the status bar settings and rebooted, i had no radios. It would "connect" to wifi, lte, etc but data/voice would not work.
Edit: Other than that.. it's working quite well. Super snappy/responsive.
Scolias said:
Was messing around with Wanam xposed and it borked my radios. Did a full restore to 4.4.4 and it worked again.
..went to confirm my suspicions and with Wanam and same thing happened. Could be coincidence, but when I messed with the status bar settings and rebooted, i had no radios. It would "connect" to wifi, lte, etc but data/voice would not work.
Edit: Other than that.. it's working quite well. Super snappy/responsive.
Click to expand...
Click to collapse
Odd. I messed with almost every setting for the statusbar on 4.4.4. Theming didn't work at all as 4.4.4 has sewed up almost any chance of theming, but it sure didn't wreck the phone. I dunno.
I'm on 4.4.4 and I've themed and customized my status bar using Wanam and have absolutely no issues with my radios.
Y.G. said:
I'm on 4.4.4 and I've themed and customized my status bar using Wanam and have absolutely no issues with my radios.
Click to expand...
Click to collapse
Share the wealth, bro! What are you doing differently?
No matter what I try with the theming by Wanam, it won't convert upon reboot.
jpgranger said:
Share the wealth, bro! What are you doing differently?
No matter what I try with the theming by Wanam, it won't convert upon reboot.
Click to expand...
Click to collapse
I noticed that when changing the color, after changing the color, you have to press Preview then press Apply. Don't forget to make sure that the theming option is On too.
Nope. Didn't work for me. I later tried 3 different stausbar apps from the repository. Nothing.
I'm trying to simply change them to white, instead of stock grayish.
Hey guys .. Really didnt wanted to open a new thread but i was reading through many threads in the past days and didnt find a solution. Ive installed viper4android as system app and changed selinux to permissive. But it just doesnt work
Is there anybody facing the same or is there anything i missed?
Thanks in advance
This is what driver status says...
Btw im on lp 30b with stock kernel
I'm getting the same problem on my ls980 (Sprint var.)
I'm running a lollipop ROM, (Resurrection Remix)
This is in lollipop 5.1, however.
Very sad though... I LOVE viper. Probably one of my biggest reasons for root, besides custom ROMs and Xposed.
Hopefully this will be looked into.
---EDIT---
My driver status is listed as abnormal, and not enabled.
Probably means I'm even worse off than you
Collserra said:
I'm getting the same problem on my ls980 (Sprint var.)
I'm running a lollipop ROM, (Resurrection Remix)
This is in lollipop 5.1, however.
Very sad though... I LOVE viper. Probably one of my biggest reasons for root, besides custom ROMs and Xposed.
Hopefully this will be looked into.
---EDIT---
My driver status is listed as abnormal, and not enabled.
Probably means I'm even worse off than you [emoji14]
Click to expand...
Click to collapse
I'm on D802 lollipop and viper4android installed. It worked very nicely for few days. But suddenly stopped working. I've tried reinstalling many times and even added the build.prop settings mentioned in one thread.
But now it just doesn't work. The status says abnormal. And whenever I open the app, music stops playing. Hope someone can help us.
Alleks1802 said:
Hey guys .. Really didnt wanted to open a new thread but i was reading through many threads in the past days and didnt find a solution. Ive installed viper4android as system app and changed selinux to permissive. But it just doesnt work
Is there anybody facing the same or is there anything i missed?
Thanks in advance
Click to expand...
Click to collapse
Collserra said:
I'm getting the same problem on my ls980 (Sprint var.)
I'm running a lollipop ROM, (Resurrection Remix)
This is in lollipop 5.1, however.
Very sad though... I LOVE viper. Probably one of my biggest reasons for root, besides custom ROMs and Xposed.
Hopefully this will be looked into.
---EDIT---
My driver status is listed as abnormal, and not enabled.
Probably means I'm even worse off than you
Click to expand...
Click to collapse
droidfan88 said:
I'm on D802 lollipop and viper4android installed. It worked very nicely for few days. But suddenly stopped working. I've tried reinstalling many times and even added the build.prop settings mentioned in one thread.
But now it just doesn't work. The status says abnormal. And whenever I open the app, music stops playing. Hope someone can help us.
Click to expand...
Click to collapse
Check my guide for poweramp and v4a, it might just be the thing to fix it.
Thanks man. It turned out that somehow my selinux had become enforcing. Changed it to permissive and things work as expected.
Check ,,Use ,,NuPlayer'' '' in developer setting.
And install SELinux Enabler script via recovery : http://blastagator.ddns.net/dorimanx.php
Since I rooted my note 4, I have been having random freezes and it is frustrating. I installed SimplROM, Revolution, Note 5 Port ( Kyubi or something ) and finally a stock rooted rom ( bare developer's edition ) and my phone is the whole time freezing on me. I don't use social media so I am not having background heavy tasks running, always fully erased the phone's internal memory and cache before installing a new rom and yet I still get the crashes. I hve never had that before I rooted the phone. anyone experiencing this as well ?
my phone is a N910F
stilkus said:
Since I rooted my note 4, I have been having random freezes and it is frustrating. I installed SimplROM, Revolution, Note 5 Port ( Kyubi or something ) and finally a stock rooted rom ( bare developer's edition ) and my phone is the whole time freezing on me. I don't use social media so I am not having background heavy tasks running, always fully erased the phone's internal memory and cache before installing a new rom and yet I still get the crashes. I hve never had that before I rooted the phone. anyone experiencing this as well ?
my phone is a N910F
Click to expand...
Click to collapse
I am having the same problem, lagging all 5 sec when typing or swiping on homescreen. It just happens on Touchwiz roms. The Fingerprintsensor aint working either. I tried Stock Roms, Custom Roms.
Somebody said that they fixed it on the 910T with a puerto rico stockrom but no fix for 910F.
I just installed CM12.1 and no lag.
Waiting for marshmallow for fingerprintsensor support.
Hope i could help.
Akuma360 said:
I am having the same problem, lagging all 5 sec when typing or swiping on homescreen. It just happens on Touchwiz roms. The Fingerprintsensor aint working either. I tried Stock Roms, Custom Roms.
Somebody said that they fixed it on the 910T with a puerto rico stockrom but no fix for 910F.
I just installed CM12.1 and no lag.
Waiting for marshmallow for fingerprintsensor support.
Hope i could help.
Click to expand...
Click to collapse
Mine is actually working fine and it freezes without warning or in other words I can't point out exactly when it freezes, like sometimes the camera, drop down notification bar or even the task switcher. It is random, I tried yesterday some solution which I'm not sure exactly of it's outcome but so far no freezes. I changed the securestorage value in the build.prop to false which resulted in loosing my wireless password but after I retyped it again things were fine.
stilkus said:
Mine is actually working fine and it freezes without warning or in other words I can't point out exactly when it freezes, like sometimes the camera, drop down notification bar or even the task switcher. It is random, I tried yesterday some solution which I'm not sure exactly of it's outcome but so far no freezes. I changed the securestorage value in the build.prop to false which resulted in loosing my wireless password but after I retyped it again things were fine.
Click to expand...
Click to collapse
Hi,
souns like the S-Health and Privatemode error.
you fixed it with that method. You could also use the xposed module for S-Health to fix it.
Akuma360 said:
Hi,
souns like the S-Health and Privatemode error.
you fixed it with that method. You could also use the xposed module for S-Health to fix it.
Click to expand...
Click to collapse
could you please elbarate more with this xposed module fix ?