Hello everyone,
Last time I started tuning and tweaking my Omnia i900. On one of polish webpages I found thread about Andromnia. After downloading whole package and copying i to microSD card I couldn't install it. HARET is running normally, but when I click "Run" it shows something like Linux console and stops. Could you tell me what's the problem or what am I doing wrong?
PS Ask me if you will need some screenshots etc.
Thanks in advance.
Related
hey everyone. i just got my new x1 a couple of days ago and its a really kool phone.
i manage to get the roms to work and all thru the step by step guide in the ROM development sections.
but i dun understand how to install the applications. i notice they said to just run the .exe file, but my question is do i download the cab file and put it in my memory card and then run it on the x1?
sry im really slow at this. i ve been reading alot of the info here for the past days, but i couldnt find how to install the apps.
Thanks alot,
and you got roms working?
basically there are 2 types of installation 1st .cab file you install that in your phone(copy to memory card and run it) 2nd .exe you have to run this on your PC with phone connected with activesync
yea, the rom is working fine.
and thanks alot for your feed back. imma go try it now
Thanks!!
today i run the device update, it updated everything smoothly. the next time i started it i got options to download and install various programs and utilities.
i chose everything i needed and clicked install, it ran the first program alright but it got stuck when downloading the second program, so i have to disconnect the usb. i've tried changing the programs i wanted and it always happens when it reaches the second program. any ideas of what i should do?
PS: is there a way to have the device update to install everything on the storage card instead of the main memory?
Hi this may not answere your query, I just want your advice;
I hav been looking towards upgrading my herms200 from wm5 to a higher up grade ESP. 6.1. Do you have any link where pay-pal will nOt charge. Where I am, the structure of buying through pay-pal is a very long process. I tried an os called Darkwinter but it did not download fully, any ideas ?
Hi guys, i have a strange problem i looked for an answer in the forum but i didn't match anything.
I have a HD2 T-Mob with:
- hspl 3
- radio 2.15.50.
when i booted android in the past always was great! android boot and then run normally, but one day my phone with low battery shutdown with android.
Now i tried a lot of wm rom's, radio and android's build, formatted my sd with sdFormatter but NOTHING!
Android load and for only 1 sec appear then shutdown the phone.
I think that android find some file from battery check and shutdown the phone.
I have no idea how to work android on my phone please help me!
Anyone had this problem? anyone can help me?
thanks.
ps. sorry for my english but i'm italian and i don't speak english well.
sspank said:
Hi guys, i have a strange problem i looked for an answer in the forum but i didn't match anything.
I have a HD2 T-Mob with:
- hspl 3
- radio 2.15.50.
when i booted android in the past always was great! android boot and then run normally, but one day my phone with low battery shutdown with android.
Now i tried a lot of wm rom's, radio and android's build, formatted my sd with sdFormatter but NOTHING!
Android load and for only 1 sec appear then shutdown the phone.
I think that android find some file from battery check and shutdown the phone.
I have no idea how to work android on my phone please help me!
Anyone had this problem? anyone can help me?
thanks.
ps. sorry for my english but i'm italian and i don't speak english well.
Click to expand...
Click to collapse
Your English skillz are good dude. Did you try to format your SD card and copying a fresh Android build back over and starting again?
Yes i did, crisisinthecity! But nothing.
the strange thing it's that android loads and when finishes and makes data.img, the phone shutdown it self.
I have seen that in the SD there is a file of windows mobile, a sort of encryption's file, every time i formated my SD and copied on it the android directory when i loaded android at the next reboot (after the shutdown) i saw this file on the root of the SD.
please anyone know this problem?
Thanks.
Nobody can help me?
please.
Do you have a different storage card you could try? Everything works fine in Windows?
yes, i've 2 SD card, one class 4 and class 2. I tried with both, the result it's the same!
yes, on windows everythings works.
when i run clrcad.exe i run it with lights on and then tap to haret.exe! i think it's correct. i flash all my roms after task29, all my roms work correctly on my device and have no problems... I've no more ideas!
It all started when the phone is off with Android.
Now i'm trying to re-flash vbnrom and mdeejay froyo sense 2.4 but i think it isn't a rom's compatibility problem.
Hi guys, I solved my problem to run Android!
It was a stupid problem... now is perfect! I post the solution in case someone else had the same problem.
As you know there are two ways to load wm rom:
the first is via USB, the second is directly load the rom on sd and flash it from your phone without pc.
Both are successful but with a BIG difference (for me)...
If use usb method to load the rom, it created the file data.img but did not run the build of Android.
The wm rom works perfectly but android NO.
I solved it by putting the rom on sd and flash it from the phone.
Thanks to everyone for the help!
hi i have a htc hd2 on t mobile, i have downloaded nand and fully installed it and running on it, 3.2 i think, now have a small issue where i cannot download anything of market place, eg. i will click on the stuff i want click download or install and will get a message saying installing, but its not installing, will apreciate if any one can help
hi friends
I am using htc p3400i since last year nowadays from somewhere i got the wing linux option to convert the same system to android but after some process i got the massage on the screen " TSLIB calibration utilities" " touch the crosshair on the screen" but after that i am not able to touch the cross hair so at the last stage i couln't get the proccess finished so if anyone have the solution than do guide me.
thanks in advance
Are you sure that you have installed wing-linux-0.4.2-gene.cab?
yep dear
i am installing the same if you have converted the same into android than plz let me know how is it working and guide me for the procedure
thanks in advance
pranavjoc said:
yep dear
i am installing the same if you have converted the same into android than plz let me know how is it working and guide me for the procedure
thanks in advance
Click to expand...
Click to collapse
first make sure that you have atleast 650MB free space on SD card.Then install wing-linux-XXX-rootfs.cab on SD Card.It will take sometime then install wing-linux-XXX-GENE.cab on SD Card.During installation dont get your backlight turned off bcoz sometimes i have seen that it corrupts installation.Now run Winglinux from start menu.There is run button and default.txt simply press run button and wait.Then it will ask to allocate disk space dont do anything and wait.wait.....Then angstrom screen will appear.again WAIT.And finally there is touch screen calibrate screen and LoL it is working.
I don't know that why you can't touch crosshair.
Any way try again.Good luck for it.But Android is still not usable on GENE:-(
There is no sound and sometimes no network.For more go to http://wing-linux.sourceforge.net/trac/wiki/HTCGene.Do it for your Fun.
Have a nice day.