Related
Hey guys - I'm new to this forum, but I figure if anyone can help me, someone here can.
So, my bro got ahold of my phone and rooted it and installed Axura 2.2.5.9.
Since there is a newer version, I would like to throw it on and work out a few glitches and get whatever tweaks were put there.
So, how do I go about updating this thing? If anyone has the time or the patience, I would love to hear this in layman's terms.
Like:
Step 1 - download 'this file'
Step 2 - Plug phone in and drag/drop to 'folder x' on 'internal/external sd'
Etc. I came from an iPhone and all the lingo is different - like jailbreaking vs rooting. And saying "flash" instead of "load" or ROM instead of OS.
I would just like to update, but I'd liek to not be confused by all the different slang.
Thanks, anyone, for putting your 2 cents in to help a brother out.
this thread:
http://forum.xda-developers.com/showthread.php?t=849028
will answer all your questions
After you read the noob guide, feel free to PM me if you need clarification... I would also be curious to know if you think it could be improved. I wrote it trying to cater to the noob.
Just install download the rom you want on the sd (internal memory, dont save it in any folder) then boot into recovery (you should be able to do so by simply holding the power button for a second) now choose install zip from sd or sth like that and pick the rom file. The end.
Sent from my JPJPM V2 powered SGH-T959 using XDA App
full instructions easily available on the d4a site
click the link in my sig go down to vibrant section > roms> read the op
Its exactly like flashing any other rom, only difference being that you have an axuraXXXX.zip instead of ANYOTHERROM.zip
Cheers.
Just remember to backup your apps, since the new rom will wipe your phone.
To be safe, you may want to make a nandroid backup in CWR... always nice to have something to fall back on.
The guide has more detail like these steps, but yes, everyone is right in saying just download it and flash it. I think it's important to backup everything.
The Noob Guide is really well written. My problem now is I cant find the file to download!
A Rom you mean? You can find those in the development forum along with other tools you may need to run/flash it.
Here's a link just in case you don't know where that is
http://forum.xda-developers.com/forumdisplay.php?f=711
Yes, the ROM. I went to the daily bible thread and tried to click "Download" on the Axura subsection. It gave me an "Error 404 - file not found".
Just open one of the threads in the form link I just gave you and look for the ROM you wanted, then check the first post there for the download link.
I did that. That's when I get the Error 404.
http://forum.xda-developers.com/showthread.php?t=949372
They must have pulled that rom of the server or the host did that. Just go for another one, plenty of options out there and quite frankly Axura isn't exactly the most sought after roms around here.
Axura is truly in need of a 2.2.1 update, but seeing as though Master is happy with his Nexus, it will never be getting one. And quite frankly, Eugene's gingerclone roms, trigger, or any of the i9000 ports run much smoother to me.
Ding forget he has also gotten a thunderbolt, I thought about picking up dev on axura but I have no where near enough time to mess with it, but I agree axura is in dire need of an update to 2.2.1
This post Trigger'd by my Vibrant
THANKS GUYS
I just got Trigger and so far so good.
My only issue is that I couldnt figure out how to restore my apps in Ti. Looked like there were 0 files backed up. Oh well. One at a time.
Hey NOOKERS!
Got my wife a nook for Mothers Day. Had to fly out of the country the next day and never got around to doing more than charge it up for her.
She does not want to touch it until I can "hack" it to allow it to be an android tablet with both B&N books and Kindle, plus of course all the web browsing / music playing stuff.
I'm fairly comfortable, having messed with both my Samsung Moment and my Epic too.
But -
Is there a guide? Step by Step to go from a STOCK 1.2 device to Cyanogenmod7, and then back again if she hates it and I need to return it?
Interested in getting an answer on this too, particularly if there is a way to reverting back to stock, even tho I already rooted with manual nooter then flashed CM7.....
And so I guess... we WAIT.
Bigjohn_S said:
And so I guess... we WAIT.
Click to expand...
Click to collapse
Getting back to stock should be as simple as building a CWR bootable SD card with one of these images:
http://mrm3.net/nook-color-updated-clockwork-recovery-bootable-sd/
Then booting into CWR, formatting the applicable partitions, flashing the stock 1.2 Rom that's been posted in this thread:
http://forum.xda-developers.com/showthread.php?t=1050520
Now, I'm pretty new to this stuff, but I think that should work. I installed Phiremod on my NC this weekend following the above procedure.
Thanks for the links, and I'll surly look at them - but I can't afford an "I think it should work".
I need steps that WILL work (unless I pour coffee into it while I'm doing the process...)
You should install CM7 on a bootable SD card. http://forum.xda-developers.com/showthread.php?t=1000957
If you don't like it, remove the card, and you are back to stock.
Bigjohn_S said:
Thanks for the links, and I'll surly look at them - but I can't afford an "I think it should work".
I need steps that WILL work (unless I pour coffee into it while I'm doing the process...)
Click to expand...
Click to collapse
Post #4 from my second link gives instructions:
http://forum.xda-developers.com/showpost.php?p=13200403&postcount=4
Basically same thing I told you.
Ok. trying it from an SD card.
Question - if I want to go ahead and Root/Install this to the NOOK itself, can I somehow keep all the setup that wife does to the OS on the SD card?
I can wright a guild tonight some time and post it up I have done this a ton of times back and forth from 1.2/cm7 and dual booting cm7 and 1.2 lol my nook has been all over the place... lol I'm a flashaholic
Thanks to all who contributed!!!
n0xx187 said:
I can wright a guild tonight some time and post it up I have done this a ton of times back and forth from 1.2/cm7 and dual booting cm7 and 1.2 lol my nook has been all over the place... lol I'm a flashaholic
Click to expand...
Click to collapse
Looking forward to seeing it!
Wife is loving it, but now I guess I want to take what she's been playing with and put it on the "device" instead of the SD card, so she can use the SD card to store music and other stuff.
But I really do need the "set it back to normal" capability too, so that if the damn thing messes up horribly some how I can get it warranty repaired. I just don't have that kind of free $ to "throw it away"...
@n0xx187 -
Any update on your little guide?
Thanks!
Hey amigo... just checkin in to see how that guide is coming!
I'm looking forward to seeing a guide as well since I've forgotten the steps I took with my Nook pre-1.2, and am ready to install CM7 on a Nook for my friend.
For instructions on how to install CM7 on your internal drive in the Nook (EMMC):
http://forum.xda-developers.com/showthread.php?t=1030227
Also contains a link to the directions to restore your nook to stock 1.2 (there is a different guide for previous revs, but you said 1.2):
http://forum.xda-developers.com/showthread.php?t=1050520
The two zips linked there differ in that 1 uninstalls CWM assuming you have it flashed to EMMC, and the other doesn't.
I've used both guides (installed CM7 to EMMC, reverted to stock 1.2 and removed CWM, installed a different nightly of CM7, etc) and they are straightforward and take you every step of the way as long as you understand the terminology involved (emmc vs SD) and can follow directions without skipping steps.
If you are wanting to dual boot that is a completely different beast and there are threads for it in the Development sub-forum here.
Just a caveat - you won't be able to use the B&N native ereader app in CM7, and the nook for android app is having some issues right now that haven't been corrected yet (menu insensitivity, some people report that syncing to their library is failing), so if that's important to your wife that's a consideration vs rooting stock B&N (that in and of itself has issues just like any of the roms for the Nook Color, you can read up on them in their own threads (manual nooter, mini nooter, autonooter, etc))
angomy said:
For instructions on how to install CM7 on your internal drive in the Nook (EMMC):
http://forum.xda-developers.com/showthread.php?t=1030227
Also contains a link to the directions to restore your nook to stock 1.2 (there is a different guide for previous revs, but you said 1.2):
http://forum.xda-developers.com/showthread.php?t=1050520
The two zips linked there differ in that 1 uninstalls CWM assuming you have it flashed to EMMC, and the other doesn't.
I've used both guides (installed CM7 to EMMC, reverted to stock 1.2 and removed CWM, installed a different nightly of CM7, etc) and they are straightforward and take you every step of the way as long as you understand the terminology involved (emmc vs SD) and can follow directions without skipping steps.
If you are wanting to dual boot that is a completely different beast and there are threads for it in the Development sub-forum here.
Just a caveat - you won't be able to use the B&N native ereader app in CM7, and the nook for android app is having some issues right now that haven't been corrected yet (menu insensitivity, some people report that syncing to their library is failing), so if that's important to your wife that's a consideration vs rooting stock B&N (that in and of itself has issues just like any of the roms for the Nook Color, you can read up on them in their own threads (manual nooter, mini nooter, autonooter, etc))
Click to expand...
Click to collapse
Thanks. The wife has hundreds of KINDLE books, has yet to buy one from B&N. The purpose of this process is to enable BOTH on this cool little device.
And the "guide" we've been looking for is "How do I take what's installed on the flash card" (she's been using CM7 from a 2gb flash) and MOVE it to the EMMC. (and of course, return it to stock if something goes wrong in a horrible way.)
John
Bigjohn_S said:
Thanks. The wife has hundreds of KINDLE books, has yet to buy one from B&N. The purpose of this process is to enable BOTH on this cool little device.
And the "guide" we've been looking for is "How do I take what's installed on the flash card" (she's been using CM7 from a 2gb flash) and MOVE it to the EMMC. (and of course, return it to stock if something goes wrong in a horrible way.)
John
Click to expand...
Click to collapse
Ah, I had read your OP and assumed things hadn't changed (my bad, read further down and saw that you installed CM7 to SD).
In this case, you could use Titanium Backup to back up all the apps + app data and restore them to the new install on EMMC - I wouldn't back up system data however. It would require minimal re-setup (cyanogenmod settings, some system settings) but would retain launcher settings (desktop, status bar, dock, etc) because the app info would be saved in a backup. You would have to copy separate user data manually (e.g., transferring folders in USB storage mode to your PC and back to your Nook after installing CM7).
I do not know if a nandroid backup / restore would work if you are switching from CM7 SD to EMMC. I prefer using TiBu since youc an choose to transfer only apps + app data on a fresh CM7 install.
dsf3g said:
Now, I'm pretty new to this stuff, but I think that should work. I installed Phiremod on my NC this weekend following the above procedure.
Click to expand...
Click to collapse
If you're running a NOOK Color with 1.2, didn't you run into "error formatting /data"? If so, how did you get past it?
Mine came with the original 1.1 firmware., which I updated to 1.2 from the downloaded file...
but I am hearing things about re-partitioning and things on new ones... does that impact "upgraded" ones?
I have a new Nook Color that I tried to turn into a tablet using a guide on another site. I don't know what I messed up or where but instead of only having the new OS on the memory card it overwrote the Nook itself.
After I start the Nook Color it says Welcome to LogicPDZoom2 and wants me to to some setup.
I want to revert this nook back to how it was from the factory so I can restart the entire process after reading how here.
Will someone with compassion help me out?
You're new here, but you'll see this reply a lot. Please search before you post new threads...please. You'll find your answer mapped out in perfect detail in the thread below, which I found by searching the words restore and stock.
http://forum.xda-developers.com/showthread.php?t=931720
On a more friendly note, welcome aboard, I think you'll find the nook color to be a magnificent piece of equipment. When you're ready to venture into something better than stock again I'd recommend using the guide below to try out CM7.
http://forum.xda-developers.com/showthread.php?t=1030227&highlight=install+cm7
Don't be afraid to play a little as your confidence grows, the nook is pretty much unbrickable, and there are some beautiful technical minds in this community who have enabled us to do wonderful things.
I saw that thread but it references NC 1.0.1 and I was not sure if it was safe to use 1.0.1 on a 1.1.0 system. I'm still holding off until I can find a 1.1.0 image.
ElevyNJ said:
I saw that thread but it references NC 1.0.1 and I was not sure if it was safe to use 1.0.1 on a 1.1.0 system. I'm still holding off until I can find a 1.1.0 image.
Click to expand...
Click to collapse
Doesn't matter which stock you install, as you will get the 1.2 update (or you can go to B&N and download it manually).
That is very good to know. I was afraid of causing more issues by putting an older stock than it shiped with on it.
I was able to do the reversion and update the system to 1.2 and then install Cyanogen 7 onto a memory card but I'm getting timeouts
The time outs seem cusred by switching from a 16GB PNY card to a 16GB Sandisk card
Newbie here - used search feature, searched across forums. Did not find my problem addressed.
Putting CM7 on wife's NC 1.2.0. Followed huskermania's steps exactly. Everything installed fine until I got to the part where I selected format data. Then I received message, "error formatting data!" Everything stops right there and I have to power the unit down.
Re-downloaded the file twice - went through the complete process two times across several different times so as to avoid frustration causing more trouble! Using a Sandisk 8g class 4 card.
Using 7zip, cm7.0.3, and win32diskimager, and google add-ons, downloaded as directed by the husker dude.
In one section of his video, Huskermania moves files to the mSD - his files are shown as yellow folders. Mine show up as a small stack of books. When I look at the properties of my files, they are winrar zip archive files.
Please help! I'm so close!!
Thank you,
Jim
I believe your issue has been addressed more than one, maybe not exactly the same but pretty close.
Anyway, your NC is v1.2.0, often called "blue dot" which B&N decided to change the partition mapping, used to be 1GB /data & 5GB /media in v1.1, now be 5GB /data & 1GB /media in v1.2.0.
If you don't have a bootable uSD card with CwM Recovery 3.2.x.x or above, it will give you that error "cannot format /data". However, in my specific case, I did have the issue but my NC actually continued to next step, not hung and no need to force reboot.
I suggest you get the newer CwM (v 3.2.0.1) and give it a try again.
Votinh,
Thank you for your reply. As I learn, I am finding that sometimes I don't understand what to ask to find the solution!
I will try this today and report back.
Thank you again,
Jim
Wait!
I checked the version of the file I had used to install cwr and it is 3.2.0.1 - the same file that I was encouraged to try. To be more precise, it is "recovery-clockwork-3.2.0.1-bravo.
So, I'm still stuck.
HELP!
Thank you,
Jim
Can't offer anymore help, m8 but I don't think you should be panic.
If I were you, I would try to re-partition/re-format to 1GB /data 5GB /media, then using CwMR v3.0.2.8 and try again.
Great! Now, can you tell me how to do that?
Thank you,
Jim
I would suggest reading This first. Important info if you are going to muck around in the internal memory partitions.
Then I would go Here and see if this will help.
If not, This, This, or This might be your next best steps as far as reading and/or trying.
Also, This Sticky could shortcut you to the solution you need.
All these links go to XDA threads here in the Nook Color forums. They aren't all the recovery threads, but most of the more recent ones that could help you.
I haven't had to deal with what you're trying to handle, but this should be a great start/solution to solving your problem.
It's gonna take some reading and absorbing to comprehend what you're trying to accomplish, given the level familiarity you seem to have with your device and it's internal file structure.
(I mean no slight by this, the fact that you are here trying to learn and figure out your issue says much - welcome to the community btw )
Tcandroid,
Thank you for your input. I solved the problem by following votinh directions about partitioning. I'm finally up and running cm7!
Two concerns remain:
1. Do I need to worry about OTH updates from barnes and noble messing up my efforts? My hunch is no, just want to make sure. If so, how do I turn that off?
2. Can I over clock to 950 with what has already been installed, or do I need to download and install something else?
Thank you all so much!
Jim
Jim1970 said:
I'm finally up and running cm7!
Click to expand...
Click to collapse
This put a smile on my face, i'm glad to hear you got your issue resolved.
Nothing worse then having a wonderful piece of technology right in your hands that you can't use.
I have no doubt you are going to have a blast with it.
Cruise through the 'themes and apps' subforum here in Nook Color Forums, and you'll find some gems that are out there in the market.
I am not sure about the answers to either of your questions, but I do know that:
Some people have had to do some funky things to block B&N updates, and there have been conflicting answers on this. Again, only have seen in passing - so not sure what the whole story is here.
B&N doesn't push updates that often, so it's likely you have some time to figure this out.
I see people mentioning overclocking to 1200 a lot, so 950 shouldn't put too much stress on your machine. Depending on what version of CM7 you are running, you shouldn't use an external app to overclock. I've been using mine at the standard 800 and can play games like Samurai 2 (with chainfire installed) and it's no problem for the machine.
If your CM7 version provides you overclock settings, use those and not an outside app like SetCPU.
Some random info gleaned from browsing through this forum. Not too specific in addressing your query, yet maybe helpful in your continuing Android education.
Jim1970 said:
Tcandroid,
Thank you for your input. I solved the problem by following votinh directions about partitioning. I'm finally up and running cm7!
Two concerns remain:
1. Do I need to worry about OTH updates from barnes and noble messing up my efforts? My hunch is no, just want to make sure. If so, how do I turn that off?
2. Can I over clock to 950 with what has already been installed, or do I need to download and install something else?
Thank you all so much!
Jim
Click to expand...
Click to collapse
I help many people in many threads and tend not to remember the OP's original issue, so I have to re-read again
Firstly, congrats to you, do enjoy the NC running CM7. I bet by now, you are not a noob or newbie anymore, experience learnt.
Secondly,
1. since the NC is running CM7 ROM now, you don't have to worry about anything from B&N, even their new release probably won't be as good as the CM7.
2. by default, CM7 comes with kernel that can be overclocked to 925MHz (at least true on the v123 nightly build, not sure the latest) and again, it runs at 800MHz by default. You can set it under ??? (not on top of my head now and I don't have the NC in front of me, will update later).
If you want to run faster than 925MHz, you must install Dalingrin latest work - build on 06302011. Be sure download the "emmc" version since you run the CM7 off the internal memory.
Hi everyone,
I'm new to this and sorry if some of my questions are redundant, but can anyone tell me their experiences with hacking the Nook Color? I'm still deciding on getting it and I want to put Cyanogenmod 7(Gingerbread) in it( if I buy one), but I'm not 100 percent sure. Can someone tell me if it's easy, hard, any complications, etc? Also any links or information on how to dual boot it( is that the one where it doesn't void your warranty?) would be greatly appreciated.
Sorry for all the noobness.
Welcome! There are a lot of threads here and in the Android Development sub-forum on getting started along with answers to most of your questions. See this post of mine for links on getting CM7 installed:
http://forum.xda-developers.com/showthread.php?p=16779145#post16779145
Frankly, everyone here will say that the nook is pretty awesome, especially with CM7. It's quite easy. The first time you install it might take a while (under 1 hour easy), but after a while it could really be done in a few minutes. At this point you just need to copy files mostly. Technically, I think running CM7 could void your warranty, but that said, the Nook is nearly unbrickable. You can pretty much always restore to stock if need be. The safest way to get started is to follow the SD card method from the link above.
Good luck!
It's just like learn how to swim or learn how to ride a bike.
No one ever able to do and do good first time, it takes time, always.
Someone picks things up fairly quick, some others learn at slower pace but they all get better at some points.
The only requirements are able to read and understand English and able to follow the instruction then you're off to go .......... and go far.
Lastly, if I can do it, you can do it.
Look into starting from the SDCard install options, before overwriting internal memory. If something goes wrong, you simply power off, remove the SDCard, and power up again, and you have your stock Nook Color working perfectly.
In my sig, click the link to "SD Install" for the best way to prep the MicroSD card for whatever ROM you want.
I highly recommend CM7, it's simply the best thing going for it. Again, installing to the MicroSD card is a painless way to test it out, links in verygreen's thread.
Make sure you have a SanDisk card, links in my sig to find out why if you're curious.
To this day, I still have my stock Nook Color B&N software updated and running on the internal memory - but for the life of me I can't figure out why I haven't taken the step to move CM7 to internal at this point. It's that good.
Point being, with a SanDisk MicroSD card, and CM7 installed to it, you really unlock the powerful user experience this device is capable of. Best part is, it's not a permanent thing. You simply power off, remove the MicroSD card, then power back up and you are back to stock.
Easy, painless, and tons of fun.
Thank You so much everyone for the responses. Sorry if I took too long to reply. I'm going to read over the directions right now Oh and do anyone have the list of some of the words? I'm still new to this and I don't know what "partition" or "kernel" means.
partition = dedicated space for specific usage.
kernel = sets of drivers, it is a brain of the ROM
i was a new nook owner and new to rooting as well. i had no trouble with following instructions and have been very happy with the outcome. it also helps to read a lot of other posts to see what issues may arise and how to fix things. as long as you can follow instructions properly its a breeze
Thank You all so much. I got one more question, I've been reading somewhere online that it's possible that you can go back to the original version of the nook without having to remove the SD card, and I just want to confirm if this is possible? If it's can you give me a link? Thank You sorry for so much question
Marid said:
Thank You all so much. I got one more question, I've been reading somewhere online that it's possible that you can go back to the original version of the nook without having to remove the SD card, and I just want to confirm if this is possible? If it's can you give me a link? Thank You sorry for so much question
Click to expand...
Click to collapse
On the newer nightlies, you can press the nook 'n' button while the first green cyanogenmod logo is showing and it will take you to a boot menu. You can then select to boot from emmc (internal) or the sd card, and also choose normal or recovery mode.
Sorry about this but 1 more small question, will bn update( i think ota) affect the rooted nook? If so, can you tell me how to fix it?