While trying ti install CM 11 from TWRP i managed to brick the phone. I dont want to waste time sharing the details unless it's need to solve the problem. The main thing is that my phone is now stuck at the LG logo. Previously i was running the CM 10.2 Stable Build.
How can i get back to working condition? Either CM or Genuine LG Rom, I just want my phone to be up and running.
Please Help. I am really scared at this moment.
You don't share any details so I have to guess...
Enter recovery like this http://www.youtube.com/watch?v=ifi-ArGeTzQ , restore your Backup or flash another ROM, done.
muEcke* said:
You don't share any details so I have to guess...
Enter recovery like this http://www.youtube.com/watch?v=ifi-ArGeTzQ , restore your Backup or flash another ROM, done.
Click to expand...
Click to collapse
I can enter both the modes shown in the video.
The thing is i was running CM 10.2 with a TWRP installed of version 2.6.3.2. I downloaded the CM 11 and went into TWRp to flash it but it couldnt flash the CM11. Then after searching the net i found out that TWRP 2.6.3.3 or higher is required to install CM11. The problem is that i wiped my dalvic, data, cache and system and did not keep a backup. So when the Cm11 wont install i was stuck in the TWRP as i didn not have the 10.2 rom file in the phone.
Then downloaded the TWRP 2.6.3.3 and also a CWM zip (just in case). Using ADB i tried to update the TWRM but still some other error shows up. Tried installing the CWm still some error shows up. i tried installing again and this time the recovery asked me to install superuser (though i was rooted). I selected YES and after that i am boot looping in the lg logo.
Anyways thats basically what happened. Now how do i get further and make my phone work again?
Please help brother. I am in deep trouble.
Thank You
Man... always keep a backup, you know, just in case
Shouldn't be a problem at all. You have ADB access right? So here is TWRP 2.6.3.4 those are flashable ZIPs.
Push the file, flash with recovery, reboot to recovery again and you should be on 2.6.3.4. Then flash CM11 and you are good to go...
http://forum.xda-developers.com/showthread.php?t=2469995
muEcke* said:
Man... always keep a backup, you know, just in case
Shouldn't be a problem at all. You have ADB access right? So here is TWRP 2.6.3.4 those are flashable ZIPs.
Push the file, flash with recovery, reboot to recovery again and you should be on 2.6.3.4. Then flash CM11 and you are good to go...
http://forum.xda-developers.com/showthread.php?t=2469995
Click to expand...
Click to collapse
But I am stuck in the LG logo now as i mentioned. I cannot access custom recovery mode (as in TWRP).
in_core said:
But I am stuck in the LG logo now as i mentioned. I cannot access custom recovery mode (as in TWRP).
Click to expand...
Click to collapse
So you can't enter the recovery like shown in the video? And the command adb reboot recovery doesn't work either?
At this point your only option is to return back to stock and start over but with a recovery from the link I provided in the other thread.
http://forum.xda-developers.com/showthread.php?t=2432476
LG G2 Stock Firmware (Go Back to Stock)
Follow the instructions in this thread
Sent from my LG-LS980 using Tapatalk
hellot1M said:
At this point your only option is to return back to stock and start over but with a recovery from the link I provided in the other thread.
http://forum.xda-developers.com/showthread.php?t=2432476
LG G2 Stock Firmware (Go Back to Stock)
Follow the instructions in this thread
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Ok then i will follow this process and hopefully be successful in getting my phone up and running.
Thanks for the help. Downloading 2Gb will take some time. So will post the result tomorrow.
Regarding rooting and installing custom recovery again, i will do that later. For now i just want my phone alive.
Anyways Thanks again everyone for the helpful information
Try getting to download mode right now. Because if you can't get to download mode you can't use the back to stock method
from my Note Thrizzle
Thanks everyone for the help and support. I have successfully reverted back to Stock LG Firmware.
I have some questions.
1. Do i have root access anymore?
2. Is my previous custom recovery still in my system?
3. If no for both then please help me with the appropriate article to root, install custom recovery and then install CM11, as my previous recovery was not able to install CM 11.
Thank You
Hello,
I tried to update my LG G2 D8002 to the latest Cyanogenmod Kitkat Snapshop and i stuck in clockworkmod recovery loop after returning in CWM to take backup. I tried to connect it to my Laptop but i cannot have any access in my files via my laptop. I tried to restore in other backup versions that i have already in my device and the same thing it happens. Do you have any idea?
Thank you very much.
airvag said:
Hello,
I tried to update my LG G2 D8002 to the latest Cyanogenmod Kitkat Snapshop and i stuck in clockworkmod recovery loop after returning in CWM to take backup. I tried to connect it to my Laptop but i cannot have any access in my files via my laptop. I tried to restore in other backup versions that i have already in my device and the same thing it happens. Do you have any idea?
Thank you very much.
Click to expand...
Click to collapse
Try this. It worked for me
http://forum.xda-developers.com/showthread.php?t=2451696
ScottsoNJ said:
Try this. It worked for me
http://forum.xda-developers.com/showthread.php?t=2451696
Click to expand...
Click to collapse
The problem is that i do not have any access in adb or any step of the process i m missing. Can help anyone? Because after rebooting the system i stuck in the CWM and this situation looping every time.
So I installed CM11 on my LG G2 (d802) but I made a backup before I installed CM11.
I didn't like it so I restored my backup. Everything was working fine.
I got a notification that there was an update, so I installed that and after it was going to reboot, my phone booted into recovery(TWRP v.2.7.0.0)
I tried to install the backup again, but it also rebooted into recovery. Same thing happend if I wanted to install CM11 again.
I want to install the stock firmare using Flashtools but my phone doesn't boot into DOWNLOAD mode
If someone could help me out, that would be awesome!
Thanks
LMH1998 said:
So I installed CM11 on my LG G2 (d802) but I made a backup before I installed CM11.
I didn't like it so I restored my backup. Everything was working fine.
I got a notification that there was an update, so I installed that and after it was going to reboot, my phone booted into recovery(TWRP v.2.7.0.0)
I tried to install the backup again, but it also rebooted into recovery. Same thing happend if I wanted to install CM11 again.
I want to install the stock firmare using Flashtools but my phone doesn't boot into DOWNLOAD mode
If someone could help me out, that would be awesome!
Thanks
Click to expand...
Click to collapse
have you tried this http://forum.xda-developers.com/showthread.php?t=2451696
XxZombiePikachu said:
have you tried this http://forum.xda-developers.com/showthread.php?t=2451696
Click to expand...
Click to collapse
Thanks a lot!
Hey guys I'm in trouble. I can access TWRP but get a bootloop if i try to start up.
I will try to make this as clear as possible and go through the steps in order to get you guys the best information to help me fix this.
First of all I don't know how to use adb so treat me like a noob if you talk to me about it. I know I have it but when i try and open it the console flashes then exits.
I have sprint so the ls980
So i started on 4.2 and wanted to upgrade to a KK rom. I chose CloudyPro.
So i flashed TWRP[2.6.3.0] (sprint ls980 version) with flashify and it seemed to work.
Did my backups and full wipe
Then I flashed the 4.4 baseband through TWRP
Then flashed cloudyPro and it said successful (although it said something about a meta data recursive error)
After trying to boot up it went to the LG boot screen then back to TWRP.
Any help would be truly appreciated. Sorry if I come off as needy but I'm scared lol.
Axe-08 said:
Hey guys I'm in trouble. I can access TWRP but get a bootloop if i try to start up.
I will try to make this as clear as possible and go through the steps in order to get you guys the best information to help me fix this.
First of all I don't know how to use adb so treat me like a noob if you talk to me about it. I know I have it but when i try and open it the console flashes then exits.
I have sprint so the ls980
So i started on 4.2 and wanted to upgrade to a KK rom. I chose CloudyPro.
So i flashed TWRP[2.6.3.0] (sprint ls980 version) with flashify and it seemed to work.
Did my backups and full wipe
Then I flashed the 4.4 baseband through TWRP
Then flashed cloudyPro and it said successful (although it said something about a meta data recursive error)
After trying to boot up it went to the LG boot screen then back to TWRP.
Any help would be truly appreciated. Sorry if I come off as needy but I'm scared lol.
Click to expand...
Click to collapse
try to use this procedure http://forum.xda-developers.com/showthread.php?t=2432476
I made a mistake and could use your help...
I have a Verizon LG G2 it is rooted and I tried to install clockworkmod recovery and it wouldn't boot to recovery just the stock recovery. So.. I installed TWRP and flashed that recovery. Now I have no recovery. Phone locks up when I try to boot into recovery. How do I fix this? I am trying to ditch the stock Rom. Whats the easiest solution to flash over everything with a new Rom without using recovery? Or how do I get a Recovery working.. I never used a PC to flash before... I am a computer geek tho so with some guidance I should be able to hopefully fix this.
225719 said:
I made a mistake and could use your help...
I have a Verizon LG G2 it is rooted and I tried to install clockworkmod recovery and it wouldn't boot to recovery just the stock recovery. So.. I installed TWRP and flashed that recovery. Now I have no recovery. Phone locks up when I try to boot into recovery. How do I fix this? I am trying to ditch the stock Rom. Whats the easiest solution to flash over everything with a new Rom without using recovery? Or how do I get a Recovery working.. I never used a PC to flash before... I am a computer geek tho so with some guidance I should be able to hopefully fix this.
Click to expand...
Click to collapse
autorec
http://forum.xda-developers.com/showthread.php?t=2715496