Trying to install CM11 on Note 3 international Qualcomm. Rooted with CF-Autoroot, flashed TWRP with Recovery Tools and then booted into recovery and wiped everything and installed CM11 nightly from SDCARD. It came up as 'FAILED'.
I did a backup but internal storage is not showing up and I wiped it afterwards. I have backed up original recovery.
I also tried flashing a previously nightly with no luck. Also tried flashing this: [OnLine][07.02.2014] X-NOTE build 9.0 N9005 NA7 4.4.2 - flashes successfully but does not boot from samsung splash screen.
I was on stock 4.3 prior to doing any rooting etc..
How do I get back to stock 4.3 or successfully install 4.3?
Thanks in advance.
Can't get back to 4.3 once you've upgraded your boot loader - which it appears you have done with x note 9. look at the TWRP thread and get the version for KK and it should work.
If by some reason your BL hasn't upgraded, then just flash a 4.3 rom.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Related
Hey, hope everyone is having a good long weekend. I have a Bell S4 that refuses to boot any 4.3 ROM. I have tried at least 6. I made sure they were all jfltecan (jfltexx ROMs also work), wiped everything, flashed the ROM, flashed 4.3 gapps, wiped cache and dalvik and rebooted. It shows the Galaxy S4 screen then just goes black. Anyone else experiencing this?
What recovery are you using. There are new versions to flash 4.3
I'm using PhilZ Touch 5 because TWRP takes anywhere from 1-3 minutes to pass the TWRP opening screen.
Use TWRP 2.5.02
Sent from my SGH-I337 using XDA Premium 4 mobile app
TWRP won't even go passed the Teamwin screen anymore. It will sit there till I turn it off.
I was having the same issue earlier. Just installed Philz recovery because TWRP 2.6 was taking so long to come on or flash anything. Received the same black screen after flashing multiple roms. I had an old TWRP 2.5 flashable zip file and flashed it from Philz, pulled battery, rebooted to TWRP again, flashed 10.2 nightly and Gapps and it worked.
If you are still having the same problem, let me know and I'll upload the file for you for the TWRP flashable zip.
Thanks & good luck!
Hey,
Today in between flashing a new ROM i went back to 4.2.2 cm10.1.2, just to check some things out before flashing a 4.3 ROM that i was intending to do in the first place.
However after having reverted to 4.2.2 when i went and install the 4.3 ROM i noticed i had no signal, since then i've tried flashing the radio and boot from 4.3 Factory Image via fastboot, tried installing a different 4.3 ROM, all with no success.
What can I do?
Btw i still get signal in 4.2.2
Thanks.
Mottz said:
Hey,
Today in between flashing a new ROM i went back to 4.2.2 cm10.1.2, just to check some things out before flashing a 4.3 ROM that i was intending to do in the first place.
However after having reverted to 4.2.2 when i went and install the 4.3 ROM i noticed i had no signal, since then i've tried flashing the radio and boot from 4.3 Factory Image via fastboot, tried installing a different 4.3 ROM, all with no success.
What can I do?
Btw i still get signal in 4.2.2
Thanks.
Click to expand...
Click to collapse
Check APN settings?
How do I do that?
Also the phone app just crashes totally when I try to do anything with it, even entering airplane mode triggers that.
Sent from my Nexus 4 using Tapatalk 4
You should do a clean wipe before you flash 4.3 from an older version, do a factory reset and wipe the system partition, then flash 4.3 rom.
via xda app
It might have to do with TWRP.
http://forum.xda-developers.com/showthread.php?p=45323439
Try flashing TWRP 2.6.0.0 then proceed from there to flash your rom.
I guess i forgot to mention, i did a clean install, i factory reset before reverting.
And i have TWRP installed, I've tried several ROMs and in all of 4.3 ROMs i dont have signal and the Phone app FCs when i try to use it.
On that note, does TWRP Factory Reset wipes System Partition?
Factory reset does wipe system partition except /data/media.
Flash TWRP 2.6.0.0 (this version)
Factory reset
Flash Rom
Flash Gapps
Flash Modem
Flash Kernel
Flash Supersu
Wipe caches
Reboot
Btw, here is some insight on what to wipe in TWRP:
http://teamw.in/whattowipe
Oh I just saw your previous post, didn't understand it at first but now that I think about it I do actually have 2.6.1.0.
Ill try what you said and report back.
Thanks.
Sent from my Nexus 4 using Tapatalk 4
It worked, thanks alot!
I recently got a nexus 7 2012. I unlocked it and installed the custom recovery (CWM) according to the guides given in the forum and elsewhere. The problem comes when I install a custom ROM like CM10.2, It installs fine, but the boot does not resume after the CM animation. I tried another rom like AOKP and even TWRP as recovery, still the problem persists. My bootloader is 4.23 and flashing back to stock ROM works as normal. Please help.
What recovery you use. And what tool you use to root. For I use WUG toolkit. And install TWRP. And install CM 10.2 with no problem. Maybe you not really root. Update your superuser before that
Sent from my Nexus 7 using XDA Premium 4 mobile app
Stupid question: are you sure you are flashing grouper ROMs?
Tried a lot of combinations with ROMs and recoveries finally I solved it. CWM wasn't working with its wipe options and tried TWRP and gave the full wipe of all partitions before flashing CM and gapps and it worked!!!!
Hi my nexus 4 is unlocked and has cm10.2 installed on it. I decided to update to cm11 4.4 and i got the correct gapps and rom and i backed it up in cwm. When i tried to flash cm11, an error came up and it turned out to be my cwm not being updated. So i tried to restore it to and i got a md5 mismatch error. So now im stuck in cwm. HELP
You can always flash back to stock and start over.
http://forum.xda-developers.com/showthread.php?t=2010312
audit13 said:
You can always flash back to stock and start over.
http://forum.xda-developers.com/showthread.php?t=2010312
Click to expand...
Click to collapse
is there any other way out?
I find going back to stock and starting over is best because there are excellent instructions for flashing back to stock, rooting, and installing TWRP.
Do you have any ROM installed? You could try installing an updated CWM, install CM10.2 again, and then try to restore your backup.
just download a updated cwm .img and flash using fastboot.
hello community
After flashing pacman rom
(http://forum.xda-developers.com/showthread.php?t=2400387)
,on a clean wiped device, i accidentaly set it to second boot in this multiboot solution
http://forum.xda-developers.com/showthread.php?t=2447534
using the recovery multiboot utility.
Now i am stuck in the boot animation and cant access recovery (blackscreen and restart).
But i am still able to access boot mode. I tried to flash a different recovery using odin3.07
http://forum.xda-developers.com/showthread.php?t=2397108
http://forum.xda-developers.com/showthread.php?t=2397108
Now I am not shure what to do, maybe odin flashing an official samsung rom?
Thank you for your help
update 03.03:
I odin flashed stock, according to this guide
http://forum.xda-developers.com/showthread.php?t=2265477
After that I odin flashed twrp and restored the efs partition from an nandroid backup.
everything working fine.
I´m out
Samsung GT-I9505 jfltxx (bought from amazon in germany)
bootloader:the one that cam with the frst offiacial kitkat release
pacman rom(alpha)
http://forum.xda-developers.com/showthread.php?t=2400387