Database Users

GPS and 3G issue AT&T

I am not sure if my setup is causing this issue or not.
I have a US Dell AT&T unit running with an iPad unlimited data plan SIM card,
I have an APN configured with "Broadband" as the cingular APN's dont seem to work
with the iPad data plan.
It seems that the 3G data connection seems to drop randomly and I have to go into Mobile Networks and change the apn from and back to the Broadband entry to kick 3G back on.
I also have an issue where I go into any APP that uses GPS i.e Google Maps and it instantly kills 3G when the GPS kicks on. I can get it to do this every time.
I think it may be more related to the iPad SIM than anything, but I dont have a 3G SIM with a standard plan and voice.
I also have had major issues with the Rebel Sim II v1.1 and TMobile where EDGE data works for about 20 min and then never works again.
Anyone else see anything like this?
Also wondering if I have a defective Streak.
G

unlocked dell UK with 2.1 MCR, same problem.
I also initially thought the gps was the matter, but with Radardroid I don't have any issue. Also if I switch-on the gps from any widgets..
The connection shutdown with GOOGLE MAP
When i put my simcard (TIM italy) on streak, it set the apn for GPRS, WAP and MMS
I always use gprs and I have a limited (3G/month) flat-plan (in italy don't exist a full flat mobile connection!).
I don't have a plan for wap connection, because I do not use more than ten years!!
For me it is not the first time that I lose $$$ using involuntarily the (very old) wap connection, because some app call this connection. And it has always happened configuring gmail or using google map.
So I think that these google apps try to switch to using another connection with different apn
I tweaked my wap apn with a fake address.
So when i launch googlemap, it try to switch to wap connection but it fails due the fake address; I save my $$$, but I lose the umts/hsdpa and need a reconnection.
Maybe at the same on your dell, the app don't find the apn e lose the connection
Sorry for my bad English, but I think I've given you some good clues

Same exact setup (pad data sim) and same problem. Using 2.1 and beta unit.
Sent from my Dell Streak using XDA App

Hi,
make sure you had checked "supl" of APN type in your new APN profile.
The SUPL (AGPS) protocol was trying to work.

YESS! your advice was very helpful and I have solved my problem. Now googlemaps no longer shutdown the 3G connection
Thank you very much

That also worked for me, Brilliant! Thanks so much.
Think this was my main issue with the Rebel Sim too, going to try my TMobile SIM later.
G

I've placed my iPhone 4 SIM in the device and I can use the phone (calling) all I want but the data does not function correctly. I've used the default APN information and also made my own:
ATT Wireless
APN: wap.cingular
user: [email protected]
pass: CINGULAR1
MCC: 310
MNC: 410
I've also tried my iPad SIM. The data will work a for a few moments and then stop responding. I keep the AT&T network identifier and the (H) network indicator the entire time. When the data is not working, the arrows fluctuate back and forth but I alway receive a timeout message or a data failure error. Any one have any suggestions? I had AT&T reprovision my iPhone 4 SIM with the standard unlimited smartphone data plan but it did not help.
Thanks.

I was able to get my iPad sim working by adding a new APN with the name "Broadband"
This worked without any issues on my streak.
G

[Q] Focus + network type changing

Currently experiencing "hiccup" in internet/data experience with my focus. If phone is not in 3G+ mode, i get no data.
Can someone confirm my theory;
Situation:
Purchased Samsung Focus from rogers, thus rogers network profile (preset network setting for data usage such as MMS or internet).
Unlocked and stuck in bell SIM. can send/recieve calls, and txts, use data (internet, marketplace, weather updates, etc) if phone is in 3G+ mode (seen by tapping near top of screen). Can not use MMS
Presumable:
1)Focus was initially programmed to work on Rogers network.
2)Focus/Rogers, have a GPRS & EDGE capability
Theory:
Focus is programmed to use 3G radio for data (which is more widely accessible, & consumes less power), until detects 3G+/HSPA network and switch to that HSPA radio.
Since bell does not have a GPRS or EGDE network, when phone tries to receive data through 3G radio, it get nothing because no GPRS or EGDE network.
Is this possible, can phones change network they're using?
Theorized Solution:?????
Since Bell has 3G+ network,and they offer LG quantum. Could LG quantum be initially programmed to only use 3G+/HSPA, therefore anytime data is requested it activates the 3G+ radio.
If this is true of the LG quantum, could this be programmed into the Focus as well.
Thus i ask the community is this possible and how to implement solution?????
Sidenote:
I know the easiest solution would be to change to Rogers, however, Canadian provider fees are ridiculous (i'd be incurring early cancellation fee + a new restrictive costly plan from rogers) and there are others which don't have a choice but to use bell, and should have the freedom to choose a device of there choice with a little work.

I'm hitting a similar issue on Fido. The cell side works, and data only works if I enable data roaming. I downloaded the Network Profile app, but it won't let me get anything as it tells me "The application can't be launched with your mobile operator."

colinbo said:
I'm hitting a similar issue on Fido. The cell side works, and data only works if I enable data roaming. I downloaded the Network Profile app, but it won't let me get anything as it tells me "The application can't be launched with your mobile operator."
Click to expand...
Click to collapse
I think in your case it's just a matter of adding a APN.
Follow the instruction in the follow thread:
http://forum.xda-developers.com/showthread.php?t=843517
a search for "FIDO APN" on google, and i found this;
FIDO
Name: fido internet
APN: internet.fido.ca
Username: fido
Password: fido
APN Type: default
Leave All other Settings Blank
MMS
Name: fido mms
APN: mms.fido.ca
MMSC: http://mms.fido.ca
MMS Proxy: 205.151.011.013
APN Type: mms
Leave All other Settings Blank
That should get your data working, and you wont be incurring roaming charges.
Other then that, let me know if your having a similar issue to above, i don't think you should as FIDO is a pure GSM network from day one so it'll have GPRS/EDGE/HSPA

MMS
Interesting the various issues people are having with connecting to different networks...doesn't seem to be a one-size-fits-all issue/solution.
In my case, I got a new Rogers sim card (unlocked AT&T branded Focus from Expansys), put it in, updated my APN info, and I have voice and data.
BUT, I have no texting/messaging ability! I know others have listed the MMS settings for Rogers, but the Focus seems to only allow adding *one* APN setting. No clue where the MMS settings can be applied.
Other friends who have Rogers sims were able to put it in their Focus and had no problems at all with texting, internet, etc.
Anyone have thoughts on this issue, please respond.

reaver_shadow said:
I think in your case it's just a matter of adding a APN.
Follow the instruction in the follow thread:
http://forum.xda-developers.com/showthread.php?t=843517
Click to expand...
Click to collapse
The instructions appear to be for the LG device, not the Samsung Focus. The code doesn't get me into any factory menu. The diagnostics screen just sits when I type in the code. I downloaded the Network Profile app but it errors out saying "The application can't be launched with your mobile operator".

Facepalm
OMG, I'm an idiot!
So apparently Rogers requires 1+area code for sending texts? Telus didn't...*sigh*...
So yes, I have texting ability (haven't tried MMS though).

Samsung's response:
http://www.wpcentral.com/samsung-our-phones-do-not-support-network-reconfiguration
Now that this issue got publicity lets see how long they keep up this attitude?
UPDATE:
COuld it be MS to the rescue?
"Microsoft is aware of the problem and it has been escalated."
Source:
http://www.wpcentral.com/windows-phone-7-unlocked-devices-and-mms-quite-mess

Not much to add other than I'm in the same situation as reaver_shadow. Bought from Rogers, unlocked it and put in Bell SIM card. Everything works except MMS and data if not on 3G+ (will work when '3G' is displayed, but I guess it's borderline). Tried playing with option *#2263# in Samsung Diagnosis (##634# + Dial), but does not fix the issue. Hoping the Network Profile will become available for changing. Using the Network Profile app from Samsung does not work. Says it does not work with my provider. Says active profile is 'Rogers'.
Update:
Probably just lucky, but I have had a steady connection since this morning. I set option 2-7 under Diagnosis option *#2263# (use all WCDMA Band). What maybe did the trick is enabling Roaming, as mentioned by @colinbo. My apn is set to pda.bell.ca.
Update:
Nope, just luck. :-(

Have you tried this:
http://forum.xda-developers.com/showthread.php?p=9709346#post9709346
That's how I got data working on SaskTel. Since we're using similiar technologies, it may work for you as well.

That's great!! I'll give it a try. Never thought about pressing the 'back' button. I should know next week if this solves it.

Anyone noticed that AT&T MVNO is getting restrictions?

My Net10 AT&T is getting weird behaviors... Can't access the Internet, if it does, it keep redirecting to 1.2.3.50, and sometimes it tells you to sign into network...
How about straight talk? Anyone notice anything?

No issues on ST At&t for me.

None for me either (ST AT&T).

I'm having the same problem with my net10 at&t on my note II. On the net10 forums there a a few post about it but the mods are pming the people directly. You have to have more than five post to use the pm service. I've been on hold with net 10 for an hour and a half and I contacted them on the website.

Yes, I switched to Net10 last week and I started getting the "Sign into network AT&T" notification yesterday afternoon. I have GT-i9300 so its a BYOP issue, not a Nexus issue. As stated above its posted all over the Net10 forums but their customer service is being less than helpful. MMS has not worked at all since I switched from StraightTalk and now data is not working at all.
UPDATE:
After sitting on the phone for 2 hours with Net10 customer service here is what I know: They told me that since my current location (work) is not the same area as the zip code which I registered my phone (home) that the priority is downgraded on the towers. I asked to change my registered location but I was told that it is locked to the SIM and that I would have to cancel my current SIM plan and have them ship me a new one in 3-5 days. Ridiculous. However the following steps have seemed to work (have not lost data connectivity for ~an hour).
1) If you are not sure your APN settings are correct, double check them
NAME: net10
APN: tfdata
MMSC: http://mms-tf.net
MMS PROXY: mms3.tracfone.com
MMS PORT: 80
http://www.net10sim.com/support.php
Once you are confident you APN settings are correct DO NOT TOUCH THEM AGAIN. DO NOT EVEN OPEN APN SETTINGS. If you even open the APN menu it seems to trigger a reset of your network connection, even if you discard any changes. Once the connection resets you have no data ("Sign into network AT&T" message). I assume this has something to do with AT&T network authentication and/or queue priority.
2) Power your phone off and leave it off for at least 60 seconds (and take out the battery - why not, it cant hurt.) I believe this prolonged shutdown is long enough for all your connection info to be dropped from the tower.
3) Boot your phone back up and HOPEFULLY your connection will be properly restored.
Again, once your data connection is restored do not even browse into the APN settings as this appears to de-authenticate your data.

I called Net10 today the guy slipped and told me its a 1.5GB cap and he said they apologize because it suppose to refresh on March 1,2013... he refreshed my network and everything .. sad part im using a samsung galaxy note 2 and the only that works on the network is facebook now aint that a B*tc$... Forgot to say the Internet Doesn't work at all only thing working is Facebook Application and Google Voice other then that Nothing works.. I was on the phone for 1 hour before I got a Reference code to give it 24 hours and call back.. now Net10 really needs to shutdown for sucky customer and network service support... Atleast Tmobile and At&t pretended they cared. This started happening yesturday and I also get the sign into network as a notification.. Net10 really needs to pay their cell phone tower BILLS

Killamurk said:
I called Net10 today the guy slipped and told me its a 1.5GB cap and he said they apologize because it suppose to refresh on March 1,2013... he refreshed my network and everything .. sad part im using a samsung galaxy note 2 and the only that works on the network is facebook now aint that a B*tc$... Forgot to say the Internet Doesn't work at all only thing working is Facebook Application and Google Voice other then that Nothing works.. I was on the phone for 1 hour before I got a Reference code to give it 24 hours and call back.. now Net10 really needs to shutdown for sucky customer and network service support... Atleast Tmobile and At&t pretended they cared. This started happening yesturday and I also get the sign into network as a notification.. Net10 really needs to pay their cell phone tower BILLS
Click to expand...
Click to collapse
I am using a NET10 AT&T microsim from the BYOP kit.
I was getting the same error you are getting, this is how you fix it.
i had to call the tech support number and get them to change me over to these settings.
this is what my net10 settings for APN are...
without it set like this I would get a weird "sign in to network" message every time my phone booted. and I would get no data connection.
name = Net10
APN= att.mvno
mmsc = http//mmsc.cingular.com <---xda says no <:> in the http
mms proxy = 66.209.11.33
mms port = 80
finally works though
mms in and out.
hspa+15 / hspa10 depending on where I am.
I had to call tech support to get those settings. The girl on the phone said she made some change to my account...not sure what she was talking about but when I plugged in the above apn settings it started working.

cuballevo said:
I am using a NET10 AT&T microsim from the BYOP kit.
I was getting the same error you are getting, this is how you fix it.
i had to call the tech support number and get them to change me over to these settings.
this is what my net10 settings for APN are...
without it set like this I would get a weird "sign in to network" message every time my phone booted. and I would get no data connection.
name = Net10
APN= att.mvno
mmsc = http//mmsc.cingular.com <---xda says no <:> in the http
mms proxy = 66.209.11.33
mms port = 80
finally works though
mms in and out.
hspa+15 / hspa10 depending on where I am.
I had to call tech support to get those settings. The girl on the phone said she made some change to my account...not sure what she was talking about but when I plugged in the above apn settings it started working.
Click to expand...
Click to collapse
Nope, I can't get internet. It's gray.

Notice the last part in my post. I had to call in to net10 tech support and they changed something.
Sent from my Nexus 4 using Tapatalk 2

FSRBIKER said:
No issues on ST At&t for me.
Click to expand...
Click to collapse
I just had this issue on ST AT&T BYOP iPhone 5 factory unlocked stock 6.1.4.
Using the new tfdata APN that has been provided by ST since 6/15. The legacy att.mvno doesn't work at all any more for me.
Toggling airplane mode resolved the issue.

Like Andromed0 I have received the message twice this week.I am also using the newer APN ST settings. I have tried the "toggle Airplane Mode" and will see what happens.

Verizon Galaxy S5 Moved/ported over to Straight Talk - NO DATA CONNECTION **SOLVED**

So, I will start by giving information that is hopefully relevant.
I moved from Verizon to Straight Talk w/ a Straight Talk SIM card for Verizon towers. My phone is rooted, and bootloader unlocked (15 emmc).
I am currently using a custom ROM CM13 (Official Build Nightlies current ROM is from 4-27-2016)
I started Straight talk about 1 week ago, and ported my number over to ST with a sim card I bought from Amazon for Verizon Towers.
When a person starts ST they give you a free 5 day trial, then you start your monthly payments. Everything was fine during the 5 day trial, I HAD data and it was connecting at 4G/LTE speeds (Mobile Network Icon displayed "Verizon"). Then, when the trial ended and my refill card kicked in, I lost all data connection. Absolutely NO internet. In fact, the mobile network icon in the status bar (pull down menu) displayed "No Service," I then called ST customer service, they were able to get me connected but only at 3G speeds (However the mobile network Icon still displayed "No Service." I have coverage in this area I live in for 4G/LTE as I used it in this area for 2 years when I was with Verizon. The CS rep (who was a supervisor) then tried to get me connected at 4G. Long story short, they could not get me connected, in fact I lost data again. (I should mention that at this time I can still place and recieve calls as well as send and receive text messages.) The CS rep then contacted Verizon and now they are sending me a new SIM card. My question is, What is the difference between the CM13 Unofficial VS Official Build? Could this be affecting my DATA connection? The unofficial builds can be found in the Galaxy S5 Verizon Development Threads. Can't remember where I found the official builds, but is the official Cyanogenmod site. I do have the link, but I don't have enough posts to show. Could I possibly be using the wrong ROM? Or is it something on Straight Talks side? Or have I missed something? Could this problem be a symptom of using the DEV Bootloader unlock method for Samsung 15 emmc? I would appreciate some insight on this. I should be receiving my new SIM hopefully in a few days or by the beginning of next week so I can update more when that comes. Thanks for taking the time to respond.

deleted

put in this APN. I edited the VZWINTERNET APN and deleted the others:
NAME = whatever you want. I called it Straight Talk Verizon
APN= TRACFONE.VZWENTP
MMSC= http://mms.vtext.com/servlets/mms
MCC= 311
MNC= 480
APN TYPE= default,dun,stdhipri,supl
BEARER= LTE
Reboot phone

buschris said:
put in this APN. I edited the VZWINTERNET APN and deleted the others:
NAME = whatever you want. I called it Straight Talk Verizon
APN= TRACFONE.VZWENTP
MMSC= http://mms.vtext.com/servlets/mms
MCC= 311
MNC= 480
APN TYPE= default,dun,stdhipri,supl
BEARER= LTE
Reboot phone
Click to expand...
Click to collapse
Response is very much appreciated, unfortunately for some reason these APN settings do not work, ("No Service" is displayed with no signal bars under the mobile network icon in the pull down menu from the status bar) I have tried other various APN settings from random forums, and youtube. None have worked. Maybe my SIM card is corrupted possibly? I guess I will have to wait and see when Str8 Talk sends me my new SIM card. Will update/post new info when I know more. Thanks.

funny you should say that, today I don't have data or a signal at all (at work). I'll report back if that changes at home later today. It could be a sim issue or just a straight talk issue.
Sent from my Nexus 6 using Tapatalk

buschris said:
funny you should say that, today I don't have data or a signal at all (at work). I'll report back if that changes at home later today. It could be a sim issue or just a straight talk issue.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Interesting, glad to know I'm not the only one in this situation. Thanks. I will be sure to update this post as well when I know more. Thanks.

so the way I finally fixed it was to reload CM13 and use the last APN to edit with my settings and not delete the others. Don't know why it mattered but I'm up and running
Sent from my Nexus 6 using Tapatalk

Yeah, tried editing the last APN as you suggested, still nothing. However I can connect to the tower (still with "No Service" indication) to receive phone calls and mms. But still no data. My new SIM card arrives in the mail 2 moro. Hopefully that is the issue.

If you're unable to edit the APN settings, I'd think that it was a faulty SIM card. Keep us notified, I'd be glad to help if possible.

camcorder123 said:
If you're unable to edit the APN settings, I'd think that it was a faulty SIM card. Keep us notified, I'd be glad to help if possible.
Click to expand...
Click to collapse
Well, I am able to edit my APN settings, just the settings I have tried from XDA and other random forums/youtube/etc. just have not been working. As I have mentioned I am receiving my new SIM from Str8Talk 2moro, so hopefully a faulty SIM is the issue. Thanks for all the responses everyone, and I will keep everyone updated.

This is what worked for me. I am running daily CM13and been very happy. I edited the last APN entry and it saved fine.
Name: Verizon Internet (name whatever you want)
APN: TRACFONE.VZWENTP
MCC: 311
MNC: 480
APN Type: default,dun,supl
APN Protocol: IPv4/IPv6
APN Roaming Protocol IPv4/IPv6
Bearer: Unspecified
The rest is empty or default
MMSC on mine says "not set"

SOLVED
Well received my new SIM card. Apparently the old SIM wasn't letting me connect to the towers. Old SIM card displayed "No Service" under the Mobile Network icon. I called CS they activated my new SIM. New SIM card displayed "Verizon Wireless." However I still wasn't able to get data. They then escalated the ticket. After I hung up the phone I tried these APN settings:
puterdoc said:
This is what worked for me. I am running daily CM13and been very happy. I edited the last APN entry and it saved fine.
Name: Verizon Internet (name whatever you want)
APN: TRACFONE.VZWENTP
MCC: 311
MNC: 480
APN Type: default,dun,supl
APN Protocol: IPv4/IPv6
APN Roaming Protocol IPv4/IPv6
Bearer: Unspecified
The rest is empty or default
MMSC on mine says "not set"
Click to expand...
Click to collapse
These worked, not sure if the previously mentioned APN settings would of worked as I did not try them with my new SIM card. It could very well be that those APN settings would of worked too. So, long story short I'm thinking the original SIM I used became corrupted somehow. Not sure how that could of happened but everything is functioning properly. I then called ST CS and had them close my ticket before they made any more changes to my account from their side. Thanks to all who replied to this thread.

Thought I would provide another update... For some reason the APN settings for TRACFONE.VZWENTP stopped working today. Called straight talk and got data working again using the VZWINTERNET apn setting. So weird. Not sure why I'm updating this thread but I thought it was important? LOL probably not, because straight talk seems to be a Sh** storm. LOL IM GOING CRAZY!!! Weeeeeeeeeeeee

APN not working for me
Hello, I had straight talk last year on my unrooted verizon samsung galaxy s5 and had no problems with the apn settings. I rooted my phone about 2 months ago using this forum http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370. Today I decided to reactivate my straight talk service and I have tried multiple apns and none of them seem to work. Also the apn on this forum wouldn't even save on my phone. Any idea on what i should do? Maybe I need a new sim card?

Fefe024 said:
Hello, I had straight talk last year on my unrooted verizon samsung galaxy s5 and had no problems with the apn settings. I rooted my phone about 2 months ago using this forum http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370. Today I decided to reactivate my straight talk service and I have tried multiple apns and none of them seem to work. Also the apn on this forum wouldn't even save on my phone. Any idea on what i should do? Maybe I need a new sim card?
Click to expand...
Click to collapse
Update, i finally got my data working. I had to use a new sim card as well. I am currently using the verizon CDMA sim card that came in the byop pack. Been having some issues receiving text and mms messages tho and the apn used is what is on this forum since it is compatible with the sim without making any changes.

Have GS4 using on Straight Talk VZW towers but have been unable to get 4G working 3G is doing ok. Was changing apn settings to this post and also noticed that i am unable to input manually the APN type....options being (Internet+MMS) (Internet) and (MMS)
may be a bad sim as well but just wanted to chime in and see if anyone had run into similar issues.
Thanks in advance!!

Chadwick108 said:
Have GS4 using on Straight Talk VZW towers but have been unable to get 4G working 3G is doing ok. Was changing apn settings to this post and also noticed that i am unable to input manually the APN type....options being (Internet+MMS) (Internet) and (MMS)
may be a bad sim as well but just wanted to chime in and see if anyone had run into similar issues.
Thanks in advance!!
Click to expand...
Click to collapse
I would just try to talk to Straight Talk about it, it could be the sim card, or it could be the phone number you currently have. I just reactivated my service hoping no one else had my number but they did which had ended that person's service, which was why i was having a difficult time receiving text and mms. Now that i have a new number and used a new sim card everything works fine. I also can't manually change the Verizon apn but so far i have no need to change it.

Same issues but I have a Galaxy Sky Pro. Straight talk and verizon towers. Tried changing APN, NO luck. It will only let me change my APN, NOTHING ELSE????? It is a straight talk phone???? HELP!

Still Having Verizon / Page Plus Connectivity Problem

Sorry for dragging this issue out again, but I got my phone messed up again.
Situation is that I use PagePlus (Verizon MVNO) It was sorta working, but I was only getting 1X data on my A2017U running version B35. If I restarted the phone, I would get an LTE signal until the phone went back to standby. I got tired of that, and I took some time to try to get it reinitialized per the messages here and on the ZTE forum site.
The result now is the phone starts up, says Verizon Wireless for about 4 to 15 seconds, then it goes to No Service / Emergency Calls Only. LTE never appears on the screen.
To get to this condition, I backed up my files cleared cache and did a factory reset.
I put in a T-Mobile SIM. When I start with that, the top of the screen shows HOME and two bars. I restarted the phone a couple of times, then put the PagePlus SIM.
I can put the PagePlus SIM into my old Galaxy S4 and I get LTE service
With the PP SIM in place, under the SIM Settings, I have:
Network Mode: LTE/WCDMA/GSM
Data Roaming : On
Access point settings:
Name: Verizon Internet
APN: TRACFONE.VZWENTP
MMSC: http://mms.vtext.com/servlets/mms
MMS Port: 80
MCC: 311
MNC: 480
APN type: default,dun,mms,supl
APN protocol: IPv4/IPv6
APN roaming protocol: IPv4/IPv6
APN enable/disable: APN enabled
Everything else Not Set or None
In the phone diagnostics, it does show my proper phone number. The IMEI displayed matches the sticker on the back.
Current Network: blank
Signal Strength: -1 dBm 99 ASU
Voice Service: Emergency Calls Only
Data Service: Disconnected
Voice Network Type: Unknown
Data Network Type: Unknown
Voice Call Status: Idle
Roaming: Not Roaming
Preferred Network Type: LTE/CDMA/UMTS auto (PRL)
Right now it shows me attached to a Verizon tower since the Cell Measurement Info shows MCC is 311 and MNC is 480. It has attached to GSM signals at other times.
I thought I followed all the right steps. Did I miss something?
Thanks,
Paul

I had the same issue. I had to have Verizon manually approve the device on their network. I still don't have VoLTE, but i have data (4G) and calls. Call them and explain what your trying to do. They should help you.

Thanks.
I tried calling, but their system kept wanting me to enter a phone number to get through. It hung up on my a couple times. I went to a Verizon corporate store today, but they couldn't (or wouldn't) help.
I tried calling Page Plus again just now. I got up to 2nd level support this time, and he went through the IMEIs for my phones. He was saying I had a different number assigned to my account that I couldn't identify. We ended with him suggesting a contact a local dealer.
After our call concluded, I was about to give up, so I started looking at the plans AT&T MVNOs offer. I went to Cricket, and it wanted the IMEI. by using #*06#
I forgot this thing has two. What I noticed is that the IMEI that appears when I go to *#*#4636#* phone information is IMEI2. IMEI1 is what PP has in their system for me. I can't put the CDMA SIM in slot 2
Another weird thing is after I went to #*06#, looking back through *#*#4736#* changes the IMEI correctly to IMEI1. I still don't get a signal. Now I'm getting No Signal with the T-Mobile SIM installed. I think I need to go mountain climbing to get this set.

pauldow said:
Sorry for dragging this issue out again, but I got my phone messed up again.
Situation is that I use PagePlus (Verizon MVNO) It was sorta working, but I was only getting 1X data on my A2017U running version B35. If I restarted the phone, I would get an LTE signal until the phone went back to standby. I got tired of that, and I took some time to try to get it reinitialized per the messages here and on the ZTE forum site.
The result now is the phone starts up, says Verizon Wireless for about 4 to 15 seconds, then it goes to No Service / Emergency Calls Only. LTE never appears on the screen.
To get to this condition, I backed up my files cleared cache and did a factory reset.
I put in a T-Mobile SIM. When I start with that, the top of the screen shows HOME and two bars. I restarted the phone a couple of times, then put the PagePlus SIM.
I can put the PagePlus SIM into my old Galaxy S4 and I get LTE service
With the PP SIM in place, under the SIM Settings, I have:
Network Mode: LTE/WCDMA/GSM
Data Roaming : On
Access point settings:
Name: Verizon Internet
APN: TRACFONE.VZWENTP
MMSC: http://mms.vtext.com/servlets/mms
MMS Port: 80
MCC: 311
MNC: 480
APN type: default,dun,mms,supl
APN protocol: IPv4/IPv6
APN roaming protocol: IPv4/IPv6
APN enable/disable: APN enabled
Everything else Not Set or None
In the phone diagnostics, it does show my proper phone number. The IMEI displayed matches the sticker on the back.
Current Network: blank
Signal Strength: -1 dBm 99 ASU
Voice Service: Emergency Calls Only
Data Service: Disconnected
Voice Network Type: Unknown
Data Network Type: Unknown
Voice Call Status: Idle
Roaming: Not Roaming
Preferred Network Type: LTE/CDMA/UMTS auto (PRL)
Right now it shows me attached to a Verizon tower since the Cell Measurement Info shows MCC is 311 and MNC is 480. It has attached to GSM signals at other times.
I thought I followed all the right steps. Did I miss something?
Thanks,
Paul
Click to expand...
Click to collapse
Hey Paul,
ZTE does seem to have de-stabilized the radio for me as well on B35. Oddly enough though, the Verizon SIM I have in slot 1 seemed to work ok...it was the MintSIM in slot 2 that seemed to be an issue, as it was barred from LTE (and showed 'No Service' unless I manually switched to WCDMA/GSM in the network settings) when switching from SIM 1 to SIM 2 for data and also after reboots when it was the data SIM. EDGE service seemed to work, but only when data was on Verizon or if I disabled LTE on SIM 2 if MintSIM was the data SIM.
It seems that with two GSM SIMs there wasn't as much of a problem...so this does seem to be related to CDMA in slot 1.
I fixed it (I hope...fingers crossed...seems to work better at least for now) by restoring the modem partition from my B32 backup in TWRP but keeping all other partitions in place from the B35 update. So basically I'm on the B32 modem firmware with the B35 system and boot and stuff. Of course, I know that may not be an option for you if you're not rooted but if you do happen to have TWRP and a B32 backup it may be worth trying. Good luck...I definitely agree there's some issue with what ZTE did in B35...CDMA has been affected adversely it seems...and all the typical magic tricks (i.e., using a GSM SIM, booting with no SIM, etc.) didn't seem to bring about a lasting solution either, though I didn't spend too much time on it before I opted to just do a restore to B32...

flyer_andy said:
Hey Paul,
ZTE does seem to have de-stabilized the radio for me as well on B35. Oddly enough though, the Verizon SIM I have in slot 1 seemed to work ok...it was the MintSIM in slot 2 that seemed to be an issue, as it was barred from LTE (and showed 'No Service' unless I manually switched to WCDMA/GSM in the network settings) when switching from SIM 1 to SIM 2 for data and also after reboots when it was the data SIM. EDGE service seemed to work, but only when data was on Verizon or if I disabled LTE on SIM 2 if MintSIM was the data SIM.
It seems that with two GSM SIMs there wasn't as much of a problem...so this does seem to be related to CDMA in slot 1.
I fixed it (I hope...fingers crossed...seems to work better at least for now) by restoring the modem partition from my B32 backup in TWRP but keeping all other partitions in place from the B35 update. So basically I'm on the B32 modem firmware with the B35 system and boot and stuff. Of course, I know that may not be an option for you if you're not rooted but if you do happen to have TWRP and a B32 backup it may be worth trying. Good luck...I definitely agree there's some issue with what ZTE did in B35...CDMA has been affected adversely it seems...and all the typical magic tricks (i.e., using a GSM SIM, booting with no SIM, etc.) didn't seem to bring about a lasting solution either, though I didn't spend too much time on it before I opted to just do a restore to B32...
Click to expand...
Click to collapse
I've been looking for some help with my phone. Ive had a perfectly working axon 7 on verizon (mvno total wireless) for like 2 years with full volte and all the rest. Works perfect. Now I had an issue ewith the display on that phone and got a replacement shipped out and now even after spending a solid week figuring out exacly how to copy my setup I cant get volte or any voice service at all. Here is what I did.
I'm on RR 6.0.0-20180511, hellsgate 3.18.109, ver 2.3 & baseband TH.2.0.c1.9-. This the old phone and the new one I copied everything over to it exactly as it is except a made a few minor changes. Those are: switching to f2fs data and cache partitions for speed, updating the bootstack to a new B10-B32 version i found and thats it. Modem, twrp version and everything else is the same. So the question is could the bootstack be the issue. Now I also noticed one very odd issue. My IMEI do not match the back of the phone after putting in the sim card but why? This is really odd, it seems that changes the IMEI but how? It still has 2 IMEI and they both start with a 990 number instead of the 861 for the first imei that they usually do. Is there something to that?