guys , i want to ask to you ? my phone doesn't want to boot up , only stuck at SAMSUNG BOOTANIMATION after i flashed it with DXLF1 firmware , altrough i already flashed it again , it still bootloop , please help me ? Can you suggest the most stable stock rom ?
There is no most stable stock rom
if its not a wipe pack go into recovery and wipe data/reset and restart else choose a firmware that is a wipe pack (says wipe in file name)
also questions ironically should be posted in the questions and answer section NOT general section
i got bootloop to after flashing that firmware. try to wipe the cache and dalvik cache in cwm
rizmajofe said:
guys , i want to ask to you ? my phone doesn't want to boot up , only stuck at SAMSUNG BOOTANIMATION after i flashed it with DXLF1 firmware , altrough i already flashed it again , it still bootloop , please help me ? Can you suggest the most stable stock rom ?
Click to expand...
Click to collapse
I always get bootloops after flashing stock rom through odin..It's normal..just pull out the battery,go into recovery then wipe data then reboot..
Try DDKK1
rizmajofe said:
guys , i want to ask to you ? my phone doesn't want to boot up , only stuck at SAMSUNG BOOTANIMATION after i flashed it with DXLF1 firmware , altrough i already flashed it again , it still bootloop , please help me ? Can you suggest the most stable stock rom ?
Click to expand...
Click to collapse
Dowload Total Flashing Files like BOOT,PDA,PHONE,CSC and Including "totoro.pit" On Odin Please make sure uncheck phone bootloader update. then START thanks This is as per my knowlege
Related
Hi sory for this noob question but, i installed Rayogenmod, its works.
but i tryied to install 2 zip of JB UI and after reebot came black screen with baterry and signal icons. and i couldnt reebot into recovery.
Well i said i have to flash stock firmware i did with this tutorial http://forum.xda-developers.com/showthread.php?t=2173997
but now its worse than before. Its stuck in Phone Operator Boot loop.
Please help me!
Try to enter CWM, do a wipe data, try to reinstall the Stock ROM and pray, that's everything you can do (I think) :fingers-crossed:
After root n900,i installed custom rom, vn- rom,it work perfect,then i wanted to come back to the original rom that i had backed up,but after restore,my fone stuck on logo .then i clean,format everything that i can in recovery,and flash the vn-rom again,but it still stuck on the samsung logo.
So pleas Help me,if u have any idea,solution.
sorry ,my english not good.iam a new b,
My email;[email protected]
And i like making friends with y'all,
kvu.3363 said:
After root n900,i installed custom rom, vn- rom,it work perfect,then i wanted to come back to the original rom that i had backed up,but after restore,my fone stuck on logo .then i clean,format everything that i can in recovery,and flash the vn-rom again,but it still stuck on the samsung logo.
So pleas Help me,if u have any idea,solution.
sorry ,my english not good.iam a new b,
My email;[email protected]
And i like making friends with y'all,
Click to expand...
Click to collapse
Reflash VN ROM but after flash finishes, untick 'reboot phone' then wipe dalvik and cache partition manually then reboot.
If ROM still doesn't boot.. Well, FULL WIPE in stock recovery. Reboot again.
Still doesn't work? Well, Flashing Stock ROM in ODIN is the way to go. Cheers!
Hey sombody plz help me to get through this,I installed the OTA then I unlocked bootlocker and installed the custom recovery twrp 2.8.7v2 ....then I tried to install the SuperSU....but after flashed it through twrp,I was stucked at "Warning Bootlocker Unlocked" screen for like 15 min,so then I tried to clear cache and then reboot....But that also not help,Then i tried format all the data and tried to to strt in factory mode.but still stucked at same screen.Now what should I do to get into the phone ?PLz ....its urgent
Well the thing you could do is factory resetting via TWRP or you could download a new ROM like CM 12.1 that you can find in the original android developer section and flash it with TWRP, your phone would boot up now. Keep in mind that you will lose everything.
anks095 said:
Hey sombody plz help me to get through this,I installed the OTA then I unlocked bootlocker and installed the custom recovery twrp 2.8.7v2 ....then I tried to install the SuperSU....but after flashed it through twrp,I was stucked at "Warning Bootlocker Unlocked" screen for like 15 min,so then I tried to clear cache and then reboot....But that also not help,Then i tried format all the data and tried to to strt in factory mode.but still stucked at same screen.Now what should I do to get into the phone ?PLz ....its urgent
Click to expand...
Click to collapse
The same happend to me, you must have installed the wrong SU version, just reflash stock firmware via fastboot and reinstall OTA, then if u wanna root use SuperSU v2.61, hope it helps.
Just flashed the CM12.1 through twrp ,problem is solved in a way.
anks095 said:
Just flashed the CM12.1 through twrp ,problem is solved in a way.
Click to expand...
Click to collapse
facing the same problem...... is flashing CM12.1 gonna solve it ?
praveen1618 said:
facing the same problem...... is flashing CM12.1 gonna solve it ?
Click to expand...
Click to collapse
It will but you should have unlocked bootloader.
praveen1618 said:
facing the same problem...... is flashing CM12.1 gonna solve it ?
Click to expand...
Click to collapse
unlock ur boot-loader first ,then flash cm through fastboot or if u have twrp then copy the cm zip in the sd card and then flash it through twrp.But remember to wipe the system,cache,dalvik cache and data.problem should be gone.
anks095 said:
unlock ur boot-loader first ,then flash cm through fastboot or if u have twrp then copy the cm zip in the sd card and then flash it through twrp.But remember to wipe the system,cache,dalvik cache and data.problem should be gone.
Click to expand...
Click to collapse
Sorry Noob question- when should I wipe the system,cache,dalvik cache and data ?? Before flashing cm 12.1??
And I am currently on mm rooted. And cm12.1 is based on lollypop, will there be any problem if I flash cm12.1?
bablu048 said:
Sorry Noob question- when should I wipe the system,cache,dalvik cache and data ?? Before flashing cm 12.1??
And I am currently on mm rooted. And cm12.1 is based on lollypop, will there be any problem if I flash cm12.1?
Click to expand...
Click to collapse
It will work fine.Backup your current system using twrp and then flash cm12.1.
bablu048 said:
Sorry Noob question- when should I wipe the system,cache,dalvik cache and data ?? Before flashing cm 12.1??
And I am currently on mm rooted. And cm12.1 is based on lollypop, will there be any problem if I flash cm12.1?
Click to expand...
Click to collapse
hope fully there would not be any problem....but in case of going wrong with something you should make a back up with twrp to go back to previous build,and yes ,before flashing any rom, you should wipe your cache ,dalvik cache and data......and system if u need...depends upon you
about moto x stucked while rooting
anks095 said:
Just flashed the CM12.1 through twrp ,problem is solved in a way.
Click to expand...
Click to collapse
i was trying to root moto x play i unlocked bootloader but when i tried to root my phone stuked in WARNING BOOTLOADER UNLOCKED.......... I TRIED WIPE ALL DATA FROM RECOVERY.... i tried some research someone said try to flash cm12.1 with twrp but i dont know hot to do this..... my mob is not connecting with pc plz help me guyz plz contect me at my gmail [email protected] its very urgent......plz tell me what to do step by step
sonubisht said:
i was trying to root moto x play i unlocked bootloader but when i tried to root my phone stuked in WARNING BOOTLOADER UNLOCKED.......... I TRIED WIPE ALL DATA FROM RECOVERY.... i tried some research someone said try to flash cm12.1 with twrp but i dont know hot to do this..... my mob is not connecting with pc plz help me guyz plz contect me at my gmail [email protected] its very urgent......plz tell me what to do step by step
Click to expand...
Click to collapse
first of all, which super su zip u r trying to flash ???? only this super su - "SuperSU-v2.62-3-20151211162651.zip" works on MXP...... after unlocking the boot loader u need to flash first twrp custom recovery...then entering into twrp interface,format the whole internal memory (I m sorry,u have to do that,no other way is possible)...... then put cm12 zip which u want to flash in sd card then flash the zip through twrp....... I guess this way your problem would be solved.....
If u flashed the correct mentioned supersu you should be fine.It happened 3 times also to me.I just press power continuously to power off and then it boots normally.
Please in case of SuperSU do not use 2.62-3 anymore, use 2.79SR3. Both are supposed to work, but 2.79SR3 is newer and has some bugfixes.
Note: The release 2.79 will not work, the detection fix to install systemless for all Moto devices is only integrated in 2.79SR3. 2.62-3 does no detection, it always installs systemless.
that was rom problm
mausv said:
Well the thing you could do is factory resetting via TWRP or you could download a new ROM like CM 12.1 that you can find in the original android developer section and flash it with TWRP, your phone would boot up now. Keep in mind that you will lose everything.
Click to expand...
Click to collapse
that was a rom problem
my phone is not turning on pls help after updating one ota of marshmallow security patch 1 jan
anks095 said:
Just flashed the CM12.1 through twrp ,problem is solved in a way.
Click to expand...
Click to collapse
Is cm12.1 support direct volte calling,.? Or any other custom rom which support volte calls???.
I flashed CM ROM today to try and see what progress has been made. I decided to return to the stock ROM. Flashed the stock ROM and wiped everything except system partition. Rebooted the phone and it is resetting itself at the first logo now. The second stage of boot (animated logo) doesn't initiate.
Download and Recovery modes work. Flashing the stock firmware with both Odin and Smart Switch didn't fix the problem. I tried PIT file and NAND Erase with a no go. Any help would be appreciated.
Edit: After spending some time trying, I realized I can only boot CM. Maybe CM caused this problem or the Gapps package I have been using. I am not sure. I'll be happy if anyone can help me fix this problem.
just flash cm12.1 (clean install without gapps ) do not let device boot just flash and then flash any rom you like it (dirty flash )
sorry for bad english
osamaAlrogi said:
just flash cm12.1 (clean install without gapps ) do not let device boot just flash and then flash any rom you like it (dirty flash )
sorry for bad english
Click to expand...
Click to collapse
this doesnt work mate
my device is samsung s3 neo i9300i.recently i install twrp 2.7.1.0 and accidently delete all partitions and system and data.so now there are no os system.and i cant boot my phone.phone stucks on samsung logo.but i can boot into twrp recovery mod.then i decide to flash stock rom throgh twrp recovery but it fails and also try cm 12.1 official and unofficial it also fails.its showing no md5 file found.patching system image unconditionlly and updating partitions.so what can i do.i dont have pc.so give me solution which can i solve with twrp 2.7.1.0 .and one que. can i install noble rom 2.1 on this mobile in this situation?please help me......
I think you still need to find any PC with samsung drivers installed and Odin. Boot into download mode (vol down + power) and flash service firmware to recover partitions. Maybe exist any other solutions, but this, IMHO, is what you need to do.
After installing cm12.1, doesn't it boot?
Don't worry about the md5 file warning or patching system unconditionally. If you got no errors (other than what i mentioned here), it should boot fine.
in twrp there is an option of terminal command.but i dont know how to use it.when i click to open this terminal conmand then open systems folders and files and bottom line there is a option of select current folder.so how can i use it to flash rom with this.anyone have idea then please help me
I several times wiped everything at once through TWRP, then just restarted into recovery, copied .zip files for the ROM and gapps from a computer and flashed them, so can't really see where is the problem in your case. Doesn't the PC find your phone as a storage drive after wipe and restart?
yesterday i successfully install nobel rom 2.1 in my device.but now problem is i cant boot my phone.its showing samsung logo and then automatically going in download mod.before this installation i several time wipe every partitition and succedsfully install noble rom 2.1 but cant boot my phone.problem always there.please please help me
Maybe the problem is with the ROM and it's incompability with your phone. What if through Odin you flash a stock ROM from a computer in download mode and then try another custom ROM?
But of course first try to enter recovery and directly flash (another) working ROM, because going through stock with Odin takes much more time and nerves. Also, with Odin you have to be extremely careful to use the exact stock ROM for your device, so this is kind of a last-case scenario.
Plz check the rom u r downloaded is not corrupted
Or download again by any other phone and save it to external sd card then plug it on ur s3 and flash it
plz can any provide me twrp nandroid backup of system and boot partition of s3 neo i9300i plz plz plz
because in my area downloading speed is too slow.so i cant download stock firmware.its getting corrupted.i try to download it 4 to 5 times but its getting corrupted.so plz provide me backup file
U can't install stock firmware with twrp.
It can be flash using odin for pc only
ya.i know that.u mistaken me.i don't want stock rom.i want backup file of rom.just like that when we do full system backup with twrp recovery before installing new custom rom.are u understand my friend.please help me yaar.my phone is off from 2 months so please please help me .i want backup file of system and boot partition using twrp recovery.
if u have then please upload
required twrp recovery backup file which includes system and boot partition. for samsung s3 neo i9300i.
vinayak1910 said:
required twrp recovery backup file which includes system and boot partition. for samsung s3 neo i9300i.
Click to expand...
Click to collapse
Sorry but i don't have that files U have to flash cm or any other custom rom again
but in my phone i wiped my operating system.so there is no os installed.so is it possible for me to flash cm rom?can i install cm rom with clean installation and is that possible then which version have to install?please reply
If you deleted ALL partitions, you have to flash Stock. If not, then just install something.
vinayak1910 said:
but in my phone i wiped my operating system.so there is no os installed.so is it possible for me to flash cm rom?can i install cm rom with clean installation and is that possible then which version have to install?please reply
Click to expand...
Click to collapse
Yes of course you can. Flash whichever version you want. Just make sure it is only for your device s3 neo not any other Samsung phone. If you have solved the problem, then reply here and all moderator to close this thread.
Hit thanks of it helped!