Hello guys.
I have a SM-N9005 free from carrier.
My note was originaly on a 4.3 Fw french unlocked version. Since the french havent released the 4.4.2 fw i went right ahead and tryed to upgrade via ODIN to 4.4.2. So i downloaded the AUT (Swiss no carrier) version of 4.4.2, and tryed to flash it with ODIN 3.09.
The thing is right on the end i get an error on ODIN and now i am stuck with this screen! But KIES doesnt recognize my Note 3.
http://i2.wp.com/androidcentral.us/wp-content/uploads/2013/09/Firmware-upgrade-error.png
The ODIN info in the end is the following:
<OSM> N9005XXUENA6_N9005AUTENA2_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> FAIL! (Size)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone help me?!
PunK_BoY said:
Hello guys.
I have a SM-N9005 free from carrier.
My note was originaly on a 4.3 Fw french unlocked version. Since the french havent released the 4.4.2 fw i went right ahead and tryed to upgrade via ODIN to 4.4.2. So i downloaded the AUT (Swiss no carrier) version of 4.4.2, and tryed to flash it with ODIN 3.09.
The thing is right on the end i get an error on ODIN and now i am stuck with this screen! But KIES doesnt recognize my Note 3.
http://i2.wp.com/androidcentral.us/wp-content/uploads/2013/09/Firmware-upgrade-error.png
The ODIN info in the end is the following:
<OSM> N9005XXUENA6_N9005AUTENA2_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> FAIL! (Size)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone help me?!
Click to expand...
Click to collapse
Try Poland Fw 4.4.2 which works flawless with many
I am trying to do that but from sammobile its taking me 9 hours to download it! Can i take it from any other place faster?!
PunK_BoY said:
I am trying to do that but from sammobile its taking me 9 hours to download it! Can i take it from any other place faster?!
Click to expand...
Click to collapse
If u downloading threw sammobile u need o register with Tera for fast download otherwise try from below link for Mega
http://forum.xda-developers.com/showthread.php?t=2608458&page=2
jdomadia said:
If u downloading threw sammobile u need o register with Tera for fast download otherwise try from below link for Mega
http://forum.xda-developers.com/showthread.php?t=2608458&page=2
Click to expand...
Click to collapse
Tks. Now downloading from MEGA. Will give feedback.
ITS ALIIIIIIVE!!!! Thank you very much dear sir!
PunK_BoY said:
ITS ALIIIIIIVE!!!! Thank you very much dear sir!
Click to expand...
Click to collapse
Good to hear enjoy
I am having the same issue atm..
I know this thread is old but it's the only one I've found where the issue is identical to mine. I've been looking on sammobile for the poland version but there are so many different ones listed under Poland with what I'm guessing are the different carriers. Can you link me the version that you had previously mentioned? Would really help me a lot.
Cheers.
Edit: it worked!! But now.. I don't have the same network settings like 4G :/
Related
Hello everyone, I tried to update my SM-N9005 16 GB from stock Australian rom 4.3 to stock 4.4.2 Poland rom but without any success, someone knows how to fix this?
The output from odin:
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
FIXED: I Installed HK ROM 4.4.2 and my note is alive again
Poland firmware is for 32 Gb
Sent from my SM-N9005 using xda app-developers app
jdomadia said:
Poland firmware is for 32 Gb
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
So what firmware should I flash now?
patsan88 said:
So what firmware should I flash now?
Click to expand...
Click to collapse
Look for Hongkong 16GB Kitkat
I have tried two different Tar files from other sites but only get partial success, Can some one point me to a good Download.
Thanks For the Help!
Right now it boots shows the samsung screen then shuts off
CZuber said:
I have tried two different Tar files from other sites but only get partial success, Can some one point me to a good Download.
Thanks For the Help!
Right now it boots shows the samsung screen then shuts off
Click to expand...
Click to collapse
Have you tried sammobile.com? You'll need to register and downloads take a bit, but I've not heard of anyone having an issue with one of their files.
http://forum.xda-developers.com/showthread.php?t=2663619
Sent from my SPH-L720 using Tapatalk
Moved to Q&A.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Still get stuck FAIL!
What version of the Sprint S4 do you have?? There are 2, L720 (Original Release) & L720T (Triband, new release). They are not interchangeable so if you have the L720T you need to flash NAF or it will fail. If you are not sure which version of the phone you have, remove the battery and see what the model number is.
ibcenu said:
http://forum.xda-developers.com/showthread.php?t=2663619
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
I was hoping that was it but I have the SPH-L720 UD
Im going to try the latest Odin next
I got all the way through using odin 3.09 GREEN PASS But it still wont boot up. I see Galaxy S4 then shuts off. If I plug it in it just pulses about every ten seconds
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> modem.bin
<ID:0/005> NON-HLOS.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
CZuber said:
I was hoping that was it but I have the SPH-L720 UD
Im going to try the latest Odin next
Click to expand...
Click to collapse
Sorry..not familiar with SPH-L720 UD
Sent from my SPH-L720 using Tapatalk
Does it just get stuck at the Samsung screen or the sprint splash screen. If so you will need to perform a factory reset on stock recovery which will wipe your entire internal memory.
Sent from my SPH-L720 using Tapatalk
BOOM! It took like 6 times on Odin but it finnaly took and is back to stock and all good!
Thanks toi all that replied and helped me out each post got me closer to the success
Hi guys ,
I was using custom roms , last rom I was using is omega v21 .. I had some issues so everyone told me to flash stock rom ,
I downloaded rom from samfirmware 4.4.2 of course , tried to flash it , and it fails ..
here is the log :
<OSM> N9005XXUENA6_N9005AUTENA2_N9005XXUENA2_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> FAIL! (Size)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I searched for it , here , I tried the Poland Fw 4.4.2 and I got the same error ..
help please.. thanks in advance
RaDi said:
Hi guys ,
I was using custom roms , last rom I was using is omega v21 .. I had some issues so everyone told me to flash stock rom ,
I downloaded rom from samfirmware 4.4.2 of course , tried to flash it , and it fails ..
here is the log :
<OSM> N9005XXUENA6_N9005AUTENA2_N9005XXUENA2_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> FAIL! (Size)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I searched for it , here , I tried the Poland Fw 4.4.2 and I got the same error ..
help please.. thanks in advance
Click to expand...
Click to collapse
have you an android backup. Try to restore it...
have you check md5 from Poland and other rom you dl?
Can you start normally or you're stuck????
I redownload th Poland rom and it works now , Donnow why .. I did checked MD5 at the beginning and it was the same .. wierd
fail (size) means some of the files will not fit on the partitions your device has - flash a rom from the same country as it had when it was shipped
Sent from my SM-N9005 using XDA Premium 4 mobile app
Hi,
I've been trying to install the 5.0 update on my G900F S5 using firmware files from sammobile according to my region but Odin fails (trace bellow). Did anybody manage to get over this? I've seen people saying that this requires using a PIT file in order to perform a repartition while others argue against it. I would greatly appreciate any help.
Later edit:
The issue was that I've used a different carrier's firmware (I've used Romania Cosmote firmware instead of the unbranded version as it was not available at the time), thus having an incorrect partition table. Looks like using firmware from another region (even carrier) can require changing the partition table (using an appropriate PIT file). This might be helpfull for other people in the same situation.
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BNL9_G900FVFG1BNL1_G900FXXU1BNL9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> FAIL! (Size)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
I used Odin 3.10.7 and the file T535XXU1BQC1_T535DBT1BQD1_T535XXU1BQC1_HOME.tar.md5. When the process progresses to the end I'll get an error and everything does not work anymore.
Code:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
[/code}
That is from Odin.
Can someone help me here? MAybe there is a partition too small??? I got this thing gifted with a very buggy rooted Firmware. Which I wnated to get rid of.
Tried it again and now I get on the screen of the 535 the followinf error.
UDC Start
Volume SIze is too big 40960 < 307200
ODIN Invalid ext4 mage
Try with another firmware version, or use PIT file too
Where do I get a PIT file and another Firmware?
Drake008 said:
Where do I get a PIT file and another Firmware?
Click to expand...
Click to collapse
Try before with pit file. Use frija to download the firmware and pit. https://forum.xda-developers.com/t/tool-frija-samsung-firmware-downloader-checker.3910594/
Then, when you open that program, go in the 3 dots, and go to settings and there you should find an option to download pit file too. I don't remember how it's called, unfortunately. But you should find that. At the end, you will get the firmware splitted likely in 3-4 pieces with pit.
Found a newer one. Now it works. Thanks for the hint to search for a new one.