[Q] No sound + cant make calls after flashing new ROM - Galaxy S 4 Q&A, Help & Troubleshooting

I've looked at a bunch of other posts, been searching for a week for a solution to this but cant find anything.
I flashed the latest FoxHound ROM which is a KitKat rom.
I flashed it using the dev's instructions and after flashing, I had the wifi bug issue which I fixed. But the next issue was that I couldnt make or receive calls.
After this I tried flashing a couple of other roms and had exactly the same issue
The last Rom ive loaded is CyanogenMod 11-20140104-SNAPSHOT-M2-jfltexx
I've got the i9505
Says 4.4.2
SE Linux is enforcing (this used to be permissive - is that a problem? )
Baseband
i9505XXUFNA5
When I boot into download mode there is no Knox entry - i cant currently see the status although I'm guessing it's been tripped due to this flash which is fine, I just want to fix this issue and get it functioning correctly
Any help would be much appreciated.
Cheers
Edit:
Whenever I go into Apollo (music app), DSP manager FC's - says DSP manager has stopped working etc etc
When I try to make a call the screen goes blank, takes ages to respond, the phone at the other end is ringing but after they answer, nothing is heard.

FelixCited said:
I've looked at a bunch of other posts, been searching for a week for a solution to this but cant find anything.
I flashed the latest FoxHound ROM which is a KitKat rom.
I flashed it using the dev's instructions and after flashing, I had the wifi bug issue which I fixed. But the next issue was that I couldnt make or receive calls.
After this I tried flashing a couple of other roms and had exactly the same issue
The last Rom ive loaded is CyanogenMod 11-20140104-SNAPSHOT-M2-jfltexx
I've got the i9505
Says 4.4.2
SE Linux is enforcing (this used to be permissive - is that a problem? )
Baseband
i9505XXUFNA5
When I boot into download mode there is no Knox entry - i cant currently see the status although I'm guessing it's been tripped due to this flash which is fine, I just want to fix this issue and get it functioning correctly
Any help would be much appreciated.
Cheers
Edit:
Whenever I go into Apollo (music app), DSP manager FC's - says DSP manager has stopped working etc etc
When I try to make a call the screen goes blank, takes ages to respond, the phone at the other end is ringing but after they answer, nothing is heard.
Click to expand...
Click to collapse
Few weeks ago I faced the same problem but with arrow or omega rom I dun remember exactly. But it had Viper installed some kind of sound enhancing app. I deleted that n voila my phone's sound is back to normal
Sent from my GT-I9500 using XDA Premium 4 mobile app

simon7997 said:
Few weeks ago I faced the same problem but with arrow or omega rom I dun remember exactly. But it had Viper installed some kind of sound enhancing app. I deleted that n voila my phone's sound is back to normal
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Can you give a few more details - how did you delete that? from within the rom?
- ie: boot up, start ES file manager, find it, delete?
Thanks

FelixCited said:
Can you give a few more details - how did you delete that? from within the rom?
- ie: boot up, start ES file manager, find it, delete?
Thanks
Click to expand...
Click to collapse
Download and extract this file https://mega.co.nz/#!PIZinRQJ!EauDOl3DUDAYG81a636yWl94otIhzi8iUgcBk-LknZs and flash that .tar via odin by selecting phone/cp . Make sure to turn off your phone mate .
Sent from Hell ?

Repulsa said:
Download and extract this file https://mega.co.nz/#!PIZinRQJ!EauDOl3DUDAYG81a636yWl94otIhzi8iUgcBk-LknZs and flash that .tar via odin by selecting phone/cp . Make sure to turn off your phone mate .
Sent from Hell ?
Click to expand...
Click to collapse
Flashed with Odin under 'Phone'. Didn't do anything - same issues.

FelixCited said:
Flashed with Odin under 'Phone'. Didn't do anything - same issues.
Click to expand...
Click to collapse
I actually never use Foxhound and im not sure if hes rom is base on Leak kitkat or something. But if you dont have an Entry of Knox Warranty Void then try this , extract and flash the .tar

Repulsa said:
I actually never use Foxhound and im not sure if hes rom is base on Leak kitkat or something. But if you dont have an Entry of Knox Warranty Void then try this , extract and flash the .tar
Click to expand...
Click to collapse
Flashed Wanam plus that last modem file you gave me and it's fixed, I can make calls. Im stoked. But now I cant turn wifi on and i cant remember which file to flash to fix that!
So now my baseband is I9505XXUEMJ5
Build is WanamLite - XXUFNA5
SE Linux = Permissive
Thanks for the help, really appreciate it. I would've been searching for hours otherwise :good:

FelixCited said:
Can you give a few more details - how did you delete that? from within the rom?
- ie: boot up, start ES file manager, find it, delete?
Thanks
Click to expand...
Click to collapse
U could hv simply done that from application manager
Sent from my GT-I9500 using XDA Premium 4 mobile app

Im having the same problem, no sound or cant make calls
Ive been trying to fix for ages now, heres whats on my device,any help appreciated, thanks in advance
AP: i9505xxuame2
CP: i9505xxuame2
CSC: i9505h3gamd8

kevstacey said:
Im having the same problem, no sound or cant make calls
Ive been trying to fix for ages now, heres whats on my device,any help appreciated, thanks in advance
AP: i9505xxuame2
CP: i9505xxuame2
CSC: i9505h3gamd8
Click to expand...
Click to collapse
I actually fixed my problem for a while, cant remember exactly how, then flashed a different ROM thinking I was oK and BAM, no sound again, cant make calls, listen to music nor play videos/youtube etc..
Very frustrating.

Working again now
i installed I9505XXUEMK9_I9505H3GEMJ2_H3G.zip from sammobile .com
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes

FelixCited said:
I actually fixed my problem for a while, cant remember exactly how, then flashed a different ROM thinking I was oK and BAM, no sound again, cant make calls, listen to music nor play videos/youtube etc..
Very frustrating.
Click to expand...
Click to collapse
And to add to this, I dont even KNOW if ive got the old BL or new... because in download mode there is nothing that says KNOX, it just says
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
I dont know if this info helps... ive never taken this long to solve an issue with one of my devices, this truly is frustrating so if anyone can help....thatd be BONZAAAAAAAAAA

kevstacey said:
Working again now
i installed I9505XXUEMK9_I9505H3GEMJ2_H3G.zip from sammobile .com
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Click to expand...
Click to collapse
Oh no kidding... you fixed it?? thats cool, what ROM is that I9505XXUEMK9_I9505H3GEMJ2_H3G ??
Like what region? and do you have a knox status?
Nice work mate

The firmware is for 3 network uk but im guessing if everyone searches the most relevant device to them and update to new firmware it should solve the problem
---------- Post added at 03:22 PM ---------- Previous post was at 03:14 PM ----------
And my Knox status is knox warranty void 0x1 but everything works better than ever

Related

[Q] No sound or wifi after installing custom ROMs and returning to stock.

Hi and thanks for looking at this post,
I have searched the forums and haven't found a thing that works for my phone. I rooted and backed up my current version this morning (4.2.2 stock) using CWM. I then proceded to install Wanamlite 1.5 for the S4 GT-I19505, which installed but had serious issues with sound, everything would crash when the volume controls were pressed or headphones inserted. I therefore switched ROM to Android revolution HD 1.0. I installed what I thought was the relevant wifi fix, but no joy.
At this point, I restored to stock 4.2.2 hoping it would solve the issue, but it hasn't, my cwm backup also has the issue after attempting to restore.
Anyone got any suggestions of how I can fix this? I thought the stock restore would have done this, but obviously not.
I am running android 4.2.2 on a stock rom (XXUAMDD_I9505EVRAMDA_EVR).
GT - I9505
If you need to know anything else, let me know. Thanks.
- Go to CWM
- Make a full wipe (data, system and cache)
- Restore ur old stock backup
- I think this will solve ur problems :highfive:
Joku1981 said:
- Go to CWM
- Make a full wipe (data, system and cache)
- Restore ur old stock backup
- I think this will solve ur problems :highfive:
Click to expand...
Click to collapse
Thanks for the quick response, unfortunately it hasn't worked
I'm assuming it's a kernel issue, but surely that would have been replaced after installing back to stock? Is there anywhere we can download the individual required kernels maybe?
benh84 said:
Thanks for the quick response, unfortunately it hasn't worked
I'm assuming it's a kernel issue, but surely that would have been replaced after installing back to stock? Is there anywhere we can download the individual required kernels maybe?
Click to expand...
Click to collapse
hey bro , since your on 4.2.2 would you mind to flash this via odin by selecting PHONE/CP? download it and extract http://d-h.st/f99 Make sure to turn off your phone manually then go to download mode and flash.
Repulsa said:
hey bro , since your on 4.2.2 would you mind to flash this via odin by selecting PHONE/CP? download it and extract Make sure to turn off your phone manually then go to download mode and flash.
Click to expand...
Click to collapse
Thanks for the help, was a different file from the one I tried earlier, but still no joy with this one either.
There doesn't appear to be a wifi-fix from the list of those files for my version. I'm going to try it, combined with a complete stock reinstall now, to see if there is any change.
benh84 said:
Thanks for the help, was a different file from the one I tried earlier, but still no joy with this one either.
There doesn't appear to be a wifi-fix from the list of those files for my version. I'm going to try it, combined with a complete stock reinstall now, to see if there is any change.
Click to expand...
Click to collapse
as you can see if you flash a wrong LTE modems will break your sound . maybe thats why you loose your sound at all , would you mind booting into download mode and tell what does it says on top left of your screen thank you.
Repulsa said:
as you can see if you flash a wrong LTE modems will break your sound . maybe thats why you loose your sound at all , would you mind booting into download mode and tell what that does it says on top left of your screen thank you.
Click to expand...
Click to collapse
I guess that is what has happened. I've found the right modem fix now, so currently applying with odin as well as a full stock restore.
Top of the download screen says;
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Samsung offical
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: enabled
eMMC BURST MODE: enabled
benh84 said:
I guess that is what has happened. I've found the right modem fix now, so currently applying with odin as well as a full stock restore.
Top of the download screen says;
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Samsung offical
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: enabled
eMMC BURST MODE: enabled
Click to expand...
Click to collapse
there you go newbootloader = need to flash a new Wifi fix/Non-Hlost such as mkf,mj's mke , have a nice day.
After the last install, I now have sound back, but no wifi still...
Repulsa said:
there you go newbootloader = need to flash a new Wifi fix/Non-Hlost such as mkf,mj's mke , have a nice day.
Click to expand...
Click to collapse
Just seen this after my last post. Thanks for the help
benh84 said:
After the last install, I now have sound back, but no wifi still...
Click to expand...
Click to collapse
Download and extract and flash the file GSM_Modem_XXUEMFK_and_LTE_Modem_XXUMFK.tar Turn off your phone manually and flash http://www.mediafire.com/download/zriv6i5c01lqns6/GSM_Modem_XXUEMFK_and_LTE_Modem_XXUMFK.rar file with odin by selecting phone. if your problem still persist , go to recovery and wipe cache and factory reset.
Repulsa said:
Download and extract and flash the file GSM_Modem_XXUEMFK_and_LTE_Modem_XXUMFK.tar Turn off your phone manually and flash http://www.mediafire.com/download/zriv6i5c01lqns6/GSM_Modem_XXUEMFK_and_LTE_Modem_XXUMFK.rar file with odin by selecting phone. if your problem still persist , go to recovery and wipe cache and factory reset.
Click to expand...
Click to collapse
Thanks for the link, Got the phone stuck loading up now. So going to try and revert to the backup and then use odin to flash the file. I'll let you know the outcome.
benh84 said:
Thanks for the link, Got the phone stuck loading up now. So going to try and revert to the backup and then use odin to flash the file. I'll let you know the outcome.
Click to expand...
Click to collapse
Right, well I had sound again but no wifi after installing (I9505XXUEMK9_WiFi_FIX), but after flashing (GSM_Modem_XXUEMFK_and_LTE_Modem_XXUMFK.tar) and wiping all data/cache too, I now have neither again lol getting frustrating now.
benh84 said:
Right, well I had sound again but no wifi after installing (I9505XXUEMK9_WiFi_FIX), but after flashing (GSM_Modem_XXUEMFK_and_LTE_Modem_XXUMFK.tar) and wiping all data/cache too, I now have neither again lol getting frustrating now.
Click to expand...
Click to collapse
I really dont understand why are you trying to revert into your back up? when you can just flash a 4.3 stock rom in order to fix all this problem? then root it after ? just so you know that your warranty is already void sir. so go ahead and make a back up and flash a 4.3 stock rom from samsung website. thank you.
Repulsa said:
I really dont understand why are you trying to revert into your back up? when you can just flash a 4.3 stock rom in order to fix all this problem? then root it after ? just so you know that your warranty is already void sir. so go ahead and make a back up and flash a 4.3 stock rom from samsung website. thank you.
Click to expand...
Click to collapse
Thanks, I'll do that. I was trying to steer clear of 4.3, because of issues I had keeping root access on it, but if that's what will solve these problems then that's fine for me. As for the warranty, I don't mind too much Thanks for all the help again.
benh84 said:
Right, well I had sound again but no wifi after installing (I9505XXUEMK9_WiFi_FIX), but after flashing (GSM_Modem_XXUEMFK_and_LTE_Modem_XXUMFK.tar) and wiping all data/cache too, I now have neither again lol getting frustrating now.
Click to expand...
Click to collapse
Did you manage to fix your sound and wifi? Im having the exact same issues. No matter what I flash I cant get sound! Grr!!
Robotic4 said:
Did you manage to fix your sound and wifi? Im having the exact same issues. No matter what I flash I cant get sound! Grr!!
Click to expand...
Click to collapse
i have no sound in calls, music, notifications and no camera video recording too.. i had flashed google edition 4.4.2 by jamal, but now on stock 4.3 MJ5
strange thing is if I wipe cache and reboot, i get sound in calls and notifications, but if i try to play music ,all sound is gone again...
illikkalshahid said:
i have no sound in calls, music, notifications and no camera video recording too.. i had flashed google edition 4.4.2 by jamal, but now on stock 4.3 MJ5
strange thing is if I wipe cache and reboot, i get sound in calls and notifications, but if i try to play music ,all sound is gone again...
Click to expand...
Click to collapse
H O W DO WE FIX THIS FRIGGEN ISSUE!?!?
Everyone is having this same damn problem, I've had it for about a month, flashed all sorts of roms, wifi fixes, different modems etc
and its not working, I matched my ap cp csc so they are all the same:
Last night it was reading:
AP: I9505XXUFNB8
CP: I9505XXUFNB8
CSC:I9505XXUFNB8
= NO SOUND
Its all the same now except
CP: I9505XXUFNA5
Please help, or even better - if someone has the knowledge to let me know what is actually wrong here and I can then research and fix it myself.
THAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAnks..
same problem here!!! Absolutely no sound on my Galaxy S4.. But I noticed that I have sound only if there is not flashed modem after installing clean rom (Phoenix).. So there must be problem with modem.. But any modem that I tried to flash doesn't trigger the sound, the latest, the oldest... really dont know.... :///////

No Sound, Tried Multiple Fixes i9505

I've got a Samsung Galaxy S4 i9505 Australian Model. The Snapdragon one.
I initially had Omega V10, I upgraded to V18 and the sound turned itself on and off, but then it started rebooting randomly and sound stopped all together. I upgraded to V19 with the same issue of no sound after the first call is made. I re-installed V19, V18 & 10 a few times. I flashed the appropriate modem for my old boot-loader several times on each rom and done clean installs as well.
I then moved to the Pheonix ROM, Installed exactly as the instructions stated. I then installed the modem as per instructions as I was having issues with the GSM/LTE then after the first call sound stopped working all together. I flashed ROM again and again, flashed the modem again, flashed a Wi-Fi Fix modem, flashed the kernel a couple of times and sound still doesn't work. It's every time after the first call is made, it just disappears.
I then decided to do a stock recovery in Odin. I installed official stock firmware XXUBMG4. Still no sound, I was getting the sound on boot but now it's gone all together.
What's my next step here? I'm almost certain I didn't flash an incorrect modem file but maybe I did........Should I try installing official 4.3? Is this something to do with installing a modem that's higher than what I should have installed and now I can't go back but only forward eg: 4.3?
I've lost root now as I flashed the official stock firmware via Odin, I'm happy to do whatever it takes to get the sound working. I'm not fussed at all about warranty.
* #1234# to check software version of phone and pls make us a screenshot :highfive:
Joku1981 said:
* #1234# to check software version of phone and pls make us a screenshot :highfive:
Click to expand...
Click to collapse
Sorry, Couldn't take a screen shot but took a photo. I flashed stock firmware via Odin. I originally had XXUBMH1
Robotic4 said:
Sorry, Couldn't take a screen shot but took a photo. I flashed stock firmware via Odin. I originally had XXUBMH1
Click to expand...
Click to collapse
Download this ONE and flash it. When u finish the process, make us other photo like the post#3
Joku1981 said:
Download this ONE and flash it. When u finish the process, make us other photo like the post#3
Click to expand...
Click to collapse
Cool no worries, I'm downloading now. It say's it's got about an hour.
I'll flash as soon as it's downloaded. Hopefully this works!! If it does I'll be shouting you a drink!!
Robotic4 said:
Cool no worries, I'm downloading now. It say's it's got about an hour.
I'll flash as soon as it's downloaded. Hopefully this works!! If it does I'll be shouting you a drink!!
Click to expand...
Click to collapse
Before you flash the file your downloading now would you mind Downloading and extract this file (You should see GSM_Modem_XXUEMFK_and_LTE_Modem_XXUBMH1.ta r)then flash the http://www.mediafire.com/download/48r0rgqv25s8968/GSM_Modem_XXUEMFK_and_LTE_Modem_XXUBMH1.rar file with odin by selecting phone. I want you to turn off your phone manually and wait a few sec and Press and hold Power+ Volume down Until you reach Download mode. Now open odin and select PHONE/CP and flash away. Have a nice day.
Repulsa said:
Before you flash the file your downloading now would you mind Downloading and extract this file (You should see GSM_Modem_XXUEMFK_and_LTE_Modem_XXUBMH1.ta r)then flash the http://www.mediafire.com/download/48r0rgqv25s8968/GSM_Modem_XXUEMFK_and_LTE_Modem_XXUBMH1.rar file with odin by selecting phone. I want you to turn off your phone manually and wait a few sec and Press and hold Power+ Volume down Until you reach Download mode. Now open odin and select PHONE/CP and flash away. Have a nice day.
Click to expand...
Click to collapse
I just flashed this but it didn't fix the sound, as soon as it loaded I had an error coming up in the notification bar asking me to reboot as something was detected, something along those lines. It's the first time I've seen that error come up...is that something to do with Knox?
I'll flash the file the firmware I'm downloading now in 10 mins then see what happens. Or should I flash the firmware then flash this modem after?
Robotic4 said:
I just flashed this but it didn't fix the sound, as soon as it loaded I had an error coming up in the notification bar asking me to reboot as something was detected, something along those lines. It's the first time I've seen that error come up...is that something to do with Knox?
I'll flash the file the firmware I'm downloading now in 10 mins then see what happens. Or should I flash the firmware then flash this modem after?
Click to expand...
Click to collapse
Okey Im guessing you have the new bootloader since you said "knox" try to download and extract this and flash the http://www.mediafire.com/download/hdzf6fbobotxi61/GSM_Modem_XXUEML4_and_LTE_Modem_XXUML4.rar file with odin by selecting phone. This is a fix only but if the problem still persist feel free to flash the file that other guy gave you. im only giving you this fix just because alot of people had this problem that got fixed.Go to Settings and make sure that modems flashed ok
Repulsa said:
Okey Im guessing you have the new bootloader since you said "knox" try to download and extract this and flash the http://www.mediafire.com/download/hdzf6fbobotxi61/GSM_Modem_XXUEML4_and_LTE_Modem_XXUML4.rar file with odin by selecting phone. This is a fix only but if the problem still persist feel free to flash the file that other guy gave you. im only giving you this fix just because alot of people had this problem that got fixed.Go to Settings and make sure that modems flashed ok
Click to expand...
Click to collapse
Ok no worries. I've already flashed the other firmware that the other person gave me. I'm now flashing this modem as the sound didn't work still. I didn't have Knox until I downloaded the firmware the other person suggested to download. I don't care about voiding Knox as I don't need it or use it.
I'll see what happens when I flash this modem. Thanks!
Ok, so far I've flashed the Official Stock Firmware XXUBMG4. I then flashed the GSM_Modem_XXUEMFK_and_LTE_Modem_XXUBMH1.tar. I then flashed the OPS 4.3 Firmware with Knox, I then flashed the XXUML4 Modem. None of this has fixed the sound, I'm not also getting random reboots every 30 secs or so.
So frustrating!! Why so complicated :S :S
Duplicate post
Robotic4 said:
Ok no worries. I've already flashed the other firmware that the other person gave me. I'm now flashing this modem as the sound didn't work still. I didn't have Knox until I downloaded the firmware the other person suggested to download. I don't care about voiding Knox as I don't need it or use it.
I'll see what happens when I flash this modem. Thanks!
Click to expand...
Click to collapse
If you just got a new bootloader aka Knox warranty Void that's okey , flashing any modem wont void your warranty . But if you flash a custom rom/Root then its over.If your knox got void means no more warranty for your device. Have a nice day.
Robotic4 said:
Duplicate post
Click to expand...
Click to collapse
* #1234# to check software version of phone and pls make us a screenshot again (button power+button home)
Joku1981 said:
* #1234# to check software version of phone and pls make us a screenshot again (button power+button home)
Click to expand...
Click to collapse
So I got the boot up sound after trying I9505XXUEMK9_WiFi_FIX.tar. But then I switched the phone off to insert my SIM Card and booted up to no sound and no sound on anything..
Robotic4 said:
So I got the boot up sound after trying I9505XXUEMK9_WiFi_FIX.tar. But then I switched the phone off to insert my SIM Card and booted up to no sound and no sound on anything..
Click to expand...
Click to collapse
That's good to hear ti works check your msg and let me know here.
Repulsa said:
That's good to hear ti works check your msg and let me know here.
Click to expand...
Click to collapse
hey, i'm having the same issue, what did you suggest... plz help me too:crying:
Repulsa said:
That's good to hear ti works check your msg and let me know here.
Click to expand...
Click to collapse
Yeah still not working. I've tried different versions of Odin and run them as administrator in windows. I've tried 2 USB Cables also, Is it something to do with the PIT file? I was reading something about it from here:
http://forum.cyanogenmod.com/topic/79112-i9505-no-sound-cant-make-calls-or-receive/page__st__20
Robotic4 said:
So I got the boot up sound after trying I9505XXUEMK9_WiFi_FIX.tar. But then I switched the phone off to insert my SIM Card and booted up to no sound and no sound on anything..
Click to expand...
Click to collapse
If u still having MK9 firmware installed in your phone:
Download and unrar this FILE
Use Odin
Untick Autoreboot
Flash modem (the file u downloaded in step one (.tar))
Put off ur battery and put in again
Reboot into Download Mode (Vol Down + Home button combi)
Flash Modem once more
Put off ur battery and put in again
Once done, unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
I have the same problem.I flashed MFK modem over MK9 and I have no sound and I cant even make a call !!! I tried to reflash rom and also make a full wipe but nothing helped.PLease help
---------- Post added at 08:34 PM ---------- Previous post was at 08:19 PM ----------
I JUST HAD TO FLASH THIS MODEM TO GET IT FIXED !!
http://www.mediafire.com/download/48r0rgqv25s8968/GSM_Modem_XXUEMKF_and_LTE_Modem_XXUBMH1.rar
kadett-k2 said:
I have the same problem.I flashed MFK modem over MK9 and I have no sound and I cant even make a call !!! I tried to reflash rom and also make a full wipe but nothing helped.PLease help
---------- Post added at 08:34 PM ---------- Previous post was at 08:19 PM ----------
I JUST HAD TO FLASH THIS MODEM TO GET IT FIXED !!
http://www.mediafire.com/download/48r0rgqv25s8968/GSM_Modem_XXUEMKF_and_LTE_Modem_XXUBMH1.rar
Click to expand...
Click to collapse
Glad that file help's you mate. and yes flashing a wrong Wifi/LTE fix will break your sound on old bootloader.

[Q] HELP - settings force close and no wifi

Someone must know the answer to these 2 questions, I've been searching for days and keep getting little issues, keep resolving them but then run into new issues.
My last 2 problems (I hope) are as follows.
1)
No wifi - here's the details of my modems etc:
AP: I9505XXUFNA5
CP: I9505XXUEMJ5
CSC: I9505OXAFNA5
I'm running WanamLite 2.0 (4.4.2 )
2)
When i go to 'Settings >> More >> Security' it FC's and says Unfortunately, Settings has stopped.
How do I fix these issues??
Thanks
wife fix
You can fix the wifi issue by updating your phone modem to NA5. Unfortunately I'm also stuck on that settings problem. Still haven't found a solution for that yet.
FelixCited said:
Someone must know the answer to these 2 questions, I've been searching for days and keep getting little issues, keep resolving them but then run into new issues.
My last 2 problems (I hope) are as follows.
1)
No wifi - here's the details of my modems etc:
AP: I9505XXUFNA5
CP: I9505XXUEMJ5
CSC: I9505OXAFNA5
I'm running WanamLite 2.0 (4.4.2 )
2)
When i go to 'Settings >> More >> Security' it FC's and says Unfortunately, Settings has stopped.
How do I fix these issues??
Thanks
Click to expand...
Click to collapse
Suggest you flash original stock ROM, root, install recovery and then wipe cache/dalvik /data/system - then flash what ever ROM you like and start again. Careful what stock you choose unless you don't mind/already have new boot loader.
Probably not what you wanted to hear but if you have been stuck with these issues for days it may be the easiest quickest way to resolve
No need to boot up stock ROM, you can simply go straight back into down load mode and flash cf auto root/recovery then boot into recovery.
Jimsilver73 said:
Suggest you flash original stock ROM, root, install recovery and then wipe cache/dalvik /data/system - then flash what ever ROM you like and start again. Careful what stock you choose unless you don't mind/already have new boot loader.
Probably not what you wanted to hear but if you have been stuck with these issues for days it may be the easiest quickest way to resolve
No need to boot up stock ROM, you can simply go straight back into down load mode and flash cf auto root/recovery then boot into recovery.
Click to expand...
Click to collapse
haha thanks man, i actually am having a different issue now although i have by coincidence, flashed back to that same wanam rom that i am unable to get into the security settings with and still has the same error.
I have still got these issues and havent really been able to use my S4 for about a month which is so frustrating...
heres my recent post:
"" Originally Posted by Repulsa
Download and Flash this file via odin by Selecting Phone/CP . and tell me if it works ""
----------
----------
Hey OP / kasperwo - did this work?? I'm having the same issues. Repulsa helped me before (thanks again) but then I went and flashed a different rom and the same problem came back. i think there was an underlying issue that basically was "covered by a bandaid" and which reappeared after flashing a new rom (CM11 i think)
so after all this i downloaded the stock german 4.4.2 leak, wifi stopped working, lost root access.
Then was able to flash Philz Touch recovery, re rooted using that, then flashed a different rom (wanamLite) and still no wifi etc
Last night it was reading:
AP: I9505XXUFNA5
CP: I9505XXUFNA5
CSC:I9505XXUFNA5
Its all the same now except
CP: I9505XXUFNB8
Any help is much appreciated
FelixCited said:
haha thanks man, i actually am having a different issue now although i have by coincidence, flashed back to that same wanam rom that i am unable to get into the security settings with and still has the same error.
I have still got these issues and havent really been able to use my S4 for about a month which is so frustrating...
heres my recent post:
"" Originally Posted by Repulsa
Download and Flash this file via odin by Selecting Phone/CP . and tell me if it works ""
----------
----------
Hey OP / kasperwo - did this work?? I'm having the same issues. Repulsa helped me before (thanks again) but then I went and flashed a different rom and the same problem came back. i think there was an underlying issue that basically was "covered by a bandaid" and which reappeared after flashing a new rom (CM11 i think)
so after all this i downloaded the stock german 4.4.2 leak, wifi stopped working, lost root access.
Then was able to flash Philz Touch recovery, re rooted using that, then flashed a different rom (wanamLite) and still no wifi etc
Last night it was reading:
AP: I9505XXUFNA5
CP: I9505XXUFNA5
CSC:I9505XXUFNA5
Its all the same now except
CP: I9505XXUFNB8
Any help is much appreciated
Click to expand...
Click to collapse
Suggest you go to this thread: http://forum.xda-developers.com/showthread.php?t=2192025 and read and learn about modems, I suspect you may find the answers there.
What happens when you flash official 4.3 firmware?
You may be well to backup your SD card, then flash official firmware, before rooting go to stock recovery and wipe data from there. This will leave your phone brand new with only stock files on there, it will format EVERYTHING!
May be worth a go
Jimsilver73 said:
Suggest you go to this thread: http://forum.xda-developers.com/showthread.php?t=2192025 and read and learn about modems, I suspect you may find the answers there.
What happens when you flash official 4.3 firmware?
You may be well to backup your SD card, then flash official firmware, before rooting go to stock recovery and wipe data from there. This will leave your phone brand new with only stock files on there, it will format EVERYTHING!
May be worth a go
Click to expand...
Click to collapse
Thanks for the tips, I actually did that last night with stock 4.4.2 firmware. Im going to try the 4.3 tonight as I suspect I may by some miracle, still have the old bootloader and is not tripped yet.
I just installed a foxhound rom - 3.6 and now wifi works (sound doesnt)
Cheers
FelixCited said:
Thanks for the tips, I actually did that last night with stock 4.4.2 firmware. Im going to try the 4.3 tonight as I suspect I may by some miracle, still have the old bootloader and is not tripped yet.
I just installed a foxhound rom - 3.6 and now wifi works (sound doesnt)
Cheers
Click to expand...
Click to collapse
hmm - from what I have read on the thread about modems I sent you the link to (have you read it yet?) this is to do with having new modem on old bootloader - it breaks sound and/or wifi.
You need to get the right modem for your bootloader - 4.3 I think, but check the thread
Jimsilver73 said:
hmm - from what I have read on the thread about modems I sent you the link to (have you read it yet?) this is to do with having new modem on old bootloader - it breaks sound and/or wifi.
You need to get the right modem for your bootloader - 4.3 I think, but check the thread
Click to expand...
Click to collapse
Nope havent read the whole thread but very familiar with it. Is there any particular page I should look at? And how are we supposed to figure out what bootloader you have/which modem to flash? Thats what ive been trying to figure out this whole time
FelixCited said:
Nope havent read the whole thread but very familiar with it. Is there any particular page I should look at? And how are we supposed to figure out what bootloader you have/which modem to flash? Thats what ive been trying to figure out this whole time
Click to expand...
Click to collapse
When you put your phone into download mode do you see red and yellow writing in the top left hand corner - if so you have new bout loader, if not old - that should help you work out which modem you need.
What happened when you flashed official 4.3 through Odin and wipe?
Jimsilver73 said:
hmm - from what I have read on the thread about modems I sent you the link to (have you read it yet?) this is to do with having new modem on old bootloader - it breaks sound and/or wifi.
You need to get the right modem for your bootloader - 4.3 I think, but check the thread
Click to expand...
Click to collapse
ANND :
i am sort of at the point where I dont care about tripping knox.. So if I have to flash a different bootloader (which I already thought I had done) how do I find which one to flash?
I just want it FIXED my S2 that im using is so damn slow and has issues of its own
Jimsilver73 said:
When you put your phone into download mode do you see red and yellow writing in the top left hand corner - if so you have new bout loader, if not old - that should help you work out which modem you need.
What happened when you flashed official 4.3 through Odin and wipe?
Click to expand...
Click to collapse
Thanks for the responses dude, I've done SO MUCH reading but it seems everyone else is fixing it but when I try their methods it just doesnt work for me...
I didnt end up flashing the 4.3 - it got to 98% downloaded and then failed so I have to restart the DL and try again
FelixCited said:
Thanks for the responses dude, I've done SO MUCH reading but it seems everyone else is fixing it but when I try their methods it just doesnt work for me...
I didnt end up flashing the 4.3 - it got to 98% downloaded and then failed so I have to restart the DL and try again
Click to expand...
Click to collapse
And do you have new knox bootloader (red and yellow writing when you boot)?
Jimsilver73 said:
And do you have new knox bootloader (red and yellow writing when you boot)?
Click to expand...
Click to collapse
Nope, in download mode there is nothing that says KNOX, it just says
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
FelixCited said:
Nope, in download mode there is nothing that says KNOX, it just says
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
Click to expand...
Click to collapse
OK - so you have no red and yellow small writing when you boot up that says something along the lines of non seandroid kernel?
EDIT: so it seems you are on old bootloader - if you have no knox references - which means that if you have flashed xxufna1 with non HLOS modem that would break stuff - like I said before, I think you really need to flash official 4.3 (which will give you the right modems) - test and see if it all works and then go from there
When you want to update modem then just update gsm modem - I use this one XXUFNB8
Jimsilver73 said:
OK - so you have no red and yellow small writing when you boot up that says something along the lines of non seandroid kernel?
EDIT: so it seems you are on old bootloader - if you have no knox references - which means that if you have flashed xxufna1 with non HLOS modem that would break stuff - like I said before, I think you really need to flash official 4.3 (which will give you the right modems) - test and see if it all works and then go from there
When you want to update modem then just update gsm modem - I use this one XXUFNB8
Click to expand...
Click to collapse
Yeah no SEandroid entry. It's red and grey writing from memory. I've finally been able to complete the download, will try flashing now.
Jimsilver73 said:
OK - so you have no red and yellow small writing when you boot up that says something along the lines of non seandroid kernel?
EDIT: so it seems you are on old bootloader - if you have no knox references - which means that if you have flashed xxufna1 with non HLOS modem that would break stuff - like I said before, I think you really need to flash official 4.3 (which will give you the right modems) - test and see if it all works and then go from there
When you want to update modem then just update gsm modem - I use this one XXUFNB8
Click to expand...
Click to collapse
ARGGGGGH
no luck... even worse than before as wifi isnt working now... i'll have to flash back to Omega 16
EDIT:
Thats a lie - i just checked and sound is working. So thats a good sign... Now I think it'd be a matter of flashing the correct modem which should fix wifi am i right?
Currently on:
AP: xxuemk9
CP: xxuemj5
xxuemk9csc: i9505H3GEMJ2
FelixCited said:
ARGGGGGH
no luck... even worse than before as wifi isnt working now... i'll have to flash back to Omega 16
EDIT:
Thats a lie - i just checked and sound is working. So thats a good sign... Now I think it'd be a matter of flashing the correct modem which should fix wifi am i right?
Currently on:
AP: xxuemk9
CP: xxuemj5
xxuemk9csc: i9505H3GEMJ2
Click to expand...
Click to collapse
So you have flashed stock 4.3 through Odin now then?
Jimsilver73 said:
So you have flashed stock 4.3 through Odin now then?
Click to expand...
Click to collapse
ITS W O R K I N G
FINALLY
That only took a whole frggen month.
Thanks heaps for the ideas man I really appreciate it.
After flashing that 4.3 XXUEMK9_I9505H3GEMJ2_H3G i noticed sound was working, then I flashed PhilzTouch recovery through Odin, flashed
GSM_Modem_XXUEMJ9_and_LTE_Modem_XXUBMH1.tar
After that I did a ROM wipe in PhilzTouch and flashed Omega v16, booted up and YES FINALLY I have wifi, sound and everything is working...
BUT now im back in square 1 really, i originally wanted to flash something different because the battery life on Omega v16 isnt that great on my phone for whatever reason...
But hey at least I can use it now.
FelixCited said:
ITS W O R K I N G
FINALLY
That only took a whole frggen month.
Thanks heaps for the ideas man I really appreciate it.
After flashing that 4.3 XXUEMK9_I9505H3GEMJ2_H3G i noticed sound was working, then I flashed PhilzTouch recovery through Odin, flashed
GSM_Modem_XXUEMJ9_and_LTE_Modem_XXUBMH1.tar
After that I did a ROM wipe in PhilzTouch and flashed Omega v16, booted up and YES FINALLY I have wifi, sound and everything is working...
BUT now im back in square 1 really, i originally wanted to flash something different because the battery life on Omega v16 isnt that great on my phone for whatever reason...
But hey at least I can use it now.
Click to expand...
Click to collapse
Glad you are all sorted - if you are looking for good battery life and performance (the holy grail lol) maybe try my set up as in the links in my signature. I would recommend not flashing modem to start with as what you have works for you now. I can whole heatedly recommend slim + alucard, I get 5 hours screen on time over 24 hours use with fantastic performance oh, and a load of awesome features with slim too
Jimsilver73 said:
Glad you are all sorted - if you are looking for good battery life and performance (the holy grail lol) maybe try my set up as in the links in my signature. I would recommend not flashing modem to start with as what you have works for you now. I can whole heatedly recommend slim + alucard, I get 5 hours screen on time over 24 hours use with fantastic performance oh, and a load of awesome features with slim too
Click to expand...
Click to collapse
Trust me dude, Im gald its sorted too
Ok cool I'll try out your recommendation. Which version should I use? 4.4.2?
And if i flash the zip will it also flash the modem and screw my phone up again?

[Q] WiFi not working after update via Kies from 4.3. to 4.4.2

Hi there,
i have a rooted S4 i9505 with cwm installed.
yesterday i did an update from stock rom 4.3 to 4.4.2 (I9505XXUEMKE) via KIES.
the problem now....I cant turn on the wifi anymore. whenever i try to use the on/off switch for the wifi it instandly switches back to off.
is anyone else experiencing the same problem? has someone already a solution for that, before i will do a factory reset.
SDA1979 said:
Hi there,
i have a rooted S4 i9505 with cwm installed.
yesterday i did an update from stock rom 4.3 to 4.4.2 (I9505XXUEMKE) via KIES.
the problem now....I cant turn on the wifi anymore. whenever i try to use the on/off switch for the wifi it instandly switches back to off.
is anyone else experiencing the same problem? has someone already a solution for that, before i will do a factory reset.
Click to expand...
Click to collapse
hmm - shouldn't really be a problem if you flashed stock, but broken wifi is a symptom reported when flashing old modem on new bootloader, if you have new stock sammy 4.4 then you will surely have new bootloader (check though by putting your phone into download mode and then check for KNOX references - if you got them you got new bootloader, if no then you are on the old one)
Click on the link in my sig for modem - that will take you to a thread that has all the newest modems - have a look through the most recent last 3-4 pages and you will find packages for modems for new bootloader, flash one of these and see what happens - BTW you need to flash in odin with 'reboot' unchecked, then when its finished power off your phone manually then put back into download mode and flash again, then repeat the procedure but this time tick 'reboot' and that should be done. BTW - the tar file goes into 'phone' not csc. You may need to unzip the modem package to get the tar file.
Let us know how you got on
Jimsilver73 said:
hmm - shouldn't really be a problem if you flashed stock, but broken wifi is a symptom reported when flashing old modem on new bootloader, if you have new stock sammy 4.4 then you will surely have new bootloader (check though by putting your phone into download mode and then check for KNOX references - if you got them you got new bootloader, if no then you are on the old one)
Click on the link in my sig for modem - that will take you to a thread that has all the newest modems - have a look through the most recent last 3-4 pages and you will find packages for modems for new bootloader, flash one of these and see what happens - BTW you need to flash in odin with 'reboot' unchecked, then when its finished power off your phone manually then put back into download mode and flash again, then repeat the procedure but this time tick 'reboot' and that should be done. BTW - the tar file goes into 'phone' not csc. You may need to unzip the modem package to get the tar file.
Let us know how you got on
Click to expand...
Click to collapse
ok just to be sure and not bricking my phone..
i went into download mode and it says:
odin mode
product name gt-i9505
current binary custom
system status official
knox kernel lock 0x0
knox warranty void 0x1csb-config-lsb 0x30
write protection enabled
eMMC burst mode enabled
now if i understood right, i have to download
Wifi fix/NON-HLOS - I9505_XXUFNB8_WiFi_FIX
and flash it with odin with the instruction above....
is that correct?
i also found XXUFNB8.... should i rather use this one?
SDA1979 said:
ok just to be sure and not bricking my phone..
i went into download mode and it says:
odin mode
product name gt-i9505
current binary custom
system status official
knox kernel lock 0x0
knox warranty void 0x1csb-config-lsb 0x30
write protection enabled
eMMC burst mode enabled
now if i understood right, i have to download
Wifi fix/NON-HLOS - I9505_XXUFNB8_WiFi_FIX
and flash it with odin with the instruction above....
is that correct?
i also found XXUFNB8.... should i rather use this one?
Click to expand...
Click to collapse
Its correct
SDA1979 said:
ok just to be sure and not bricking my phone..
i went into download mode and it says:
odin mode
product name gt-i9505
current binary custom
system status official
knox kernel lock 0x0
knox warranty void 0x1csb-config-lsb 0x30
write protection enabled
eMMC burst mode enabled
now if i understood right, i have to download
Wifi fix/NON-HLOS - I9505_XXUFNB8_WiFi_FIX
and flash it with odin with the instruction above....
is that correct?
i also found XXUFNB8.... should i rather use this one?
Click to expand...
Click to collapse
you are on the new bootloader so you can flash the complete package - it has everything in it all in one package! - you won't brick your phone even if you flash the wrong modem, that is unless you did some thing real dumb like flash i9500 modem and even then I think its recoverable not that I suggest you try!!
depends where you are in the world - I used NB8 and it worked well for me in the UK - I'm on NB9 now and that seems nice also.
so to be clear flash this:
Combined package
For NewBootloader
GSM_Modem_XXUFNB8_and_LTE_Modem_XXUFNB8
https://mega.co.nz/#!3dR30JiT!cP5WrUCfz9L4h8doY7KTTV6fq4pFL85EkJBG6T-Gqhc
Jimsilver73 said:
you are on the new bootloader so you can flash the complete package - it has everything in it all in one package! - you won't brick your phone even if you flash the wrong modem, that is unless you did some thing real dumb like flash i9500 modem and even then I think its recoverable not that I suggest you try!!
depends where you are in the world - I used NB8 and it worked well for me in the UK - I'm on NB9 now and that seems nice also.
so to be clear flash this:
Combined package
For NewBootloader
GSM_Modem_XXUFNB8_and_LTE_Modem_XXUFNB8
https://mega.co.nz/#!3dR30JiT!cP5WrUCfz9L4h8doY7KTTV6fq4pFL85EkJBG6T-Gqhc
Click to expand...
Click to collapse
hey guys, thank you!!!
the Wi-Fi is working again.
Nonetheless i still have one problem remaining, which i thought it would have been fixed as well.
but, when GPS is turned on, it tries to find the GPS position and the icon on the status bar continues appearing and disappearing permanently (every half of a second).
Beside the fact that it is really annoying having this icon flashing all the time it also causes the display to freeze.
Especially when scrolling from top to the bottom to open the notification area.
It sometimes also lets the system crush completely.
any idea what this could be?
thanks for your effort so far.
SDA1979 said:
hey guys, thank you!!!
the Wi-Fi is working again.
Nonetheless i still have one problem remaining, which i thought it would have been fixed as well.
but, when GPS is turned on, it tries to find the GPS position and the icon on the status bar continues appearing and disappearing permanently (every half of a second).
Beside the fact that it is really annoying having this icon flashing all the time it also causes the display to freeze.
Especially when scrolling from top to the bottom to open the notification area.
It sometimes also lets the system crush completely.
any idea what this could be?
thanks for your effort so far.
Click to expand...
Click to collapse
hmmm......... thats not right!
Suggest you find a stock sammy ROM and flash anew in odin - then root using cf root, then flash recovery - (TWRP is very good :good then go into recovery and wipe cache, dalvik, system and data - reboot and see what happens on nice new shiny sammy stock - if all is good pick the ROM/kernel you want (if you want) and go back to odin to reflash modem.
The only other thing I can think is that you have an app that is messing with gps?? Do the above though and you should be golden :good:
EDIT: don't wipe system unless you planning flashing a different ROM through recovery!
Jimsilver73 said:
hmmm......... thats not right!
Suggest you find a stock sammy ROM and flash anew in odin - then root using cf root, then flash recovery - (TWRP is very good :good then go into recovery and wipe cache, dalvik, system and data - reboot and see what happens on nice new shiny sammy stock - if all is good pick the ROM/kernel you want (if you want) and go back to odin to reflash modem.
The only other thing I can think is that you have an app that is messing with gps?? Do the above though and you should be golden :good:
Click to expand...
Click to collapse
Hi, right way to flash the stock Samsung package, but after flashing a custom recovery, do not wipe system. There's no ROM after that so phone will not boot. And the newest modem is integrated in the stock package, so no need to flash it again.
And another advice: NEVER use Kies to update your phone. It has bricked 3 of mines.:cyclops:
speedwayfan75 said:
Hi, right way to flash the stock Samsung package, but after flashing a custom recovery, do not wipe system. There's no ROM after that so phone will not boot. And the newest modem is integrated in the stock package, so no need to flash it again.
And another advice: NEVER use Kies to update your phone. It has bricked 3 of mines.:cyclops:
Click to expand...
Click to collapse
Oops, well spotted! Yes, don't wipe system unless you have another ROM to flash through recovery. 3 phones bricked from kies huh? I never used it SVD don't think I ever will lol. Good old Sammy stock stuff, tbh that's why I steer well clear of anything stock Sammy unless absolutely necessary and last resort - I look at the farce they have made by forcing us to accept Knox pox!
Jimsilver73 said:
Oops, well spotted! Yes, don't wipe system unless you have another ROM to flash through recovery. 3 phones bricked from kies huh? I never used it SVD don't think I ever will lol. Good old Sammy stock stuff, tbh that's why I steer well clear of anything stock Sammy unless absolutely necessary and last resort - I look at the farce they have made by forcing us to accept Knox pox!
Click to expand...
Click to collapse
my thought was to go into recovery mode and wipe everything and start from beginning in order to exclude that it could depends on some wrong settings or any software already installed....
I updated to 4.4.2 using Mobile Odin and my wifi was borked too.
I did notice after the update that there was a mismatch between my Baseband version (still the old 4.3 XXUEMKE) and the Build number XXUFNB8, and I recall seeing some message during the flashing process that security had blocked the kernel update and Triangle Away might help solve it.
I therefore ran Triangle Away to reset my flash counter, and then used Mobile Odin to have a second go at flashing just the Kernel, Recovery and Modem parts.
This was successful and I now have matching Baseband and Build, both XXUFNB8.
And my wifi now works again...
ok.. after making a factory reset wifi and gps are working fine again.
guess there was some missconfigured third party app...
but now, with a fresh system i do not understand why i am not able to assign a PIN for my lockscreen...
everything is greyed out except PIN and Password.
but even though setting up a PIN, the screen lock is always set to use Swipe......
damn, i shouldnt have updated to 4.4.2.... until now.. only problems with this new build....
SDA1979 said:
ok.. after making a factory reset wifi and gps are working fine again.
guess there was some missconfigured third party app...
but now, with a fresh system i do not understand why i am not able to assign a PIN for my lockscreen...
everything is greyed out except PIN and Password.
but even though setting up a PIN, the screen lock is always set to use Swipe......
damn, i shouldnt have updated to 4.4.2.... until now.. only problems with this new build....
Click to expand...
Click to collapse
Try slimkat 3.2 from here http://www.slimroms.net/index.php/downloads/dlsearch/viewcategory/909-jfltexx remember to download gapps and flash after you have flashed ROM. You won't be disappointed
Jimsilver73 said:
Try slimkat 3.2 from here http://www.slimroms.net/index.php/downloads/dlsearch/viewcategory/909-jfltexx remember to download gapps and flash after you have flashed ROM. You won't be disappointed
Click to expand...
Click to collapse
hey thanks for your suggestion. but i want to keep using the stock rom. sufficent for my needs....
anyway.. finally i was able to get everything working after flashing the rom with odin again.
Jimsilver73 said:
hmm - shouldn't really be a problem if you flashed stock, but broken wifi is a symptom reported when flashing old modem on new bootloader, if you have new stock sammy 4.4 then you will surely have new bootloader (check though by putting your phone into download mode and then check for KNOX references - if you got them you got new bootloader, if no then you are on the old one)
Click on the link in my sig for modem - that will take you to a thread that has all the newest modems - have a look through the most recent last 3-4 pages and you will find packages for modems for new bootloader, flash one of these and see what happens - BTW you need to flash in odin with 'reboot' unchecked, then when its finished power off your phone manually then put back into download mode and flash again, then repeat the procedure but this time tick 'reboot' and that should be done. BTW - the tar file goes into 'phone' not csc. You may need to unzip the modem package to get the tar file.
Let us know how you got on
Click to expand...
Click to collapse
I feel compelled to express my gratitude for the post. Two days ago i updated from 4.3 to 4.4.2 on my rooted gt-i9505 via KIES and just like that no more wifi. This solution works like charm!!!
:good::good::good::good::good::good:

[Q] How to fix I9505; no sound, no mic, phone app not responding

Summary: my I9505 mic, earpiece and speaker don't seem to work and cause fc/not responding on functions that use them (phone), what should I do to resolve? (I have flashed a bunch of ROMs, and a couple modems...).
Detail:
Ok, so firstly I must apologise for not recalling the somewhat random sequence of events which has brought me to this juncture... I was fiddling around with a few different ROMs and when I noticed the problem I sort of frantically tried flashing things to fix it (yes, I'm aware this is a very sensible approach )
I've flashed a few different ROMs and at some point flashed a new modem.
I noticed yesterday that I was not getting any sounds out of my phone, noticed when using the volume buttons, no beep; further investigation revealed the speaker, earpiece and microphone seem to have decided to take an indefinite nap...
Any suggestions on how to proceed with waking them up?!
There is a message in the logcat:
getDeviceForStrategy() speaker device not found
Though not sure if this helps at all.
Making/receiving phonecalls the screen goes black and either rings out to voicemail before I can answer, then displays not responding wait/close error or the other person answers and neither side can hear then same not responding error.
I've not changed the bootloader (as far as I'm aware...).
Wifi/mobile internet work fine.
Tried flashing an old modem, factory resetting, reflashing a ROM (currently CM10.2) but no dice... since I'm a bit lost I figured stop fiddling and ask for help
Current baseband: I9505ZHUAME3
Current bootloader: I9505ZHUBMF4
Any suggestions on how to proceed to un-screw my phone would be greatly appreciated. :good:
mrlizard123 said:
Any suggestions on how to proceed to un-screw my phone would be greatly appreciated. :good:
Click to expand...
Click to collapse
Try to download and flash this file via odin by selecting phone.cp .
WiFi fix for audio?
Repulsa said:
Try to download and flash this file via odin by selecting phone.cp .
Click to expand...
Click to collapse
Thanks for the reply; downloaded, flashed as CP seemed successful but still no joy, same no sound and unresponsive phone app
It says WiFi fix; WiFi is working, how would this fix the audio problem? (not being snarky, just curious as to the relation to the problem)
mrlizard123 said:
Thanks for the reply; downloaded, flashed as CP seemed successful but still no joy, same no sound and unresponsive phone app
It says WiFi fix; WiFi is working, how would this fix the audio problem? (not being snarky, just curious as to the relation to the problem)
Click to expand...
Click to collapse
Flashing a wrong LTE/Wifi fix will loose your sound . in Old bootloader you can't flash any newer LTE modem than UBMH1.and for the New bootloader you can flash all the new LTE modems, including MKF etc.. So boot your phone into download mode and check if you have an entry of knox warranty void then you have newbootloader. and make sure you manually turn off your phone and wait atleast 10 sec and boot your phone into download mode and flash . (Because sometimes flashing a modem/lte doesnt work and need to do it twice.
Use Odin
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Power+Voldown)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Repulsa said:
Flashing a wrong LTE/Wifi fix will loose your sound .
Click to expand...
Click to collapse
Ok cheers
Repulsa said:
in Old bootloader you can't flash any newer LTE modem than UBMH1.and for the New bootloader you can flash all the new LTE modems, including MKF etc..
Click to expand...
Click to collapse
Do you suggest I flash a newer bootloader? if so, how to decide which?
Repulsa said:
So boot your phone into download mode and check if you have an entry of knox warranty void then you have newbootloader.
Click to expand...
Click to collapse
There is no mention of knox, it just says:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
Repulsa said:
and make sure you manually turn off your phone and wait atleast 10 sec and boot your phone into download mode and flash . (Because sometimes flashing a modem/lte doesnt work and need to do it twice.
Click to expand...
Click to collapse
What am I flashing? The WiFi fix you linked above? I flashed that using this method and it hasn't made any difference.
Repulsa said:
Use Odin
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Power+Voldown)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Click to expand...
Click to collapse
With which modem? I've tried that twice to no avail.
Thanks for your continued help, it's appreciated.
mrlizard123 said:
Ok cheers
Do you suggest I flash a newer bootloader? if so, how to decide which?
There is no mention of knox, it just says:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
What am I flashing? The WiFi fix you linked above? I flashed that using this method and it hasn't made any difference.
With which modem? I've tried that twice to no avail.
Thanks for your continued help, it's appreciated.
Click to expand...
Click to collapse
Thas good your still in Oldbootloader try this one If the problem still persist , since your still in oldbootloader flash a 4.2.2 Stock rom , check it from here and download the one that base from your country. Remember 4.2.2 ! not 4.4.2 . instead writing thanks please hit that thanks button >
mrlizard123 said:
I flashed that using this method and it hasn't made any difference.
Click to expand...
Click to collapse
Well I'll be...
I was bored and waiting for the next piece of advice and thought I'd give it another shot and it seems to have worked!
Thanks very much!
mrlizard123 said:
Well I'll be...
I was bored and waiting for the next piece of advice and thought I'd give it another shot and it seems to have worked!
Thanks very much!
Click to expand...
Click to collapse
Hehe so its working now ?? then thats a good news.
Repulsa said:
Hehe so its working now ?? then thats a good news.
Click to expand...
Click to collapse
Yes indeed! Thanks again!
I'm now wondering whether I should upgrade to a newer bootloader? Is it worth it and can it be done without getting into knox related issues?
mrlizard123 said:
Yes indeed! Thanks again!
I'm now wondering whether I should upgrade to a newer bootloader? Is it worth it and can it be done without getting into knox related issues?
Click to expand...
Click to collapse
Im still in oldbootloader and i just download and flash a custom rom 4.4.2 via recovery .. and incase something wrong with my phone in a future . iE Hardware related.etc theni can just flash a 4.2.2 and send it for repair for free... and about newbootloader , flashing any custom rom/rooting will triggered your knox , so feel free to flash the latest stock 4.4.2 kitkat if you dont care about your Warranty. But like i said you can still flash a 4.4.2 custom rom without flashing a newbootloader (Never flash a newbootloader , Make sure to ask first before flashing anything) Have a nice day.
Edited: @mrlizard123 Never flash a latest Wifi fix so you wont get this problem again. only flash a GSM MODEM. if your flashing a custom 4.4.2 rom then you need to flash a latest GSM MODEM base from your country. in order to fix dropping signal issue when the phone went to sleep.

Categories

Resources