My n9005 was with cyanogenmod11 nightly january 30.... suddenly touchscreen dont work and i try to reboot... My note 3 was bootloop.... i try to flash with odin... and odin fail... finally with a pit file i flash my note 3 with a stock rom, but touchscreen works fine with spen but not work with fingers ...... why??? i cant solve it???? please....help!!!
Today.. Battery off... And when i restart my Phone.... Works normally.... Misteryyyyy???
Related
Hi.
In first case.. Sorry for my English
I have a little problem with the touchscreen on my Galaxy S.
I think it's something with firmware. Sometimes don't work about 20-30 pixels on the left and the right side.
It makes me mad, because i need move the widget from one screen to next one, and isn't working. So, i have to open SGS tools, and do TSP update (touchscreen firmwareversion). After update is Pass on the screen and everything works perfectly, BUT only for a moment (sometimes few hours, max one day).
Then i have to do everything again
Does anyone know what to do?
try to make a nandroid backup and then reflash your firmware or do an hard reset and see what happens
No, this isn't working.. I had a lot of different ROM and I did hard reset etc. (2.1, 2.2, 2.2.1)(JPU, JPY, JM1/2)
Now I have Darky ROM 7.7 and OCUV Kernel. I thing, somewhere in phone is correct firmware, because when I did update I don't have to turn on wifi or 3g. Update is working offline and then everything work..
I recently tried changing my theme, i rooted my phone, Downloaded ROM manager and Clockworkmod, when i installed it all, it bricked my phone- I unbricked it by updating the firmware with Odin, but now the touchscreen is not working - At Alll.
Help :\
Hi! I have a problem with my Samsung I9505. I have Omega v19 based on firmware XXUEML6 Android 4.3 and I decided to flash a stock firmware I9505XXUEMKF_I9505COAEMJ8_COA. Unfortunately I had some issues and I don't know why. Fortunately I had philz_touch_5.18.9-i9505.tar cwm and was able to flash Omega v19 back. Everything its working fine but the dial and the sound. I don't have any sound, meaning I can't hear anything, no music no ringtones, nothing. And the second problem its the dial. So in the main screen I touch the phone widget everything its working fine but when I try to call someone my screen goes all black and starts to flicker and nothing happens, only after aprox 10 SECONDS appears the dialing screen but I cant hear the other person and neither can he. I don't know if its soft bricked or bricked but please help someone. I told you besides this two problems everything works well and even cwm and download mode. PLEASE HELP!!!
demoskino said:
Hi! I have a problem with my Samsung I9505. I have Omega v19 based on firmware XXUEML6 Android 4.3 and I decided to flash a stock firmware I9505XXUEMKF_I9505COAEMJ8_COA. Unfortunately I had some issues and I don't know why. Fortunately I had philz_touch_5.18.9-i9505.tar cwm and was able to flash Omega v19 back. Everything its working fine but the dial and the sound. I don't have any sound, meaning I can't hear anything, no music no ringtones, nothing. And the second problem its the dial. So in the main screen I touch the phone widget everything its working fine but when I try to call someone my screen goes all black and starts to flicker and nothing happens, only after aprox 10 SECONDS appears the dialing screen but I cant hear the other person and neither can he. I don't know if its soft bricked or bricked but please help someone. I told you besides this two problems everything works well and even cwm and download mode. PLEASE HELP!!!
Click to expand...
Click to collapse
Boot into download mode and Try and flash the .Tar file via odin.
demoskino said:
Hi! I have a problem with my Samsung I9505. I have Omega v19 based on firmware XXUEML6 Android 4.3 and I decided to flash a stock firmware I9505XXUEMKF_I9505COAEMJ8_COA. Unfortunately I had some issues and I don't know why. Fortunately I had philz_touch_5.18.9-i9505.tar cwm and was able to flash Omega v19 back. Everything its working fine but the dial and the sound. I don't have any sound, meaning I can't hear anything, no music no ringtones, nothing. And the second problem its the dial. So in the main screen I touch the phone widget everything its working fine but when I try to call someone my screen goes all black and starts to flicker and nothing happens, only after aprox 10 SECONDS appears the dialing screen but I cant hear the other person and neither can he. I don't know if its soft bricked or bricked but please help someone. I told you besides this two problems everything works well and even cwm and download mode. PLEASE HELP!!!
Click to expand...
Click to collapse
think if you flash your modem via odin , it will work fine.
problem resolved! !!
bc_1 said:
think if you flash your modem via odin , it will work fine.
Click to expand...
Click to collapse
Fortunately I resolved my problem. It was a bootloader problem. I tried to flash the new Omega v.22 kitkat4.4.2 but had the old bootloader. After flashing the new One the problem was resolved. Thank you for your help
Same problem but all my sensors show pass via *#0*# sensor checks. Tried nordic i9505 I9505XXUFNB9_I9505NEEFNB2_I9505XXUFNB9_HOME.tar 4.4.2, then SIngapore I9505XXUFNBE_I9505OLBFNB3_I9505XXUFNBE_HOME.tar 4.4.2 all the fken same problem. Screen rotation all fine when I flash firmware, root, then flash CWM touch - everything good. Screen rotate works until the first reboot after all of this which might even be a day or 2 later. As soon as reboot phone, screen rotation dies and it is a huge pain in the arse. Sensors continue to say pass via *#0*#. Every few days i have to re-flash firmware, re-root, then re-CWM touch, no need to factory reset just those 3 steps. Has anyone got any solutions for this yet??
:crying::crying::crying::crying::crying:
I read that if you debloat something like samsung hub on kitkat rotation will stop working.
Maybe you can try reflash firmware again without debloat or debloat but left samsung hub on your phone.
Sent from my GT-I9500 using xda app-developers app
Hi, I have a huge problem with my Samsung galaxy note 4. When i try reset it to the stock firmware its freezing all the time, 24/7 non-stop every sec..
I tryed all the Android vertions and firmware from my country (Norway) and France.
The weird thing about this is that when i boot a custom rom with a custom bl, the freezing is gone. But there are so meny glitches and bugs with all the roms can find.
Any solutions?
go on cm13 , it hlped for some ppl, i have same problem as u do and i tryed evrything no HLP!! pHONE freez turn off reset, drop in download menu ... broken!
CM13
Thanks for the suggestion, but I have tried that one.
Sont work for my phone ;(
Hi Guys
I have a N910F Runing 5.1.1 working fine but I have a big issue when I switch off or Restart the phone it won't boot up so I have to pull out the battery and let it for 1 minute or more then it boots up somtimes it gives me emmc error
The problem started when I updated to 6.0.1 then I tryed flashing the 4 files firmware with PIT for both LL and MM but with no avail the same symptoms so I decided to flash TWRP and Keyubi V5 Rom it's Smooth but not able to restart the phone or switch off to switch on again the only thing thats working is the Hot reboot. I need you guys to help me sometimes I need to switch off my phone so I don't have to take the battery out everytime I want to switch on the Phone
I will be glad to hear some suggestions or fixs please.
Thank you
AndroMor said:
Hi Guys
I have a N910F Runing 5.1.1 working fine but I have a big issue when I switch off or Restart the phone it won't boot up so I have to pull out the battery and let it for 1 minute or more then it boots up somtimes it gives me emmc error
The problem started when I updated to 6.0.1 then I tryed flashing the 4 files firmware with PIT for both LL and MM but with no avail the same symptoms so I decided to flash TWRP and Keyubi V5 Rom it's Smooth but not able to restart the phone or switch off to switch on again the only thing thats working is the Hot reboot. I need you guys to help me sometimes I need to switch off my phone so I don't have to take the battery out everytime I want to switch on the Phone
I will be glad to hear some suggestions or fixs please.
Thank you
Click to expand...
Click to collapse
So, you're running 5.1.1 or 6.0.1?
Sent from this galaxy
pr1jker said:
So, you're running 5.1.1 or 6.0.1?
Sent from this galaxy
Click to expand...
Click to collapse
Running Note 5 port Kyubi SDX R2 (5.1.1) for now
Hello, I am facing the same issue. Mine is note with att unlocked recently by att. Currently running 6.0.1 with Feb 2017 security patch. I have changed nothing in terms of software still facing this issue. Let me know if you have got any solution.
Thanks
P.D.
lash a Note 7 port, My phone went off in the process... ever since then.... Its impossible to make a reboot without pulling out the battery.....