What happends if i flash a stock firmware whitout CSC ??? If anyone did that pls tell because i dont want to reflash my note now ) thanks
amosolidu said:
What happends if i flash a stock firmware whitout CSC ??? If anyone did that pls tell because i dont want to reflash my note now ) thanks
Click to expand...
Click to collapse
If you flashed a rom with multi CSC and it's an official rom, the new CSC will be applied to your new rom after full factory reset and wipe cache partition and both the PDA and the CSC will be the same, and this is based on the rom it self
Related
So basically , since i upgraded my phone to the new leaked 4.4.2 rom for N9005 , knowing that my device is the international N9005 LTE Variant , every single kitkat rom is working unstably , i get crashes , whenever i take the S-PEN out devices freezes and crashes , anyone can help me here or tell me what i did wrong ?
Did you do a full wipe? changing from JB > KK have different file structures so not always compatible and may lead to issues. If you did wipe, try using the XEO build or a the newer NB* builds
radicalisto said:
Did you do a full wipe? changing from JB > KK have different file structures so not always compatible and may lead to issues. If you did wipe, try using the XEO build or a the newer NB* builds
Click to expand...
Click to collapse
i did a full wipe , more than once , dalvik wipe , cache wipe , tried different roms :/
i tried both NB3 and NA6 , both are not functioning properly , and now downloading the leaked 4.4.2 version and will try :/ .
will really appreciate it if anyone can help me , and i'll look into the XEO build , oh wait ,, XEO is UNB3 ?
tattari said:
i did a full wipe , more than once , dalvik wipe , cache wipe , tried different roms :/
i tried both NB3 and NA6 , both are not functioning properly , and now downloading the leaked 4.4.2 version and will try :/ .
will really appreciate it if anyone can help me , and i'll look into the XEO build , oh wait ,, XEO is UNB3 ?
Click to expand...
Click to collapse
XEO is NA and NB - there are two flavours
radicalisto said:
XEO is NA and NB - there are two flavours
Click to expand...
Click to collapse
well , apparently neither are working then ,
Is it because my phone is MEA region ? , i hopefully doubt that , but then again the leaked version is still downloading , and i really hope it works . i'll post here again if it did , or didn't
ok , tried the test build , still no luck :/ , and i lost all the files on the main SD card , good thing most of the legit stuff were in the micro sd
hi
yestarday i boutgh from some guy my new Galaxy Grand 2 sm-g7105 , i get it after full wipe/fectory (i khow it coz when i open it i need to choose all stating).
i download the es file menager and i saw the task called "mobile tracker" .
does some one tracking my phone?
it's possible to track a phone after full factory wipe?
if i will go to the recovery mode and wipe the cache and then factory wipe(full), it will wipe all my system or just the info inside it?
sorry for my english :d
btw this is my model: Saudi Arabia (KSA) SM-G7105 GALAXY Grand 2 LTE 4.3 G7105XWUANG1
is ther free origenal rom for this phone that i can flash?
i have found this site samsung-updates.com/device/?id=SM-G7105
this is the original rom ? i can flash it to replace the one i have ?
fangos said:
hi
yestarday i boutgh from some guy my new Galaxy Grand 2 sm-g7105 , i get it after full wipe/fectory (i khow it coz when i open it i need to choose all stating).
i download the es file menager and i saw the task called "mobile tracker" .
does some one tracking my phone?
it's possible to track a phone after full factory wipe?
if i will go to the recovery mode and wipe the cache and then factory wipe(full), it will wipe all my system or just the info inside it?
sorry for my english :d
btw this is my model: Saudi Arabia (KSA) SM-G7105 GALAXY Grand 2 LTE 4.3 G7105XWUANG1
is ther free origenal rom for this phone that i can flash?
i have found this site samsung-updates.com/device/?id=SM-G7105
this is the original rom ? i can flash it to replace the one i have ?
Click to expand...
Click to collapse
disable going in setting. and do flash ur phone . install stock firmware by going in sammobile.com
abilash10 said:
disable going in setting. and do flash ur phone . install stock firmware by going in sammobile.com
Click to expand...
Click to collapse
what u meen disable ?
and by flash u meen to wipe the hole phone from the recovery and then to flash the new firmware?
like flash roms yeah ? from odin?
fangos said:
what u meen disable ?
and by flash u meen to wipe the hole phone from the recovery and then to flash the new firmware?
like flash roms yeah ? from odin?
Click to expand...
Click to collapse
disable mean do off .. there may be tracking is on in ur device.. do factory reset and again install stock firmware from odin
Hi guys i am starting this thread asking for a bit of help with csc on my n910f.
I have seen a lot of single csc custom roms that i wouldnt mind trying out but i need to have a BTU csc . I asked this question on a custom rom page and he mentioned there are ways to flash a rom without changing current csc but cant find any info on that. I also wondered if its possible that if the rom has a single csc file wpuld i be able to change that file to BTU csc. If any of this is possible can someone be kind enough to help me out please. Thanks in advance.
Maybe this thread can help you.
thanks for reply I have got the btu csc he has done on the post. I cant seem to flash over a single csc custom rom. is there anyway I can put my csc into the rom .zip file and install the rom and my own csc with it?
Can you explain which steps are you following to flash roms?
Clean flash. Start with official fw. Flash twrp recovery and then flash rom. Some of the roms iv been trying to use are single csc roms not multi. Tried phone info app. Obviously cant change csc if its a single csc rom. Tried flash btu csc.tar via odin and reset rom but doesnt change if im using single csc rom. Wondering if i can change the actual csc files in a custom rom to flash my csc with any rom i need to try.
Hi all
Hope you're all fine
I need stock A710FD firmware which is a710fxxu1aolg
becase I format the software in recovery by wrong
And when I flashed a710fxxu1aolf I got some call problems
I think the different just in modem
Its here but I cant download it
http://aria-file.com/?cd=SAMSUNG/A-SERIES/A710FD/5.1.1
The orginal softawre was a710fxxu1aolg
iNTER5LOve said:
Hi all
Hope you're all fine
I need stock A710FD firmware which is a710fxxu1aolg
becase I format the software in recovery by wrong
And when I flashed a710fxxu1aolf I got some call problems
I think the different just in modem
Its here but I cant download it
http://aria-file.com/?cd=SAMSUNG/A-SERIES/A710FD/5.1.1
The orginal softawre was a710fxxu1aolg
Click to expand...
Click to collapse
What does it take to convince people to make a backup BEFORE flashing/wiping anything?
Why have custom recovery and not use the most important feature?
Sombody here can make a backup of the modem with twrp and then you can flash that.
please any one help
no one can help ?
Why not just update to A710FXXU1APBA?
iNTER5LOve said:
please any one help
Click to expand...
Click to collapse
I have sm-a710fd device. How I can help you?
can you please provide link for sm-a710fd stock rom
a710fd stock firmware
https://mega.nz/#!SRUVjaLb!CqNrsRj9BjGyFV7CEjw82Svk7AfYbBW06Thzx3LKMMw
br
walid badr said:
a710fd stock firmware
https://mega.nz/#!SRUVjaLb!CqNrsRj9BjGyFV7CEjw82Svk7AfYbBW06Thzx3LKMMw
br
Click to expand...
Click to collapse
thankc brother
this is good
can anybody here build custom rom for A710FD or port any to it?
Hello , sorry if i posted in wrong section or my spelling is not correctly ..
I have this problem with my fingerprint sensor i got this error when i try to register fingerprint
I tried hard reset , clear data with Titanium ...
If someone know how to fix this please let here the solution . Thx
What ROM?
I'm guessing an S7/N5 port?
Stock rom
That's an old version of Lollipop, upgrade, There are newer versions of LP, and Marshmallow is out
Thx sir i will try this
cannot update ..ext4 error in odin :|
Anyone can tell me which version of mm i can flash ?
silvercrest said:
Anyone can tell me which version of mm i can flash ?
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/database/SM-G900F/ choose your country and download the firmware.
Excuse me if I insist too much but my phone is bought in Germany but I'm in Romania and do not know which version of Android 6.0 to install not to receive error Ext4 in Odin ...
Try wiping cache or factory reset. Upgrade to Marshmallow also. Use SamFirm Tool to download Stock Roms.
I checked..for my region DBT latest firmware is 5.0 ...my question is : can i install the 6.0 from other region ? i've tried some couples of times but still got the ext 4 error ( some pit fle needed ) ..
My region code is DBT (Germany) and latest android version is 5.0 ..My question is : Can I flash a firmware (6.0.1) for another region without Ext4 error in Odin ? If yes , which rom ? Thx
silvercrest said:
Excuse me if I insist too much but my phone is bought in Germany but I'm in Romania and do not know which version of Android 6.0 to install not to receive error Ext4 in Odin ...
Click to expand...
Click to collapse
I'm from Romania and i flash: http://www.sammobile.com/firmwares/download/72656/G900FXXU1CPE9_G900FOXX1CPE2_ORX/
updated to 6.0.1 , fingerprint still not working ...
Sent from my SM-G900F using XDA-Developers mobile app