Just installed trickster mod and was wondering if yall were using trickster and what settings did you change? (Stock kernel/stock rom)
don't believe I have heard of it before
Sent from my VS980 4G using XDA Premium 4 mobile app
ANTLAY said:
Just installed trickster mod and was wondering if yall were using trickster and what settings did you change? (Stock kernel/stock rom)
Click to expand...
Click to collapse
I'm on stock rooted with Trickster and am trying this set up:
General Tab
-Read Ahead Buffer Size - 2048
-Scheduler - row
-Governor - ondemand
Specific Tab
-Multicore Power Saving - 1
And In the settings under the Set On Boot, I have Kernel Settings checked.
So far so good. I'll let you know if there's any hiccups.
edit: changed the scheduler and governor. Read This and changed my mind.
Related
Hello,
i have flashed the Matr1x Kernel and have no Voltage Settings at SetCPU . What i'm doing wrong?
Schnuerschuh007 said:
Hello,
i have flashed the Matr1x Kernel and have no Voltage Settings at SetCPU . What i'm doing wrong?
Click to expand...
Click to collapse
Get system tuner from the playstore. You can change voltage settings there
eep2378 said:
Get system tuner from the playstore. You can change voltage settings there
Click to expand...
Click to collapse
Thank you, it works with the app.
Hey guys
I got my device a week ago and did the following...
Unlocked
Rooted
Cyanogenmod 10.1 - 20121227-NIGHTLY
Trinity Seven Kernel (TS1700-GPUOC-4.2-ALPHA0)
Boot Animation changed
Font changed
Siaxis enabled
Emulators
Overclocked
ZRAM
memory tweaked
APEX Launcher
AD Blocker
Blackmarket app
flash player app
Titanium Backup
modded Google play store...
so what else can i do?
bored....
Thanks
Jomari29 said:
Hey guys
I got my device a week ago and did the following...
Unlocked
Rooted
Cyanogenmod 10.1 - 20121227-NIGHTLY
Trinity Seven Kernel (TS1700-GPUOC-4.2-ALPHA0)
Boot Animation changed
Font changed
Siaxis enabled
Emulators
Overclocked
ZRAM
memory tweaked
APEX Launcher
AD Blocker
Blackmarket app
flash player app
Titanium Backup
modded Google play store...
so what else can i do?
bored....
Thanks
Click to expand...
Click to collapse
well you're already setup to enjoy your device congratulations
Ubuntu using multirom........
Sent from my Nexus 7 using xda app-developers app
Well, you could, you know, use it as a tablet...
Hi,
I have Nexus 4 with stock ROM. I am completely satisfied with that ROM in matter of stability, speed, battery life etc.
Only thing I am missing is to control apps permissions - I was able to control at least something on 4.3 with App Ops, but in 4.4 it is gone (or I cannot find it )
So I am looking for a solution - I do not want to flash custom ROM, but I understand root may be required. Is there some solution I can use in combination rooted Nex 4 with stock ROM?
Thanks guys
helpfinder said:
Hi,
I have Nexus 4 with stock ROM. I am completely satisfied with that ROM in matter of stability, speed, battery life etc.
Only thing I am missing is to control apps permissions - I was able to control at least something on 4.3 with App Ops, but in 4.4 it is gone (or I cannot find it )
So I am looking for a solution - I do not want to flash custom ROM, but I understand root may be required. Is there some solution I can use in combination rooted Nex 4 with stock ROM?
Thanks guys
Click to expand...
Click to collapse
with root, you can use the app trickster mod (grab it from google play) to access app ops! ... also other apps, like
https://play.google.com/store/apps/details?id=com.appaholics.applauncher can modifie the application's permissions
nero17 said:
with root, you can use the app trickster mod (grab it from google play) to access app ops! ... also other apps, like
https://play.google.com/store/apps/details?id=com.appaholics.applauncher can modifie the application's permissions
Click to expand...
Click to collapse
Hi, thanks for reply and suggestion,
Permission Manager is only for 4.3 android (not my case)
for trickster mod I see only Kernel app which can modify many settings but cannot see app permissions control
helpfinder said:
Hi, thanks for reply and suggestion,
Permission Manager is only for 4.3 android (not my case)
for trickster mod I see only Kernel app which can modify many settings but cannot see app permissions control
Click to expand...
Click to collapse
here you go for 4.4:
https://play.google.com/store/apps/details?id=com.colortiger.appopsinstaller
badboy47 said:
here you go for 4.4:
https://play.google.com/store/apps/details?id=com.colortiger.appopsinstaller
Click to expand...
Click to collapse
Thanks,
I have pick this one:
https://play.google.com/store/apps/details?id=com.schurich.android.tools.appopsstarter
and seems to be suitable (the same as App Ops on 4.3)
Hi guys
is there any one who knows how to change note 4 cpu frequencies and keep them constant ?!
i just rooted my phone and disabeled dvfs but still when i change min / max frequencies in 3C cpu control app they will reset after a while
i just tested many apps but still frequencies never stick
any help ?!
Snapdragon or exynos?
@turbomann
Exynos
please help!
You'll need a custom kernel
Sent from my SM-N910G using XDA Premium 4 mobile app
that will NOT solve the problem
i just tested adam kernel and ultimate kernel
mrgspeed said:
that will NOT solve the problem
i just tested adam kernel and ultimate kernel
Click to expand...
Click to collapse
use Ultimate Kernel v11.4
@MEGAX91
i have ultimate 16 version ....
where is ultimate 11.4 download link?!
mrgspeed said:
@MEGAX91
i have ultimate 16 version ....
where is ultimate 11.4 download link?!
Click to expand...
Click to collapse
Here it is :
v11.4 (it's only working on K.K )
tnx for reply but i have lollipop
@MEGAX91
can you make synapse to apply settings in certain times again?!
for exapmle after scren on and off dvfs will change frequencies but if synaps apply frequesies again they will be the same like before......
i mean synapse automaticaly apply user frequencies after dvfs changed them
this would solve dvfs problems !
sorry for my bad english
mrgspeed said:
@MEGAX91
can you make synapse to apply settings in certain times again?!
for exapmle after scren on and off dvfs will change frequencies but if synaps apply frequesies again they will be the same like before......
i mean synapse automaticaly apply use set freqs after when dvfs changeed them
this would solve dvfs problems !
Click to expand...
Click to collapse
No , there is no way to disable or modify dvfs on lollipop for now.
@MEGAX91
no i mean just make synapse to apply settings automaticaly time by time ....
so dvfs will change frequencies but after a while synapse will reapply user made settings
so frequencies will remain what user set them most of time
mrgspeed said:
@MEGAX91
no i mean just make synapse to apply settings automaticaly time by time ....
so dvfs will change frequencies but after a while synapse will reapply user made settings
so frequencies will remain what user set them most of time
Click to expand...
Click to collapse
like is said , no.
synapse has no control over dvfs.
ok tnx
no one knows how to solve this issue ?!
Hi, before start, i'm not a dev and i inform you that i'm not responsable for any issue caused by script and indications in the post.
i make this script for enable performance mode like in CM rom in all aosp or caf based rom.
What is performance mode?
Performance mode change the usage of big and little core on the device. In balanced mode for the most of process the device uses the little core and only when a big load is detected the big core start to scaling. In performance mode the device use more the big core also for medium loads and less the little core. This is made possible by enabling the sched_boost in the Heterogeneous Multi- Processing scheduling settings (HMP).
Script link: http://pastebin.com/8FrVkVW4
After run script make sure that in interactive governor settings use_sched_load and use_migration_notif are set to 0 for both cpus
For restore the balanced mode reboot the device or run this script: http://pastebin.com/QG5bkH5U
Current version: v1.3
Status: Stable
Optional interactive settings:
http://pastebin.com/5u6t9Y2X
I also raccomand to use an hotplug. Personally i use Msm_hotplug
TEST REPORT
Info:
Script version: v1.3
Device: Redmi note 3 pro 3/32
Rom: Aoscp 3.1.3
Kernel: Agni pure 3.8
Additional kernel settings (not applied by the stripts):
Min freq big core: 883 MHz
Min freq little core: 691 MHz
Msm hotplug: enabled (1big core and 2 littles cores always on)
Scheduler: zen readahead 2048 kb
Partitions filesystems:
Filesystem /data /cache: f2fs
Filesystem /system: ext4
V 1.3 Test screenshots:
Look interesting. Can I flash this on aoscp?
thepomp said:
Look interesting. Can I flash this on aoscp?
Click to expand...
Click to collapse
Sure, but not flash only copy file in a txt file afer run with a script app. like this https://play.google.com/store/apps/details?id=com.ryosoftware.initd&hl=en
ps i forgot to tell that you need to set use sched load in cpu governor to 0. And wait for v1.2 it came i 5 min
Is ot ok to have this one miui MM?
Sent from my Redmi Note 3 using Tapatalk
febry_valdy said:
Is ot ok to have this one miui MM?
Click to expand...
Click to collapse
Last time that i use miui was on LP, and you can enable performance mode in battery settings, i dont know if in MM this feature is present, probably yes. The only difference is that the script also change cpubw governor probably performance mode in miui not do it. But you can run the script and try, probably all directory are correct. Please if you try let me know
lafonte said:
Last time that i use miui was on LP, and you can enable performance mode in battery settings, i dont know if in MM this feature is present, probably yes. The only difference is that the script also change cpubw governor probably performance mode in miui not do it. But you can run the script and try, probably all directory are correct. Please if you try let me know
Click to expand...
Click to collapse
Ok, will u tell me what is the best app to run that script?
Sent from my Redmi Note 3 using Tapatalk
febry_valdy said:
Ok, will u tell me what is the best app to run that script?
Click to expand...
Click to collapse
Try this https://play.google.com/store/apps/...app&pcampaignid=APPU_1_AB9QWI2pKIPowALZmrOYAw
Put the script in a folder after select the folder with the script give at app root permission and run. After you can enable the autorun after boot for apply the settings all time that you turn on the device
lafonte said:
Try this https://play.google.com/store/apps/...app&pcampaignid=APPU_1_AB9QWI2pKIPowALZmrOYAw
Put the script in a folder after select the folder with the script give at app root permission and run. After you can enable the autorun after boot for apply the settings all time that you turn on the device
Click to expand...
Click to collapse
I still have no idea how to use it.
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 05:49 PM ---------- Previous post was at 05:14 PM ----------
After applying those two script (performance mode and optional interactive) I think I have no big difference on performance itself (pic.1 performance enabled, pic.2 script hasn't ran yet) also I think an error occured when the script was executed (pic.3)
multiROM 6.12.8 MM.
Stock Kernel and Stock Interactive Governor.
Sent from my Redmi Note 3 using Tapatalk
febry_valdy said:
I still have no idea how to use it.
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 05:49 PM ---------- Previous post was at 05:14 PM ----------
After applying those two script (performance mode and optional interactive) I think I have no big difference on performance itself (pic.1 performance enabled, pic.2 script hasn't ran yet) also I think an error occured when the script was executed (pic.3)
multiROM 6.12.8 MM.
Stock Kernel and Stock Interactive Governor.




Click to expand...
Click to collapse
Error is related to different location of cpubw governor in miui, and missing interactive CPU governor, miui stock governor is ondemand and probably hasn't interactive. Ondemand governor use the schead load and the migration notify of hmp scheduler and you cant disable it. This is an important step for use correctly the cpu in performance mode, because hmp is setted for work with usual big.little architetture. So you need to use a custom kernel like agni, that is the first think to do if you ask for more performance.
lafonte said:
Error is related to different location of cpubw governor in miui, and missing interactive CPU governor, miui stock governor is ondemand and probably hasn't interactive. Ondemand governor use the schead load and the migration notify of hmp scheduler and you cant disable it. This is an important step for use correctly the cpu in performance mode, because hmp is setted for work with usual big.little architetture. So you need to use a custom kernel like agni, that is the first think to do if you ask for more performance.
Click to expand...
Click to collapse
Unfortunately agni and radon wont let my fingerprint work so simply I prefer to have fingerprint works than to have better performance. Moreover I rarely to play game on Android.
Sent from my Redmi Note 3 using Tapatalk