Hi all,
I'd like to put the EVR CSC on my BTU N9005 as it'll work better with my carrier, which is EE (the CSC here is EE). How can I go about doing this?
I tried flashing the EVR firmware in Odin but it gave me an Ext4 error.
Thanks!
AlecRobertson said:
Hi all,
I'd like to put the EVR CSC on my BTU N9005 as it'll work better with my carrier, which is EE (the CSC here is EE). How can I go about doing this?
I tried flashing the EVR firmware in Odin but it gave me an Ext4 error.
Thanks!
Click to expand...
Click to collapse
If the EVR is a lower bootloader than you are currently on it won't work. ie: if your BTU is MJ7 and your EVR is MJ6 you cannot do it. Not sure if you can extract the modem though... it may work. Not 100% on modems myself and you can brick if you mess up. So be careful.
EDIT: BTU should have the same settings for EE though in the .xml, has all UK carriers wrote into it. - Modem however will be slightly different I suspect
radicalisto said:
If the EVR is a lower bootloader than you are currently on it won't work. ie: if your BTU is MJ7 and your EVR is MJ6 you cannot do it. Not sure if you can extract the modem though... it may work. Not 100% on modems myself and you can brick if you mess up. So be careful.
EDIT: BTU should have the same settings for EE though in the .xml, has all UK carriers wrote into it. - Modem however will be slightly different I suspect
Click to expand...
Click to collapse
Hi,
I'm on MJ7 and EE's firmware is also MJ7 so I should be fine.
Thanks for responding so quickly .
Hi,
I've tried flashing the firmware multiple times and I keep getting an error in Odin: hidden.img fails to flash (ext4 error). Can somebody help?
Hmm, not sure why it's doing that, you could try extracting the modem from within the file and flashing just that. -- I'd assess 100% that you need to though, how bad is your signal? - any non official case blocking it? - tried another sim?
Related
hi,
I have a Samsung I9505 running
(*#1234*)
AP: i9505XXUAME2
CP: I9505XXUAME2
CSC: I9505OXXAMDB
and according to "CSC Changer" I get that the CSC is NEE.
From reading various threads NEE is "Finland" but I bough my phone in Sweden!? doesn't matter much I guess but still ...
As I've rooted this phone and for some reason it wont allow OTA update as it thinks it is "custom" even tho running "Triangle Away" that says flash counter is 0 and Official and download mode saying it's Official.
Well ether way
The question I have is, can I use pre-rooted firmware with the correct CFC file ? or should I run the official firmware for the NEE (Finland) region and re-root it with CF-Root ?
I have tried searching though the various threads but can't find a clear response to this.
Happy for reponds.
paddy01 said:
hi,
I have a Samsung I9505 running
(*#1234*)
AP: i9505XXUAME2
CP: I9505XXUAME2
CSC: I9505OXXAMDB
and according to "CSC Changer" I get that the CSC is NEE.
From reading various threads NEE is "Finland" but I bough my phone in Sweden!? doesn't matter much I guess but still ...
As I've rooted this phone and for some reason it wont allow OTA update as it thinks it is "custom" even tho running "Triangle Away" that says flash counter is 0 and Official and download mode saying it's Official.
Well ether way
The question I have is, can I use pre-rooted firmware with the correct CFC file ? or should I run the official firmware for the NEE (Finland) region and re-root it with CF-Root ?
I have tried searching though the various threads but can't find a clear response to this.
Happy for reponds.
Click to expand...
Click to collapse
Or should I run the official firmware for the NEE (Finland) region and re-root it with CF-Root ?
Above option by u is a good option my friend
Hm something wierd seem to have happen to my phone.. after updating to the latest NEE firmware I seem to have no CSC anylonger? Nether *#1234# nor CSC Changer says anything about CSC ?
paddy01 said:
Hm something wierd seem to have happen to my phone.. after updating to the latest NEE firmware I seem to have no CSC anylonger? Nether *#1234# nor CSC Changer says anything about CSC ?
Click to expand...
Click to collapse
NEE is product code for Nordic Countries.
did you make the wipe after flashing?
connect to Kies and tells what about firmware.
if nothing, reflash firmware
samersh72 said:
NEE is product code for Nordic Countries.
did you make the wipe after flashing?
connect to Kies and tells what about firmware.
if nothing, reflash firmware
Click to expand...
Click to collapse
Yes, that is what is was from the begining so I thought it would be best to continue on that path.
I have not wiped anything except dalvik, yet ?
I'll Kies when I get to a comp with that installed.
paddy01 said:
Hm something wierd seem to have happen to my phone.. after updating to the latest NEE firmware I seem to have no CSC anylonger? Nether *#1234# nor CSC Changer says anything about CSC ?
Click to expand...
Click to collapse
Factory reset and flash the full rom with odin and select csc instead of pda. This should fix you issue
http://forum.xda-developers.com/showpost.php?p=35139902&postcount=6574
http://forum.xda-developers.com/showpost.php?p=35146681&postcount=6590
MichelN said:
Factory reset and flash the full rom with odin and select csc instead of pda. This should fix you issue
Click to expand...
Click to collapse
Hoped to bypass factory reset .. such a hassle to reinstall/restore everything.
Can't I just reflash CSC and nothing else ?
paddy01 said:
Hoped to bypass factory reset .. such a hassle to reinstall/restore everything.
Can't I just reflash CSC and nothing else ?
Click to expand...
Click to collapse
It will work but i always recommand to do a reset to make things sure.
MichelN said:
It will work but i always recommand to do a reset to make things sure.
Click to expand...
Click to collapse
Well were using Mobile Odin to flash the firmware so gonna try do a normal odin flash on the CSC alone and see if that fixes the issue.
Nothing seem to be malfunctioning but still annoying ..
Will see what happens after flashing CSC with Odin.
Just a question - is it possible to flash only the CSC with Heimdal ? not familiar with Heimdal but I do prefer running stuff from linux..
found no reason to do a new post so this is my result.
After flashing the same FW as CSC I got back my CSC code but it appears to have flashed everything, system-recovery-hidden and so forth.
Got a new issue though... mobile odin no longer recongizes my device.. oh well.. close enough
So after re-rooting, re-flashing recovery and triangle away binary count I seem to be back in working order with the following as *#1234#
AP: I9505XXUBMF5
CP: I9505XXUBMF
CSC: I9505OXXBMF2
and CSC Changer says my current CSC is: NEE
Hey
Has anyone flashed a BTU firmware onto a different region phone??
I currently have a TGY model sm-n9005 want one to flash the BTU firmware below
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
over my
SM-N9005 Galaxy Note 3
PDA: N9005ZHUBMI7
CSC: N9005ZZHBMI7
MODEM: N9005XXUBMI5
I keep getting invalid ext4 img
Please if anyone knows how to get around this will really really appreciate it. (i am willing to donate to the person who solves this )
jeezy85 said:
Hey
Has anyone flashed a BTU firmware onto a different region phone??
I currently have a TGY model sm-n9005 want one to flash the BTU firmware below
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
over my
SM-N9005 Galaxy Note 3
PDA: N9005ZHUBMI7
CSC: N9005ZZHBMI7
MODEM: N9005XXUBMI5
I keep getting invalid ext4 img
Please if anyone knows how to get around this will really really appreciate it. (i am willing to donate to the person who solves this )
Click to expand...
Click to collapse
Im the other way around I want to Flash TGY into my BTU device as I need the chinese input
weasley said:
Im the other way around I want to Flash TGY into my BTU device as I need the chinese input
Click to expand...
Click to collapse
To flash cross regional fimrware you need to change you CSC code.
http://forum.xda-developers.com/showthread.php?t=2491877
Also if you flash MJ3 build then your bootloader will be upgraded and you have to stay will MJ3 firmware, you cant then downgrade back to MJ1 firmware
toker_X1 said:
To flash cross regional fimrware you need to change you CSC code.
http://forum.xda-developers.com/showthread.php?t=2491877
Also if you flash MJ3 build then your bootloader will be upgraded and you have to stay will MJ3 firmware, you cant then downgrade back to MJ1 firmware
Click to expand...
Click to collapse
BUMP
any luck anyone? still getin ext4 error
I want to know this as well. I have Malaysian fw on my phone but I want to switch to BTU. According to what I have read this should work because my current region is XX, however I have seen way too many people getting this ext4 error for me to try it.
Can someone give a definitive answer? I am on MJ3 with a region of XX. Thanks!
Sent from my SM-N9005 using XDA Premium 4 mobile app
patrick92260 said:
I want to know this as well. I have Malaysian fw on my phone but I want to switch to BTU. According to what I have read this should work because my current region is XX, however I have seen way too many people getting this ext4 error for me to try it.
Can someone give a definitive answer? I am on MJ3 with a region of XX. Thanks!
Click to expand...
Click to collapse
I'd like to know as well - my original firmware particulars read N900W8VLUBMJ1_N900W8OYABMJ1_N900W8VLUBMJ1_HOME.tar
perosredo said:
I'd like to know as well - my original firmware particulars read N900W8VLUBMJ1_N900W8OYABMJ1_N900W8VLUBMJ1_HOME.tar
Click to expand...
Click to collapse
Flashed MJ6 onto my malaysian Note 3 successfully, though once there haven't been able to change my CSC since... Also MJ6 has the new bootloaders and I now have warranty void 0x1...
My CSC code was XME, now BTU....
ultramag69 said:
Flashed MJ6 onto my malaysian Note 3 successfully, though once there haven't been able to change my CSC since... Also MJ6 has the new bootloaders and I now have warranty void 0x1...
My CSC code was XME, now BTU....
Click to expand...
Click to collapse
How did you flash it to void warranty?
sorry to hijack
but what does BTU stand for?
and what's the two letters before MJ7?
like UBMJ7, what's UB?
wilflare said:
sorry to hijack
but what does BTU stand for?
and what's the two letters before MJ7?
like UBMJ7, what's UB?[/QUOTE
CSC code for UK (no carrier) = BTU.
Revision of Android - MJ7, latest version released as of yet...
Not sure about the rest but it appears regional...
Flashed it after running through RDLV but had issues with WIFI and sd card... Flashed extracted modem from MJ6 rom, this sent me into a bootloop. Flashed stock MJ6 rom onto phone and fixed the bootloop but put new bootloaders on. At this point warranty void was 0x0. Tried Kingoapp to root hoping it wouldn't trip counter, it did...
New bootloaders are a mongrel....
Click to expand...
Click to collapse
Stay away from Kingo/vroot, xda has removed all links and closed the thread. It's full of malware / spyware and will send all personal details to a Chinese Web server.
Sent from my SM-N9005 using Tapatalk
ultramag69 said:
wilflare said:
sorry to hijack
but what does BTU stand for?
and what's the two letters before MJ7?
like UBMJ7, what's UB?[/QUOTE
CSC code for UK (no carrier) = BTU.
Revision of Android - MJ7, latest version released as of yet...
Not sure about the rest but it appears regional...
Flashed it after running through RDLV but had issues with WIFI and sd card... Flashed extracted modem from MJ6 rom, this sent me into a bootloop. Flashed stock MJ6 rom onto phone and fixed the bootloop but put new bootloaders on. At this point warranty void was 0x0. Tried Kingoapp to root hoping it wouldn't trip counter, it did...
New bootloaders are a mongrel....
Click to expand...
Click to collapse
this was my original PTN Firmware
ap= n9005xxubmj3
cp=n9005xxubmj2
csc=n9005phnbmj3
if just flashed it, with odin to the udmj7 firmware
ap= n9005xxudmj7
cp=n9005xxubmj2
csc=n9005oxadmj4
so far so good !! , still no random reboots ( i had before with the ubmj3 firmware )
Click to expand...
Click to collapse
just changed my firmware from xme to btu
just follow these from the s4 forum by kaushalls but use odin 3.04 and be patient it may fail for two time but will eventually will do it and run odin in normal mode not administrator mode
Make sure you take a backup via Kies if you need personal files
Download the respective stock ROMS from sammobile.com or samsung-updates.com or see thread on Stock Roms on XDA
Extract zip to get tar.md5
Put device into download mode (Vol down+ Home + Power) and Flash using Odin (PDA option)
Wait till device reboots back into Android after completing the flash and recovery
Once device reboots, do a Factory Reset via back up and reset option
Once device reboots after Factory Reset/recovery, enter the google account info and restore settings and then turn off the device
and restart (go into recovery and see the csc btu being applied if yes then stop here,do factory reset and restart)
after this the next steps are optional
Boot device back into download mode (Vol down+ Home + Power)
Re-flash the same downloaded firmware for a second time via Odin
Once the device reboots after the 2nd flash, your CSC should have changed to the CSC of the ROM you downloaded, and Kies also should show that CSC has changed and it should allow future updates via Kies or OTA
check csc by going to stock recoverry it will show manual mode at the bottom and then show btu csc applied
i am now on xxumdj6
Dear Friends,
I'm using N9005 on this N9005XXUBMJ1 firmware and trying to flash to the newer firmware from other region N9005ZHUDMJ8.
However, I've been getting an error "ext4 img" in ODIN and now my phone cannot boot and stuck on the download mode. So I decided to flash it back to its previous version N9005XXUBMJ1 but still not success and stuck on the same loop.
I have tried doing the emergency recovery from KIES, but having another error "[about] Fused 2 > Binary 1" (on the following screenshot)
Can anybody help me on this problem? I really like the phone and I really need it back.
Thank you
I just solved the problem by myself, it seems that there is a problem with the bootloader on the MJ8 version or something, so I use the MJ6 BTU firmware instead and it works. phewww
Having the same problem...which firmware is MJ6 BTU?
TIA
SoKoOLz said:
I just solved the problem by myself, it seems that there is a problem with the bootloader on the MJ8 version or something, so I use the MJ6 BTU firmware instead and it works. phewww
Click to expand...
Click to collapse
I think MJ8 is from Hongkong 16GB Model.
Either way the knox warranty void has been triggered. You also have the new bootloader meaning recovery through Kies won't work until your country gets the new bootloader stock.. You are essentially stuck using another countries rom now until your coutry/carrier upgrades their firmware with the new bootloader...
Forget Kies recovery working if things go wrong...
doclucas said:
Having the same problem...which firmware is MJ6 BTU?
TIA
Click to expand...
Click to collapse
To answer my own question, this is the BTU (United Kingdom) firmware file that saved my otherwise bricked phone which got the MJ8 HK bootloader:
N9005XXUDMJ6_N9005OXADMJ4_BTU.zip
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
doclucas said:
To answer my own question, this is the BTU (United Kingdom) firmware file that saved my otherwise bricked phone which got the MJ8 HK bootloader:
N9005XXUDMJ6_N9005OXADMJ4_BTU.zip
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Click to expand...
Click to collapse
I currently have a hong kong model 16gb (MJ8) version.
is it possible to flash BTU onto this device?
jeezy85 said:
I currently have a hong kong model 16gb (MJ8) version.
is it possible to flash BTU onto this device?
Click to expand...
Click to collapse
It should be possible, but might fail, so in any case make sure you download both the latest Hong Kong firmware (MK1) and the MJ7 BTU firmware just in case it fails you can flash MK1 on top and your device supposed to work fine.
Hi all, I've had a look and can't seem to find anything on the forums, but if you can point me in the right direction that would be much appreciated!
I've been flashing for years but never really been in this situation, as this is the first phone I've not rooted.
So here it is:
I've a completely stock, never-rooted S7 Edge on the XEU CSC.
I'm not getting the latest update and I'd like to have it, I'm stuck on Beta 5 (I was a part of the Beta Program).
I'd like to flash the latest availiable 7.0 firmware in ODIN.
My question is:
Would I still get OTA updates AFTER I've flashed the firmware in ODIN considering my phone is COMPLETELY STOCK and has NEVER been rooted?
Thank you very much!
P.S Sorry again if I've missed something in the forums, I tried searching and couldn't find an answer.
Thank you!
Stock roms get OTA updates. Only rooting breaks that.
Yes you would continue to get OTA when flashing update via Odin.
thedarkmunk said:
Hi all, I've had a look and can't seem to find anything on the forums, but if you can point me in the right direction that would be much appreciated!
I've been flashing for years but never really been in this situation, as this is the first phone I've not rooted.
So here it is:
I've a completely stock, never-rooted S7 Edge on the XEU CSC.
I'm not getting the latest update and I'd like to have it, I'm stuck on Beta 5 (I was a part of the Beta Program).
I'd like to flash the latest availiable 7.0 firmware in ODIN.
My question is:
Would I still get OTA updates AFTER I've flashed the firmware in ODIN considering my phone is COMPLETELY STOCK and has NEVER been rooted?
Thank you very much!
P.S Sorry again if I've missed something in the forums, I tried searching and couldn't find an answer.
Thank you!
Click to expand...
Click to collapse
You will get OTA updates on the XEU timeline. Your CSC is XEU and it will stay XEU if you flash Official Nougat. Hence, if BTU then get updated in the future, you will have to wait until it is released for XEU
Galactus said:
You will get OTA updates on the XEU timeline. Your CSC is XEU and it will stay XEU if you flash Official Nougat. Hence, if BTU then get updated in the future, you will have to wait until it is released for XEU
Click to expand...
Click to collapse
So as long as I update to an XEU firmware I'd still get the updates? But not if I update to a BTU one?
Just clarifying.
Also, thank you for the speedy reply!
Hello,
I have a brand new S7 Edge, non-rooted. I would like to have the official Nougat, but the update by OTA ist still not available for my device. I would try it with Odin, but where can I get the official firmware (german, non-branding device (DBT?))?
Thanks for your help
ENFI said:
Hello,
I have a brand new S7 Edge, non-rooted. I would like to have the official Nougat, but the update by OTA ist still not available for my device. I would try it with Odin, but where can I get the official firmware (german, non-branding device (DBT?))?
Thanks for your help
Click to expand...
Click to collapse
So you must wait until it´s released.......or you can flash via odin the BTU(OXA) Nougat or the (german)Vodafone VD2.(if you flash the BTU(OXA_MultiCSC), you will get the active DBT CSC)(but flash the normal CSC not Home_CSC)
thedarkmunk said:
So as long as I update to an XEU firmware I'd still get the updates? But not if I update to a BTU one?
Just clarifying.
Also, thank you for the speedy reply!
Click to expand...
Click to collapse
When you flash official Nougat, you are flashing OXA CSC. This CSC is a "multi" CSC which contains multiple CSC. This OXA CSC actually contains BTU, XEU, NEE, DBT and a few more.
If you flash a multi CSC and you are already on one of the contained CSC (So in your case, you are on XEU CSC and flashing a "multi" CSC that also contains XEU) then your CSC will not change, your phone will see that you are coming from XEU CSC and so it will pick that CSC when you flash the multi CSC.
You won't actually have BTU CSC, which means you will only receive updates when XEU CSC receives them. BTU normally receives updates before XEU so most people like to change to BTU. It isn't a must though.
So to clarify, if you flash official Nougat, you will get OTA updates when XEU CSC users receive it. If you want to CHANGE your CSC to BTU then that involves multiple flashes.
Galactus said:
When you flash official Nougat, you are flashing OXA CSC. This CSC is a "multi" CSC which contains multiple CSC. This OXA CSC actually contains BTU, XEU, NEE, DBT and a few more.
If you flash a multi CSC and you are already on one of the contained CSC (So in your case, you are on XEU CSC and flashing a "multi" CSC that also contains XEU) then your CSC will not change, your phone will see that you are coming from XEU CSC and so it will pick that CSC when you flash the multi CSC.
You won't actually have BTU CSC, which means you will only receive updates when XEU CSC receives them. BTU normally receives updates before XEU so most people like to change to BTU. It isn't a must though.
So to clarify, if you flash official Nougat, you will get OTA updates when XEU CSC users receive it. If you want to CHANGE your CSC to BTU then that involves multiple flashes.
Click to expand...
Click to collapse
Thank you very much!
I think I'll flash the latest one then.
Thank you again!
thedarkmunk said:
Hi all, I've had a look and can't seem to find anything on the forums, but if you can point me in the right direction that would be much appreciated!
I've been flashing for years but never really been in this situation, as this is the first phone I've not rooted.
So here it is:
I've a completely stock, never-rooted S7 Edge on the XEU CSC.
I'm not getting the latest update and I'd like to have it, I'm stuck on Beta 5 (I was a part of the Beta Program).
I'd like to flash the latest availiable 7.0 firmware in ODIN.
My question is:
Would I still get OTA updates AFTER I've flashed the firmware in ODIN considering my phone is COMPLETELY STOCK and has NEVER been rooted?
Thank you very much!
P.S Sorry again if I've missed something in the forums, I tried searching and couldn't find an answer.
Thank you!
Click to expand...
Click to collapse
Hey,
My phone was on the XEU csc code and not getting the nougat update either. I am not rooted either. I wanted to update to nougat. So I went to sammobile and downloaded the BTU firmware. I downloaded the newest lollipop version so as to make it update to nougat ota. When flashing I read some where that to keep ota functionality not to flash csc home in odin but just the normal csc file that is inter zip folder along with the other files. Once flashed and phone had been setup, I went to settings and about phone and checked for updates, my phone then proceeded to update to nougat sucesfully.
Sent from my SM-G935F using Tapatalk
dannybee1 said:
Hey,
My phone was on the XEU csc code and not getting the nougat update either. I am not rooted either. I wanted to update to nougat. So I went to sammobile and downloaded the BTU firmware. I downloaded the newest lollipop version so as to make it update to nougat ota. When flashing I read some where that to keep ota functionality not to flash csc home in odin but just the normal csc file that is inter zip folder along with the other files. Once flashed and phone had been setup, I went to settings and about phone and checked for updates, my phone then proceeded to update to nougat sucesfully.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Fantastic!
I'll do that then!
Thank you very much!
thedarkmunk said:
Fantastic!
I'll do that then!
Thank you very much!
Click to expand...
Click to collapse
Your welcome, just to let you know, I should of said this will completely wipe your device so do a backup of your photos and things on your phone memory and just take your sd card out to be safe.
Sent from my SM-G935F using Tapatalk
I've applied the late January 2017 BTU update via Odin and used the regular CSC file (not home CSC) which wiped everything out and all is working well - but I would have expected the latest BTU update to have been applied OTA and it hasn't shown as available. My CSC is still showing up as XEU on the phone too which I guess is the cause for this? Did I do something wrong when applying the BTU update?
Galactus said:
When you flash official Nougat, you are flashing OXA CSC. This CSC is a "multi" CSC which contains multiple CSC. This OXA CSC actually contains BTU, XEU, NEE, DBT and a few more.
If you flash a multi CSC and you are already on one of the contained CSC (So in your case, you are on XEU CSC and flashing a "multi" CSC that also contains XEU) then your CSC will not change, your phone will see that you are coming from XEU CSC and so it will pick that CSC when you flash the multi CSC.
You won't actually have BTU CSC, which means you will only receive updates when XEU CSC receives them. BTU normally receives updates before XEU so most people like to change to BTU. It isn't a must though.
So to clarify, if you flash official Nougat, you will get OTA updates when XEU CSC users receive it. If you want to CHANGE your CSC to BTU then that involves multiple flashes.
Click to expand...
Click to collapse
So I have the XEU and I'm prepared to flash twice in order to change the CSC. Which firmware should I first flash in order to keep the BTU CSC when I flash that secondly?
AminusVox said:
So I have the XEU and I'm prepared to flash twice in order to change the CSC. Which firmware should I first flash in order to keep the BTU CSC when I flash that secondly?
Click to expand...
Click to collapse
You flash anything that is not a part of the OXA CSC
After that, if you flash OXA you will be BTU
Hi all,
Bought an s8 here in the UK but the CSC is TIM (italy) want to insall XEU firmware tried Odin with reset that I would normally use to work but it's staying as TIM??
Any help?
Sent from my SM-G950F using Tapatalk
You must hard reset after the odin flash...
Done hard reset from software
Sent from my SM-G950F using Tapatalk
jus71n01 said:
Done hard reset from software
Click to expand...
Click to collapse
Find a firmware without a multi CSC I believe XSA and UK carrier firmwares all are like this.. Check the repartition box. Flash and don't use the Home CSC. Let the phone boot and then flash your multi CSC firmware. That is how I have gotten around it my S7 edge when I was trying to make Samsung Pay work.
Panzerapple said:
Find a firmware without a multi CSC I believe XSA and UK carrier firmwares all are like this.. Check the repartition box. Flash and don't use the Home CSC. Let the phone boot and then flash your multi CSC firmware. That is how I have gotten around it my S7 edge when I was trying to make Samsung Pay work.
Click to expand...
Click to collapse
Would this trip knox? I have S8+ SM-G955F with TIM CSC and wanting to use Samsung Pay in Australia.
tronghien said:
Would this trip knox? I have S8+ SM-G955F with TIM CSC and wanting to use Samsung Pay in Australia.[/QUOTE
Flashing stock Samsung firmware will not trip knox.
Click to expand...
Click to collapse
Panzerapple said:
Flashing stock Samsung firmware will not trip knox.
Click to expand...
Click to collapse
Hey thanks for the quick reply. So just confirming before I start, you reckon below are the steps I should take?
1) Flash with a non multi-csc firmware, such as the Australian XSA (check the repartition box, and don't use HOME_CSC)
2) Reboot, then flash again with a multi-csc firmware, such as the Netherland PHN firmware.
And, when flashing do I pick all 4 files in Odin (BL, CP, AP, CSC)?
Thanks for your help.
tronghien said:
Hey thanks for the quick reply. So just confirming before I start, you reckon below are the steps I should take?
1) Flash with a non multi-csc firmware, such as the Australian XSA (check the repartition box, and don't use HOME_CSC)
2) Reboot, then flash again with a multi-csc firmware, such as the Netherland PHN firmware.
And, when flashing do I pick all 4 files in Odin (BL, CP, AP, CSC)?
Thanks for your help.
Click to expand...
Click to collapse
If you want Samsung Pay works in the USA also then just flash XSA with all the files and don't use home csc and your done.
The only time I had issues is when you want to switch from a multi csc to another multi csc. Example German csc to UK csc because they use the same firmware. That is when I flashed a fixed csc then flashed a multi csc. So I could get the specific csc to work on my phone. Supposedly you can do it differently through the dialer I think. It never worked for me.
I have my s8 and my gf's s7 edge both on XSA because Samsung pay and white pages both work. Only downside is you get updates a month later then BTU.
I hope that makes sense if not pm me.
Thank you. It works as you said.