CWM installing help - Galaxy S 4 Q&A, Help & Troubleshooting

Hi,
I have pre rooted 4.2.2 JDQ39.I9500XWUBMG5. In the download mode Binary : Samsung Official , System : Official. If I flash the CMW recovery using SGS4 Flasher apk. Is it going to change the current binary status ?

Related

[q] need help with root ...

I hav tried rooting s4
:crying:
model : gt - i9500
android : 4.3
Baseband : i9500DDUEMJ9
Kernel : 3.4.5-1984169
[email protected] #1
fri oct 25 20:40:58 KST 2013
Build : JSS15J.I9500XXUEMJ9
SELinux Status : Enforcing
SEPF_GT-I9500_4.3_0011
the files i tried were cofface cwm and cf-auto root
when i use cf-auto root the phone gets rooted but has stock recovery and nothing can be installed or updated or even cache wiped .... when i press cache wipe it says wiping then shows exclamation mark image and reboots..
when i use cofface cwm and then install supersu it says i hav 4.3 and i should go to fourms and chk ....
please help as i want to root the device and install a custom recovery to be able to flash roms and mods.
i tried flashing a theme mod blue(touchwiz) with stock recovery and it didnt do anything just rebooted to normal touch wiz ....
Any help is appreciated .....

[Q] Help Binary count on I-9500

HI,
I flashed pre rooted firmware 4.2.2 using ODIN on my Samsung I-9500 4.2.2. Then the status is remain same
Binary : Samsung Official
System : Official.
Then I installed Wanam apk to modify the UI, It asked me to download Xposed framework I grant Super user permission. Once It completed I checked the status
Binary : Samsung Official
System : Custom.
I flashed stock firmware 4.2.2 and did the reset factory reset. Then it changed to
Binary : Samsung Official
System : Official.
My question, Is the hidden binary count or knox counter triggered or not ?
If I updated to stock 4.3 Is the Knox Warranty bit 0x0 or 0x1 ?
Please help me.

Newbie needs to upgrade rooted phone. Help!

My phone is displaying the following after I attempted to flash to the latest firmware via Kies.
ODIN MODE
PRODUCT NAME : SGH-I747M
CUSTOM BINARY DOWNLOAD : Yes (3 counts)
CURRENT BINARY : Custom
SYSTEM STATUS : Custom
QUALCOMM SECUREBOOT : ENABLE
My phone was rooted and I simply went into Super SU and chose the complete unroot option, then rebooted.
Unfortunately, the updating process got stuck. What would I do from there in order to be able to update the phone?
Strat-Mangler said:
My phone is displaying the following after I attempted to flash to the latest firmware via Kies.
ODIN MODE
PRODUCT NAME : SGH-I747M
CUSTOM BINARY DOWNLOAD : Yes (3 counts)
CURRENT BINARY : Custom
SYSTEM STATUS : Custom
QUALCOMM SECUREBOOT : ENABLE
My phone was rooted and I simply went into Super SU and chose the complete unroot option, then rebooted.
Unfortunately, the updating process got stuck. What would I do from there in order to be able to update the phone?
Click to expand...
Click to collapse
You have an i747m which is an s3. This is the s4 forum. But you should be able to go to sammobile.com and download the latest firmware and flash it in Odin.
Sent from my Nexus 9 using XDA Free mobile app

help please : sm-g900h stuck on ( get pit for mapping )

hello everyone..
i have a galaxy s5 g900h and i think i did a mistake when i flashed a philz touch recovery then my phone can enter just on download mode and when i want to flash the official rom odin stuck on -get pit for mapping-
current binary : samsung official
system status : custom
reactivation lock(kk) : off
knox void : 1
ap swrev : A1
pliiiiiiiiiiiiiiiiiiiiiiiiiiiiiz help me
If it is a 16GB model, flash this PIT file with the stock ROM
http://forum.xda-developers.com/attachment.php?attachmentid=2794808&d=1402604385
If it is the 32GB version, DO NOT
thanks for replieng....i tried it but got the same problem
is there any programme better than odin or something..
i think i just made progress.....i flashed the cf root file then i flashed the philz touch recovery and now i can enter the recovery mod but i think there is no rom on the device so i have to flash a custom rom right!!
pliz give me a good custom rom for g900h and what i have to do now..pliz i wont to lose recovery mod again
Salamjahshan said:
i think i just made progress.....i flashed the cf root file then i flashed the philz touch recovery and now i can enter the recovery mod but i think there is no rom on the device so i have to flash a custom rom right!!
pliz give me a good custom rom for g900h and what i have to do now..pliz i wont to lose recovery mod again
Click to expand...
Click to collapse
At least there are two good roms
for me : xtrestolite & space rocket
linkhttp://forum.xda-developers.com/showthread.php?t=2732110
& other linkhttp://forum.xda-developers.com/showthread.php?t=2732110

GALAXY Note 3 SM-N900.. Help..

I am a new member and I don't know where to post this on the forum and I am unable to send this via the contact link at XDA... I apologize. Kindly guide...
Hi..
Subject: Installing the custom recovery and latest cyanogenmod on my Samsung Galaxy Note 3 SM-N900.
A few details :
Samsung Galaxy Note 3 SM-N900 running on stock rom Android version 4.4.2 and the build Number is N900XXUDND1. It is an Indian version.
I rooted my phone via Odin cfautoroot successfully but was not unable to load custom recovery cwm since the phone would go blank and stuck in boot loop.
I had to reinstall the stock firmware 4.4.2 via odin but could not install custom recovery via Odin and again stuck in boot loop . I reinstalled firmware 4.4.2 and tried installing custom recovery via flashify me app but again the phone went blank although I could go to download mode but stuck in boot loop.
I again reinstalled firmware 4.4.2 via odin but later I could not even root my phone via Odin!!..so I rooted my phone via king root app successfully and then changed it to supersu me root successfully without a problem.
Now the problem is I want to load custom recovery in order to load Cyanogenmod.
I tried installing cwm recovery via the clockworkmod app but it does not recognize my device officially.
I tried installing custom recovery via twrp app but getting error there also.
Now this is the info I see when I am in download mode:
ODIN MODE.
PRODUCT NAME: SM-N900.
CURRENT BINARY: Samsung Official.
SYSTEM STATUS: Custom.
KNOX WARRANTY VOID: 1
RP SWREV: A4
Is the bootloader locked in my device? Is this the reason I am unable to load custom recovery? I don't even know how to check the present status lock/unlock status of bootloader
I want to load custom recovery(cwm or twrp) and load the latest cyanogenmod at the earliest and I would appreciate if I can get step by step details of doing so.
Is it possible to do this without using a computer?...
Thanking you...
You do not need to root the phone before installing a custom ROM. You can install a custom recovery using Odin.
Some good info here: http://forum.xda-developers.com/galaxy-note-3/general/guide-root-note-3-sm-n900-5-0-install-t3069670
audit13 said:
You do not need to root the phone before installing a custom ROM. You can install a custom recovery using Odin.
Some good info here: http://forum.xda-developers.com/galaxy-note-3/general/guide-root-note-3-sm-n900-5-0-install-t3069670
Click to expand...
Click to collapse
.... Hi.. Thank for replying so soon...
I checked the link you provided but it is all about rooting only.. As mentioned earlier, I rooted my phone and confirmed the same via root checker app. Now I just want to install cwm/twrp recovery and then go ahead and install cyanogenmod...
audit13 said:
You do not need to root the phone before installing a custom ROM. You can install a custom recovery using Odin.
Some good info here: http://forum.xda-developers.com/galaxy-note-3/general/guide-root-note-3-sm-n900-5-0-install-t3069670
Click to expand...
Click to collapse
.... Oops sorry... I know there are custom recovery links present too but can you provide the direct file link pertaining to Samsung Galaxy Note 3 SM-N900 running 4.4.2 exynos??

Categories

Resources