[Q] Flashing BootLoader SM 90005 - Galaxy Note 3 Q&A, Help & Troubleshooting

Hey im having trouble install TWRP/CWM
The situation i upgraded to 4.4 on my note 3
Then i tried to install one of the recovery with Flashify/Goomanger/Odin
But everytime i boot to recovery it just boots to android or it just gets stuck in a bootloop
Till i take the battery out and power it on
My guess is the I need to flash the boot loader
But i dont know how to nor to i have the files
Update: hey guys i have followed your steps and it work i got CWM on my device
But when i flash a rom it doesnt actually flash the rom and stay with stock

You need to re flash 4.4.2 kit kat with od in tick update bootloader
Then root with chain fires auto cf then flash custom recovery
Hit Thanks if helps
Sent from my SM-N9005 using XDA Premium HD app

GeneralAdidish said:
Hey im having trouble install TWRP/CWM
The situation i upgraded to 4.4 on my note 3
Then i tried to install one of the recovery with Flashify/Goomanger/Odin
But everytime i boot to recovery it just boots to android or it just gets stuck in a bootloop
Till i take the battery out and power it on
My guess is the I need to flash the boot loader
But i dont know how to nor to i have the files
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2614787

Related

[Q] Unable to install CWM or TWRP on Note 3 after 4.4.2 update

So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
There is a script in official firmware that checks for official recovery and if it finds a custom one it tries to overwrite with official one. If i remember correct it's called install-recovery. sh
PhilZ recovery handles it automatically.
It's impossibe to flash anything other than the leaked 4.4.2 stock because you flashed your bootloader to kitkat, no you MUST stay on sammy 4.4.2 till the devs found a solution for this. Thats why you have to read carefully be4 you flash.
silentvisitor said:
There is a script in official firmware that checks for official recovery and if it finds a custom one it tries to overwrite with official one. If i remember correct it's called install-recovery. sh
PhilZ recovery handles it automatically.
Click to expand...
Click to collapse
No luck!
I tried PhilZ recovery from the below link.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltexx
What are my other options?
sid8907 said:
No luck!
I tried PhilZ recovery from the below link.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltexx
What are my other options?
Click to expand...
Click to collapse
This one seems to be the only one working with 4.4.2 right now.
Possible solution
The way I can suggest is to create a little update.zip file with little updater-script to remove install-recovery.sh file from device (just one line needed).
Ok, I found a zip which I am attaching below. You(or anyone) may review the script before flashing.
Place this on your external (or internal) sdcard.
In ODIN don't check Auto reboot
Flash Recovery. Remove phone when it says PASS.
Remove battery. Start in Recovery mode by pressing buttons.
You should now be in new Recovery.
Flash that zip file.
Reboot.
You should be good.
The Auto Reboot for some reason is faded out. Tried different versions of Odin and also tried to open it with the phone connected/disconnected.
I am out of ideas.
I would suggest you to wait for someone to come up with working solution. Being too adventurous with ODIN could brick your device.
sid8907 said:
The Auto Reboot for some reason is faded out. Tried different versions of Odin and also tried to open it with the phone connected/disconnected.
Click to expand...
Click to collapse
Clear out all your ODIN caches etc, delete all files and keep 1.85.
Flash this (only working recovery on 4.4.2) via PDA in ODIN, If it doesn't reboot auto after saying PASS or RESET.. just turn phone off, reboot into recovery and it'll be fine.
EDIT: Just re-read, Re flash your Stock 4.4.2 (Use XEO not the leaked one!) and then start again
Thanks!
Maybe a little off topic, but is there a way to install CM11 on Stock 4.4.2 on the Note 3?
I've been reading Samsung is out with a new bootloader so there is no way round this?
radicalisto said:
Clear out all your ODIN caches etc, delete all files and keep 1.85.
Flash this (only working recovery on 4.4.2) via PDA in ODIN, If it doesn't reboot auto after saying PASS or RESET.. just turn phone off, reboot into recovery and it'll be fine.
EDIT: Just re-read, Re flash your Stock 4.4.2 (Use XEO not the leaked one!) and then start again
Click to expand...
Click to collapse
Thanks!!
sid8907 said:
Thanks!
Maybe a little off topic, but is there a way to install CM11 on Stock 4.4.2 on the Note 3?
I've been reading Samsung is out with a new bootloader so there is no way round this?
Click to expand...
Click to collapse
You may have to do a little reading but I believe CM11 is now working on the KK bootloader...
sid8907 said:
So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
Click to expand...
Click to collapse
here's the link for twrp for ya'll http://forum.xda-developers.com/showpost.php?p=50333147&postcount=398
sid8907 said:
So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
Click to expand...
Click to collapse
jp.26 said:
here's the link for twrp for ya'll http://forum.xda-developers.com/showpost.php?p=50333147&postcount=398
Click to expand...
Click to collapse
so.... yeah i just updated my bootloader to 4.4.2 and this drove me literally insane. ive been working on it for 4 hours now. i encountered so many problems with installing the bootloader. exact same problem as SID8907. i gotta tell you tho.... you worked some magic my friend. i tried almost everything. then i came across your link. i was like why not? so i flashed the img in odin..... anddddd :drumroll pleaseeeeee:: IT WORKED. ahhh....... so much frustration and the problem is solved!!! thank you so much JP.26 :good::laugh:
is there any word on how to fix this been looking for hours tmobile note beast dont want to put any roots down on my phone before i find a way to flash cm or a non bloated note rom would be nice.
I'll that I've managed is to root and flash twrp I found a way to turn cwm recovery into a tar file and flash through odin. But i just get into a boot loop with cwm due to the boot loader I presume but tarp works fine I just can't flash cm11. I get boot loop every time
Sent from my SM-N900T using XDA Premium 4 mobile app
im sorry but im confused here... does this all simply mean that there is not yet a working cwm for 4.4.2 yet? and that while we can root, there is no working recovery for this version?
I'm not sure myself tarp works but I can't flash cm11
Sent from my SM-N900T using Tapatalk
Phillz cwm Dev edition I think that's the name works its a themed touch cwm. This works great but still can't flash cm so gayyyy
Sent from my SM-N900T using Tapatalk
I was wondering what happened to the cmw too.
The modded cmw by Chenglu is the only one working that I know of.
Link to thread: http://forum.xda-developers.com/showthread.php?t=2454079

SOLVED recovery is not seandroid enforcing set warrenty bit : recovery --> loop

after I had succesfully rooted my phone, I wanted to install a custom rom.
I am sure I did something wrong ofcource otherwise I wouldn't be here.
#1 Battery in
#2 power on
#3 vibrate
#4 screen on RECOVERY BOOTING
Recovery is NOT SEANDROID ENFORCING
Set Warrenty Bit : recovery
Samsung
GALAXY Note3
SM-N9005
#5 screen off--> reboot -->goto #3
how to brake in the loop so I can use odin ( or whatever ) to install (at least) a normal boot again?
Which custom recovery did you flashed Twrp or Cwm?
Sent from my SM-N900W8 using xda app-developers ap
fwberg said:
after I had succesfully rooted my phone, I wanted to install a custom rom.
I am sure I did something wrong ofcource otherwise I wouldn't be here.
#1 Battery in
#2 power on
#3 vibrate
#4 screen on RECOVERY BOOTING
Recovery is NOT SEANDROID ENFORCING
Set Warrenty Bit : recovery
Samsung
GALAXY Note3
SM-N9005
#5 screen off--> reboot -->goto #3
how to brake in the loop so I can use odin ( or whatever ) to install (at least) a normal boot again?
Click to expand...
Click to collapse
You installed a 4.3 recovery on a 4.4 phone.
Most likely you downloaded the TWRP on the main page and did not download the latest 4.4 compatible one.
Please flash this in Download Mode: http://techerrata.com/bigbiff/hlte-recovery.img.tar
To get into Download Mode, remove the battery, wait a few minutes then put it back, Hold the Download Mode Combination then it would boot directly into Download Mode.
hey nicho, thank you very much
so that was the trick. REMOVE THE BATTERY --> PRESS THE DOWNLOAD KEYS AND HOLD THEM --> THEN ENTER THE BATTERY BACK.
it costed me the whole day yesterday searching for a solution.
at least now I can continue to install a new rom
Thanks man
TWRP
during twrp it told me, there was a newer one. 2.x.x.9
so stupid me, if I had sticked to the plan, nothing would happend.
I used twrp b4 some days ago, for my samsung note 10.1 (2014) without trubbles,
I guess, I overread something
but I'm happy it is all fixed now.
thx for show ur interest
greetz, fred
thank you
nicholaschum said:
You installed a 4.3 recovery on a 4.4 phone.
Most likely you downloaded the TWRP on the main page and did not download the latest 4.4 compatible one.
Please flash this in Download Mode: techerrata.com/bigbiff/hlte-recovery.img.tar
To get into Download Mode, remove the battery, wait a few minutes then put it back, Hold the Download Mode Combination then it would boot directly into Download Mode.
Click to expand...
Click to collapse
this solved my recovery problem, i clicked thank you!!!
nicholaschum said:
You installed a 4.3 recovery on a 4.4 phone.
Most likely you downloaded the TWRP on the main page and did not download the latest 4.4 compatible one.
Please flash this in Download Mode: http://techerrata.com/bigbiff/hlte-recovery.img.tar
To get into Download Mode, remove the battery, wait a few minutes then put it back, Hold the Download Mode Combination then it would boot directly into Download Mode.
Click to expand...
Click to collapse
You just saved my phone i readed so much almost one week 12hours without stop before i try custom recovery,rom and so on.
But well since i decided that im ready to, and first thing i tried to do was custom recovery wich leaded to this problam Now im afraid to enter revovery mode xD
Idiots
You're really the dumbest person I've ever seen in my life. See if this is solution to some kind of problem your beast
Worked for me
Thank you.
remove the battery then press download buttons keep them pressed and put the battery back. choose volume down to continue....
Solution To Loop SM-N900P
I am new to XDA and have only been with android for 6 months but i figure this will help new comers to this issue. Power+Volume Down+Home at the same time to enter download mode. Flash CWM via ODIN. This should work to fix the loop. I found out the hard way but it only took me an hour. I am not sure if this will work if you have not already rooted your phone but it should (since this is the major step in rooting). I believe i deleted my CWM file (accidentally) when i was trying to clear space for my recovery with ROM Manager. Be sure to download the Samsung drivers if you had not already done so during the rooting process.
Hope this helps.
Gives me same error message
But after that it boots into recovery.
Should I proceed installing custom rom or is there anything else to be taken care of
Thanks!
Thank you very much,you save me a lot of trouble.
hey_joe said:
Which custom recovery did you flashed Twrp or Cwm?
Sent from my SM-N900W8 using xda app-developers ap
Click to expand...
Click to collapse
hey joe im getting the same problem but im using the note 3 SM-N900W8 and I flash the CWM straight from the app and not using odin. My phone is already rooted using towelroot
billygun118 said:
hey joe im getting the same problem but im using the note 3 SM-N900W8 and I flash the CWM straight from the app and not using odin. My phone is already rooted using towelroot
Click to expand...
Click to collapse
Which android os do you have on your phone and which cwm version did you flashed?
hey_joe said:
Which android os do you have on your phone and which cwm version did you flashed?
Click to expand...
Click to collapse
im using version 4.4.2 jellybean. The rom manager is v5. 5.3.7/ current recovery 6.0.4.6
billygun118 said:
im using version 4.4.2 jellybean. The rom manager is v5. 5.3.7/ current recovery 6.0.4.6
Click to expand...
Click to collapse
Based on my experience, using rom manager to flash recovery always results in a problem. I suggest you use odin to flash this in download mode.
Btw, 4.4.2 is Kitkat
hey_joe said:
Based on my experience, using rom manager to flash recovery always results in a problem. I suggest you use odin to flash this in download mode.
Btw, 4.4.2 is Kitkat
Click to expand...
Click to collapse
should I root my phone first using cf-root. Then flash the cwm recovery. What happens if I get stuck in a bootloop after flashing the recovery
billygun118 said:
should I root my phone first using cf-root. Then flash the cwm recovery. What happens if I get stuck in a bootloop after flashing the recovery
Click to expand...
Click to collapse
The way I did this is, first install the cwm recovery then flash cf-root after. You can always use odin to flash back the original firmware.
hey_joe said:
The way I did this is, first install the cwm recovery then flash cf-root after. You can always use odin to flash back the original firmware.
Click to expand...
Click to collapse
so there is nothing else I have to do before flashing the recovery?
what boxes should be checkmarked in odin
billygun118 said:
so there is nothing else I have to do before flashing the recovery?
what boxes should be checkmarked in odin
Click to expand...
Click to collapse
Just make sure reactivation lock is off.
When you first start odin, F.Reset Time and Auto Reboot are ticked off so let them be and make sure only those are checked and nothing else.
You probably know this but just to make sure, load the recovery on the AP slot before hitting start.

[Q] SafeStrap Installs Recovery In 4.3 But wont boot into it

I am on MK2 4.3 and I have Safestrap installed and I installed the recovery and when I reboot into recovery It goes to the Custom screen then it fails to Go to the Splash screen where I can choose to go into TWRP . I had this working on MF3 but I had bricked my phone and and had to flash the allin one to fix it . I am successfully rooted with safestrap installed .. ANY IDEAS would be greatly appreciated...Thanks By the way it Says Safe system : Not Active. I thought I remember it saying Active before
Also is there another way to install a Recovery. Im coming from a Tmobile GS2 where you could flash recovery once within Odin and after that you could just flash different versions of Twrp or Cwm when needed. No locked boot loader . I always thought HTC was the only phones with locked boot loaders . I have been doing a lot of reading prior to posting this question and have been up all night . After bricking last night and recovering from it I got a crash course with this device.
spirodave said:
I am on MK2 4.3 and I have Safestrap installed and I installed the recovery and when I reboot into recovery It goes to the Custom screen then it fails to Go to the Splash screen where I can choose to go into TWRP . I had this working on MF3 but I had bricked my phone and and had to flash the allin one to fix it . I am successfully rooted with safestrap installed .. ANY IDEAS would be greatly appreciated...Thanks By the way it Says Safe system : Not Active. I thought I remember it saying Active before
Also is there another way to install a Recovery. Im coming from a Tmobile GS2 where you could flash recovery once within Odin and after that you could just flash different versions of Twrp or Cwm when needed. No locked boot loader . I always thought HTC was the only phones with locked boot loaders . I have been doing a lot of reading prior to posting this question and have been up all night . After bricking last night and recovering from it I got a crash course with this device.
Click to expand...
Click to collapse
Check your root condition is valid. If you do not have root you can not install the safestrap recovery.
To go to the safestrap you do not need to reboot into the recovery. You simply reboot as normal and safestrap splash screen would come up.
You can use odin to flash the recovery in the download mode or you can use adb command to push the recovery.
AT&T and verizon G4 bootloaders are locked. You can not unlock like HTC S-off. You can only exploit the bootloader with different methods based on your firmware version.
Simply reboot the phone and on boot up it will show you the splash screen. Not active means that stock slot is still selected.
Sent from my SGH-I337 running GPE using Tapatalk
sway8966 said:
Check your root condition is valid. If you do not have root you can not install the safestrap recovery.
To go to the safestrap you do not need to reboot into the recovery. You simply reboot as normal and safestrap splash screen would come up.
You can use odin to flash the recovery in the download mode or you can use adb command to push the recovery.
AT&T and verizon G4 bootloaders are locked. You can not unlock like HTC S-off. You can only exploit the bootloader with different methods based on your firmware version.
Click to expand...
Click to collapse
Im an idiot. I just realized I have been using the safestrap.apk I had on my sd that was for MF3. This will be my problem
jmjoyas said:
Simply reboot the phone and on boot up it will show you the splash screen. Not active means that stock slot is still selected.
Sent from my SGH-I337 running GPE using Tapatalk
Click to expand...
Click to collapse
Im an idiot. I just realized I have been using the safestrap.apk I had on my sd that was for MF3. This will be my problem..Problem solved.When you said the wrong slot was selected it made a light bulb light up in my head..Thanks bro

Boot loader not updating

Im having a problem updating my boot loader. Im on the latest stock tw for i9505 and have flashed stock then rooted and im using a custom rom. However when i flash the updated bootloader file with modem it does not update. My boot loader is still on XXUGNI2!!
olster said:
Im having a problem updating my boot loader. Im on the latest stock tw for i9505 and have flashed stock then rooted and im using a custom rom. However when i flash the updated bootloader file with modem it does not update. My boot loader is still on XXUGNI2!!
Click to expand...
Click to collapse
just take out the battery and put it again then use the combo vol - and pwr and home then use the original usb cable and use a usb 2 port you will be fine.....
dont use the reboot to bootloader option to do the flash not working
nikkpap said:
just take out the battery and put it again then use the combo vol - and pwr and home then use the original usb cable and use a usb 2 port you will be fine.....
dont use the reboot to bootloader option to do the flash not working
Click to expand...
Click to collapse
Thanks for replying, i will give that a go, but Im also trying to update my TWRP im still on 2.8.5.0 and trying to flash to 2.8.6.0 but every time i flash to recovery it does not change? I've powered down my phone, taken battery out and put it back in and doing the button procedure for download mode.
Regarding the recovery, the guys who maintain TWRP forgot to change the version number internally for 2.8.6.0. How do I know this, you might ask? Well, I never could install 2.8.5.0 on my S4, as there was a bug in it where the device would hang on trying to enter recovery. Thus I had to stick with 2.8.4.0. When I did the update, 2.8.5.0 appeared on the screen, and since I never had a working copy of 2.8.5.0, the TWRP guys must not have changed the version number.

Bricked s5 Help

OK so I flashed marshmallow on my galaxy s5 g900a it said pass on Odin but on restart it freezes at the att logo. I went to recovery and factory reset but when the rebooted it said "Android is starting optimizing apps" after it does that my phone restarts and the same problem happens. Help please!!!!!
it's not bricked that's all what I know
just try to flash the rom again
or try to install twrp and flash a custom rom
abdellahboughrom said:
it's not bricked that's all what I know
just try to flash the rom again
or try to install twrp and flash a custom rom
Click to expand...
Click to collapse
how do i install twrp? remember it freezes at the att splash screen I have been without my phone for over 12 hours now I need immediate help
hope u have an unlocked bootloader.. if u do just download twrp the zip one not the image.. for s5 and flash it using Odin.
or go to recovery mode do a full wipe and f.reset then put your phone in download and flash a new stock rom..
If its AT&T and MM has been flashed then it will have a locked bootloader and rooting via cf or twrp will not work.
The only thing that will successfully flash now is AT&T branded MM. You can't even roll back to lollipop or kitkat.

Categories

Resources