Hi,
While flashing Blepart 2.x Partition I got this Status 7 error. I did'nt knew how to resolve it. So, I googled it and searched many threads relating to this problem. The guides were totally meant for ROMS so i experimented the same thing with the partition I had and voila it worked like a charm .
NOTE: I am not responsible for your device if anything goes wrong like bricked etc. You follow this guide at your own risk. And this guide is solely meant for Huawei U8800 Ideos X5.
These are the steps:
1. First extract your Partition Scheme (Winrar, Winzip, 7-Zip)
2. Go to the folder META_INF > COM > GOOGLE > ANDROID
3. Here you will find a file "updater-script"
4. Open the "updater-script" with notepad++.
5. Delete text, starting from "assert till the semicolon of the last getprop command. (see image in attached file-lines to delete)
6. Save the file and zip it again and Reflash. And now you have new partition scheme.
Hope this Helps..
This is actually a caution, to make sure the partition table is installed using BlePart recovery. However, I guess you installed it normally (not using BlePart recovery), and if it works the same, maybe I can remove BlePart recovery altogether. The only reason I did that was because the /cache mounting. CWM likes to store the logs on that partition, and when changing partition table, it can cause bad things to happen. BlePart 2.x only modifies the last 3 partitions, hence it does not change /cache position in the EMMC or anything. I will look into it.
Blefish said:
This is actually a caution, to make sure the partition table is installed using BlePart recovery. However, I guess you installed it normally (not using BlePart recovery), and if it works the same, maybe I can remove BlePart recovery altogether. The only reason I did that was because the /cache mounting. CWM likes to store the logs on that partition, and when changing partition table, it can cause bad things to happen. BlePart 2.x only modifies the last 3 partitions, hence it does not change /cache position in the EMMC or anything. I will look into it.
Click to expand...
Click to collapse
thnx for the reply, however I did flash it with Blepart recovery....
I think that in some cases the problem is the wrong recovery i almost did that because i haven t read the instructions completely when downloading the files and preparing to install blepart and cm11.
help
when I'll install google apps i have the error 7
"Set_metadata_recursive: some changes failed
E: error in / storage/sdacrd0/gapps...zip
(status7)
Installation aborted. "
Do the same procedure described here?
thanks
heee said:
when I'll install google apps i have the error 7
"Set_metadata_recursive: some changes failed
E: error in / storage/sdacrd0/gapps...zip
(status7)
Installation aborted. "
Do the same procedure described here?
thanks
Click to expand...
Click to collapse
sorry i cant help you in that case coz i didnt get this error before ask blefish or give it a shot....
Yes me too but I reboot it later and everything was normally. Don't think about that and reboot. I'm using kitkat now.
Sorry for my bad english
rsim said:
Yes me too but I reboot it later and everything was normally. Don't think about that and reboot. I'm using kitkat now.
Sorry for my bad english
Click to expand...
Click to collapse
I did that too xD
Enviado do meu IDEOS X5 através de Tapatalk
Im using forumber partition scheme. Do i need to wipe something to install the blepart scheme?
Without wipes i get errors, but not the status 7 one. I already modified the updater script.
bassdrum01 said:
Im using forumber partition scheme. Do i need to wipe something to install the blepart scheme?
Without wipes i get errors, but not the status 7 one. I already modified the updater script.
Click to expand...
Click to collapse
whats the error u get??? have u tried installing cm11 on the current partition??
I tried to install the cm11 but that to doesn't work. I get error. I forgot to write the errors. Sorry
bassdrum01 said:
I tried to install the cm11 but that to doesn't work. I get error. I forgot to write the errors. Sorry
Click to expand...
Click to collapse
Have you flashed the blepart partition scheme with blepart recovery?
Related
Im using a levovo a6000 android phone after rooting my phone i tried to install a custom rom
then when i checked my internal memory it was showing a 0mb of internal memory
the errors are as follows
1. E : unable to mount /data/media/TWRP/ .twrps when trying to read setting file.
2. E: Unable to mount '/data'
3. E: unable to mount '/storage'
Even on wiping dalvik cache and cache
i have rooted my phone using amd command prompt help me ee
nikhil7870 said:
Im using a levovo a6000 android phone after latest offical android update given by lenovo came my phone booted ok
then when i checked my internal memory it was showing a 0mb of internal memory
the errors are as follows
1. E : unable to mount /data/media/TWRP/ .twrps when trying to read setting file.
2. E: Unable to mount '/data'
3. E: unable to mount '/storage'
Even on wiping dalvik cache and cache
i have rooted my phone using amd command prompt help me ee
Click to expand...
Click to collapse
How did you managed to install the ota update on rooted device....!??
oops sorry its my friend mistake
sasukay said:
How did you managed to install the ota update on rooted device....!??
Click to expand...
Click to collapse
i had flashed a custom rom through TWRP please help me to figure it out
nikhil7870 said:
i had flashed a custom rom through TWRP please help me to figure it out
Click to expand...
Click to collapse
Boot into twrp and wipe cache, dalvik, data and system. Then flash the custom rom
sasukay said:
Boot into twrp and wipe cache, dalvik, data and system. Then flash the custom rom
Click to expand...
Click to collapse
while wiping data, cache , dalvik cache ,system, cache , data
its give a error wipe complete failed
and another error is
E: UNABLE TO MOUNT '/DATA'
E: UNABLE TO MOUNT STORAGE
Can xda developer fix my problem i think that xda is best and i always follow them but now i cannot get any help from you please help me
nikhil7870 said:
Can xda developer fix my problem i think that xda is best and i always follow them but now i cannot get any help from you please help me
Click to expand...
Click to collapse
Flash cwm any try wiping and then flash new rom from
http://forum.xda-developers.com/showpost.php?p=66472910&postcount=4
sasukay said:
Flash cwm any try wiping and then flash new rom from
http://forum.xda-developers.com/showpost.php?p=66472910&postcount=4
Click to expand...
Click to collapse
I think ur system partions is corupted
amithchinu said:
I think ur system partions is corupted
Click to expand...
Click to collapse
if it is corrupted then how to fix it and can u tell me how to do repartition
Go here http://forum.xda-developers.com/showthread.php?t=2683787 u will get solution
---------- Post added at 02:55 AM ---------- Previous post was at 02:54 AM ----------
If it does not work goto service center
amithchinu said:
Go here http://forum.xda-developers.com/showthread.php?t=2683787 u will get solution
If it does not work goto service center
Click to expand...
Click to collapse
You might not know this, but every device has its own different system partitions. The thread you were referring to is for Asus Transformer Pad. Following that might make the problem worse.
But this is ASus phone it works on lenovo a6000
sasukay said:
You might not know this, but every device has its own different system partitions. The thread you were referring to is for Asus Transformer Pad. Following that might make the problem worse.
Click to expand...
Click to collapse
No bro it has sameproblem unable to mount data and cache there is solution to solve
amithchinu said:
No bro it has sameproblem unable to mount data and cache there is solution to solve
Click to expand...
Click to collapse
In that tutorial mmcblk0p8 is being formatted because that memory location has the /data directory on Asus Transformer. But, in our device the /data can be in any other partition, and doing that might brick the device permanently
Delete the recovery log from twrp folder and flash another twrp from flashtool or rash..what version are you using? If it is indeed a corrupted partition, you can reflash your phone using qfill
Try using the Fix Permissions in TWRP recovery...
It may help.
:fingers-crossed:
@nikhil7870 do you solve this problems?
nikhil7870 said:
Im using a levovo a6000 android phone after rooting my phone i tried to install a custom rom
then when i checked my internal memory it was showing a 0mb of internal memory
the errors are as follows
1. E : unable to mount /data/media/TWRP/ .twrps when trying to read setting file.
2. E: Unable to mount '/data'
3. E: unable to mount '/storage'
Even on wiping dalvik cache and cache
i have rooted my phone using amd command prompt help me ee
Click to expand...
Click to collapse
Best way is install the latest twrp I.e 3.0.2 and do the format everything instead of advanced wipe. Your problem will be solved. I too faced the same problem and I did what I have advised you. It worked.
cyberwarrior_a said:
Best way is install the latest twrp I.e 3.0.2 and do the format everything instead of advanced wipe. Your problem will be solved. I too faced the same problem and I did what I have advised you. It worked.
Click to expand...
Click to collapse
Is the problem resolved??
I have solution
Bro don't take so much tension , thats not hardware problem its only your Recovery's reading cache error . you can simply fix this by flashing old version of recovery and from that old recovery again wipe what you want to remove but man don't touch your mount section column , after wiping data and anything else simply flash new twrp.img then simply reboot recovery . wollllaaa you got your partion cache back now again you can simply flash you favorite roms. I hope you understand what you have to do now . But please follow these steps carefully :good: .
Remember don't flash KitKat recovery over lolipop recovery otherwise you got bootloop. Old recovery means suppose if you have now twrp v 3.1 just simply flash v2.8 then after wiping things you want , then simply flash twrp v 3.1 .
If you still have any doubt you can contact me via WhatsApp - +91 9205097520 (indian no. ) or simply reply me on xda or simply mail me at - [email protected] . And at last don't forget to tell me about your device problem .
im using ASUS Zenfone 5 as my daily driver since it was came out. before everything screwed up, im using XOSP 6.3 it was stable, but recently bugging. first time i unlock bootloader with ASUS official unlocker. My history of custom rom are CM12, Ressurection Remix LP, DirtyUnicorn, Cleanstock, XOSP. long short story. im trying tanks0412's stable Ressurection Remix, follow the precise of the instruction which is wiping System, dalvik, cache, data and internal. wiping internal which leads me to this problem, this problem has been occured 1-2 times when i did it and i succesfully fix it by flashing RR LP or somehow it fixed. but this time, it wont. its been 3 days.
- it shows error 7 when flash rom, tried to remove asserts line in the rom. wont work
- TWRP shows internal storage 0 MB. tried to remount system with terminal. wont work
- tried to update TWRP, flashing via flashboot. wont work
- tried to downgrade TWRP to 2.8.7.0 with Zenfone Asist. wont work
- tried to flash CM13.1 system image with Zenfone Asist. says okay, everything fine in bootloader. reboot to recovery, says no os installed. Cant boot to system.
Device info =
ASUS Zenfone 5
- 8 GB internal storage
- 32 GB external storage
- 2 GB RAM
- ASUS T00J/F (i forgot)
- A500CG
- TWRP 3.0.M2-0
this is my first thread. correct me if im wrong
PLEASE HELP:crying:
Same problem
I'm having the same problem.. Did you find any solution for that?
Has anyone fixed this prob yet? Im facing it right now and it say failed to mount system data and cache.
earl0325 said:
Has anyone fixed this prob yet? Im facing it right now and it say failed to mount system data and cache.
Click to expand...
Click to collapse
Did you guys tried formatting data ? Don't wipe data but format data . I ran into this problem once this fixed the problem.
@Arrvinkumar
Boomshiva said:
Did you guys tried formatting data ? Don't wipe data but format data . I ran into this problem once this fixed the problem.
@Arrvinkumar
Click to expand...
Click to collapse
I tried that also stil facing the same errors.
Try this steps carefully :
1. Wipe cache, dalvic cache, system, data and internal storage.
2. After wiping press format data and then type "yes" .
3. After formating data, now go to install and flash the ROM you want with gapps.
4. After flashing rom and gapps now reboot system.
5. First boot will take some time.
(Note: keep in mind that after wiping cache,dalvik,system,data,internal you have to do format data (which you will see in bottom right corner of wipe section) )
Whenever I install new custom rom, i use only these steps. I never encounter these problems as i always format my data.
Try this things,hope you will use your device.
Sent from my Asus ZenFone 5 (A500CG) using XDA Labs
juyel92 said:
Try this steps carefully :
1. Wipe cache, dalvic cache, system, data and internal storage.
2. After wiping press format data and then type "yes" .
3. After formating data, now go to install and flash the ROM you want with gapps.
4. After flashing rom and gapps now reboot system.
5. First boot will take some time.
(Note: keep in mind that after wiping cache,dalvik,system,data,internal you have to do format data (which you will see in bottom right corner of wipe section) )
Whenever I install new custom rom, i use only these steps. I never encounter these problems as i always format my data.
Try this things,hope you will use your device.
Sent from my Asus ZenFone 5 (A500CG) using XDA Labs
Click to expand...
Click to collapse
I still have the error after trying your guide.
Failed to mount '/system' (invalid argument)
Failed to mount '/data' (invalid argument)
Failed to mount '/cache' ( invalid argument)
I badly need to fix this so i can use my phone again
earl0325 said:
I still have the error after trying your guide.
Failed to mount '/system' (invalid argument)
Failed to mount '/data' (invalid argument)
Failed to mount '/cache' ( invalid argument)
I badly need to fix this so i can use my phone again
Click to expand...
Click to collapse
Okay.
First check weather its mounted or not.
To do this go to twrp recovery mode, select Mount and check [√] every option. After that try to flash the rom again. It seems like your system,data and cache is not mounted. See if that helps or not.
Sent from my Asus ZenFone 5 (A500CG) using XDA Labs
juyel92 said:
Okay.
First check weather its mounted or not.
To do this go to twrp recovery mode, select Mount and check [√] every option. After that try to flash the rom again. It seems like your system,data and cache is not mounted. See if that helps or not.
Sent from my Asus ZenFone 5 (A500CG) using XDA Labs
Click to expand...
Click to collapse
It is not mounted and i cannot mount it on the TWRP>mount. Even though I pressed it, it doesnt [√]
earl0325 said:
It is not mounted and i cannot mount it on the TWRP>mount. Even though I pressed it, it doesnt [√]
Click to expand...
Click to collapse
Which version of twrp you are running?
juyel92 said:
Which version of twrp you are running?
Click to expand...
Click to collapse
Im on twrp 3.0m4.0
earl0325 said:
Im on twrp 3.0m4.0
Click to expand...
Click to collapse
Do one thing just revert back to stock ROM. After that root it again, unlock bootloader and install latest twrp and flash the custom ROM again.
juyel92 said:
Do one thing just revert back to stock ROM. After that root it again, unlock bootloader and install latest twrp and flash the custom ROM again.
Click to expand...
Click to collapse
I cant even revert to stock rom because when i flash fastboot.img and recovery.img then i try to enter recovery it leads me to twrp not the stock. Btw im the one your helping in the RR Nougat thread of tank
In twrp go to advanced -> select data -> change filesystem type and change it to f2fs and then ext4 after that. Do that with all the partitions
Adrao123 said:
In twrp go to advanced -> select data -> change filesystem type and change it to f2fs and then ext4 after that. Do that with all the partitions
Click to expand...
Click to collapse
Still didn't fixed the problem sir.
earl0325 said:
I tried that also stil facing the same errors.
Click to expand...
Click to collapse
Flash original kernel with adb command. hope u fix it
Kevin [email protected] said:
Flash original kernel with adb command. hope u fix it
Click to expand...
Click to collapse
Whre can i get the original kernel and can u give me the code yo input to flash kernel? Thanks ill try your recommendation.
im facing the sam problem too.. anyone can help???
kurzwelll said:
im facing the sam problem too.. anyone can help???
Click to expand...
Click to collapse
In your twrp does it also say failed to mount /system,/data, and /cache (invalid argument)
earl0325 said:
In your twrp does it also say failed to mount /system,/data, and /cache (invalid argument)
Click to expand...
Click to collapse
yess,, i face the same problem too.. i have trying install every rom but nothing change,, it just failed prosses after all... everything is "failed to mount" in twrp
I tried dual boot my redmi note 4g using an chinese software. As I don't know chinese Ijust followed instructions given on source site. I got dual boot on my phone successfully. But after incomplete installation of second rom i wiped cache which cause my phone an bootloop formatting my internal memory.
I tried installing official miui rom through recovery. But TWRP gave me error of unable to mount /system.
After some research I found that
Code:
/dev/block/platform/sdcc.1/by-name/system2
is causing problem.
This file mounts at /system partition. The actual name should be
Code:
/dev/block/platform/sdcc.1/by-name/system
.
I want to rename this file. I tried many ways but it gets renamed back after each reboot. This is also preventing from installing rom through fastboot method. I guess I will have to do changes somewhere else through partition table. I don't know much about this so what exactly I should do to rename
Code:
/dev/block/platform/sdcc.1/by-name/system2
to
Code:
/dev/block/platform/sdcc.1/by-name/system
.
Sorry for bad english.
hello there!
some months ago i tried a custom firmware on my 9506 (i think that was the first version of arya mod) but i didnt kinda like it so i downloaded again the stock fw and flashed it back.
i did my typicall "download the basic apps" routine and on the 4th app an "insufficient storage available" message appeared on my screen and i was like "lol whats wrong?" i checked on and i found that 10.6Gb was used by system.
Well i thought that i downloaded maybe a bugged stock rom and i didnt have the free time at the time to check whats wrong so i decided to live with it till i find some spare time to check it again.
Yesterday i downloaded and flashed the lineage os fw and i was sure that this would fix the problem...but...well it didnt..still 10.6 used by system.
i tried wipe EVERYTHING (dalvik/cache/system/internal) and reflashed again but still nothing,i flashed again the stock rom,still nothing, i searched online but i didnt find a solution, i downloaded diskusage app to see where are those 10gbs but i couldnt figure out where they where.
So if anyone knows anything or had the same or similar problem it would be great if he/she write here and give a solution or some tips.
Thanks in advance
Try format data from recovery.
Pwnycorn said:
Try format data from recovery.
Click to expand...
Click to collapse
Thanks for your reply!
You mean the wipe option or am i missing something?
I did wipe everything via twpr recovery from the "advanced wipe option" and checked everything except my sdcard and still nothing.
is there any other way to completly format it ? if so,then how i can do it?
bakos360 said:
Thanks for your reply!
You mean the wipe option or am i missing something?
I did wipe everything via twpr recovery from the "advanced wipe option"
Click to expand...
Click to collapse
There's a format data option there too.
Pwnycorn said:
There's a format data option there too.
Click to expand...
Click to collapse
lol i didnt see it and it was in front of my eyes!
i tried that too today but here is what is happening
Updating partition details...
...done
Full SELinux support is present.
Running boot script...
Done.
MTP enabled
E:unable to wipe '/data' -- unknown file system ' auto enable to format to remove encryption.
Mount media patd for recreate TWRP settings. /data/media/o
TWRP settings saved
Updating partition details...
...done..
for some reason it seems that its enable to format '/data'
any other option ? =/
bakos360 said:
lol i didnt see it and it was in front of my eyes!
i tried that too today but here is what is happening
Updating partition details...
...done
Full SELinux support is present.
Running boot script...
Done.
MTP enabled
E:unable to wipe '/data' -- unknown file system ' auto enable to format to remove encryption.
Mount media patd for recreate TWRP settings. /data/media/o
TWRP settings saved
Updating partition details...
...done..
for some reason it seems that its enable to format '/data'
any other option ? =/
Click to expand...
Click to collapse
Try flashing the stock ROM together with a PIT file
i fixed it guys
i flashed again cwm recovery and i formated EVERYTHING from there and then reflashed again the rom and gapps and that fixed the problem.
Thanks for your help !
For the record, CWM's incremental backup feature was what I believe was stealing your space. If you still have CWM on that device, make sure to set the default nandroid backup format to ".tar" instead of ".dup", clear out your nandroid backups, clear all the allocated space, and then upgrade to the latest version of TWRP.
CWM hasn't been updated in a few years now and has difficulty installing modern ROMs.
you are right i think.
if i recall corectly when i flashed that rom back then before the problem appeared, i used cwm recovery so yeah maybe thats the main reason that this happened.
i allready set the default backup to .tar and cleared out all the nandroid backups and i allready use TWRP now.
thanks for the tip mate!
Hello guys,
i've just received the Android 8.0.0 and as soon as i got it, i root-ed it. Now everything is fine but the only problem i have is that i cannot backup the whole system as it is right now with TWRP.
When i open TWRP in boot and i go to backup all files it gives me the following error : "unable to mount //data". How can i solve this problem without formatting it again ?
Thank you.
P.S : i added a photo as an attachment with the error.
Format both to fat and back to ext4. I would like to know if there is another way. You can backup needed apps with titanium and restore later.
Extreemator said:
Format both to fat and back to ext4. I would like to know if there is another way. You can backup needed apps with titanium and restore later.
Click to expand...
Click to collapse
When you say both, you mean "data" and what else ?
LE: I did it for "data" and now it seems to work but will try when i have the whole rom ready.
Thanks.
Update : for that time being, it seemed to work. After that i installed all the apps and did all the settings and now when i go to backup it gives me the same error. This is a part of the recovery.log after the failed backup. By the way, it failed at almoast 95% .
".....................
Digest Created.
Iartition Backup time: 659
Failed to mount '/data' (No such process)
I:Actual block device: '/dev/block/sda24', current file system: 'ext4'
Backup Failed"
Cleaning Backup Folder"
Can anybody help me ?
ownage16 said:
Update : for that time being, it seemed to work. After that i installed all the apps and did all the settings and now when i go to backup it gives me the same error. This is a part of the recovery.log after the failed backup. By the way, it failed at almoast 95% .
".....................
Digest Created.
Iartition Backup time: 659
Failed to mount '/data' (No such process)
I:Actual block device: '/dev/block/sda24', current file system: 'ext4'
Backup Failed"
Cleaning Backup Folder"
Can anybody help me ?
Click to expand...
Click to collapse
Did you first format data to fat and back to ext4 and it got fixed?; was it showing free space in /data/media, not like on screenshot where is 0mb and it's broken? after you tried to backup it broke in the process? Try to wipe, install custom rom and back up it. Try external sd
https://forum.xda-developers.com/showpost.php?p=75360965&postcount=22
Extreemator said:
Did you first format data to fat and back to ext4 and it got fixed?; was it showing free space in /data/media, not like on screenshot where is 0mb and it's broken? after you tried to backup it broke in the process? Try to wipe, install custom rom and back up it. Try external sd
Click to expand...
Click to collapse
After the first format it got fixed, yes. And i did make a back-up.
After that, i booted, i installed apps and so on and when i came back to twrp the error reappeared and /data got corrupted again.
ownage16 said:
After the first format it got fixed, yes. And i did make a back-up.
After that, i booted, i installed apps and so on and when i came back to twrp the error reappeared and /data got corrupted again.
Click to expand...
Click to collapse
Read the link I post earlier.
master64nl said:
https://forum.xda-developers.com/showpost.php?p=75360965&postcount=22
Click to expand...
Click to collapse
I never got blocked out for 7 days even though i installed at least 20 times different roms in the past days.
When i rooted i installed the RMM .zip . Are you sure it's from there ?
Yes, I had the same problem. I am back on Android 7 until there is a good discribtion in the right order to get it right. No one can tell me the right solution. They are all diferent. So I wait for now.
Verstuurd vanaf mijn SM-G950F met Tapatalk
I've tried using a twrp for oneplus 5 because they seem to have had the same problem. The good news is that is seemed to work as the /data remained ok. The bad news is that the phone would enter a loop.
https://forum.xda-developers.com/showpost.php?p=76010250&postcount=1567
master64nl said:
Yes, I had the same problem. I am back on Android 7 until there is a good discribtion in the right order to get it right. No one can tell me the right solution. They are all diferent. So I wait for now.
Verstuurd vanaf mijn SM-G950F met Tapatalk
Click to expand...
Click to collapse
I found the fix !!
dr.ketan helped me make the right files to flash. Now i have made the first FULL backup and i am amazed it works. In recovery /data appears mounted. I went there 3 times to make sure :fingers-crossed:
If you want to I will ask dr. ketan if i can upload the files.
Thanks for the help and have an easy day!
OKé, is he on the forum, dr ketan? Perhaps you can tell us now because you have the solution.
master64nl said:
OKé, is he on the forum, dr ketan? Perhaps you can tell us now because you have the solution.
Click to expand...
Click to collapse
Wait
I am posting here with details in an hour
Edit : It's here
https://forum.xda-developers.com/galaxy-s8/how-to/fix-data-mount-fix-s8-twrp-oreo-t3769254
dr.ketan said:
Wait
I am posting here with details in an hour
Edit : It's here
https://forum.xda-developers.com/galaxy-s8/how-to/fix-data-mount-fix-s8-twrp-oreo-t3769254
Click to expand...
Click to collapse
What is the right order for installing everything?
I will start first with installing the original stock rom for my S8. How to go on from the stock oreo?
master64nl said:
What is the right order for installing everything?
I will start first with installing the original stock rom for my S8. How to go on from the stock oreo?
Click to expand...
Click to collapse
After having the Oreo stock firmware follow these steps :
https://www.youtube.com/watch?v=XNznlTJJesc
Btw: i also used the files the youtube guy provided and they are OK
After you have completed the video follow what @dr.ketan posted
ownage16 said:
After having the Oreo stock firmware follow these steps :
https://www.youtube.com/watch?v=XNznlTJJesc
Btw: i also used the files the youtube guy provided and they are OK
After you have completed the video follow what @dr.ketan posted
Click to expand...
Click to collapse
That seems to be double to me. If you follow the video you are okay but you can also do dr. ketan way and you are okay. Am I right?
master64nl said:
That seems to be double to me. If you follow the video you are okay but you can also do dr. ketan way and you are okay. Am I right?
Click to expand...
Click to collapse
if you follow the video you have the "/data" problem and after that you solve it with the solution from dr. Ketan.
I don't know if you can flash directly the zip from dr. ketan, haven't tried it. In theory it should work but i can only confirm what worked for me.
Keep me updated on what you did.
Best step if one is on oreo stock and just want twrp +root
1.flash twrp with format data (will wipe Int storage)
2.flash magisk (from ext SD)
3.flash data mount fix(from ext SD)
All three to be flashed without reboot in between
Then must have to reboot to system
Now next time when reboot to recovery, data will available in twrp
Who already have oreo rom +twrp then simply flash data mount
Who are on nougat custom and want oreo custom rom
1.factory reset (no need to format data)
2.flash oreo custom rom
3.flash magisk if rom doesn't included
4.flash data mount fix
Reboot to system once
Done
dr.ketan said:
Best step if one is on oreo stock and just want twrp +root
1.flash twrp with format data (will wipe Int storage)
2.flash magisk (from ext SD)
3.flash data mount fix(from ext SD)
All three to be flashed without reboot in between
Then must have to reboot to system
Now next time when reboot to recovery, data will available in twrp
Who already have oreo rom +twrp then simply flash data mount
Who are on nougat custom and want oreo custom rom
1.factory reset (no need to format data)
2.flash oreo custom rom
3.flash magisk if rom doesn't included
4.flash data mount fix
Reboot to system once
Done
Click to expand...
Click to collapse
This sequence is no needed anymore???
1.flash twrp
2.format data say yes
3.go in recovery
4.flash dm-verity and force encryption disabler (from ext SD)
5.flash magisk (from ext SD)
6.flash data mount fix(from ext SD)
All four to be flashed without reboot in between
Then must have to reboot to system
Now next time when reboot to recovery, data will available in twrp