Hi,
I have been wondering if there is any possibility of increasing the multitouch on my u8800. Its currently on two finger touch and i am using Blefish's CM11 rom. My TS is synaptics. Can I have like 3 to 5 finger touch???
As far as I know, Synaptics TS is hard-limited to 2 points. It could be possible in hardware, but it would involve replacing the firmware on the chip. But on Atmel TS it's possible and implemented. Atmel TS has a firmware too, but it also has configuration. Configuration allows the changing of multiple parameters, including number of points tracked.
Problem installing gapps on CM11
Hi...
I have installed CM11 and until now there are no serious problems. Almost every thing works well so far.
However I have not been able to install gaps after several attempts. Is there someone who can help me to solve this problem.
Your help would be greatly appreciated.
Thanks in advance
Related
many of us having the same problem. i was using android nand rom for last two monts, everything was perfect. I did a screen replacement last week, and after that 'g sensor' is not working with android. not pnly g sensor, also proximity sensor and magneto sensor. but the thing is, every sensor is working with winmo 6.5, even with wp7.
i have tried several build, changed hspl...nothing worked. many of us are having the same problem.
all you brilliant people, someone help us man.
This seems to be a general problem After a screen replacement the G-Sensor in Android stops working.
Can anyone can tell us how we can fix this, i.e. what info can we supply to the ROM chefs and kernel gods to help them get to the bottom of this?
Hi,
I own HTC HD2 and recently it stoped working and i had to send it to be repaired. They have changed the board because the CPU has malfunctioned. Since then accelrometer is not working in any rom. It only works in Windows. I could not find any answers except that the new board installed could be unsupported in android builds.
Any help is appreciated.
Help
duh2010 said:
Hi,
I own HTC HD2 and recently it stoped working and i had to send it to be repaired. They have changed the board because the CPU has malfunctioned. Since then accelrometer is not working in any rom. It only works in Windows. I could not find any answers except that the new board installed could be unsupported in android builds.
Any help is appreciated.
Click to expand...
Click to collapse
I also found out that several more users in Serbia have this issue. Anbody else? Plese help?
This is a Driver issues, maybe the new board has some different Component, but is not only the g-Sensor, the Magnetic Field and Orientation aren't Working, this kind of problem take to long time to be fixed, now that the developers are Focused on ICS. I'm thinking to sell my HD2 and Buy Another one.
ataria2 said:
This is a Driver issues, maybe the new board has some different Component, but is not only the g-Sensor, the Magnetic Field and Orientation aren't Working, this kind of problem take to long time to be fixed, now that the developers are Focused on ICS. I'm thinking to sell my HD2 and Buy Another one.
Click to expand...
Click to collapse
Maybe it will work in ICS if only we had the patience to wait.
It is wery strange to use a phone that does not have any rotation whatsoever. You have to try and take a picture or to watch a klip that is stuck in portrait mode and want turn. I cant belive that no one has solved this yet. PLEASE HELP!
Hello ,
I wanted to ask you all that are you able to use the roms properly without touch issues that are compiled with kernel 4.9 ?
i got my screen replaced in the market so help me are people who are not having screen replacement done ! are you facing the same issue like your touch become unresponsive after locking the phone ?
its just because of your Touchscreen replacement other then there is no touch issue on original touchscreen i used roms with 4.9kernel and they works fine no issue of touchscreen
Hi all. First I want to clarify that I am using a translator to write this, since I am Argentine and my English is half basic.
I have in my hands a Xiaomi m9t two months ago, which I bought again as an importer. After a few weeks I realized that I had a gyroscope fault in which the z axis was at a constant speed of 1 rad / s. I tried doing a wipe which had no solution. An important fact is that when I used image stabilization for video, it inclined it and with a few small strokes in the cameras sector, the z-axis speed was reduced ...
Then I tried reinstalling the firmware again and I was able to calibrate the gyroscope, however it has very little sensitivity with respect to the other x and y axes, it practically remains at 0 all the time. Anyone know any solution to this or rule out what is hardware? I saw that some modifying a persist file managed to solve.
AxelVonka said:
Hi all. First I want to clarify that I am using a translator to write this, since I am Argentine and my English is half basic.
I have in my hands a Xiaomi m9t two months ago, which I bought again as an importer. After a few weeks I realized that I had a gyroscope fault in which the z axis was at a constant speed of 1 rad / s. I tried doing a wipe which had no solution. An important fact is that when I used image stabilization for video, it inclined it and with a few small strokes in the cameras sector, the z-axis speed was reduced ...
Then I tried reinstalling the firmware again and I was able to calibrate the gyroscope, however it has very little sensitivity with respect to the other x and y axes, it practically remains at 0 all the time. Anyone know any solution to this or rule out what is hardware? I saw that some modifying a persist file managed to solve.
Click to expand...
Click to collapse
I had sensors problem (but wasn't so specific as yours, all sensors didn't work) and the only fix was flash a new persist partition.
BUT.. you will lose L1 DRM if you do so. so idk, if you can send it back it's better
Same problem here unfortunately ? did you manage to get it fixed somehow?
I have the same problem here. I tried flashing new persist.img but that didn't help.
I also modified calibration values in /persist/sensors/registry/registry/icm4x6xx_0_platform.gyro.fac_cal.bias but that didn't make any difference.
It's only the gyro z axis which is strange, the other axis works fine.
Did OP sort this out in the end?
cyferc said:
I have the same problem here. I tried flashing new persist.img but that didn't help.
I also modified calibration values in /persist/sensors/registry/registry/icm4x6xx_0_platform.gyro.fac_cal.bias but that didn't make any difference.
It's only the gyro z axis which is strange, the other axis works fine.
Did OP sort this out in the end?
Click to expand...
Click to collapse
have u managed to solve the problem?
elrolaso said:
have u managed to solve the problem?
Click to expand...
Click to collapse
Sorry for late reply, no I didn't solve it. Still looking for a way to fix this...
I haven't done anything unusual really, just went from stock 7.0, unlocked BL through Odin, wiped and then installed scripted's Lineage and all my sensors are not working (light, prox, rotation, etc.). Anyone have any solution for this? Or if there is a way to reset to the latest official ROM and try again that would be helpful too.
Update: I flashed stock and the sensors still do not work.
jayloofah said:
I haven't done anything unusual really, just went from stock 7.0, unlocked BL through Odin, wiped and then installed scripted's Lineage and all my sensors are not working (light, prox, rotation, etc.). Anyone have any solution for this? Or if there is a way to reset to the latest official ROM and try again that would be helpful too.
Click to expand...
Click to collapse
Normally i only use stock rom but have installed Lineage 17.1.
In some cases settings will have to be turn on.
eg: Screen rotation - go into settings - Display - advance - Rotation settings
Rotate Home Screen - long press on home screen - select Home settings
If in doubt you can re-flash lineage in twrp or stock rom with Odin.
Thanks for your suggestion. However, I just flashed the stock rom with Odin and the sensors are still not registering, no reading from any of them? I'm really not sure what to do, I feel like maybe some file was wipe in TWRP that registered the sensors?
If you have any protective case remove it and test.
On stock rom in phone app enter *#0*# should bring up a test menu which you can test your sensors or you can download from playstore ( or other mirror sites ) apps which will test your senors eg: cpu-z, samsung phone info.
This appears to be a bigger issue, one that appeared via a software update. It might be hardware related. There are many other users experience the same.
jayloofah said:
This appears to be a bigger issue, one that appeared via a software update. It might be hardware related. There are many other users experience the same.
Click to expand...
Click to collapse
Rooting... experimental roms can destroy hardware. Override built in firmware safeguards.
Mostly it applies to overclocking but without knowing the exact circuit layout the engineers used, the components maximum specs and heat sinking capacity 3rd party rooms are an educated guess that could overlook critical design limitations. It could as simple as not setting a limited duty cycle to a component.
While not perhaps common, it is a risk.
Another reason why I wouldn't root a valuable device.
You can trying disconnecting the battery and hard resetting all the chipsets with the stock rom already loaded.
blackhawk said:
Rooting... experimental roms can destroy hardware. Override built in firmware safeguards.
Mostly it applies to overclocking but without knowing the exact circuit layout the engineers used, the components maximum specs and heat sinking capacity 3rd party rooms are an educated guess that could overlook critical design limitations. It could as simple as not setting a limited duty cycle to a component.
While not perhaps common, it is a risk.
Another reason why I wouldn't root a valuable device.
You can trying disconnecting the battery and hard resetting all the chipsets with the stock rom already loaded.
Click to expand...
Click to collapse
My S8 (SM-G950FD) all sensors are not working. Can anyone please help fix this?
I purchased new Samsung Galaxy S8 (SM-G950FD) just 02 weeks ago and since last Tuesday (22nd May), all sensors (iris scanner, proximity, gyroscope, compass) are not working. FYI there are no damages since it was never dropped. I suspect if it is due the firmware update 8.0. I tried factory reset...
r1.community.samsung.com
It looks as if it is a manufacturing defect rather than one from rooting/development. Perhaps disconnecting the battery might be one possible solution. I was looking into whether there is a way to discard the motherboard as there sometimes is in some laptops.
jayloofah said:
My S8 (SM-G950FD) all sensors are not working. Can anyone please help fix this?
I purchased new Samsung Galaxy S8 (SM-G950FD) just 02 weeks ago and since last Tuesday (22nd May), all sensors (iris scanner, proximity, gyroscope, compass) are not working. FYI there are no damages since it was never dropped. I suspect if it is due the firmware update 8.0. I tried factory reset...
r1.community.samsung.com
It looks as if it is a manufacturing defect rather than one from rooting/development. Perhaps disconnecting the battery might be one possible solution. I was looking into whether there is a way to discard the motherboard as there sometimes is in some laptops.
Click to expand...
Click to collapse
I hope the hard reset works.
It was operating normally until the new firmware?
There's your answer if the reset fails to work.
The mobo and displays are the most valuable components. The mobo presents more challenges than the display because it contains the device's ID and must be compatible with all the daughter PCBs/modules. So you need the correct variant. The imei issue is one I don't know enough about to address however many here do who can help you.