[Q] S3 unable to boot in recovery and download mode - Galaxy S III General

Hello everybody,
I was trying to change my ROM with the new S4 Revolution v12, but after the installation this ROM doesn't work at all.
It keeps me in the SAMSUNG logo screen or in the first page of the ROM setup.
I was trying to go in Recovery mode and/or Download mode to solve the problem but neither of these modes are now accessible.
What can I do to recover from this situation?
Thank you very much
Paluss

You are posting in the wrong place .
Presumption is that you have read the faqs and guides .
No recovery or download mode requires a paid for service repair .
But first buy a USB recovery jig to see if you can access download mode .

Sorry... thanks for your advise about usb jig.
Sent from my SM-N900V using Tapatalk

Related

About I9000 download mode Problem (phone in reload screen) Opinion please

I got one Galaxy S 1 month ago. It was simlock. i tried with Z3X and tried to patch but not done.
also this phone was 3e recovery boot i guess this is the problem.
I decide to downgrade recovery boot. also i have one firmware in i9000 folder name as downgrade 3e-2e but it was for vibrant. After update phone download mode not work. i have putted phone in DL mode with Third party software.
but update failed now phone reload screen (only pc & mobile icon on screen)
I make an JIG but not working.
what can i do.
help will be appreciated
Failing to understand your post/problem .
Question Can you get into download mode for starters .
jje
Problem was on JIG !
Now problem solve

[Q] Help needed in Bricked Phone

It would be great I you can help me.
I have a bricked Samsung Galaxy S4 i9500.
When powered on its stucked at the samsung logo.
I can enter into recovery mode but download mode is not working.
I tried factory reset and even tried to install a custom rom from recovery but cant get into sd card only shows the internal memory contents. Tried a different SD card too.
Odin method cant be used as i cant enter into download mode
. Please help I searched all over the internet for a solution.
miraclevisions said:
It would be great I you can help me.
I have a bricked Samsung Galaxy S4 i9500.
When powered on its stucked at the samsung logo.
I can enter into recovery mode but download mode is not working.
I tried factory reset and even tried to install a custom rom from recovery but cant get into sd card only shows the internal memory contents. Tried a different SD card too.
Odin method cant be used as i cant enter into download mode
. Please help I searched all over the internet for a solution.
Click to expand...
Click to collapse
Flash philz recovery..
In the power off options you have download mode
You can enter it from there
Edit : For using the Download Mode from TWRP, Press Reboot and then Download..
Sent from my GT-I9500 using XDA Free mobile app
You must be using a wrong combination of keys while trying to boot into download mode
Ok for Now your recovery is working so you can adb push a custom rom from your pc to your mobile (given that you have cwm recovery installed) then just flash it
For adb to work you need correct drivers to be installed and maybe you will also need to manually update the driver through device manager
re
Thank You very much for the help. Im kind of new to ADB how ever I managed to learn how to use it. So I inastalled it and tried by plugging the devices but S4v device is not detected when the ADB Devices command given. I tried using S duos 2 and detects fine. Im so confused with this. Also didnt the part mannually updating drivers from Android SDK Manager.
Thank You again for the Help!
dheeraj (dhlalit11) said:
You must be using a wrong combination of keys while trying to boot into download mode
Ok for Now your recovery is working so you can adb push a custom rom from your pc to your mobile (given that you have cwm recovery installed) then just flash it
For adb to work you need correct drivers to be installed and maybe you will also need to manually update the driver through device manager
Click to expand...
Click to collapse
miraclevisions said:
Thank You very much for the help. Im kind of new to ADB how ever I managed to learn how to use it. So I inastalled it and tried by plugging the devices but S4v device is not detected when the ADB Devices command given. I tried using S duos 2 and detects fine. Im so confused with this. Also didnt the part mannually updating drivers from Android SDK Manager.
Thank You again for the Help!
Click to expand...
Click to collapse
Mate
i am agree with dheeraj you must be doing wrong the 3 button combination if you can enter recovery you should be able to enter download mode
https://www.youtube.com/watch?v=9qh4z4JWLpI
MAX 404 said:
Mate
i am agree with dheeraj you must be doing wrong the 3 button combination if you can enter recovery you should be able to enter download mode
Click to expand...
Click to collapse
Im so sure I have tried the correct combination I double check using the internet too . I have installed custom roms many times using download mode in other phones but this device is not responding! Only the recovery mode is working! I cant get into fastboot also...
miraclevisions said:
Im so sure I have tried the correct combination I double check using the internet too . I have installed custom roms many times using download mode in other phones but this device is not responding! Only the recovery mode is working! I cant get into fastboot also...
Click to expand...
Click to collapse
You can always use a recovery to get into the download mode.
Flash Stock rom..
Root your phone
Download quickboot from the play store/Wanam xposed.(for activating 4 way boot menu...
Get into Download mode from there..
Doesn't this work??
Sent from my GT-I9500 using XDA Free mobile app
If you don't have downloade mode, then you probably got a clone.
miraclevisions said:
Im so sure I have tried the correct combination I double check using the internet too . I have installed custom roms many times using download mode in other phones but this device is not responding! Only the recovery mode is working! I cant get into fastboot also...
Click to expand...
Click to collapse
Hi mate ,
If that is right and if what @Lennyz1988 said is not true you need a USB Jig or a Jtag to get into download mode
http://www.ebay.com/itm/Samsung-I93...-USB-JIG-JTAG-Dongle-Bootloader-/231241925386

HELP

hi guys how are you ?
i have a problem guys, i flashed stock rom of s5830i on my galaxy y and now i cant acces the recovery mod and the download because the screen is always white .. any solution please ?
You have two options
1 - go into download mode - although the screen is white carry on as if it was normal - so connect USB to pc press Vol up to start connection & hope odin finds a connection & then flash the correct stock rom
2 - if option 1 fails you will have to take it to a repair shop where they will use a jtag to flash the correct bootloader in order to get download mode working

[Q] How to unbrick galaxy grand prime without enabling usb debug?

Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
rajukhadka19782 said:
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
Click to expand...
Click to collapse
You must use ODIN
go to download mode then flash your rom
rajukhadka19782 said:
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
Click to expand...
Click to collapse
i have same problem after i install app from google play try to flash rom can,t find 1 that work
plz help.
you need to use odin to flash the stock firmware back going into download mode and for rom just visit - http://www.sammobile.com/ and download firmware from there just see you model and select you country and download latest stock rom and flash it or else tell me your model number and country i will provide you link
AmGaD-SaLaH said:
You must use ODIN
go to download mode then flash your rom
Click to expand...
Click to collapse
Thanks dude for the suggestion.
me 2
Me 2, I want to unbrick it how to download my firmware?
Galaxy Grand Prime SM-G530/H/DV is Not accepting ODIN connection
Galaxy Grand Prime SM-G530/H/DV
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
maq66 said:
Galaxy Grand Prime SM-G530/H/DV
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
Click to expand...
Click to collapse
Seems like the EFS partition is broken (IMEI Invalid)
If You don't have any backups done by custom recovery, well... You're probably done.
I am having a similar problem. After enabling KNOX, which I thought was just another antivirus, my phone rebooted, and just got stuck. It would go to the boot page, with the name, and then it would act like it was gonna go to my home screen, but the screen would go black and it would start over. I cleared the cache and factory wiped it, but still no luck. I didn't enable usb debugging, and from what I know there is no way to enable it. I need it to use odin to flash a rom and start over. any suggestions?
dineshjumani said:
you need to use odin to flash the stock firmware back going into download mode and for rom just visit - http://www.sammobile.com/ and download firmware from there just see you model and select you country and download latest stock rom and flash it or else tell me your model number and country i will provide you link
Click to expand...
Click to collapse
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
talvigi said:
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
Click to expand...
Click to collapse
I'm with the same problem! All solutions need to go to download or recovery mode, but I can't turn on my phone and Odin can't catch it! Please, could somebody help me?
Thanks!
lucas13garcia said:
I'm with the same problem! All solutions need to go to download or recovery mode, but I can't turn on my phone and Odin can't catch it! Please, could somebody help me?
Thanks!
Click to expand...
Click to collapse
Does your device start at all or not? if it starts tell me what do you see? Is the battery charged, anden have you tried Odin 1.87, and have you tired to flash repair firmware 4.4.4, please Try it and make sure to only flash BL file first.
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Does your device start at all or not? if it starts tell me what do you see? Is the battery charged, anden have you tried Odin 1.87, and have you tired to flash repair firmware 4.4.4, please Try it and make sure to only flash BL file first.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Hey, thank you for the help!
It starts and it doesn't! With the battery, after I try to turn on, it keeps blinking repeatedly and stops only if I remove the battery. And my issue with any fix that I try to flash is that the computer doesn't recognize, probably cuz the blinking blue light is just a random light and not the phone actually trying to turn on... so Odin, for example, doesn't catch any device!
Is there any way to make the computer recognize it? I already tried some usb drivers, but nothing so far... BTW, I have a windows 10.
Thanks!
lucas13garcia said:
Hey, thank you for the help!
It starts and it doesn't! With the battery, after I try to turn on, it keeps blinking repeatedly and stops only if I remove the battery. And my issue with any fix that I try to flash is that the computer doesn't recognize, probably cuz the blinking blue light is just a random light and not the phone actually trying to turn on... so Odin, for example, doesn't catch any device!
Is there any way to make the computer recognize it? I already tried some usb drivers, but nothing so far... BTW, I have a windows 10.
Thanks!
Click to expand...
Click to collapse
Well Windows 10 64bit has been creating problems for many many people in the forum and I have seen people running vm and win 7 for the best results. And something very important I must say is that, most of the new computers do have USB 2.0 ports but they are limited in number, so you should find one on ur PC, to us it specifically for phone tweaking softwares. I would suggest you find another PC or laptop around,
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
Click to expand...
Click to collapse
Without recovery or Download mode, you'll need to take it to someone with a black box or jtag.
If you can access a working phone of your same model, you can boot download mode from sd
http://forum.xda-developers.com/grand-prime/development/fix-g530-debrick-img-guide-to-make-t3422115
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
mrunank said:
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
Click to expand...
Click to collapse
What happens when you go to download mode?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
mrunank said:
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
Click to expand...
Click to collapse
Did you try wiping cache and what is your model?
waleeds1 said:
What happens when you go to download mode?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
Did you try wiping cache and what is your model?
Click to expand...
Click to collapse
My model is SM530H I cannot enter the recovery mode to wipe the cache . When I try to go into the recovery mode, samsung logo flashes and then the screen goes blank. Same thing happens when i try to normally switch on the phone
mrunank said:
My model is SM530H I cannot enter the recovery mode to wipe the cache . When I try to go into the recovery mode, samsung logo flashes and then the screen goes blank. Same thing happens when i try to normally switch on the phone
Click to expand...
Click to collapse
What about download mode? Btw it should not go to logo it should go to recovery after bootimage. You should hold down power home and volume down untill download mode comes or power home and volume up untill recovery menu comes

my young has a soft brick

hello xda people
how are you?
i have a galaxy y s5360
my home button doesn't work
it stuck on recovery and not detected by adb
it wont go to download mode but odin detected my phone in recovery mode but gives me fail
is there is any way to fix my phone
I believe this thread should be in the Help & Troubleshooting subforum:
http://forum.xda-developers.com/galaxy-y/help
fgazzawie said:
hello xda people
how are you?
i have a galaxy y s5360
my home button doesn't work
it stuck on recovery and not detected by adb
it wont go to download mode but odin detected my phone in recovery mode but gives me fail
is there is any way to fix my phone
Click to expand...
Click to collapse
Put your phone into download mode using a USB jig
You will have to buy one
You can then flash stock rom via odin
marcussmith2626 said:
Put your phone into download mode using a USB jig
You will have to buy one
You can then flash stock rom via odin
Click to expand...
Click to collapse
thank you for your advice i managed to fix home button and i fixed my phone :fingers-crossed:

Categories

Resources