Related
I tried to flash the Baltic ROM with odin 3.07. I didn't find a way to change CSC (so KIES can recognize it) and i tried to go back to 4.3 EUR. But:
Odin failed (Checking MD5 finished Sucessfully..... Leave CS..... FAIL!) and now when i open the phone there is the following message :Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. KIES 3 says the connected device is not supported. I tried flashing the stock rom with ODIN (even tried 3.09) again but it failed. what can i do to recover my phone?
Thanks for any answers
tetra82 said:
I tried to flash the Baltic ROM with odin 3.07. I didn't find a way to change CSC (so KIES can recognize it) and i tried to go back to 4.3 EUR. But:
Odin failed (Checking MD5 finished Sucessfully..... Leave CS..... FAIL!) and now when i open the phone there is the following message :Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. KIES 3 says the connected device is not supported. I tried flashing the stock rom with ODIN (even tried 3.09) again but it failed. what can i do to recover my phone?
Thanks for any answers
Click to expand...
Click to collapse
Force Download Mode and flash one Custom Recovery. I think the Note 3 reboot from Recovery and Rom work. Try this...
But the Baltic Rom is KitKat 4.4.2?
tetra82 said:
I tried to flash the Baltic ROM with odin 3.07. I didn't find a way to change CSC (so KIES can recognize it) and i tried to go back to 4.3 EUR. But:
Odin failed (Checking MD5 finished Sucessfully..... Leave CS..... FAIL!) and now when i open the phone there is the following message :Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. KIES 3 says the connected device is not supported. I tried flashing the stock rom with ODIN (even tried 3.09) again but it failed. what can i do to recover my phone?
Thanks for any answers
Click to expand...
Click to collapse
if you flashed kitkat you cant go back to 4.3
thx for the quick replies guys. Since there is no way to go back to 4.3 is there a way to change the CSC so KIES can recognize the device? already tried CSC Select and the dialer code but no luck
tetra82 said:
thx for the quick replies guys. Since there is no way to go back to 4.3 is there a way to change the CSC so KIES can recognize the device? already tried CSC Select and the dialer code but no luck
Click to expand...
Click to collapse
The better for me is a new CLEAN install. On Customer Recovery wipe data+cache+dalvik and format system on mount and storage.
Whit recovery on screen force Download Mode and reflash the Rom. When You enter Your language at first boot, Your CSC is installed well (if the Rom have it on multi-csc).
I flashed the Poland Rom whit XEO, after first reboot I had my TPH well, automatically. What is Your CSC?
ValenteL said:
The better for me is a new CLEAN install. On Customer Recovery wipe data+cache+dalvik and format system on mount and storage.
Whit recovery on screen force Download Mode and reflash the Rom. When You enter Your language at first boot, Your CSC is installed well (if the Rom have it on multi-csc).
I flashed the Poland Rom whit XEO, after first reboot I had my TPH well, automatically. What is Your CSC?
Click to expand...
Click to collapse
OK sorry for late reply but i had a problem with my connection. I tried a different rom this time (polish) and at the same time i did what you said (full wipe etc. Worked like a charm. Device is faster thn ever and kies recognizes it again. Thanks a lot to everyone
Hi,
I have an international Samsung Galaxy S4 I9500, that is bricked after an error wihle updating from 4.2 to 4.3
I tried to flash an official 4.3 rom from odin, but no result
my phone stops on boot on the Samsung galaxy S4 screen, i can't access recovery mode, i can access only download mode ,
product name: gt-i9500
current binary: samsung official
system status : custom
waranty bit: 0
that's what the phone is displaying in download mode
Help please
Thanks
mihawk213 said:
Hi,
I have an international Samsung Galaxy S4 I9500, that is bricked after an error wihle updating from 4.2 to 4.3
I tried to flash an official 4.3 rom from odin, but no result
my phone stops on boot on the Samsung galaxy S4 screen, i can't access recovery mode, i can access only download mode ,
product name: gt-i9500
current binary: samsung official
system status : custom
waranty bit: 0
that's what the phone is displaying in download mode
Help please
Thanks
Click to expand...
Click to collapse
that's just a soft brick...
If u have orignal bill and have not rooted the phone before,go to a Samsung care and have it fixed.
Dont mess with it anymore,u may trip Knox,resulting in warranty void
edit:wait,u have custom system status,download a 4.4.2 for ur region and flash it
anu.cool said:
that's just a soft brick...
If u have orignal bill and have not rooted the phone before,go to a Samsung care and have it fixed.
Dont mess with it anymore,u may trip Knox,resulting in warranty void
edit:wait,u have custom system status,download a 4.4.2 for ur region and flash it
Click to expand...
Click to collapse
i tried to flash stock I9500XXUEMJ8 4.3, and id didn't work, same result, no recovery mode, and phone blocked on the boot screen "samsung galaxy s4 gt i9500
i'm not sure this is the right firware, is there a way to find wich firmware to flash ?
thanks
mihawk213 said:
i tried to flash stock I9500XXUEMJ8 4.3, and id didn't work, same result, no recovery mode, and phone blocked on the boot screen "samsung galaxy s4 gt i9500
i'm not sure this is the right firware, is there a way to find wich firmware to flash ?
thanks
Click to expand...
Click to collapse
check on sammobile,they have info on every fw released
Sent from my GT-I9500
I tried to flash a 4.2.2 fw downloaded from sammobile, failed at system.img
now my smartphone didn't turn on, didn't enter download mode,
it get's only on when i plug it to the pc usb and displays ""firmware upgrade encountred an issue, please select recovery mode in Kies & Try again"
the phone is always recognized by odin, so i tried to flash the 4.3 with repartition with a pit file, but failed on system.img,
PLEASE HELP :crying:
mihawk213 said:
I tried to flash a 4.2.2 fw downloaded from sammobile, failed at system.img
now my smartphone didn't turn on, didn't enter download mode,
it get's only on when i plug it to the pc usb and displays ""firmware upgrade encountred an issue, please select recovery mode in Kies & Try again"
the phone is always recognized by odin, so i tried to flash the 4.3 with repartition with a pit file, but failed on system.img,
PLEASE HELP :crying:
Click to expand...
Click to collapse
What version of Odin are you using? Try 3.09
Paolonicus said:
What version of Odin are you using? Try 3.09
Click to expand...
Click to collapse
Tried with odin 3.07 and 3.09, same result, failed at system.img
mihawk213 said:
Tried with odin 3.07 and 3.09, same result, failed at system.img
Click to expand...
Click to collapse
1. Uninstall completely the Samsung drivers.
2. Download and install THIS ones.
3. Try with other USB port to flash the firmware 4.4.2 again.
4. Good luck :highfive:
Joku1981 said:
1. Uninstall completely the Samsung drivers.
2. Download and install this ones.
3. Try with other USB port to flash the firmware 4.4.2 again.
4. Good luck :highfive:
Click to expand...
Click to collapse
dosn't work (ps: there is only 4.3 for my region (Algeria))
also tried with these drivers on another computer, still doe'snt work, blocked on system.img
is that the end of my s4 ?
mihawk213 said:
dosn't work (ps: there is only 4.3 for my region (Algeria))
also tried with these drivers on another computer, still doe'snt work, blocked on system.img
is that the end of my s4 ?
Click to expand...
Click to collapse
Make an screenshot of the problem of ODIN
Francisco momorei
Joku1981 said:
Make an screenshot of the problem of ODIN
Click to expand...
Click to collapse
here is the odin screenshot :
and here is a screenshot of what my phone is displaying :
nb: the phone doesn't turn one when i press the power button, it displays this screen only when it's plugged to the pc via usb
1. Close Odin completely
2. Open Odin again
3. Untick Re-partition and tick Autoreboot
4. Dont use .PIT file
5. Flash again same firmware
6. We gona see how it works :fingers-crossed:
7. If appears some error more... paste it here
Joku1981 said:
1. Close Odin completely
2. Open Odin again
3. Untick Re-partition and tick Autoreboot
4. Dont use .PIT file
5. Flash again same firmware
6. We gona see how it works :fingers-crossed:
7. If appears some error more... paste it here
Click to expand...
Click to collapse
Done it, always the same error, fail at system.img
mihawk213 said:
Done it, always the same error, fail at system.img
Click to expand...
Click to collapse
Did u wipe all before?
* EDIT: If the stock recovery dont work, flash a custom one in Downloade Mode by Odin for ur device. Wipe all there and flash the firmware in the way i was telling ya
Joku1981 said:
Did u wipe all before?
* EDIT: If the stock recovery dont work, flash a custom one in Downloade Mode by Odin for ur device. Wipe all there and flash the firmware in the way i was telling ya
Click to expand...
Click to collapse
if you mean by wipe , wipe cache, data, the phone wasn't able to enter recovery mode, so i didn't wipe
if you mean a nand erase while flashing, also i didn't it
but, the i flashed it with a 4.2 after trying a 4.3, that how i wasn't able to access download mode
thanks
I flashed CWM recovery successfully, and surprise, the phone turns on when i press the power button, but 2nd surprise, it blocks on a bootloop, and i can't access recovery mode ???
after that i flashed the stock firmware, and 3rd surprise, it passed, but the phone still blocked at a bootloop, and i can't access recovery
this phone is gonna make me crazy
mihawk213 said:
I flashed CWM recovery successfully, and surprise, the phone turns on when i press the power button, but 2nd surprise, it blocks on a bootloop, and i can't access recovery mode ???
after that i flashed the stock firmware, and 3rd surprise, it passed, but the phone still blocked at a bootloop, and i can't access recovery
this phone is gonna make me crazy
Click to expand...
Click to collapse
I presume u can't get into recovery mode,right?
If u can enter download mode,use Odin again,flash 4.2.2 of another region,it may work...
Sent from my GT-I9500
anu.cool said:
I presume u can't get into recovery mode,right?
If u can enter download mode,use Odin again,flash 4.2.2 of another region,it may work...
Sent from my GT-I9500
Click to expand...
Click to collapse
just to be sure, the last firmware i'd flashed was a 4.3, may i flash a 4.2.2 of another region or a 4.3 of another region ?
mihawk213 said:
just to be sure, the last firmware i'd flashed was a 4.3, may i flash a 4.2.2 of another region or a 4.3 of another region ?
Click to expand...
Click to collapse
are u worried abt ur warranty?
coz if u flashed stock 4.3 then knox was installed too ..
and with knox tripped, u loose ur warranty ..
If u don't care abt that, wipe clean everything then flash any rom, it will do fine..
anu.cool said:
are u worried abt ur warranty?
coz if u flashed stock 4.3 then knox was installed too ..
and with knox tripped, u loose ur warranty ..
If u don't care abt that, wipe clean everything then flash any rom, it will do fine..
Click to expand...
Click to collapse
i don't care about warranty, i flashed cwm recovery so the warranty is lost
you said that i must wipe clean everything, how to ? i haven't access to recovery mode !
Hello guys,
I need your help again!
I recently changed my i9100g with this other device, GT-I9505 Italian version, no brand.
The history of this device was quite this: stock FW until 4.3 (just my suppose) --> CM11 --> try to flash 4.2.2 stock --> brick @[email protected]
Now I tried to put the original 4.4.2 firmware by flashing with Odin v3.09, because I don't want custom rom for the moment, just make it work.
The problem is that the phone stucks at Samsung logo, and when I tried to go in recovery mode, it stays on the same logo but there's a blue write in the top left corner "Recovery Booting".
Do you have any suggestion?
TY in advance
Drake9090 said:
Hello guys,
I need your help again!
I recently changed my i9100g with this other device, GT-I9505 Italian version, no brand.
The history of this device was quite this: stock FW until 4.3 (just my suppose) --> CM11 --> try to flash 4.2.2 stock --> brick @[email protected]
Now I tried to put the original 4.4.2 firmware by flashing with Odin v3.09, because I don't want custom rom for the moment, just make it work.
The problem is that the phone stucks at Samsung logo, and when I tried to go in recovery mode, it stays on the same logo but there's a blue write in the top left corner "Recovery Booting".
Do you have any suggestion?
TY in advance
Click to expand...
Click to collapse
Flash the stock rom again..and do NOT check autoreboot in odin.
The straight away boot into recovery, factory reset it..and you'll boot
"If someone helps, never forget to hit thanks ? "
DeepankarS said:
Flash the stock rom again..and do NOT check autoreboot in odin.
The straight away boot into recovery, factory reset it..and you'll boot
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
Thank you very much for your reply!
It doesn't work, maybe I'm just doing something wrong, what should I have to do after flash?
Drake9090 said:
Thank you very much for your reply!
It doesn't work, maybe I'm just doing something wrong, what should I have to do after flash?
Click to expand...
Click to collapse
-Open odin
-Uncheck autoreboot
-Add your firmware file to the AP/PDA section
-Start the process
When this will end, your ohone wont boot automatically (obviously)
After 2-3 minutes start it, if it turns on properly congo..
If it doesnt..just boot into recovery (volume up+home button+power button) and perform a data wipe.
If this does not helo at all, download the LATEST KITKAT 4.4.2 UNBRANDED again for your phone as it can be a bad download issue too.
"If someone helps, never forget to hit thanks ? "
DeepankarS said:
-Open odin
-Uncheck autoreboot
-Add your firmware file to the AP/PDA section
-Start the process
When this will end, your ohone wont boot automatically (obviously)
After 2-3 minutes start it, if it turns on properly congo..
If it doesnt..just boot into recovery (volume up+home button+power button) and perform a data wipe.
If this does not helo at all, download the LATEST KITKAT 4.4.2 UNBRANDED again for your phone as it can be a bad download issue too.
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
I would try another firmware less recent, just to see what happens...
But I have great news: Philz touch works, so now I have a working custom recovery!
the problem is that I can't just flash a custom ROM to repair
I think I need the pit file, but I can't find one on the internet @[email protected]
Drake9090 said:
I would try another firmware less recent, just to see what happens...
But I have great news: Philz touch works, so now I have a working custom recovery!
the problem is that I can't just flash a custom ROM to repair
I think I need the pit file, but I can't find one on the internet @[email protected]
Click to expand...
Click to collapse
Y do you need a pit? Pit files are not to be played with and can possibly brick if not flashed with utmost care.
Try a stock firmware first. Dont try any stock firmware till you have a working phone..
"If someone helps, never forget to hit thanks ? "
DeepankarS said:
Y do you need a pit? Pit files are not to be played with and can possibly brick if not flashed with utmost care.
Try a stock firmware first. Dont try any stock firmware till you have a working phone..
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
I'm flashing this firmware: I9505XXUGNG8_I9505ITVGNG1_ITV
I was thinking about pit because the philz says strange errors:
failed to mount /data to setup /data/media, or something like this... and also other problems related to /sdcard
Have you an idea on what to do?
I'm just following this guide: http://forum.xda-developers.com/showthread.php?t=2265477
Drake9090 said:
I'm flashing this firmware: I9505XXUGNG8_I9505ITVGNG1_ITV
I was thinking about pit because the philz says strange errors:
failed to mount /data to setup /data/media, or something like this... and also other problems related to /sdcard
Have you an idea on what to do?
I'm just following this guide: http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
The pit file is right there in @samersh72s thread
In the attachments.
Flash properly after reading the OP very carefully and DO NOT SKIP ANY STEP OR MODIFY any
Still IMHO a data wipe after reflashing can fix your bootloop.
"If someone helps, never forget to hit thanks ? "
DeepankarS said:
The pit file is right there in @samersh72s thread
In the attachments.
Flash properly after reading the OP very carefully and DO NOT SKIP ANY STEP OR MODIFY any
Still IMHO a data wipe after reflashing can fix your bootloop.
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
I thought the same way too, but didn't work...
The attachment doesn't work, but some posts later there is one working
I'll try and let you know the results!
Stll locked here...
Used yhe pit file, but nothing changed
in Philz Touch 6 with CWM 6.0.4.7 I have this error:
E: could not mount /data to setup /data/media path!
Have you ever faced it?
Drake9090 said:
Used yhe pit file, but nothing changed
in Philz Touch 6 with CWM 6.0.4.7 I have this error:
E: could not mount /data to setup /data/media path!
Have you ever faced it?
Click to expand...
Click to collapse
Ermm no...
@Lennyz1988 @MAX 404
Help?
Sent from my GT-I9500 using XDA Free mobile app
I was thinking about a possible cause: could it be that I'm using a wrong firmware?
this device is used, so I supposed that it was ITV the correct firmware, but not 100% sure...
I'm just sure that it is no-brand.
Drake9090 said:
I was thinking about a possible cause: could it be that I'm using a wrong firmware?
this device is used, so I supposed that it was ITV the correct firmware, but not 100% sure...
I'm just sure that it is no-brand.
Click to expand...
Click to collapse
Screenshots of "phone info samsung" app please.
"If someone helps, never forget to hit thanks ?"
When you flash the Odin firmware it's succesfull?
DeepankarS said:
Screenshots of "phone info samsung" app please.
"If someone helps, never forget to hit thanks ?"
Click to expand...
Click to collapse
The only info that I'm able to see are the ones in download mode...
If the phone don't boot any firmware, how can I use that app?
Lennyz1988 said:
When you flash the Odin firmware it's succesfull?
Click to expand...
Click to collapse
Yes, or better to say, Odin says PASS, but when I reboot (even with or without Auto-Reboot flag) the phone stucks on Samsung Logo saying Recovery Booting.
DeepankarS said:
The pit file is right there in @samersh72s thread
In the attachments.
Flash properly after reading the OP very carefully and DO NOT SKIP ANY STEP OR MODIFY any
Still IMHO a data wipe after reflashing can fix your bootloop.
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
Drake9090 said:
Yes, or better to say, Odin says PASS, but when I reboot (even with or without Auto-Reboot flag) the phone stucks on Samsung Logo saying Recovery Booting.
Click to expand...
Click to collapse
On top of all advice given here...
Can you boot at all? what is the status at the moment , rom recovery?
I would try to flash a recovery first ( twrp , philz) see if it works , do a factory reset ( backup first) and try flashing a stock rom,,see if it helps
MAX 404 said:
On top of all advice given here...
Can you boot at all? what is the status at the moment , rom recovery?
I would try to flash a recovery first ( twrp , philz) see if it works , do a factory reset ( backup first) and try flashing a stock rom,,see if it helps
Click to expand...
Click to collapse
The situation is still the same, so in order:
I cannot boot a complete system, I just stuck on samsung i9505 logo with blue "Recovery Booting" written in top-left on the screen;
At the moment I'm reflashing ossessively the stock rom, and philz touch; I can go in DL mode and not in the stock recovery, but when I flash philz touch I can enter by double clicking vol up when I see the blue, red and yellow writes.
I cannot do a factory reset, that is the real problem I suppose, 'cause when I enter in philz recovery, it says: "error mount /data etc etc..." as you can see in previous posts.
In DL mode this is the situation:
PN: GT-I9505
Current binary: Samsung Official
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
csb-config-lsb: 0x30
write prot: enabled
eMMC Burst mode enabled
Drake9090 said:
The situation is still the same, so in order:
I cannot boot a complete system, I just stuck on samsung i9505 logo with blue "Recovery Booting" written in top-left on the screen;
At the moment I'm reflashing ossessively the stock rom, and philz touch; I can go in DL mode and not in the stock recovery, but when I flash philz touch I can enter by double clicking vol up when I see the blue, red and yellow writes.
I cannot do a factory reset, that is the real problem I suppose, 'cause when I enter in philz recovery, it says: "error mount /data etc etc..." as you can see in previous posts.
In DL mode this is the situation:
PN: GT-I9505
Current binary: Samsung Official
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
csb-config-lsb: 0x30
write prot: enabled
eMMC Burst mode enabled
Click to expand...
Click to collapse
Lets go one step at the time.........forget about recovery for now
Flashing with Odin a stock rom ( use same rom you had before or newer) , what happen? did you followed the guide
http://forum.xda-developers.com/show....php?t=2265477 that @DeepankarS suggested ? did you flash the PIT file?
MAX 404 said:
Lets go one step at the time.........forget about recovery for now
Flashing with Odin a stock rom ( use same rom you had before or newer) , what happen? did you followed the guide
http://forum.xda-developers.com/show....php?t=2265477 that @DeepankarS suggested ? did you flash the PIT file?
Click to expand...
Click to collapse
Followed that guide many times, but the result is stuck in Samsung Logo.
Even tried flashing PIT file, but nothing changed.
maybe flash just a stock recovery after the firmware could solve the problem?
Dear xda users,
I have a big problem with my Samsung S7 Edge G935F!
Yesterday my phone restarts continuously so I used Odin to flash Firmware Stock. First, I used this Firmware: http://forum.xda-developers.com/s7-edge/how-to/official-stock-firmware-update-odin-t3335065 .
Odin doesn't show any errors and my phone restarts; but after Samsung S7 Edge Boot Splash Screen, the phone shows a screen with yellow triangle and Android dead and then, phone restarts in Stock Recovery Mode.
In the Recovery mode when I press Reboot System Now or PowerOff, appears "Verifying DMVerity Hash Tree..." and then "Failed" and my phone restarts again in Recovery.
I tried Wipe data and cache but Nothing!
Then I tried to repair firmware with Kies 3: No errors but my phone won't boot!!
And then I tried another firmware file with Odin but nothing!
The phone is Completely Stock! Recovery Mode and Download Mode work and the phone is recognised by PC.
Please help me!
Thanks in advance
Sorry for my english
re: firmware issues
adc.droid said:
Dear xda users,
I have a big problem with my Samsung S7 Edge G935F!
Yesterday my phone restarts continuously so I used Odin to flash Firmware Stock. First, I used this Firmware: http://forum.xda-developers.com/s7-edge/how-to/official-stock-firmware-update-odin-t3335065 .
Odin doesn't show any errors and my phone restarts; but after Samsung S7 Edge Boot Splash Screen, the phone shows a screen with yellow triangle and Android dead and then, phone restarts in Stock Recovery Mode.
In the Recovery mode when I press Reboot System Now or PowerOff, appears "Verifying DMVerity Hash Tree..." and then "Failed" and my phone restarts again in Recovery.
I tried Wipe data and cache but Nothing!
Then I tried to repair firmware with Kies 3: No errors but my phone won't boot!!
And then I tried another firmware file with Odin but nothing!
The phone is Completely Stock! Recovery Mode and Download Mode work and the phone is recognised by PC.
Please help me!
Thanks in advance
Sorry for my english
Click to expand...
Click to collapse
Have you tried doing a "Factory Data Reset" in stock recovery yet?
If not, do that before doing anything else.
The Factory Data Reset in stock recovery will WIPE your internal
sdcard but it will not wipe your external SD if you have one.
Also it would be very helpful to know the exact filename(s) of the
stock firmware(s) which you have tried to odin flash and what the
model of your phone is. (G938F) or other variant?)
Good luck and have a great day!
Misterjunky said:
Have you tried doing a "Factory Data Reset" in stock recovery yet?
If not, do that before doing anything else.
The Factory Data Reset in stock recovery will WIPE your internal
sdcard but it will not wipe your external SD if you have one.
Also it would be very helpful to know the exact filename(s) of the
stock firmware(s) which you have tried to odin flash and what the
model of your phone is. (G938F) or other variant?)
Good luck and have a great day!
Click to expand...
Click to collapse
Thanks for your reply!
Yes I tried Wiped data/Factory Reset and Wipe cache partition in Stock Recovery..
Device: Samsung Galaxy S7 Edge
Model: SM-G935F
Firmwares tha I tried to flash with Odin:
Netherlands (Android 6.0.1) G935FXXU1APF2_G935FPHN1APE2_G935FXXU1APEQ_PHN
Italy (Android 6.0.1) G935FXXU1APF2_G935FITV1APE2_ITV
If flashing succeeds, and you still have the same problem:
go back with your device where you bought it
You can't solve it yourself, and probably something is wrong/defect with the main-board
When you 1st discovered the continuous reboot:
1. why did you not go to the store where you bought your phone?
2. why trying to flash "other firmware" on your phone instead of your "original firmware"?
What's your original CSC? Flash your phone with your original phone's CSC and bring your phone back for repair and/or replacement!
re: Odin flashing
adc.droid said:
Thanks for your reply!
Yes I tried Wiped data/Factory Reset and Wipe cache partition in Stock Recovery..
Device: Samsung Galaxy S7 Edge
Model: SM-G935F
Firmwares tha I tried to flash with Odin:
Netherlands (Android 6.0.1) G935FXXU1APF2_G935FPHN1APE2_G935FXXU1APEQ_PHN
Italy (Android 6.0.1) G935FXXU1APF2_G935FITV1APE2_ITV
Click to expand...
Click to collapse
Are you using the latest version of Odin3?
The latest version is "3.11.1" if not here
is the download link for it, give it a try:
https://www.androidfilehost.com/?fid=24572369242686812
Good luck,
Have a great day!
henklbr said:
If flashing succeeds, and you still have the same problem:
go back with your device where you bought it
You can't solve it yourself, and probably something is wrong/defect with the main-board
When you 1st discovered the continuous reboot:
1. why did you not go to the store where you bought your phone?
2. why trying to flash "other firmware" on your phone instead of your "original firmware"?
What's your original CSC? Flash your phone with your original phone's CSC and bring your phone back for repair and/or replacement!
Click to expand...
Click to collapse
In attacchments there are images of Recovery Mode.
I don't know CSC because phone won't boot to see the code.. Kies says that CSC code is PE2
I can not do anything.. right?
Misterjunky said:
Are you using the latest version of Odin3?
The latest version is "3.11.1" if not here
is the download link for it, give it a try:
https://www.androidfilehost.com/?fid=24572369242686812
Good luck,
Have a great day!
Click to expand...
Click to collapse
Yes, I did. I tried Odin v3.10.7 and v3.11.1
adc.droid said:
Yes, I did. I tried Odin v3.10.7 and v3.11.1
Click to expand...
Click to collapse
you could try samsung smartswitch for pc.If it works cool but if that does not work i suggest taking it back.
jdoggawesomex900 said:
you could try samsung smartswitch for pc.If it works cool but if that does not work i suggest taking it back.
Click to expand...
Click to collapse
I tried with Kies3 but the problem remains.. I think with Smartswitch is the same thing because the file and the installation procedure is identical.. I don't know
adc.droid said:
I tried with Kies3 but the problem remains.. I think with Smartswitch is the same thing because the file and the installation procedure is identical.. I don't know
Click to expand...
Click to collapse
But smartswitch is newer and supports most samsung devices 5.0 and up.Kies is not meant for anything higher than kitkat.
jdoggawesomex900 said:
But smartswitch is newer and supports most samsung devices 5.0 and up.Kies is not meant for anything higher than kitkat.
Click to expand...
Click to collapse
So I'll try with SmartSwitch..
hey guys,
first of all: S5 was not rooted and I did never flash a custom rom on this phone
a few days ago my S5 hang up and then rebooted.. it then stucks at the bootloader ("Set Warranty Bit : kernel").. I tried entering the recovery, but it doesn't work..
I tried to flash the recent stock rom (6.0.1) using download mode and Odin 3.12 and managed somehow to get to the recovery (couldn't boot android).. I wiped data and cache but that doesn't help either..
I tried flashing
- 6.0.1 (stock)
- 5.0 (stock)
- CWM recovery
- Bootloader and Modem
after flashing the rom it stucks at "Set Warranty Bit : recovery", after flashing bootloader and modem at "Set Warranty Bit : kernel" again..
thanks for your help..
stefan9310 said:
hey guys,
first of all: S5 was not rooted and I did never flash a custom rom on this phone
a few days ago my S5 hang up and then rebooted.. it then stucks at the bootloader ("Set Warranty Bit : kernel").. I tried entering the recovery, but it doesn't work..
I tried to flash the recent stock rom (6.0.1) using download mode and Odin 3.12 and managed somehow to get to the recovery (couldn't boot android).. I wiped data and cache but that doesn't help either..
I tried flashing
- 6.0.1 (stock)
- 5.0 (stock)
- CWM recovery
- Bootloader and Modem
after flashing the rom it stucks at "Set Warranty Bit : recovery", after flashing bootloader and modem at "Set Warranty Bit : kernel" again..
thanks for your help..
Click to expand...
Click to collapse
Try to reinstall the firmware using samsung smart switch
KillersEnergy said:
Try to reinstall the firmware using samsung smart switch
Click to expand...
Click to collapse
that doesn't work for me still getting "Set Warranty Bit : recovery"..
stefan9310 said:
that doesn't work for me still getting "Set Warranty Bit : recovery"..
Click to expand...
Click to collapse
Download the firmware from fw.updato.com(IMHO is better than sammobile because you can download firmware without speed cap) then extract boot.img and recovery.img from the firmware archive (tar.md5) that you have downloaded and using 7zip make a .tar archive with those file and flash the tar with odin
KillersEnergy said:
Download the firmware from fw.updato.com(IMHO is better than sammobile because you can download firmware without speed cap) then extract boot.img and recovery.img from the firmware archive (tar.md5) that you have downloaded and using 7zip make a .tar archive with those file and flash the tar with odin
Click to expand...
Click to collapse
doesn't work too still getting the same messages.. S5 tries now to boot rom on startup ("...kernel") again and when I try to boot the recovery, I still get "...recovery"..
stefan9310 said:
doesn't work too still getting the same messages.. S5 tries now to boot rom on startup ("...kernel") again and when I try to boot the recovery, I still get "...recovery"..
Click to expand...
Click to collapse
Are you sure that you are downloading the right firmware? What model do you have?
KillersEnergy said:
Are you sure that you are downloading the right firmware? What model do you have?
Click to expand...
Click to collapse
yes, pretty sure.. SM-G900F, as it was written in the title.. I used this one from here..
stefan9310 said:
yes, pretty sure.. SM-G900F, as it was written in the title.. I used this one from here..
Click to expand...
Click to collapse
So smart switch and firmware restore didn't work...the last thing you could try is that method but IT WILL ERASE ALL YOUR DATA exept external-sdcard but pull it out of the phone to be sure,if you have one...
So the method is:
1)Download samfirm from here: http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
2)Config it like that: Region= DBT,Model=SM-G900F,check this option: auto,binary nature,check CRC32 and decrypt automatically
3)extract the firmware from the zip in a folder and you should have 4 tar.md5 archives: BL,AP,CP,CSC (with their infos)
4)Download the latest version of odin (3.12.3 as of now) from here http://forum.xda-developers.com/showthread.php?t=2711451,open it and control that Auto-Reboot and F. Reset Time are checked and be sure that Re-Partition is NOT checked put the archives in their right place and flash the phone
5)If the phone doesn't boot,pull the battery for 20 sec and reboot in recovery then wipe data and cache
KillersEnergy said:
So smart switch and firmware restore didn't work...the last thing you could try is that method but IT WILL ERASE ALL YOUR DATA exept external-sdcard but pull it out of the phone to be sure,if you have one...
So the method is:
1)Download samfirm from here: http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
2)Config it like that: Region= DBT,Model=SM-G900F,check this option: auto,binary nature,check CRC32 and decrypt automatically
3)extract the firmware from the zip in a folder and you should have 4 tar.md5 archives: BL,AP,CP,CSC (with their infos)
4)Download the latest version of odin (3.12.3 as of now) from here http://forum.xda-developers.com/showthread.php?t=2711451,open it and control that Auto-Reboot and F. Reset Time are checked and be sure that Re-Partition is NOT checked put the archives in their right place and flash the phone
5)If the phone doesn't boot,pull the battery for 20 sec and reboot in recovery then wipe data and cache
Click to expand...
Click to collapse
doesn't work again phone tries to boot to recovery instantly with the same error message ("Set Warranty Bit : recovery").. so I didn't manage to wipe data and cache (again)..
stefan9310 said:
doesn't work again phone tries to boot to recovery instantly with the same error message ("Set Warranty Bit : recovery").. so I didn't manage to wipe data and cache (again)..
Click to expand...
Click to collapse
Does it boot in stock recovery?
Go to download mode and check for:
Current Binary
System Status
Knox Warranty Void
KillersEnergy said:
Does it boot in stock recovery?
Go to download mode and check for:
Current Binary
System Status
Knox Warranty Void
Click to expand...
Click to collapse
No, stock recovery was flashed nearly the whole time.. CWM recovery only 5min to check whether it would help..
Current Binary: Custom
System Status: Custom
Knox Warranty Void: 0x1 (2)
stefan9310 said:
No, stock recovery was flashed nearly the whole time.. CWM recovery only 5min to check whether it would help..
Current Binary: Custom
System Status: Custom
Knox Warranty Void: 0x1 (2)
Click to expand...
Click to collapse
Are you really sure that you have a G900F lol,the possibility are 2
1)the bootloader keys are corrupted so every recovery get recognized as custom(that's quite impossible)
2)you have a different phone number
I think that's the 2 because a stock recovery signed by samsung can't get recognized as custom and after a complete firmware reinstallaton custom binary status should be "Samsung Official"...
Try to pull the battery and read the info at "Model"
KillersEnergy said:
Are you really sure that you have a G900F lol,the possibility are 2
1)the bootloader keys are corrupted so every recovery get recognized as custom(that's quite impossible)
2)you have a different phone number
I think that's the 2 because a stock recovery signed by samsung can't get recognized as custom and after a complete firmware reinstallaton custom binary status should be "Samsung Official"...
Try to pull the battery and read the info at "Model"
Click to expand...
Click to collapse
yeah I know.. I'm also a "bit" confused..
that's where I get the Model from.. SM-G900F.. 100% sure..
stefan9310 said:
yeah I know.. I'm also a "bit" confused..
that's where I get the Model from.. SM-G900F.. 100% sure..
Click to expand...
Click to collapse
Do your phone boot now?
If it doesn't then probably the eMMc is broken...
KillersEnergy said:
Does your phone boot now?
Click to expand...
Click to collapse
nope.. tries to boot recovery instantly on startup but fails.. looks like this.. stuck at this message
stefan9310 said:
nope.. tries to boot recovery instantly on startup but fails.. looks like this.. stuck at this message
Click to expand...
Click to collapse
It happen when you flash wrong boot.img(kernel) or/and system.img or a complete different firmware...try to download a casual custom kernel (for G900F) and flash it
---------- Post added at 05:11 PM ---------- Previous post was at 05:02 PM ----------
stefan9310 said:
yeah I know.. I'm also a "bit" confused..
that's where I get the Model from.. SM-G900F.. 100% sure..
Click to expand...
Click to collapse
The last things i could think will solve the problem is try to downgrade to lollipop or kitkat or try another marshmallow firmware...if that doesn't work your phone is broken and you have to take it to a samsung service center and hope they doe sn't refuse your warranty due to knox 0x1...if they notice that you could try to say that the recovery error tripped knox even if it's stock
P.s.: Is your phone refurbished?
KillersEnergy said:
It happen when you flash wrong boot.img(kernel) or/and system.img or a complete different firmware...try to download a casual custom kernel (for G900F) and flash it
---------- Post added at 05:11 PM ---------- Previous post was at 05:02 PM ----------
The last things i could think will solve the problem is try to downgrade to lollipop or kitkat or try another marshmallow firmware...if that doesn't work your phone is broken and you have to take it to a samsung service center and hope they doe sn't refuse your warranty due to knox 0x1...if they notice that you could try to say that the recovery error tripped knox even if it's stock
P.s.: Is your phone refurbished?
Click to expand...
Click to collapse
I just flashed this kernel but same result..
I tried to downgrade yesterday but it also doesn't fix the problem.. well warranty is over since august..
nope.. was a new one
stefan9310 said:
I just flashed this kernel but same result..
I tried to downgrade yesterday but it also doesn't fix the problem.. well warranty is over since august..
nope.. was a new one
Click to expand...
Click to collapse
1)flash twrp boot it and place a boot.img on sdcard then go to advanced->terminal and exec:
dd if=/sdcard/boot.img of=/dev/block/platform/msm_sdcc.1/by-name/boot
If it doesn't work
2)go to the folder where you have extracted samfirm firmware open the csc archive with 7zip and extract the .pit file in the same folder,then open odin place all the 4 file in the right place go to pit and place there the pit file you have extracted and this time CHECK the repartition flag if is not checked check it by yourself or the pit will not have any effect
KillersEnergy said:
1)flash twrp boot it and place a boot.img on sdcard then go to advanced->terminal and exec:
dd if=/sdcard/boot.img of=/dev/block/platform/msm_sdcc.1/by-name/boot
If it doesn't work
2)go to the folder where you have extracted samfirm firmware open the csc archive with 7zip and extract the .pit file in the same folder,then open odin place all the 4 file in the right place go to pit and place there the pit file you have extracted and this time CHECK the repartition flag if is not checked check it by yourself or the pit will not have any effect
Click to expand...
Click to collapse
1) can not boot to recovery again..
2) failed to boot to recovery after reboot.. removed battery and started again.. show up "Installing system update" and after that "Erasing" but still failed to boot (rom / recovery).. Still the same information in download mode (Custom, Custom, 0x1 (2))
stefan9310 said:
1) can not boot to recovery again..
2) failed to boot to recovery after reboot.. removed battery and started again.. show up "Installing system update" and after that "Erasing" but still failed to boot (rom / recovery).. Still the same information in download mode (Custom, Custom, 0x1 (2))
Click to expand...
Click to collapse
I'm sorry but if even the repartition doesn't work your phone is probably dead ,i think something in the motherboard(that would mean it's a hardware failure and not software problem and i think is unsolvable even with a jtag) like an eMMc partially broken and/or some printed circuit "burned" and/or other hardware part necessary to boot the recovery,kernel stopped working and that would explain:
1)why only download mode work(download mode is in sbl(secondary bootloader) partition that it's a part of the bootloader )
2)the bootloader behaviour("Set Warranty bit" even on stock partition)
3)and why none of the solutions worked
You could try to change the battery but i don't know if it will work...at least we tried