Hi,
I discovered some things that I wanna share with everyone.
First: appears to every Moto G ROM supports dual sim, with a simple build.prop change.
-> adding persist.multisim.config=dsds into build.prop (for JB roms), it will add another signal meter to status bar and if you have a dual sim radio it will work. (I tested with en.GB rom and it works fine - used dual sim on a 'single' sim rom)
Second: I tested a lot of kitkat roms and no one has dual sim implementation at all. If you put persist.radio.multisim.config=dsds (kitkat env. variable name is different), it will display two signal meters but no more changes inside rom and if you have enabled lockscreen, you will stuck there.
Third and last: I'm running on a dual sim version the en.gb retail without any changes to radio/rom and it works like a single sim rom.
I'm not responsible if you brick your phone, but everything I said is true.
=)
EDIT: After some tweaks on MODEM/framework booleans/props/apks I got dualsim working! o/ It's not my interest describe steps to archive it, but its possible.
Posso perguntar como fez para atualizar ao kitkat no modelo brasileiro dual-sim? Agradeço.
May I ask how did you update your brazilian dual-sim device to kitkat? Thanks.
With a unlocked bootloader, do:
- flashed Blur_Version.14.71.8.falcon_umts.Retail.en.GB
- installed ota.
We can go back installing Blur_Version.14.91.9.falcon_umtsds.Brasil.en.BR back.
ffosilva said:
With a unlocked bootloader, do:
- flashed Blur_Version.14.71.8.falcon_umts.Retail.en.GB
- installed ota.
We can go back installing Blur_Version.14.91.9.falcon_umtsds.Brasil.en.BR back.
Click to expand...
Click to collapse
Why not the US rom?
Doug385 said:
Why not the US rom?
Click to expand...
Click to collapse
Probably because of GSM and CDMA versions.
Thank you. Will try and report.
Wait, I took some time to understand, so GB ROM + KitKat OTA work flawless with our xt1033 only 1 sim support!?!? That's what I need! Since the second sim showing disconnected here is only bothering me.
Much love! s2
ffosilva said:
Hi,
I discovered some things that I wanna share with everyone.
First: appears to every Moto G ROM supports dual sim, with a simple build.prop change.
-> adding persist.multisim.config=dsds into build.prop (for JB roms), it will add another signal meter to status bar and if you have a dual sim radio it will work. (I tested with en.GB rom and it works fine - used dual sim on a 'single' sim rom)
Second: I tested a lot of kitkat roms and no one has dual sim implementation at all. If you put persist.radio.multisim.config=dsds (kitkat env. variable name is different), it will display two signal meters but no more changes inside rom and if you have enabled lockscreen, you will stuck there.
Third and last: I'm running on a dual sim version the en.gb retail without any changes to radio/rom and it works like a single sim rom.
I'm not responsible if you brick your phone, but everything I said is true.
=)
Click to expand...
Click to collapse
Confirmed to work fine. Thank you buddy.
It's a little big step about crossflashing and to add dual sim support. I tried to do this dangerous move because I'm in travel and bored hahahaha
Remember to flash back to Brazil manually due to installing updated (kitkat) gpt.bin it breaks the flashall.sh script due to a error. But I'm now on xt1033 ROM (due to my free internet of second Sim). After I get back to my city I'll try to add dualsim support to cm11 unofficially.
Sent from my XT1033 using Tapatalk
nirmalbalaji said:
Probably because of GSM and CDMA versions.
Click to expand...
Click to collapse
There three US versions. GSM XT1032, GSM XT1034 and CDMA. The US GSM XT1032 firmware can be flashed on a UK/EU XT1032 handset, so the US KK GSM XT1032 firmware image may also work.
It might be worth checking the effect of having the non-brazilian radio / modem firmware has on gsm coverage, data connection and wifi.
I tried US last week but without flashing radio. It may works. But I do prefer en.GB due to Portuguese availability.
Sent from my XT1033 using Tapatalk
So i can have kitkat on xt1033 dual sim with both sim's working?
Enviado de meu XT1033 usando Tapatalk
luan176 said:
So i can have kitkat on xt1033 dual sim with both sim's working?
Enviado de meu XT1033 usando Tapatalk
Click to expand...
Click to collapse
Not yet.
Sent from my XT1033 using Tapatalk
luan176 said:
So i can have kitkat on xt1033 dual sim with both sim's working?
Enviado de meu XT1033 usando Tapatalk
Click to expand...
Click to collapse
But at least one if the two chips on the dual sim version will work? SIM #1 I suppose...
Sent from my Galaxy Nexus using Tapatalk
SIM #1 to be more precise.
Sent from my XT1033 using Tapatalk
ffosilva said:
SIM #1 to be more precise.
Sent from my XT1033 using Tapatalk
Click to expand...
Click to collapse
You mean Technically we can run any rom on developement forum....just by flashing it and changing the build.prop?
And have one sim working?
You doesn't need to change build.prop. You need to change build.prop only if you wanna try dualsim implementation built in ROM (only works on Motorola stock roms). If you wanna try en.GB kitkat just flash it like flashing any other ROM.
Sent from my XT1033 using Tapatalk
ffosilva said:
It's a little big step about crossflashing and to add dual sim support. I tried to do this dangerous move because I'm in travel and bored hahahaha
Remember to flash back to Brazil manually due to installing updated (kitkat) gpt.bin it breaks the flashall.sh script due to a error. But I'm now on xt1033 ROM (due to my free internet of second Sim). After I get back to my city I'll try to add dualsim support to cm11 unofficially.
Sent from my XT1033 using Tapatalk
Click to expand...
Click to collapse
That would be awesome. Thanks! =D
Nice discovery buddy! But, I'm using the two chips now, it helps me to save money haha... I'll stay tunned here!
Thanks!
:good:
Added new screenshots. =)
ffosilva said:
It's a little big step about crossflashing and to add dual sim support. I tried to do this dangerous move because I'm in travel and bored hahahaha
Remember to flash back to Brazil manually due to installing updated (kitkat) gpt.bin it breaks the flashall.sh script due to a error. But I'm now on xt1033 ROM (due to my free internet of second Sim). After I get back to my city I'll try to add dualsim support to cm11 unofficially.
Sent from my XT1033 using Tapatalk
Click to expand...
Click to collapse
ffosilva
If you can make a zip file containing the modified files, we could fleshear after installing any Rom.
This way you solve the problem with all roms
Related
I have installed at least 2 different roms and still can't fix the dialer bug. The numbers are not recognized by any operator on calls, it just doesn't don't anything.
Does anyone know any solution or at least know how to come back to stock? Razr M unlocked bootloader
Enviado desde mi Droid Razr M
prosttyle said:
I have installed at least 2 different roms and still can't fix the dialer bug. The numbers are not recognized by any operator on calls, it just doesn't don't anything.
Does anyone know any solution or at least know how to come back to stock? Razr M unlocked bootloader
Enviado desde mi Droid Razr M
Click to expand...
Click to collapse
See below. Or use custom recovery to "go back".
aviwdoowks said:
See below. Or use custom recovery to "go back".
Click to expand...
Click to collapse
Thanks, maybe a last question, If i flash my phone Using RSD lite will it Sim lock for Verizon Only? Mine is a Sim unlocked (Verizon Native) version, i use the phone in SouthAmerica.
Sorry if it is a dumb question, but better be sure
prosttyle said:
Thanks, maybe a last question, If i flash my phone Using RSD lite will it Sim lock for Verizon Only? Mine is a Sim unlocked (Verizon Native) version, i use the phone in SouthAmerica.
Sorry if it is a dumb question, but better be sure
Click to expand...
Click to collapse
Not dumb! I get another about phone screen shot or info please? What xml did you flash? I am collecting those too.
So Am M sw!
I do not think I can advise at the moment.
aviwdoowks said:
Not dumb! I get another about phone screen shot or info please? What xml did you flash? I am collecting those too.
So Am M sw!
I do not think I can advise at the moment.
Click to expand...
Click to collapse
There is the about phone screenshot ,i havent flashed XML yet, im using slimrom.
I will flash the Full v6 version from your signature soon i was using the oficial vzw firmware before so i dont think there will be a problem
Enviado desde mi Droid RAZR M
prosttyle said:
There is the about phone screenshot ,i havent flashed XML yet, im using slimrom.
I will flash the Full v6 version from your signature soon i was using the oficial vzw firmware before so i dont think there will be a problem
Enviado desde mi Droid RAZR M
Click to expand...
Click to collapse
Any rsd xml will trash nv items in system. Is sim UL on the card or on the phone also?
aviwdoowks said:
Any rsd xml will trash nv items in system. Is sim UL on the card or on the phone also?
Click to expand...
Click to collapse
how can i check that? it came i with SIM UL and Verizon official firmware, then i UL'ed the BL and installed severals rom without losing SIM unlock, so i think it is ok
Do you have a contract with Verizon or do you use your phone outside US?
prosttyle said:
how can i check that? it came i with SIM UL and Verizon official firmware, then i UL'ed the BL and installed severals rom without losing SIM unlock, so i think it is ok
Do you have a contract with Verizon or do you use your phone outside US?
Click to expand...
Click to collapse
I am vzw contract.
Ask this op http://forum.xda-developers.com/showthread.php?t=2166542
What are the bands used for GSM by your carrier?
The phone is factory SIM unlocked, meaning that it will accept any SIM, but if the bands for your carrier are the same as US GSM, you need to use the method here: http://forum.xda-developers.com/showthread.php?t=2166542 to open up those bands...
Also, if you haven't already, you'll want to edit your build.prop for GSM use. I'm probably gonna write up a guide on how to do it here eventually so I have an easy link to point to.
Also, FWIW, you won't really get an improvement on stock if you're having connection problems. If anything, stock will lock you down more because Verizon is annoying...
sloosecannon said:
What are the bands used for GSM by your carrier?
The phone is factory SIM unlocked, meaning that it will accept any SIM, but if the bands for your carrier are the same as US GSM, you need to use the method here: http://forum.xda-developers.com/showthread.php?t=2166542 to open up those bands...
Also, if you haven't already, you'll want to edit your build.prop for GSM use. I'm probably gonna write up a guide on how to do it here eventually so I have an easy link to point to.
Also, FWIW, you won't really get an improvement on stock if you're having connection problems. If anything, stock will lock you down more because Verizon is annoying...
Click to expand...
Click to collapse
The GSM band used by my Carrier (Virgin Mobile Chile) is GSM 1900, also i've never edited build.prop since the last time i did for illusion ROM and it didnt work, giving me a softbrick.
The problem i'm having right now is the DialPad, it wont work at all in calls, in any Custom ROM i've installed so far... i dont know what am i doing wrong? since i dont see that bug very often over here
prosttyle said:
The GSM band used by my Carrier (Virgin Mobile Chile) is GSM 1900, also i've never edited build.prop since the last time i did for illusion ROM and it didnt work, giving me a softbrick.
The problem i'm having right now is the DialPad, it wont work at all in calls, in any Custom ROM i've installed so far... i dont know what am i doing wrong? since i dont see that bug very often over here
Click to expand...
Click to collapse
wait... what do you mean by dialpad?
Do you mean the dialpad that you can access in-call? Like to "press 1 to continue"?
There should be a button on the bottom-right to access that... just tap it and it will appear
sloosecannon said:
wait... what do you mean by dialpad?
Do you mean the dialpad that you can access in-call? Like to "press 1 to continue"?
There should be a button on the bottom-right to access that... just tap it and it will appear
Click to expand...
Click to collapse
haha yeah i know that, the thing is i can tap them all and nothing will happen, for example: press 1 to access your account ... then i press 1, and nothing... i can actually spam numbers and nothing, its like pressing nothing at all even when i cant literally have my screen full of numbers actually dialed.
I hope u can understand my explanation
aviwdoowks said:
I am vzw contract.
Ask this op http://forum.xda-developers.com/showthread.php?t=2166542
Click to expand...
Click to collapse
I flashed with RSDLite the XML Today Full version 6, and i got stuck on boot animation. What can i do now?
prosttyle said:
I flashed with RSDLite the XML Today Full version 6, and i got stuck on boot animation. What can i do now?
Click to expand...
Click to collapse
Did you wipe data before?
If so use keys to get to bootloader & select recovery.
Follow guide. You should be a happy face in the guide.
aviwdoowks said:
Did you wipe data before?
If so use keys to get to bootloader & select recovery.
Follow guide. You should be a happy face in the guide.
Click to expand...
Click to collapse
Omg, i didnt wipe data before, thought i didnt have to be cause of RSDLite, derp, my bad... i will come back with more news soon
EDIT: It worked, but the debloated ROm that you recommend on your post is not, fail when flashing
Just to end this thread, everything worked out just fine. Dial pad is working perfectly, I finally installed debloated stock rom with 0 issues, just enjoying now.
Also 0 signal problem.
Thanks for the help guys
Enviado desde mi XT907
prosttyle said:
Just to end this thread, everything worked out just fine. Dial pad is working perfectly, I finally installed debloated stock rom with 0 issues, just enjoying now.
Also 0 signal problem.
Thanks for the help guys
Enviado desde mi XT907
Click to expand...
Click to collapse
No problem, congratulations!
Sent from my XT907 using Tapatalk 4
If you have purchased an unlocked MOTO X from Ebay or elsewhere chances are it is from Latin America and is running a really old firmware, something like AmericanMovil.EN or similiar. If you want to be more up to date and have the best radios possible (for TMO anyway) you can download the SBF files from here http://sbf.droid-developers.org/ghost_rcica/list.php and flash in RSD lite after unlocking the bootloader through MOTOs bootloader unlock. I saw several threads discussing the possibility but no one who had actually done it. So happy flashing and enjoy your up to date firmware..
I only Tested T-Mobile but am pretty sure that AT&T would work as well, I am just a T-MO customer.
bradgog said:
If you have purchased an unlocked MOTO X from Ebay or elsewhere chances are it is from Latin America and is running a really old firmware, something like AmericanMovil.EN or similiar. If you want to be more up to date and have the best radios possible (for TMO anyway) you can download the SBF files from here http://sbf.droid-developers.org/ghost_rcica/list.php and flash in RSD lite after unlocking the bootloader through MOTOs bootloader unlock. I saw several threads discussing the possibility but no one who had actually done it. So happy flashing and enjoy your up to date firmware..
I only Tested T-Mobile but am pretty sure that AT&T would work as well, I am just a T-MO customer.
Click to expand...
Click to collapse
Can i flash only system and boot partition to preserve my radio?
Sorry my english
Enviado desde mi XT1058 usando Tapatalk
Cheerpipe said:
Can i flash only system and boot partition to preserve my radio?
Sorry my english
Enviado desde mi XT1058 usando Tapatalk
Click to expand...
Click to collapse
+1
i need the 2600hz band to use LTE
waiflih said:
+1
i need the 2600hz band to use LTE
Click to expand...
Click to collapse
Did u try?
Enviado desde mi XT1058 usando Tapatalk
Not until i'm sure i'm not gonna lose lte
Enviado desde mi XT1058 usando Tapatalk
Cheerpipe said:
Can i flash only system and boot partition to preserve my radio?
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=2477180
It will preserve you radio for sure.
Cheerpipe said:
Did u try?
Enviado desde mi XT1058 usando Tapatalk
Click to expand...
Click to collapse
I just flashed the ATT version, and OTA prompted after one reboot. I just had to search the apn settings for my carrier. LTE seem's to be working (4G icon appeared)
So the radio flashes and correct frequencies activate?
Sent from my LT30at using Tapatalk 4
waiflih said:
I just flashed the ATT version, and OTA prompted after one reboot. I just had to search the apn settings for my carrier. LTE seem's to be working (4G icon appeared)
Click to expand...
Click to collapse
How you flash the att version on xt1058 Latin America? what sbf you use?
juantechnologypr said:
How you flash the att version on xt1058 Latin America? what sbf you use?
Click to expand...
Click to collapse
I used ATT_XT1058_4.2.2-13.9.0Q2.X-116-X-17-51_CFC_1FF.xml.zip (unlocked bootloader)
waiflih said:
I used ATT_XT1058_4.2.2-13.9.0Q2.X-116-X-17-51_CFC_1FF.xml.zip (unlocked bootloader)
Click to expand...
Click to collapse
with rsd lite?
juantechnologypr said:
with rsd lite?
Click to expand...
Click to collapse
yeah!
In the flashing process the "sdcard" is erased, so save a backup in your computer before. And save your APNs
Apologies for the dumb question, but I just wanted to be sure I have the rough sequence of flashing correct here for an America Movil XT1058 (i.e. AT&T). Assuming I want to cut over to AT&T firmware from America Movil, is this roughly what I need to do? Am I missing steps?
1. Root the Moto X using Pwnmymoto (Mexico .apk from here: http://forum.xda-developers.com/showthread.php?t=2444957)
2. Install Clockworkmod on the rooted Moto X
3. Download the AT&T XT1058 image (from here: http://sbf.droid-developers.org/ghost_rcica/list.php)
4. Use Clockworkdmod to flash the Moto X with the image from #3?
Is that right? If so, I'll just need to work out the actual specifics of flashing w/ CWM and so on, but I'm sure there are tutorials for that.
sogrady said:
Apologies for the dumb question, but I just wanted to be sure I have the rough sequence of flashing correct here for an America Movil XT1058 (i.e. AT&T). Assuming I want to cut over to AT&T firmware from America Movil, is this roughly what I need to do? Am I missing steps?
1. Root the Moto X using Pwnmymoto (Mexico .apk from here: http://forum.xda-developers.com/showthread.php?t=2444957)
2. Install Clockworkmod on the rooted Moto X
3. Download the AT&T XT1058 image (from here: http://sbf.droid-developers.org/ghost_rcica/list.php)
4. Use Clockworkdmod to flash the Moto X with the image from #3?
Is that right? If so, I'll just need to work out the actual specifics of flashing w/ CWM and so on, but I'm sure there are tutorials for that.
Click to expand...
Click to collapse
Pretty sure all you need to do is use rsdlite not pwnmymoto or clockwork mod
Sent from my Nexus 7 using Tapatalk 4
You have to unlock the bootloader first
Sent from my XT1058 using XDA Premium 4 mobile app
---------- Post added at 05:47 AM ---------- Previous post was at 05:41 AM ----------
juantechnologypr said:
You have to unlock the bootloader first then flash with rsdlite the att us .sbf ( Remember edit first the xml, you have to remove the getvar line on the xml)
Sent from my XT1058 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sent from my XT1058 using XDA Premium 4 mobile app
Last night I switched to 139.12.57.ghost_row.Retail.en.US (there's a flashable zip in the dev forum) and it doesn't have the bloatware ATT has. In fact, the APN settings where downloaded automatically and i got LTE. Seems like the phone can use any rom without problem
For any of you that have successfully flashed it with the AT&T, Ghost or other ROMs, would you mind doing a quick high level how to? i.e. here are the individual steps I used? I don't mean how to complete each step - that can be looked up - but when I see things like "Remember edit first the xml, you have to remove the getvar line on the xml" I get nervous, because I would not have known to do that.
What interests me most is your thoughts on the following themes:
1. It it possible to flash Rogers in the same way you flashed AT&T or TMO?
2. Is it possible to flash TMO sys with AT&T baseband or vice versa?
3. What about SIM unlock state, when you flash another cellular op, does it get locked?
waiflih said:
Last night I switched to 139.12.57.ghost_row.Retail.en.US (there's a flashable zip in the dev forum) and it doesn't have the bloatware ATT has. In fact, the APN settings where downloaded automatically and i got LTE. Seems like the phone can use any rom without problem
Click to expand...
Click to collapse
Do I need to unroot before flashing this zip? Is it working fine on your AmericanMovil XT1058?
I didn't unroot, and i have unlocked bl
Enviado desde mi XT1053 usando Tapatalk
this is a flashable zip for verizon moto g's that are unlocked and have custom recoveries. this zip can be flashed after you flash a rom to re enable data and fix network name. i have currently only tested this on the cm11 nightly for falcon. if anyone else wants to test it they can just post if it works for you. the zip edits the apn settings and some lines in the build.prop
Shawnsch said:
this is a flashable zip for verizon moto g's that are unlocked and have custom recoveries. this zip can be flashed after you flash a rom to re enable data and fix network name. i have currently only tested this on the cm11 nightly for falcon. if anyone else wants to test it they can just post if it works for you. the zip edits the apn settings and some lines in the build.prop
Click to expand...
Click to collapse
Thanks so much! I am not unlocked yet but plan to be soon and when I am I will definitely give this a go. :good:
classic757 said:
Thanks so much! I am not unlocked yet but plan to be soon and when I am I will definitely give this a go. :good:
Click to expand...
Click to collapse
let me know if it works!
Sent from my Moto G using Tapatalk
Verizon Moto G can be unlocked???
Sent from my XT1031 using XDA Free mobile app
I paid the Chinese middle man $45 to get me the boot loader unlock code and it worked like a charm
Sent from my Moto G using Tapatalk
Shawnsch said:
I paid the Chinese middle man $45 to get me the boot loader unlock code and it worked like a charm
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
Yep. Same here. Heard back in about 18 hours with successful unlock code. Isn't it great?!
Yes it is I love this phone even more now
Sent from my Moto G using Tapatalk
Have you guys tried flashing kernels yet?
Sent from my XT1028 using Tapatalk
so, every rom i've flashed has crashed at startup ._. and i forgot to make a system backup after unlocking the bootloader... my phone is totally screwed. Can i get any help from you guys?
TotesMyGoats said:
so, every rom i've flashed has crashed at startup ._. and i forgot to make a system backup after unlocking the bootloader... my phone is totally screwed. Can i get any help from you guys?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2542219 just flash the verizon firmware and activate your phone again. You wont be charged again since verizon recognizes phones by the MEID not the Rom
So I have installed countless different firmwares and flashed this each time. My phone will not roam properly, even if I restore from a backup of my firmware. I have to flash the original Moto G firmware and upgrade back to KitKat each time for roaming to continue working. Even with this mod, I cannot roam.
With the nature of my job, I need roaming capabilities. Any ideas here?
Shawnsch said:
I paid the Chinese middle man $45 to get me the boot loader unlock code and it worked like a charm
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
Can you give me a link to him or some kind of contact?
Sent from my XT1028 using XDA Premium 4 mobile app
xrilex said:
Can you give me a link to him or some kind of contact?
Sent from my XT1028 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Here you go:
http://forum.xda-developers.com/moto-x/general/china-middleman-t2751177
I just want to bump this thread for anyone just now unlocking their XT1028 bootloader using SunShine and trying to install custom ROMs. I spent a considerable amount of time manually modifying a ROM using pieces from the stock VZW 4.4.4 ROM in order to fix this same issue, only to receive direction to this very helpful post after the fact (thanks classic757).
Woot!!!! Happy Day!!!!
http://www.androidcentral.com/motorola-enables-bootloader-unlocks-verizon-moto-x-2014
:victory::victory::victory::victory::victory:
Now if we could only get VoLTE enabled.
I almost gave up on this device! I was so close to pulling the trigger on a Pure X. Will try to unlock tomorrow. So excited to able to tether again!
Sent from my iPad using Tapatalk
it worked on mine now i wish i could get marmellow firmware
xt1096 bootloader unlocked!!! finally! I just unlocked my device.
Anyone wishing to unlock xt1096 verizon moto x 2014 2nd generation phone's bootloader, it can now be done through official motorola bootloader unlock web service. Hope this is good news for all who have waited as long as I have.
Apologies for posting this in mutliple places but I just pulled the trigger on Nexus 6 when this report came in through google now of all places. Glad it did. cancelled order and moving on to future freedom! Been too long since I have been able to root but love this phone.
This Is aweome news. My Moto x pure is shelved for now. Last night I unlocked my Verizon 2014, and installed CM13. Its been flawless so far. And everything but moto voice still works!
XT1096 Marshmallow ?
Wondering if any devs will port Marshmallow to our VZW model ? Is it possible to fastboot flash all files except modems from another MM firmware like the XT1092 orXT1097 ?
dan409 said:
Wondering if any devs will port Marshmallow to our VZW model ? Is it possible to fastboot flash all files except modems from another MM firmware like the XT1092 orXT1097 ?
Click to expand...
Click to collapse
Only if you don't use Verizon service. When you flash the files from xt1092, xt1097, or xt1095 it loses CDMA, which means it won't work with Verizon's service. But if you don't use Verizon, then yes that will work fine, just don't flash the radio files and you can have marshmallow on the xt1096.
Sent from my XT1095 using Tapatalk
Thanks for the reply, unfortunately I am on verizon and was hoping that just leaving out the radio files would work to get MM on the phone. I was just assuming that if CDMA was working on the CM roms that it would be possible for it to work on a MM rom also.
Guess I will be satisfied with having u/l bootloader, root, and TWRP installed which is way more than I ever thought would happen to this phone so its all GOOD !
dan409 said:
Thanks for the reply, unfortunately I am on verizon and was hoping that just leaving out the radio files would work to get MM on the phone. I was just assuming that if CDMA was working on the CM roms that it would be possible for it to work on a MM rom also.
Guess I will be satisfied with having u/l bootloader, root, and TWRP installed which is way more than I ever thought would happen to this phone so its all GOOD !
Click to expand...
Click to collapse
You can use some custom marshmallow roms with cdma. For example cm13 works.
Sent from my XT1095 using Tapatalk
usmc1488 said:
This Is aweome news. My Moto x pure is shelved for now. Last night I unlocked my Verizon 2014, and installed CM13. Its been flawless so far. And everything but moto voice still works!
Click to expand...
Click to collapse
Moto Voice doesn't work! Even better!
I've had so many problems with that crap...
I am on an XT1096 with an unlocked bootloader and running CM13. I am able to be on the phone while browsing the web, which is something I couldn't do on Lollipop. That and significantly better battery life are (at least) two reasons to upgrade.
can i use some pure edition or eu xt1092 firmwares for xt1096 p.s currently living in europe
kaktusmaier125 said:
can i use some pure edition or eu xt1092 firmwares for xt1096 p.s currently living in europe
Click to expand...
Click to collapse
Yes you can. Just don't flash the radios, if you flash the radios you won't have signal.
Sent from my XT1095 using Tapatalk
Can I unlock LTE band after root?
AGISCI said:
Yes you can. Just don't flash the radios, if you flash the radios you won't have signal.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
sorry for my English , I just wanted to confirm in 1096 the only way to get the rom flashing MM is another model , but exactly should flash files , and that model. as I understood not flash the radios, and if if would wish to return to an official rom my model ( downgrade) is possible
Enviado desde mi XT1096 mediante Tapatalk
I have a verizon xt1096, how to flash pure edition mm on my device? I dont use verizon services...im on gsm carrier. Im new to this phone...thanks in advance
Sent from my XT910 using Tapatalk
demonshouter said:
I have a verizon xt1096, how to flash pure edition mm on my device? I dont use verizon services...im on gsm carrier. Im new to this phone...thanks in advance
Sent from my XT910 using Tapatalk
Click to expand...
Click to collapse
hi there, read the post of how to convert your moto x to moto x pure edition
http://forum.xda-developers.com/moto-x-2014/general/guide-xt1097-to-xt1095-nextel-t2972693
i am unlock to bootloader, and follow the post 2 step by step, read carefully for your moto x not brick :good:
Completely stock XT1096 (Verizon): Device does not qualify for bootloader unlocking..
Anyone have any idea why I am receiving a "bootloader cannot be unlocked" message ("Your device does not qualify for bootloader unlocking") on the Motorola site. I have an XT1096. I previously had the same model and was able to successfully unlock. Had to replace phone with the same model from Asurion and am now receiving this message when I attempt to unlock. I have run the process several times and have even used the Data Scrub Tool to ensure that my unlock codes are formatted properly. No luck...
Thanks
newtoncd said:
I am on an XT1096 with an unlocked bootloader and running CM13. I am able to be on the phone while browsing the web, which is something I couldn't do on Lollipop. That and significantly better battery life are (at least) two reasons to upgrade.
Click to expand...
Click to collapse
So when you flashed CM13 on your VZW MotoX it enabled simultaneous voice & data (not WiFi)? I just wanted to confirm this before I upgrade..that would be AWESOME!
ssmcd said:
So when you flashed CM13 on your VZW MotoX it enabled simultaneous voice & data (not WiFi)? I just wanted to confirm this before I upgrade..that would be AWESOME!
Click to expand...
Click to collapse
It was wi-fi and not VoLTE, sorry for the confusion.
I unlocked the bootloader on my Moto X play, and now when I boot the device, I either have
-No Sim or Wifi and it crashes after a while
-Sim and Wifi, but no mobile data
I have the Australian Vodafone "Vfau" Moto X Play
Ataru_ said:
I unlocked the bootloader on my Moto X play, and now when I boot the device, I either have
-No Sim or Wifi and it crashes after a while
-Sim and Wifi, but no mobile data
I have the Australian Vodafone "Vfau" Moto X Play
Click to expand...
Click to collapse
Looks like you broke something, well there are two options you can go from here:
1. Flash official firmware, you can do this by looking for your device in this link Official Stock Firmware Downloads. Press Ctrl F and type either XT1562 or XT1563 depending on your phone model.
2. Flash a custom rom, more information can be found in the development section.
Quick fix: try removing and inserting sim and seeing if it works as there is a known bug for this problem. May not work!
mazhdini said:
Looks like you broke something, well there are two options you can go from here:
1. Flash official firmware, you can do this by looking for your device in this link Official Stock Firmware Downloads. Press Ctrl F and type either XT1562 or XT1563 depending on your phone model.
2. Flash a custom rom, more information can be found in the development section.
Quick fix: try removing and inserting sim and seeing if it works as there is a known bug for this problem. May not work!
Click to expand...
Click to collapse
I've tried all the Stock Firmwares for the XT1562 and CM13 and none of them work. Been lurking here for a whole looking for a fix and cant find one
Ataru_ said:
I've tried all the Stock Firmwares for the XT1562 and CM13 and none of them work. Been lurking here for a whole looking for a fix and cant find one
Click to expand...
Click to collapse
Could you please expand on what "none of them work" mean please, its a very vague answer. I guarantee you that flashing the 'right' device specific firmware will result in a functional system at least software wise.
mazhdini said:
Could you please expand on what "none of them work" mean please, its a very vague answer. I guarantee you that flashing the 'right' device specific firmware will result in a functional system at least software wise.
Click to expand...
Click to collapse
When I mean all of them I have tried the Europe, Asia and Latin america flash and all of them result in the following
-No Sim or Wifi and it crashes after a while
-Sim and Wifi, but no mobile data
I have a theory that the "Vfau" stock will because of the Modem Firmware work but I cannot find a rom of it.
Ataru_ said:
When I mean all of them I have tried the Europe, Asia and Latin america flash and all of them result in the following
-No Sim or Wifi and it crashes after a while
-Sim and Wifi, but no mobile data
I have a theory that the "Vfau" stock will because of the Modem Firmware work but I cannot find a rom of it.
Click to expand...
Click to collapse
Did you flash the stock ROMS with fastboot? Because like this you delete the old modems and therefore there shouldn't be any problems with that anymore after doing this.
Sent from my XT1562 using XDA-Developers mobile app
Ausraster said:
Did you flash the stock ROMS with fastboot? Because like this you delete the old modems and therefore there shouldn't be any problems with that anymore after doing this.
Sent from my XT1562 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yeah I flashed the ROMs using fastboot, there were even a few times I just flashed the modems JUST IN CASE