Database Users

can't flash any ROM's - SD card problem

Can anyone extend some help to a TF300T n00b?
I flashed the unofficial CM10 Jellybean ROM to my tf300t, and since the storage isn't working I can't move another ROM or even the stock firmware file to my SD card to flash. So, basically I'm stuck on the unofficial CM10 for now...
posted here because I can't post in the actual developement thread

just connect the tablet to a pc and copy the rom to the tablet. I dont rember if windows sees the internal storage. If it dosent linux should or you can install adb and push the file to /sdcard from your computer.

go here and dl the prog:
http://www.google.de/url?sa=t&rct=j...sg=AFQjCNG5sMnAkUGOfTZHgHJLFBARtdiyPg&cad=rja
extract it
boot into tecovery.
open the prog
choose the rom you like and push it to your tablet.
It is not possible to do it when you are in system, cause you cant write anything to the internal space.

mikaole said:
go here and dl the prog:
http://www.google.de/url?sa=t&rct=j...sg=AFQjCNG5sMnAkUGOfTZHgHJLFBARtdiyPg&cad=rja
extract it
boot into tecovery.
open the prog
choose the rom you like and push it to your tablet.
It is not possible to do it when you are in system, cause you cant write anything to the internal space.
Click to expand...
Click to collapse
I couldn't get the fast ADB pusher to work, nor the actual ADB. Fast pusher said it succeeded a few times but I couldn't find the new ROM on my SD card in CWM.

http://forum.xda-developers.com/showthread.php?t=1680570
Check here it has instructions on how to setup and use adb

MegaNoob said:
http://forum.xda-developers.com/showthread.php?t=1680570
Check here it has instructions on how to setup and use adb
Click to expand...
Click to collapse
looks promising. I hadn't been attempting to push the files while the tablet was in recovery because adb wouldnt recognize the tab when it was in recovery. I don't have my tablet cable, but I will try tomorrow morning. Thanks again.

ljungberg3 said:
looks promising. I hadn't been attempting to push the files while the tablet was in recovery because adb wouldn't recognize the tab when it was in recovery. I don't have my tablet cable, but I will try tomorrow morning. Thanks again.
Click to expand...
Click to collapse
if adb doesn't recognize the pad when it's in recovery, the drivers may not be installed correctly

paedz718 said:
if adb doesn't recognize the pad when it's in recovery, the drivers may not be installed correctly
Click to expand...
Click to collapse
I installed the drivers exactly as the guide directed, then tried using regular ADB, which didnt work. So I tried to use the ADB fast push and it didn't work either, under the "information" tab on the fast adb program it says
"Failed to mount as R/W"
is this a problem?

I got files to push via ADB, installation was aborted on the stock rom
I will try to find another stock rom to flash and update you guys. thanks for all the help so far

Can you still get to fastboot mode?
---------- Post added at 10:53 PM ---------- Previous post was at 10:44 PM ----------
If yes, dl the latest. Asus. STOCK, extract the blob, put it in the Fastboot Folder and. Open cmd
cd to the fastboot directory and write
fastboot -i 0x0B05 flash system blob
This will flash stock.
Don't give up, when it's not working. Just rewrite and try again and again.
A, user in the German Forum needed 20 times till it finally run through.

mikaole said:
Can you still get to fastboot mode?
---------- Post added at 10:53 PM ---------- Previous post was at 10:44 PM ----------
If yes, dl the latest. Asus. STOCK, extract the blob, put it in the Fastboot Folder and. Open cmd
cd to the fastboot directory and write
fastboot -i 0x0B05 flash system blob
This will flash stock.
Don't give up, when it's not working. Just rewrite and try again and again.
A, user in the German Forum needed 20 times till it finally run through.
Click to expand...
Click to collapse
I was able to push and flash a stock firmware! thank god! haha, and thank you guys for all the help!

ljungberg3 said:
I was able to push and flash a stock firmware! thank god! haha, and thank you guys for all the help!
Click to expand...
Click to collapse
Np

So, much of the stuff in this and other threads has been a tremendous help. I did pretty much exactly what OP did in this thread http://forum.xda-developers.com/showthread.php?t=1779080.
That thread lead me to this one, as I was having trouble getting my computer to recognize the usb drivers. I was able to finally get ADB to see the tablet, however, when I go to push the stock rom, I get an error message of "Protocol Failure" in cmd.
Any ideas?
http://s12.postimage.org/unt8ag1vh/adbcmd.jpg
Created new thread as OP solved his problem.

Accidentally Deleted Internal Storage in Recovery

I'm stuck in TWRP with no OS or roms to flash. I tried to mount my USB but for some reason it is not working. When I click to mount the USB, the box stays unchecked.
What should I do?

michaelearth said:
I'm stuck in TWRP with no OS or roms to flash. I tried to mount my USB but for some reason it is not working. When I click to mount the USB, the box stays unchecked.
What should I do?
Click to expand...
Click to collapse
Install other Drivers for your Computer or Flash a Kdz

Krenol said:
Install other Drivers for your Computer or Flash a Kdz
Click to expand...
Click to collapse
What is a kdz?

I installed the LG G2 drivers and I ca only get my device to show up when I run the command "adb devices" when I reboot into bootloader but my phone just hangs on the LG logo. When I try to push a rom.zip I get the error message "permission denied."

michaelearth said:
What is a kdz?
Click to expand...
Click to collapse
I ended up doing the same thing accidentally a few months back...
1) install LG flash tool and drivers on your computer.
2) Download KDZ for your phone/provider/country.
3) Restart phone in Download Mode.
4) Flash KDZ to phone. Phone will be completely clean like from the factory.
All the info and instructions are here on the forum.
---------- Post added at 02:18 PM ---------- Previous post was at 02:14 PM ----------
michaelearth said:
I installed the LG G2 drivers and I ca only get my device to show up when I run the command "adb devices" when I reboot into bootloader but my phone just hangs on the LG logo. When I try to push a rom.zip I get the error message "permission denied."
Click to expand...
Click to collapse
A rom.zip won't work as you have no baseband to work with. You need to flash a clean factory rom (KDZ file) and start over again.

Kiwi_Dude said:
I ended up doing the same thing accidentally a few months back...
1) install LG flash tool and drivers on your computer.
2) Download KDZ for your phone/provider/country.
3) Restart phone in Download Mode.
4) Flash KDZ to phone. Phone will be completely clean like from the factory.
All the info and instructions are here on the forum.
Click to expand...
Click to collapse
Thank you so much!! I just flashed the kdz and booted up into stock 4.4.2. Problem solved

[Q&A] [HowTo] Root,TWRP, patched aboot LG L-FINO Dual [D295tested]

Q&A for [HowTo] Root,TWRP, patched aboot LG L-FINO Dual [D295tested]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [HowTo] Root,TWRP, patched aboot LG L-FINO Dual [D295tested]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

SH1M4BD3 said:
Does anyone here upgrading to 10D??? So can you tell me that purpledrake exploit still works??
Click to expand...
Click to collapse
No root with PurpleDrake on 10D. I took screenshot of error, but can't attach it(
/system/xbin/su: No such file or directory

I flash your's "V10C" and in my phone info get firmware version "V10F". What it mean?

Haydjek..its indonesian firmware not sure if this codename may differents on each country its depend on LG perhaps.

And about our devices it should ve opensourced, kernel,firmware was here http://opensource.lge.com/osList/list?m=Mc001&s= LG L-FINO was there but what really confused me that there's no D295 L FINO and thats model was recognized as G2lite..
See this picture

Sorry how do you use Terminal Emulator? Im trying flash the TWRP but i cant. Can you help me?

1. Rooted
2.open terminal type su and grant its access..
3.type the comand correctly

Okey i havent write su. Thanks!! (its a nob question sorry hehe)

Thats fine..we're all nob..

Other question sorry. What can happen if i flash your rom in my d290n with v10b? Do you think it Will work?

1 DO TWRP BACKUP
2 partially works, as D295 has dualsim capable.
3 bootloop(worstest), but you can flash the stock firmware,
or if you're lucky one..you can still reach the device via adb, just type adb reboot recovery to restore your backup.
---------- Post added at 04:38 PM ---------- Previous post was at 04:35 PM ----------
More important preparing whole stuff&tools needed on your pc, before you process any noobish mods. LG FLASTOOL,YOUR .KDZ FIRMWARES, ADB TOOLS INSTALLED ON YOUR PC.. Never stop tryin..there's no nuclear war happen cause of this things

I have already done a recovery and aboot.bin backup. How can i access tu adb comands if it doesnt work? i have experience flashing some friends'mobiles with flash tools but i have never used adb controls
---------- Post added at 04:42 PM ---------- Previous post was at 04:39 PM ----------
I have LG flash tool and my firmware, do i need adb tools?

Just check that you already ticked the Usb debug option on your phone, Boot into recovery, backup whole system..
Flash my stock custom, when you stuck on lg logo, put your phone into your pc , make sure that ADB stuff already installed, open your terminal type adb devices when youre lucky you can see the phone was conected. Type adb reboot recovery , the phone should be rebooted and entering TWRP, just restore that backup..and done
---------- Post added at 04:52 PM ---------- Previous post was at 04:47 PM ----------
Its depend, when youre not lucky(the device not detected in adb) then the adb stuff will useless, in fact you've to flash it to stock.

I Will try this night and i tell you the result

How was the result??you did it???

I couldn't flash your stock ROM, the process flashing it was correct but when the phone reboot tha screen was black all the time so i had to flash a firmware. I will try to create a rom stock for d290

Whaat...haha sems you got the worst huh..yup just build your own its easier now

I have to root and install the twrp again and see how to make the zip from a nandroid backup. Then i will do the stock rom. Thank you!!

Our device also known as L70 Plus DualSim (L70PDS-this abbreviation can be found in many system .conf files) and G2 Lite too...
SH1M4BD3 said:
And about our devices it should ve opensourced, kernel,firmware was here ... LG L-FINO was there but what really confused me that there's no D295 L FINO and thats model was recognized as G2lite..
See this picture
Click to expand...
Click to collapse

Is there way relock bootloader after so i dont lost warranty? I want to help with develloping rom but i have 0 experience with it. I have Lg l fino D290n V10e-EUR-XX.
Purple drake will not find my device after rebooting
Alright. We're ready to go. We're going to temproot your phone first. Press enter when you're ready!
Press [enter] to continue...
Rebooting phone...
Waiting for device.
/edit2/
Ok i tried it manually after i reboot my phone "adb reboot --bnr_recovery" and then "adb devices" its say
List of devices attached
???????????? no permissions
its there way to downgrade firmware?

Need Blu Vivo Air LTE Stock ROM!

Anyone know where I can get a stock rom for my Vivo Air LTE?

I have a system.IMG and boot.img
I have a system.IMG and a boot.img if you still need it?

i need it. I accidentally deleted a system/lib file. thought i put it there. I did not... how would I go about installing? I'll google the steps in the mean time.

trentag1988 said:
i need it. I accidentally deleted a system/lib file. thought i put it there. I did not... how would I go about installing? I'll google the steps in the mean time.
Click to expand...
Click to collapse
After downloading system.img to your computer you need to put the vivo air LTE in fastboot mode by turning it completely off. Then hold down power+volume up. Then choose reboot to bootloader connect the phone to your computer. Make sure you have adb and fastboot installed via Android SDK where adb resides such as the platform-tools directory put system.img in that folder and in that folder open it. Right click any white space while holding down shift on your keyboard and click open command from here. Then you can enter fastboot commands. fastboot devices make sure your device is detected then fastboot -w then fastboot format system then fastboot flash system system.img is your recovery still stock? here are three files system.img if your recover is messed too then i include recovery as well im not too sure if you need the boot.img but i included it in this link:
https://drive.google.com/drive/folders/0B4_9-6sS8dFeTGpSLVVSN015STA?usp=sharing
let me know how it goes ok??
---------- Post added 28-09-2016 at 12:10 AM ---------- Previous post was 27-09-2016 at 11:26 PM ----------
I also created a checksum file.chk use ubuntu's md5sum -c file.chk. To check md5

Recovery is still stock. I got 15 second adb installer. Is that the same as android SDK? I'll have to try this tonight. Google drive is requesting that I get permission. Allow when you can. Thank you! I'll attempt this tonight
---------- Post added at 05:07 PM ---------- Previous post was at 05:05 PM ----------
Is it okay that I didn't allow USB debug before bricking?

sorry i dunno if i shared it correctly on my google drive try this
trentag1988 said:
Recovery is still stock. I got 15 second adb installer. Is that the same as android SDK? I'll have to try this tonight. Google drive is requesting that I get permission. Allow when you can. Thank you! I'll attempt this tonight
---------- Post added at 05:07 PM ---------- Previous post was at 05:05 PM ----------
Is it okay that I didn't allow USB debug before bricking?
Click to expand...
Click to collapse
try this link i shared it to all
https://drive.google.com/drive/folders/0B4_9-6sS8dFeTGpSLVVSN015STA?usp=sharing
https://drive.google.com/drive/folders/0B4_9-6sS8dFeTGpSLVVSN015STA?usp=sharing

Downloading now. Can't wait to try!!! Thank you so much. That little phone is surprisingly amazing

here's the kicker though... i tried to 'restart to bootloader', i get stuck on blu splash screen. after getting rid of that one file, it's stayed stuck at blu screen. ever encountered this?

Blu vivo screen
When you are in recovery and reboot into bootloader that's where the Blu vivo air sign is stuck but you can execute fastboot commands

So, I got it to work. I had to terminal fastboot command, then reboot to bootloader, and it finally stuck. You are a life saver.
Was much easier to do in Linux than it was in Windows.

I put it in root with "sudo -s" command then "fastboot install system system.img" do I need to leave the bootloader unlocked??
---------- Post added at 01:42 AM ---------- Previous post was at 01:40 AM ----------
I was thinking of compiling a twrp for this phone, but I'm a little not sure exactly how to do it. I've seen tutorial, but vague

Blu vivo air lte
Alright, that's what I wanted to hear!! Glad you got your phone back...Sux there's no Roms and custom recovery for this phone but at least you got it working glad to have helped!

About the system.img
trentag1988 said:
here's the kicker though... i tried to 'restart to bootloader', i get stuck on blu splash screen. after getting rid of that one file, it's stayed stuck at blu screen. ever encountered this?
Click to expand...
Click to collapse
OK I had to root this vivo air LTE via king root to backup system image so if you want full stock you need to root your phone again with king root and then install super Sume from play store to remove KingRoot and have it replaced with SuperSU. Then you can fully unroot with SuperSU!!! I tried playing Pokemon go and it wouldn't let me because it thought my phone was rooted so that's one way to fix that!

Ohhhhhhh I was wondering how you got the image files ? I haven't had any issues with it so far. It's back to its wonderful goodness. By the way, how do you quote someone on here?? I see everyone doing it, but I don't know how

Quotes
Not too sure

sideloading adb firmware

So I am really stuck and don't know what to do. Unlocked the bootloader, installed twrp just fine and rooted. then I went to install a custom rom after I made sure it was working and then it kicks me back to the normal recovery. twrp is gone and I can't fastboot the firmware cause I wiped it to flash a rom. Now when I go to adb sideload I keep getting error 21 footer is wrong and signature verification has failed. Can someone please point me in the right direction to fix my phone? thanks

Download stock firmware and flash it via fastboot,all the instructions included in the link https://www.essential.com/developer/current-builds

gm007 said:
Download stock firmware and flash it via fastboot,all the instructions included in the link https://www.essential.com/developer/current-builds
Click to expand...
Click to collapse
Fastboot isn't enabled cause I wiped to flash a rom. and every time I try to sideload it with adb it fails.

tommyjames1992 said:
Fastboot isn't enabled cause I wiped to flash a rom. and every time I try to sideload it with adb it fails.
Click to expand...
Click to collapse
To use fastboot u need to boot ur phone to bootloader mode not to recovery,just follow the information in the link i gave you to know how to flash the firmware.

gm007 said:
To use fastboot u need to boot ur phone to bootloader mode not to recovery,just follow the information in the link i gave you to know how to flash the firmware.
Click to expand...
Click to collapse
Nothing pops up when I type in the command fastboot devices. My phone doesn't show.

tommyjames1992 said:
Nothing pops up when I type in the command fastboot devices. My phone doesn't show.
Click to expand...
Click to collapse
This phone is tricky to get recognized,try changing the usb cable, different usb port and make sure you have the correct drivers installed,and the latest adb fastboot files.

gm007 said:
This phone is tricky to get recognized,try changing the usb cable, different usb port and make sure you have the correct drivers installed,and the latest adb fastboot files.
Click to expand...
Click to collapse
weird thing is I can get it to show when I type fastboot -i 0x2e17 but I am not sure how to use that to flash the firmware. I believe I have all the lastest drivers since I unlocked my bootloader yesterday.

tommyjames1992 said:
weird thing is I can get it to show when I type fastboot -i 0x2e17 but I am not sure how to use that to flash the firmware. I believe I have all the lastest drivers since I unlocked my bootloader yesterday.
Click to expand...
Click to collapse
I had my phone for a week now and happened the same for me ,my pc wasn't recognizing the phone.
All I did is searched for drivers and new adb fastboot files and that did the trick.
Try to remove the phone from device managers on ur pc and install the drivers manually.
Good luck.
---------- Post added at 07:35 PM ---------- Previous post was at 07:15 PM ----------
Try this adb fastboot files,but remove the older one first
https://androidfilehost.com/?fid=3700668719832240948

gm007 said:
I had my phone for a week now and happened the same for me ,my pc wasn't recognizing the phone.
All I did is searched for drivers and new adb fastboot files and that did the trick.
Try to remove the phone from device managers on ur pc and install the drivers manually.
Good luck.
---------- Post added at 07:35 PM ---------- Previous post was at 07:15 PM ----------
Try this adb fastboot files,but remove the older one first
https://androidfilehost.com/?fid=3700668719832240948
Click to expand...
Click to collapse
So I am still got getting fastboot working to flash stock firmware but I managed to reflash twrp and install AICP custom rom. So at least I can use the device. I will figure out the fastboot stuff later I guess lol.