I wiped my phone to flash PA 4 for the D803 again, but realized after that I no longer had the firmware saved on my phone drive. Now I can't even put the firmware on the phone because I can't boot and change to MTP mode! If I try and boot, it shows the LG logo and then stays on the PA boot animation forever.
I tried the method here: http://forum.xda-developers.com/showthread.php?t=2432476 but like many other people it fails at 49%!
Can someone here help? I'm scared half to death!
See my thread here. Let's see if we can fix this brick!
http://forum.xda-developers.com/showthread.php?t=2660882
Related
Ok im stuck here, Totally messed up my G2. :crying:
Ive been on CM11 for quit some time but as the G2 recently got updated to 4.4.2 decided to go back to stock, I was rooted with iRoot 25 and had TWRP v2.7.0.0 installed.
I done the stupidest thing ever, Set my phone to download mode and ran LG Flash tool, The flash tool updated my D802 but now im stuck in boot loop, I see the LG logo then my carrier logo for a few secs then a repeat of that, I left it for about 15 mins but just kept doing the same loop!
I can access download mode fine!
Any suggestions?
Thanks.
Phew, Never mind, Been looking into this for three hours, Just cam across and fixed it using this method!
http://forum.xda-developers.com/showthread.php?t=2687768
Hello everyone,
i tried installing CM11 on my d802 with CWM. Flashed the zip and worked fine but im now hanging in a boot loop and only the CM splashscreen is showing. I tried to boot into recovery but it wont let me, only thing working is the download mode. I searched a couple of threads here but didnt really found anything that helps me.
Hope someone got an idea how to get my G2 working again, dont even care much if its stock or CM.
seasen said:
Hello everyone,
i tried installing CM11 on my d802 with CWM. Flashed the zip and worked fine but im now hanging in a boot loop and only the CM splashscreen is showing. I tried to boot into recovery but it wont let me, only thing working is the download mode. I searched a couple of threads here but didnt really found anything that helps me.
Hope someone got an idea how to get my G2 working again, dont even care much if its stock or CM.
Click to expand...
Click to collapse
This happend to me with my LS980, heres what I did, i waited until my G2 was fully charged, i knew it was fully charged becuase in download mode you should see the letter B, the letter B indicates the battery, if your battery is at "B100" detach your phone from the charger, hold the power button for the phone to restart, and quickly press and hold the power button and the volume down button at thw same time,, repeat this step again quicly after the Boot Logo shows up, and you should boot into Recovery Mode and restore your backup.
Sent from my LS980 running PA 4.4.4 KitKat using Tapatalk???
I tried that for like a 100 times, it wont start into recovery. it just starts back to the splashscreen.
trying this now : http://forum.xda-developers.com/showthread.php?t=2432476
howw to charge the phone when it on bootloop,whenever i plugged the cable its start bootloop
Hey guys,
So I am currently stuck in a boot loop. I tried installing a new rom but upon reboot it did not but stay at the LG splash screen.
That was the beginning of my problems and eventually led to my TWRP recovery being corrupted, as well as my phone being out of battery. I can not get it to charge at all even while twrp was working. i have tried flashing it multiple times to the stock firmware however the phone does not charge in download mode and just turns off before the flash is complete.
Any help would be greatly appreciated. Thank you.
MrxxMrsSmith said:
Hey guys,
So I am currently stuck in a boot loop. I tried installing a new rom but upon reboot it did not but stay at the LG splash screen.
That was the beginning of my problems and eventually led to my TWRP recovery being corrupted, as well as my phone being out of battery. I can not get it to charge at all even while twrp was working. i have tried flashing it multiple times to the stock firmware however the phone does not charge in download mode and just turns off before the flash is complete.
Any help would be greatly appreciated. Thank you.
Click to expand...
Click to collapse
try cse flash it might help
Update/Fix:
Got it to work again! I let the battery drain to 0% so I can boot it into download mode where I used the LG FlashTool to install ZVC. It's completely working now. I learned from my mistake.
-----------------------------------------------------------
Original post​
How it occurred:
I was trying to flash a ROM today with TWRP but I accidentally deleted/formatted my G2. (I haven't flashed anything in a while so I forgot that would delete the .zips) TWRP was unable to mount the USB so I restarted my phone and now I'm stuck at the LG logo.
What happens:
When I hold down the power button the screen goes black and the logo pops up again with the green and blue LED, so I can't turn off my phone completely. I tried going into download mode and recovery mode but it just shows the LG logo and nothing else.
If anyone knows how I can fix this, that would be great. :good:
Also, I have LG FlashTool. If I can get into download mode I think I'll be able to fix it.
Mod Edit:
Fixed and Thread closed at OPs request
Hello,
I think I'm in trouble. My LG G2 D802 is stuck in firmware update screen, where it stays at 0%. I can't flash for some reason, it says it isn't connected to my computer when I try to.
This happened after I tried to flash back to the original LG G2 firmware. It didn't work, gave me an error and now I'm stuck with this screen, whatever I try.
Can anyone please help me?
Managed to solve it using the second method here.
http://forum.xda-developers.com/showthread.php?t=2432476