I need to find a site where I can down load the X-mail program from. I have two users who had XDA2 and have been upgraded to XDA2i which the program is no longer included in the boot firmware that unpacks
Please advise as I cannot find it on O2 site and support seams very limited in helping with links.
Hello,
Here's some concrete work from the IMEI update project.
Please use the attached file and report your findings here.
Instructions:
1. Extract the ZIP
2. Run the file iWizard
3. Make sure ActiveSync is running and your phone is connected via USB
4. Make sure Windows Mobile has finished booting
5. Click "Next" in iWizard, let it work (shouldn't take more than 10 seconds)
Let us know:
1. If iWizard worked:
a. The model of your phone
b. The IMEI # and checksum codes if you like (you can PM for your security)
2. If iWizard failed:
a. How it failed
b. Any error messages, or screenshots of failure
c. The model of your phone
The goals of this alpha release are as follows:
1. To determine which HTC phone models work with our method
2. To determine the algorithm of the IMEI checksum codes so we can update
Thanks for your interest!
Don't get too excited - this alpha release does NOT change your IMEI yet. That is coming soon, as soon as we know which phone models the above method works on and is reliable with!
Note: The iWizard works great on my i-mate k-jam.
I tried this a minute ago.
My qtek 9100 is connected to my pc, can synchronise with active synch but I received the error message I attached.
I have spv m500, its synchronized with my pc, but I recive the same error as canstb said...
sorry for my first quick reply.
I was thinking that my qtek9100 was cid unlocked apparently it was not. I used the tool lokiwiz v2b to unlock it and ran your program again.
and here is the result.
Thanks, please keep the results coming in! We'll figure what the checksum alg. is and then fix your phones :lol:
Guys, I think you should PM Sinan rather then publically posting your IMEIs.
As we all know, cloning and changing IMEIs may be illegal in your jurisdiction; additionally, publically posting your IMEI is liable to end up with it being cloned by thieves not from this board etc. Not wise, so be careful, and please stay legal.
V
thanks for your warning.
sinan, I am deleting my attachment to my previous message. if you need the info again, just ask for it.
can anyone tell how to download lokiwiz, and how can i find out if my Magician iz CID locked or not?
and is there any tool for unlocking SPV m500 (magician)?
thnx
Yes, can you please PM it? Also, did the tool accurately detect your real IMEI?
Everyone, please PM your IMEI and checksums for security...or if you're not comfortable with that, please just say if the tool correctly detected your IMEI on your phone model, and report the phone model.
aWizard/Lokiwiz can be used to CID unlock phones, available here on this forum as well...pretty easy to find and use them, they're free tools as well.
You may need to downgrade your ROM first...
i used lokiwiz to unlock my device, now some other message appears, here is the pic... and the program doesent stop, it tries to find imei, but it seems like it will never stop...
Is this on Vista? Please see if it works on a regular XP box...if not, thanks for letting us know, be sure to try with the next alpha.
no its not vista, its just a theme for xp.
so you think there might be a solution for my device to?
Was the unlock successful with the CID unlock tool?
I think you may need to downgrade your ROM and CID unlock your tool first.
According to what I've read in another discussions, this tool would work only on devices that store IMEI on DOC chips
These are - nearly all smartphones produced by HTC, and communicators like HTC Wizard and Prophet. The tool would never work on HTC Himalaya, BlueAngel, Universal, etc.
You can easily determine would the tool work on your device or not. Just take the ROM update tool, extract it with WinRAR. If it has the file "radio_.nbf" - the tool would not work at all.
The tool should not be called "HTC IMEI Restore Wizard" as it does not support all HTC devices. It should be renamed to something like "HTC IMEI-on-DOC Editor tool".
mimarsinan said:
The goals of this alpha release are as follows:
1. To determine which HTC phone models work with our method
2. To determine the algorithm of the IMEI checksum codes so we can update
.
Click to expand...
Click to collapse
it is easy to determ which models work, just buy all the HTC devices and try yourself and you will know. I am doing same thing, since i don't want risc affect any of the users phones.
chunky charly
Rascal you sound like a baby. We should try to help each other, not put each other down. And remember business is business! You couldnt have thought that you would be the only person that could provide a imei repare tool forever!!
Maybe now you will drop the price of your dongle or even better, make the program work without the dongle!!
Hopefully the release of mimar's tool will drive you to produce better things.
AFAIK the Wizard has a radio rom file, doesn't it? I've used the tool on my Wizard just fine.
Raskal, tale the suggestions of our good friends here - update your obsolete sales mechanism, get rid of the pkey dongle, that will probably be the only way for you to remain competitive.
Great work MimarSinan
thanks for share and not change a my device imei ..
my device : HTC Magician
device name: MDA Compact
Your device is CID unlocked, right?
Leerim said:
I have spv m500, its synchronized with my pc, but I recive the same error as canstb said...
Click to expand...
Click to collapse
The spv M500 is a Windows Mobile 2003SE device. As far as I am aware this tool is for Windows Mobile 5 devices.
Hello.
I was wondering where I can get free software in order for my T-mobile MDA vario to receive chinese SMS?
I tried searching for Monster Chinese but all of the download links stated that it is just a trial version.
Thanks.
CE Star for wm5-6 with crack
you can install CE-Star for u can use chinese font on you ppc.
connect your wizard with computer and install the CE-Star. then copy crack file to install on your ppc. then u will see the CE-Star word (Zhong) become white. it means cracked already or it will appear with black. if u continue using without cracked, some days ur wizard will error with sms.
i am also new here. how can i attach file for u? i have already attach in the attachment, but i wonder if u can find it or not.
Have a look at my post linked below:
http://forum.xda-developers.com/showpost.php?p=2819825&postcount=2
WM5 CE star for using Chinese on device
pleas contact me through my email for i can attach you the file of WM5 CE star for you can use Chinese font on your device. [email protected]
Hello, I have a HP iPAQ H4350, I'm finding it really hard to find any information on it.
I first attempted to upgrade to WM 5 or 6, however cannot find any details on how to do it, there are a lot of details on other more newer devices but not the H4350.
I then tried to install Opera Mini, but i get "there is no application associated with [NAME OF FILE]. Run the application, then open this file from within the application". I assumed I need some sort of Java application to allow me to run Java files, but I can't seem to find out how to do it...
I'm stuck Please help.
Sean
Turns out it's on PPC not WM
oh well, it was only a spare one of my dads that I could mess around with
anyone know how to install Opera Mini?
Hi all,
I have spent over an hour here trying to find this info (if it is available!) but without success so maybe someone can help me by reading this thread.
I have Palm Treo 500v with WM 6.1 version unlocked on my device and thinking about flashing with one ROM found here.
I would like to create a full ROM backup of my device, test the thing on Microsoft's simulator V3 (this is optional, if there is any better one please let me know!) and than flash my ROM on the device.
I am unsure on how to proceed with dumping (have emulators working but would like to have it on simulator as well).
It's not a problem to simulate any platform via VMWare, VirtualBox or MS (crappy) Virtual server as long as there are explanations in plain english language, ie what files do I need and explanation of commands.
Thanks for your help and keep up the great work!