[Q] How do you turn on Airplane mode automatically? - G2 Q&A, Help & Troubleshooting

How do you turn on Airplane mode automatically when you don't have any signal? To save battery life.
I've noticed cell standby is one of the apps that uses my battery the most. I think it would help me greatly because I live in New York City and spend at least 2 and a half hours a day in the subway with little to no cell coverage
I know there's apps that Let you do this manually, is there one that automates this process.

kromatic said:
How do you turn on Airplane mode automatically when you don't have any signal? To save battery life.
I've noticed cell standby is one of the apps that uses my battery the most. I think it would help me greatly because I live in New York City and spend at least 2 and a half hours a day in the subway with little to no cell coverage
I know there's apps that Let you do this manually, is there one that automates this process.
Click to expand...
Click to collapse
If you are rooted, you can use Tasker with the Secure Settings plug-in. You'll need to install the Secure Settings helper from within the app to be able to change airplane mode. You can then set up a Tasker profile which triggers airplane mode on or off based on various events or phone states. I'm not sure if you can trigger it when you don't have signal, but you might be able to find some other trigger or combination of triggers that works for you. Hope this helps!

Related

Terrible battery life

Hi -
I've had my HTC HD2 a few days and although I'm happy with it's features, I'm really frustrated by the poor battery life. The first day I used it the battery was dead within under 12 hours from me starting to use it, and at the start it was fully charged. On this first day I did have email and weather etc on auto check though.
So last night I disabled weather, set email to manual checking and disabled a few other things, but did leave HSDPA and 3G on. There was a slight improvement today but not much, the battery lasted the full 12 hours, but with only 2% remaining.
Both days I don't think my usage was very high. I'd maybe had 10 minutes of phone calls, sent around 10 text messages, listened to 45 minutes of music, checked one or two websites, and played games on the phone for about 15 minutes. Imagine how it would be when I need to make several calls in a day.
I have searched the forum for tips on improving battery life but the main suggestions seem to say that I should disable HSDPA and 3G but one of the main functions of the phone is internet usage and I don't see why I should how to switch to manually putting these settings on and off each time I want to use the internet, just so I can get a longer battery life - the battery should be able to cope with moderate usage!
Does anyone have any further suggestions?
Thank you
Look for an application called 'Bandswitch', it can disconnect idle connections. THis way 3G won't be enabled when you don't need it, should save some battery.
Disable automatic screen brightness and set it to something like 30%.
Disable location services and stuff.
Give the battery some cycles to reach full potential.
But of course, gaming, internetting and listening to music will drain the battery faster. It lasts about 2 days for me with moderate use (some internet, some playing around, etc) which is pretty fair imo.
dagrim1 said:
Look for an application called 'Bandswitch', it can disconnect idle connections. THis way 3G won't be enabled when you don't need it, should save some battery.
Disable automatic screen brightness and set it to something like 30%.
Disable location services and stuff.
Give the battery some cycles to reach full potential.
But of course, gaming, internetting and listening to music will drain the battery faster. It lasts about 2 days for me with moderate use (some internet, some playing around, etc) which is pretty fair imo.
Click to expand...
Click to collapse
I'll give that a try. So will it automatically enable it when I start browsing the internet or something?
I already changed the screen brightness and disabled location services though. That didn't seem to make a big difference.
And how much difference does giving the battery some cycles make?
Thanks.
dagrim1 said:
Look for an application called 'Bandswitch', it can disconnect idle connections. THis way 3G won't be enabled when you don't need it, should save some battery.
Click to expand...
Click to collapse
Sorry, but it doesn't work that way
Bandswitch can definitely do 2 things- it can disconnect idle connections, which will reconnect when needed, but this won't switch the transport between 3G and GSM, and has little effect on battery life
Or it can be used to manually change between 3G and GSM, using whichever is selected for its current transport and then autodisconnecting if required. It is the action of switching to GSM which has the most impact on battery life, but there is no way to switch automatically between to 2 as it needs a phone radio off/on to execute the switch.
Poor 3G signal conditions will hammer the battery because the phone will continually hunt for the strongest signal and switch constantly between modes. If your 3G signal is less than 2 bars I'd suggest switching it to GSM until you are in a stronger signal area. Do this by going to Phone/Menu/ then scroll down to Band and from there switch between Auto and GSM. If that makes a difference then you could install a small utility to make the switch easier to access.
seems very odd, mine was fully charged around 11pm last night, have sent around 20 texts, 20 mins calls, had wifi on, done some browsing, abit of sat nav and its on 68% 20 hours later.
I get at least 24 hours with moderate use. Most of the time i get around 30 hours.
I have weather and peep updating automatically + email retrieval at every hour.
When I first got mine it was lasting less than 12 hours too.
Now I'm on ROM 1.61 and have the following settings:
HSDPA disabled
Weather update every 3 hours
Twitter updates ever 1 hours (though it actually only updates when I scroll to the Peep tab)
Facebook auto updates - Off
Stock auto updates - off
Bluetooth and Wifi off unless needed.
Screen brightness - 30%
Haptic feeback, Vibration - off
Push Email - On
I'm getting over 24 hours of life out of a full charge now. I have got the push email set to manual updates only during off-peak hours ie when I'm sleeping. During the night the charge drops around 1% per hour. It was at 47% when I went to sleep last night and was 40% when I woke 7 hours later. This seems to be typical overnight drop for me.
Over my first few days of tinkering and setting up I found the battery drain to be massive. Once you settle down to regular usage it is a lot lot better.
However, just to be careful, I do now have a desk cradle at work so I can charge my phone if I have to.
Prior to my most recent hard-reset I found that if I left the phone in stand-by over night, with it checking for email every 5 minutes, and weather every 15 minutes, the battery would go from 100% to zero in less than nine hours. And that's without using it at all! As an experiment I tried turning off everything that could possibly be using the data connection, and turning off 3G, so nothing was running at all except the phone in 2G mode listening for calls and texts. It still burned 20% of the battery overnight in stand-by.
Since doing a hard reset, if I repeat the second experiment then I find that overnight battery drain is now only 4% - so clearly some piece of software that I had installed prior to the reset was hammering the battery even in stand-by. Quite what it was, I'm not sure yet. (My current prime suspects are the task manager and 1% battery status icons).
If you're having battery drain issues then I suggest doing a hard-reset and then not installing anything remotely controversial for a day or two to see if that sorts out the drain. If it does, then you can start reinstalling things gradually to see what difference each one makes.
NeilM said:
Sorry, but it doesn't work that way
Bandswitch can definitely do 2 things- it can disconnect idle connections, which will reconnect when needed, but this won't switch the transport between 3G and GSM, and has little effect on battery life
Or it can be used to manually change between 3G and GSM, using whichever is selected for its current transport and then autodisconnecting if required. It is the action of switching to GSM which has the most impact on battery life, but there is no way to switch automatically between to 2 as it needs a phone radio off/on to execute the switch.
Poor 3G signal conditions will hammer the battery because the phone will continually hunt for the strongest signal and switch constantly between modes. If your 3G signal is less than 2 bars I'd suggest switching it to GSM until you are in a stronger signal area. Do this by going to Phone/Menu/ then scroll down to Band and from there switch between Auto and GSM. If that makes a difference then you could install a small utility to make the switch easier to access.
Click to expand...
Click to collapse
Oh, I misunderstood it then... thank you for clearing that up!
It's very interesting, to see the number of people who have battery draining problems. I have the french SFR ROM 1.44 and since the beginning found my battery life satisfying (I didn't expect long life, as my wife has to charge her iPhone every night).
My battery lasts in heavy use 24h (though it can go down to 18h when using internet by 3G/HSPDA for long period like 1h or more) and under "normal" daily use (checking e-mail regularly, 20 min phone calls, sending some SMS, 30 mins internet, 45 mins playing around / listening some music) around 1.5 days.
My settings are:
3G/HSDPA enabled
Weather update every 6 hours
Stock auto updates - every 8 hours
Bluetooth and Wifi off unless needed
Screen brightness - auto
Haptic feeback, Vibration - off
E-mail check: every 2 hours (POP3)
Faulty batteries? I think not....
Whilst I'm a master of google searching, I get worse results using the search facility on this forum than just using intuition.
Anyway, I just wanted to add my comments on battery life after owning a stock 1.43 phone from Vodafone UK. I was getting less than 8 hours life with everything on auto and making just a couple of shortish phone calls and a couple of quick browses. The rest of the time I was in standby and I thought that my phone was one of the worst out there. I had also installed Skype which I had running in the background which sometimes causes the phone not to go into auto-standby even though it would dim normally. I also noticed that I was in a very weak signal area and that my phone was constantly switching between 2G/3G/H which I understand can consume a lot of power. Also, I had stopped using wi-fi to see if that helped.
After reading a million threads, I decided to conduct an experiment last night. Usually if I charge the phone before going to sleep for 8 hours it is down to 70% when I wake up having been left in standby. So last night I disabled everything. Turned off 3G, data connections, My Location, Weather update, Stocks Update, FaceBook login, e-mail updates, Skype, bluetooth, wifi. In fact absolutely everything I could find that could be turned off except the basic 2G phone itself.
Guess what, I wake up 8 hours later... 96%.
16 hours later.... 81% with very light use.
Now I'm going to have to spend many days playing around with different settings to see which apps or functions are gobbling the power. I have a nasty feeling that the weak signal is half the problem
So cheer up! It's not ideal, but this is a brand new, smartfone with bugs - not a Nokia 6110. Higher capacity batteries and ROM updates will come. In the meantime you just have to figure out what is sucking up the juice on your HD2 and disable these functions if you don't need them or when you are not using them.
Good luck and enjoy it! The coolest phone around...
Rickster
Donations appreciated (That incompetent government and those reckless banks put me out of busines...)
Hello everyone,
like the majority of the owners of HD2, in order to optimise the duration of accumulator charge, I use Band connection control programs , to pass in 3G only when it is necessary. Thus, I have:
- phoneAlarm: to force the 2G mode the night, and also for differ quiet mode if I am in meeting, etc…. In particular, in the case which interests me there, I force the 2G the night and asks to pass to 2G the morning.
- WMlonglife (version for HD2): which normally loads himself to make the effective switch 2G towards 3G or 3G+ if an application program requiring it is launched, and otherwise to remain in 2G. It should be noted that WMlonglife has two applis, one for the configuration, and to make manually changes 2G 3G, WMbandswitch.
- recently, I tested Bandswitch v2.8
I meet the following phenomena, and I would like to know if others also have them, and/or if there are parameters to change so that it goes better.
Point A: Already some question about the icons of the bar of state in top.
There are always two icons side by side. Tell me if I interpret them well.
one with a letter: G= GSM, E= Edge, 3G = 3G, H = 3G+
This letter tellsonly that this kind of network is available, but it does not say that one is actually connected there. Is it well that?
To know in which mode one is actually connected, it is another icon, on its line, with the 1 to 4 bars of reception and a small letter, which should be looked at.
This small letter, it is “H " ==> connected in 3G+, “3G” ==> connected in 3G, “E” ==> connected in Edge
and finally a simple antenna, which I imagine wants to say that one is just connected in 2G, no data connection
Is what all that is correct?
Is there another mean of knowing in real-time the current mode of connexion (and thus mode of conso of the accumulator)?
Point B, use of Phonealarm:
like said in introduction, I force the 2G (mode GSM/GPRS) during the night, and to 6:00 of the morning, I pass it in mode “house” where I put “Car”, by also putting the pin number at it, because it seems that for this transition, one needs the pin number (is it the radio cycle on-off?)
There, the first thing, they is that every morning, when I unlock it I find myself with the screen for input of the pin number, where it is enough to make cancel (because the code already entered via PA and even already connected). Moreover, if one tries to enter a pin number, then he refuses the input.
on the other hand, at this time, the telephone seems to remain in Edge icon “E”, and does not pass in H. On the other hand, so there I reset, then he will connect to H with the boot
Have you also this history of pin number?
For hangs, it is as if WMlonglife did not take the hand to force a 3G mode or 3G+….
this brings me to the point C
Point C: WMbandswitch… after a software reset, my Tel. is connected automatically towards the 3G network (or 3G+) of orange. On the other hand the morning (after to automatic wake up through PA), it remains in E. When I test action manually a passage in 3G with WMbandswitch, it does not change anything. I tested with radio operator chip on Samsung, or Qualcomm (WCDMA). similar behavior….
To check out, I then loaded and installed Bandswitch 2.8, and tried to change into 3G, and there I see appearing the letter H. so, there is a difference with WMlonglife, which would seem to show that WMlonglife does not manage to make the switch towards 3G.
Which radio chip put in WMlonglife?
Have you to it even thing?
Poind D: use of bandswitch 2.8 (on xda): I tested. Hard to know if that is interfaced well with all the remainder. Of your experiment, which one would you advise? It does not have the system of “whitelist” like WMlonglife…
Here is, in synthesis, to summarise my questions
- Has: major significance of the icons
- B: phonealarm and switch of the 3G mode (after a forcing in 2G the night)
- C: WMbandswitch, and configuration/use for HD2
- D: alternative to WMlonglife?
For info, with normal use of browsing, email and phone, I drop of about 50% battery for 24h, that is not so bad, but I 'd like to make sure about the Bandswitch thing...
Thank you in advance for all…
vdelab

What's the best battery settings for stock rom?

I keep seeing all these threads about how people are getting rediculous hours on 1 charge, but mostly all the post I see are people with rooted phones. What are the best ways to increase battery live on a epic with stock rom?
Those crazy battery life u see is ppl putting their phone in airplane mode and with very limited use. They don't mean anything. But some tips to improve batt life are keep screen brightness down, turn off 4g when not in use, maybe use juice defender to automatically turn off 3g whenever the screen is off.
Sent from my Epic 4G
I'm 100% stock, unrooted.
Turned off Auto-Sync
Brightness set to auto
Wifi on, since I'm usually within range of work or home wifi
Swapped Wifi policy to never drop when asleep. (prevents wifi from dropping and going to 3g)
Killed that absolutely stupid DRM process
Activate Airplane mode after initial boot and turn it back off. (Due to Samsung bug)
Have any program that syncs set to sync at 2hr intervals
My battery life with heavy usage will last over 6 hours (games, txts, browsing, app downloading). With moderate usage it usually can go 15 hours (sans app downloading), and with light usage I've pushed it 2 days (games and txts).
Mind you I don't use the browser much since 90% of my day is in front a PC, Mon-Fri.
I'm 100% stock, no root as well.
1.Train your battery!
when I got my phone I did at least 3 full charge/complete discharge cycles
2.I do not use any Task Killers or JuiceDefender (tried and uninstalled for ineffectiveness), I just use built in tool to monitor running programs and kill off the one I do not need. I prefer not to install application that do not have clean exit programmed. I do use JuicePlotter to monitor battery charge/discharge.
3. After each reboot toggle airplane mode on and off(Airplane trick)
4. Go to Menu/Settings/Applications/Running Services and shut down all services that not needed (DRM, MediaHub, etc)
5. Set brightness to minimal possible value (works fine for me), not auto set - when I need it on the street just slide the finger across the status bar and raise the level as needed.
6. All 4G, GPS, Wi-Fi are off and on only when needed. I use Wi-Fi home, 4G at work, rest of the places 3G or whatever is available. My data/sync is always on. Wi-Fi set to never sleep.
7. I have Roaming Guard off since my house in the very poor reception area so it's roaming most of the time but there is wi-fi for data.
8. Use dark background/wallpaper (I use Star Wars light speed jump live wallpaper)
IMO the battery life is depend on the type of use. From my 2 month experience the following battery killer tasks are:
1.Streaming video, music with screen on (will discharge the battery even when plugged in.
1a.Streaming music with screen off.
2. I haven't tried tethering (hot spot mode) but would think it's a killer as well
3. Browsing web, especially over 3G
4. Roaming
5. Game playing.
6. GPS
Obviously you can have a bad (defective) battery, but it's likely less then 1%.
Good luck!
nikon120 - What do you consider moderate? I consider my usage to be moderate, but I can't go 15hrs. Yesterday after fully charging the phone from mid point, my phone completely died after 5hrs, with very light usuage as most of that time I was busy. Today with light to moderate usage, my phone is indicating that it needs to be charged at roughly hr 10.
stud_muffler - I'm not familair with this airplane trick you're referring to. Can you enlighten me?
I'm doing most of the things suggested in this post, but I still don't think the battery usage I'm getting is up to par. The battery life on my Epic is much worse then what I was getting on my WinMo TP2, with roughly the same amount of usage.
noreboy said:
stud_muffler - I'm not familair with this airplane trick you're referring to. Can you enlighten me?
Click to expand...
Click to collapse
After you reboot the phone press and hold Power button until it buzz.
Menu will appear.
Select and touch Airplane Mode option. It will turn off all radio and show plane icon in the status bar.
wait few seconds and repeat to turn radio on.
that's all.

Best way to increase battery life...

This isn't a thread for when your battery drain is excessive on standby, this is a thread dedicated to figuring out how to simply get more power to the phone for extended runtime.
I'm using a 5000 mah external battery pack for extra charge, and it seems to be good enough to last me at least an extra day or two of usage, which is great. It seems like the only other options are cutting up the battery door to fit an extended battery from the evo 3D or just carrying extra batteries...
Best easy change for me was always using wifi instead of the network when at home and work. Made a huge improvement
Hunt3r.j2 said:
This isn't a thread for when your battery drain is excessive on standby, this is a thread dedicated to figuring out how to simply get more power to the phone for extended runtime.
Click to expand...
Click to collapse
So....how to get the most time out of your battery in standby?
As you've allready said:
One of the biggest improvements is possible by using a Sensation or Evo3D battery. With that i get a nice 1% per hour in standby. (It's actually a bit lower than 1%).
While not using the phone it's unnessecary to have 3G activated. Recieving emails and texts via whatsapp, viber etc via 2G is good enough. For everything that is more datahungry you can allways activate 3G manually.
Keep background data turned off. I use K9 Mail which works independently and Whatsapp recieves messages too. But a lot of other stuff doesn't syncronize which means less wakelocks and thus less power consumption.
Same with locations. As long as you don't WANT to tell google your every step you can keep network based location turned off.
If you need a location fix quickly you can allways turn on gps for a moment. After using the FasterFix app (i guess you need root for that), i get a gps lock in 5 seconds, so i can determin my location really fast and share it with others (for intance via whatsapp) without having to keep it on all the time.
And last but not least:
You probably don't need to know the current outside temperature every 5 minutes. So set that to manual update too.
Doing these things doesn't turn my smartphone into an overweight dumbphone with a battery problem and i get a maximum of over 4 days of standby time out of it.
Normally my battery holds for roughly 35 hours (1 day and 11 hours), but it's usually awake for 1/4th of the time serving as my newspaper and video and mp3 player.
/edit:
Totally forgot:
Use llama!
You'll never have to worry about forgetting to set your phone on vibrate while at work and setting it to loud at home.
You can configure it so it only activates wifi at home and turns it off again if you didn't connect to any access point after a set amount of time. I haven't had to activate/deactivate wifi manually for ages without having to worry about it constantly searching for networks and sucking my battery dry!
What he said
Dlog said:
So....how to get the most time out of your battery in standby?
As you've allready said:
One of the biggest improvements is possible by using a Sensation or Evo3D battery. With that i get a nice 1% per hour in standby. (It's actually a bit lower than 1%).
While not using the phone it's unnessecary to have 3G activated. Recieving emails and texts via whatsapp, viber etc via 2G is good enough. For everything that is more datahungry you can allways activate 3G manually.
Keep background data turned off. I use K9 Mail which works independently and Whatsapp recieves messages too. But a lot of other stuff doesn't syncronize which means less wakelocks and thus less power consumption.
Same with locations. As long as you don't WANT to tell google your every step you can keep network based location turned off.
If you need a location fix quickly you can allways turn on gps for a moment. After using the FasterFix app (i guess you need root for that), i get a gps lock in 5 seconds, so i can determin my location really fast and share it with others (for intance via whatsapp) without having to keep it on all the time.
And last but not least:
You probably don't need to know the current outside temperature every 5 minutes. So set that to manual update too.
Doing these things doesn't turn my smartphone into an overweight dumbphone with a battery problem and i get a maximum of over 4 days of standby time out of it.
Normally my battery holds for roughly 35 hours (1 day and 11 hours), but it's usually awake for 1/4th of the time serving as my newspaper and video and mp3 player.
/edit:
Totally forgot:
Use llama!
You'll never have to worry about forgetting to set your phone on vibrate while at work and setting it to loud at home.
You can configure it so it only activates wifi at home and turns it off again if you didn't connect to any access point after a set amount of time. I haven't had to activate/deactivate wifi manually for ages without having to worry about it constantly searching for networks and sucking my battery dry!
Click to expand...
Click to collapse
Exactly what he said, but you can automate a lot of it by using an app called Tasker. I use it to sync all data on my phone for 3 minutes every 4 hours so it's always up to date. It can also automate the GPS on/off depending which app I use so it switches on when I open CoPilot and turns off again when I close it.
Tasker can also replace Llama if you can find 'profiles. to do it. Llama looks pretty good though.
I think the biggest drain is the display. With auto brightness on, the sensor will monitor the changes in your surrounding every second the moment you turn on the screen. Turn that off and manually control the brightness save a lot of battery.
Or just use lower autobrightness script.
I use Invisibright. Long hold on search softkey + slide enables me to set the brightness to whatever I want in a second no matter what apps are running.
Hunt3r.j2 said:
Or just use lower autobrightness script.
Click to expand...
Click to collapse
It is still useless as your sensor is still working every time you turn on your screen. The sensor is draining your battery. Not the brightness value.
Autobrightness sensor drain
So you think that there is a greater drain from the light sensor than from an uncontrolled screen brightness?
Interesting thought. I'll manually set my brightness level a round20% for the next charge cycle and see what effect it has, though I suspect that as my display currently accounts for 20% of battery drain it won't make all that much difference.
I use juice defender and I think its actually working.
Sent from my Inspire 4G using XDA

[Q] Phone doesn't go into deep sleep + wifi always stays on

This is very annoying, I have spent the whole morning trying to find a solution for this issue. The battery runs out already fast as it is, and now the phone is not
Battery drained about 20% at night by itself. Currently draining about 1-2% per 5 minutes when idle. What do I do? I have looked on various different threads for a solution, but did not find anything to fix this issue.
How do I fix this?
Thanks, in advance.
Also some details.
I had my phone at home, I prefer the phone to use WiFi networks when syncing and updating, but to have phone turn them automatically off when not using them, that is when the phone is locked and not syncing and updating anything. But apparently it doesn't do that, it has WiFi on at all times for some reason. And I don't know if its related to WiFi, it doesn't appear to go to "deep sleep"
Yukicore said:
This is very annoying, I have spent the whole morning trying to find a solution for this issue. The battery runs out already fast as it is, and now the phone is not
Battery drained about 20% at night by itself. Currently draining about 1-2% per 5 minutes when idle. What do I do? I have looked on various different threads for a solution, but did not find anything to fix this issue.
How do I fix this?
Thanks, in advance.
Click to expand...
Click to collapse
Yukicore said:
Also some details.
I had my phone at home, I prefer the phone to use WiFi networks when syncing and updating, but to have phone turn them automatically off when not using them, that is when the phone is locked and not syncing and updating anything. But apparently it doesn't do that, it has WiFi on at all times for some reason. And I don't know if its related to WiFi, it doesn't appear to go to "deep sleep"
Click to expand...
Click to collapse
For me, it was the last Google Maps update. Try to disable "Reporting Location" and "Location History" under Location settings on Google Settings app(the one with the green icon). I had around 25% drain over night and half of it came from this.
Try it and see if this can help you.
:fingers-crossed:
Like above say, disable location, especially if you keep wifi on.
Leaving wifi on while sleeping itself is not good for our health anyway, so if you have data switch to 2G, its at least enough to keep internet messages coming while saving battery. And if its wifi wise, apply pm.sleep_mode=1 in your build.prop. AND, scroll up a little, wifi_supplicant_can_interval(something like that, from its SHOULD BE 15 change to 300-600).
Disable unused apps and use greenify.
Galaxo60 said:
For me, it was the last Google Maps update. Try to disable "Reporting Location" and "Location History" under Location settings on Google Settings app(the one with the green icon). I had around 25% drain over night and half of it came from this.
Try it and see if this can help you.
:fingers-crossed:
Click to expand...
Click to collapse
Thank you for the answer, but sadly it didn't seem to do it. My WiFi is still always on, even though I have it set to turn off when phone is sleeping at WiFi advanced settings.
Although the phone entered deep sleep mode when I manually turned WiFi off, but I'm not sure if that was the case.
KiD3991 said:
Like above say, disable location, especially if you keep wifi on.
Leaving wifi on while sleeping itself is not good for our health anyway, so if you have data switch to 2G, its at least enough to keep internet messages coming while saving battery. And if its wifi wise, apply pm.sleep_mode=1 in your build.prop. AND, scroll up a little, wifi_supplicant_can_interval(something like that, from its SHOULD BE 15 change to 300-600).
Disable unused apps and use greenify.
Click to expand...
Click to collapse
I understand, but I forgot to do so, I actually have an app that turns on air plane mode at certain time. But that still doesn't fix the issue that the phone doesn't enter sleep mode with WiFi on and doesn't turn it off, even though it's set to do so.
Also I did not quite understand what you were telling me there, as I got the phone last week and it's my first android phone. The app you suggested could cut it, but that means that whenever there will be an auto check for news sequence I will be downloading it with mobile data? Is there an app that could cause this?
I was about to update on this, but I just got notification about 4.3 update. :laugh:
I will update this post, if this problem still exists.
UPDATE : Of course, still the problem persists, Phone goes to sleep when I have Wi-Fi turned off. But when on, even though I have it set to turn off during sleep mode, it keeps the phone wake and drains the battery.
Restart your router?
Sent from my Nexus 4 using Tapatalk 2
Ulver said:
Restart your router?
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
How is it related to my router exactly? My iPod disconnects from Wi-Fi no problem.
Thank you for trying though.
I had left my phone this night with Wi-Fi off, but mobile data and 3G was on, Lost 7% in 7Hours from 47%. Does this seem okay, or a little bit too much? By the time I answered 2 emails and made 1 short phonecall and checked on battery logs from 2 different apps, and changed my wallpaper, battery has dropped to 33%. I'm not proud.
The answer to your problem is JuiceDefender Ultimate, available from Play Store.
Yukicore said:
I had left my phone this night with Wi-Fi off, but mobile data and 3G was on, Lost 7% in 7Hours from 47%. Does this seem okay, or a little bit too much? By the time I answered 2 emails and made 1 short phonecall and checked on battery logs from 2 different apps, and changed my wallpaper, battery has dropped to 33%. I'm not proud.
Click to expand...
Click to collapse
Unfortunately this is normal, the battery life is not the best feature of nexus 4. How many screen on time hours do you get averagely?
This fixed the Wifi always on issue for me.
Turn WiFi on: Settings, WiFi, Menu (3 dots upper right hand corner), advanced, uncheck scanning always on.
Hope this helps.

Heavy Standby Drain in Airplane Mode with WiFi-Calling

Can someone confirm if this issue exists on their device?
I live in an area with no cell service so I put my device in airplane mode and use WiFi Calling. This worked great for my OnePlus 5T. Now with my 6T I get very heavy battery drain when I do the same. Somewhere between 2 and 4 percent an hour. If I have good cell reception and airplane mode off I don't get any standby drain, like it should be. I have attached a screenshot of the drain while my phone was in standby. The red boxes highlight when it was in airplane mode with WiFi Calling.
I would like to figure out if it is just my device with the issue or if everyone is affected. I am on MetroPCS if that makes any difference.
Trying to figure out if this has to do with Magisk, or maybe my DTIM and Beacon intervals I set in my router. No apps are holding wakelocks, phone is active less than 5% when screen off. I will factory reset if a few people state that they do not have this issue.
Can someone reproduce these steps and let me know if you get heavy standby drain?
1. Enable WiFi Calling.
2. Turn airplane mode on.
3. Turn WiFi back on.
4. Make sure you are connected to WiFi Calling.
5. Check current battery level.
6. Turn screen off and leave phone for an hour or more.
7. Check to see if battery went down more than 1%.
Thank you!
In case anyone else has this issue it seems that the heavy drain was due to a DTIM interval of 50 that I had set on my access point. Setting it back to the default of 1 seems to have stopped the heavy standby drain.
I was thinking of buying a OP6T and using WiFi calling as I have no cell/4G coverage at home to try and avoid standby drain issues I have had with previous android phones. Stupid question, why do you need to enable aeroplane mode? Does the phone not switch automatically to WiFi calling when it finds no cell signal like iPhones do? Surely forgetting to turn off aeroplane mode causes problems. What are your experiences in general with WiFi calling on this phone? What sort of battery drain are you looking at overnight using WiFi calling? Do you have any other tips for minimising standby drain when you have no cell coverage?
Percy247 said:
I was thinking of buying a OP6T and using WiFi calling as I have no cell/4G coverage at home to try and avoid standby drain issues I have had with previous android phones. Stupid question, why do you need to enable aeroplane mode? Does the phone not switch automatically to WiFi calling when it finds no cell signal like iPhones do? Surely forgetting to turn off aeroplane mode causes problems. What are your experiences in general with WiFi calling on this phone? What sort of battery drain are you looking at overnight using WiFi calling? Do you have any other tips for minimising standby drain when you have no cell coverage?
Click to expand...
Click to collapse
I enable airplane mode to prevent the phone from draining looking for cell service that it will never find. It will automatically switch to WiFi-calling but it will still constantly scan for cell signal just wasting battery, all phones operate like this.
Wi-Fi calling works great for this phone. The only issue I have is that MMS for T-Mobile/MetroPCS does not work. Calling and SMS work 100%.
I usually loose between one and three percent batter overnight (about six to eight hours) with airplane mode on with Wi-Fi on and Wi-Fi calling connected.
To minimize standby drain with no cell service just put your phone in airplane mode and then turn Wi-Fi back on so that Wi-Fi calling connects. This tip would work with pretty much every phone.
I hope this helped!
Thanks for the information. Did WiFi calling work automatically on your phone or did you have to contact your airtime carrier to set it up? Can you please confirm that with aeroplane mode on you can make/receive phone calls and send/receive sms messages. I need to stay in touch and have good battery life, not one at the cost of the other. I don’t really send mms messages so that is not a problem. What is the DTIM interval you mention on your router/AP and how does this affect the phone? I will be choosing between OPT6 and the P20 Pro and I am concerned about brightness levels on OPT6 as screen seems very dim. I understand google has made changes to the brightness slider in android Pie but I had to have the brightness at 100% where normally it would be at about 50-60% on other phones. Is this something you find a problem or does the adaptive brightness learn your habits?
Percy247 said:
Thanks for the information. Did WiFi calling work automatically on your phone or did you have to contact your airtime carrier to set it up? Can you please confirm that with aeroplane mode on you can make/receive phone calls and send/receive sms messages. I need to stay in touch and have good battery life, not one at the cost of the other. I don’t really send mms messages so that is not a problem. What is the DTIM interval you mention on your router/AP and how does this affect the phone? I will be choosing between OPT6 and the P20 Pro and I am concerned about brightness levels on OPT6 as screen seems very dim. I understand google has made changes to the brightness slider in android Pie but I had to have the brightness at 100% where normally it would be at about 50-60% on other phones. Is this something you find a problem or does the adaptive brightness learn your habits?
Click to expand...
Click to collapse
WiFi calling worked right away with my phone provider, MetroPCS. All I had to do was use their app to set my E911 number for emergency purposes, I am in the US by the way. Some carriers may have to contact their support to enable the feature for your account, I cannot say for any other carriers than MetroPCS.
I can confirmed that airplane mode with Wi-Fi calling works 100% for calling and SMS. The MMS issue seems to just be an issue with the US carriers T-Mobile and MetroPCS from what I have seen. Just make sure you turn Wi-Fi back on after enabling airplane mode.
You can look up what the DTIM interval is on Google if you are interested in it. Basically its how often the router will include a message to wake up the Wi-Fi on your phone to process messages. I had mine set to 50 or 100 beacon intervals and that was causing high standby drain. Pretty much every router defaults that setting to one so you shouldn't have to worry about that. I currently have mine set to three with no issues.
As for the brightness slider it works great for me. I think it's a little on the right side most of the time, some people say it's too dark sometimes, it's all subjective to the person and how they use their phone. Personally I think the new brightness slider is a huge improvement over the old versions. You have a lot more control of the brightness at lower levels so you are able to better set your phone in low light environments. Also the screen gets plenty bright at 100%. I have not had issues using my phone outdoors in bright sunlight. As for learning your habits with the brightness, it does seem to do that to some extent but don't expect it to be magically right all the time.
Thanks very much for all your help. Have a great New Year.

Categories

Resources