OK, I just wanted to know if this was just me...
When drawing, especially when doing a long quick stroke with the pen, i will sometime get a bit of a .... squeak. Like the pen is scratching or rubbing against the screen. It doesnt happen very often, just on occasion..
I dont seem to be causing any scratches though... no damage seems to be done.
So I can only assume its the material of the SPen?
I never had this happen with my old note10.1, using the white tips that came with the pen. This pen seems to only come with th eblack tips though, with no alternative choices.
Unfortunately I had to sell my old note10.1, so I dont have the pen available to test on this screen.
Anyone else having this issue? OR maybe I should buy an alternate pen?
Any advice would be good thanks!
nirurin said:
OK, I just wanted to know if this was just me...
When drawing, especially when doing a long quick stroke with the pen, i will sometime get a bit of a .... squeak. Like the pen is scratching or rubbing against the screen. It doesnt happen very often, just on occasion..
I dont seem to be causing any scratches though... no damage seems to be done.
So I can only assume its the material of the SPen?
I never had this happen with my old note10.1, using the white tips that came with the pen. This pen seems to only come with th eblack tips though, with no alternative choices.
Unfortunately I had to sell my old note10.1, so I dont have the pen available to test on this screen.
Anyone else having this issue? OR maybe I should buy an alternate pen?
Any advice would be good thanks!
Click to expand...
Click to collapse
Mine is white but it comes with 2 kinds of tips...look closer at the extras...should be plastic ones and rubber ones...mine came with a rubber tip on and 3 extra rubber and 2 plastic tips.
Uschiekid said:
Mine is white but it comes with 2 kinds of tips...look closer at the extras...should be plastic ones and rubber ones...mine came with a rubber tip on and 3 extra rubber and 2 plastic tips.
Click to expand...
Click to collapse
my original note came with those... my 2014 one just came with several replacement black tips, no white ones...
nirurin said:
my original note came with those... my 2014 one just came with several replacement black tips, no white ones...
Click to expand...
Click to collapse
What I meant was I have a white note...not black...so nothing is black...pen and tips are all white...to match the device itself. But if you have black tips, im assuming your note and pen are black. What I was trying to say was that amongst those black tips, there might be two types that arent as visibly different as the white tips are,...so I was advising you to look more closely or try to feel for a difference
Uschiekid said:
What I meant was I have a white note...not black...so nothing is black...pen and tips are all white...to match the device itself. But if you have black tips, im assuming your note and pen are black. What I was trying to say was that amongst those black tips, there might be two types that arent as visibly different as the white tips are,...so I was advising you to look more closely or try to feel for a difference
Click to expand...
Click to collapse
Oh i see... I did try swapping tips at one point, but only because I assumed they were all the same!
On the original note, it came with 4 white rubbery tips and 4 black plastic tips... I didnt think tha there might be a difference in these tips cos they were all the same colour... I will take a closer look
nirurin said:
Oh i see... I did try swapping tips at one point, but only because I assumed they were all the same!
On the original note, it came with 4 white rubbery tips and 4 black plastic tips... I didnt think tha there might be a difference in these tips cos they were all the same colour... I will take a closer look
Click to expand...
Click to collapse
Oh I didnt realise the original note had such obviously different tips....
yeah, the white note has rubber ones that are very opaquely white and plastic ones that are slightly translucent but still white.
Uschiekid said:
Oh I didnt realise the original note had such obviously different tips....
yeah, the white note has rubber ones that are very opaquely white and plastic ones that are slightly translucent but still white.
Click to expand...
Click to collapse
The Grey note comes with 6 completely indistinguishable dark-grey tips lol
But, if you push on the ends with a fingernail, you can tell that 3 of them are slightly rubbery, and 3 are solid plastic.
Though I preferred the rubbery ones on the original note, I am going to try a plastic one now. ITs a lot smoother on the screen, and you can definatly notice the lack of resistance, but it seems to be pretty good. And no squeaks haha.
I had heard rumours on the old note that the plastic tips could scratch the screen, but I'm pretty sure they were false...
This is my current set-up for drawing and painting on my note...
I use rubber tips (i'm using the aftermarket SPen with the eraser on the other end, not the SPen that came with the tablet) with a matte screen protector over my screen. The screen protector isn't for preventing scratches (although it helps) but to create the proper amount of friction i feel comfortable with. I do like the plastic tips better but from my experience they tend to get sharp edges from normal wear and tear.
nirurin said:
I had heard rumours on the old note that the plastic tips could scratch the screen, but I'm pretty sure they were false...
Click to expand...
Click to collapse
I can't see how plastic could scratch the screen :/ however I do remember reading where people got something stuck on the tip of their s-pen and whilst using it they ended up scratching the screen. Main reason why I had to place a clear screen protector on mine just incase it happens and tbh the Anker screen protector is as though there's nothing there so it helps.
Sorry for bumping this old thread but I dont want to create a new one.
My Note 2014 came in without extra tips. And the one I have is plastic and got no traction. I'm wondering where I can buy a rubber tip and replacement tool.
Tnx.
Screen protector
It might not be the tip at all. It could be the screen protector or lack of one.
The note 2014 extra tips are buried in the box it Came in. If you Kept the box, go and look. They are in a tiny zip lock bag.
jonling said:
It might not be the tip at all. It could be the screen protector or lack of one.
Click to expand...
Click to collapse
Tried it without protector, with a glossy and now a matte one and it got really minimal traction. A friend of mine got an spen with rubber tip and it feels better writing and drawing. At least for me.
jherring002 said:
The note 2014 extra tips are buried in the box it Came in. If you Kept the box, go and look. They are in a tiny zip lock bag.
Click to expand...
Click to collapse
Lol! I got to check the box thoroughly. I just took the tablet and charger and forgot about the box. I'll check it again. Thanks!
Related
Okay so I ordered a back aluminium case on eBay.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220167294721
This case has exceeded my expectations. Only though....the LCD portion of the case is protected by a plastic cover where as.... I was expecting just a knockout like all the other parts of the aluminium. I still don't know, if this is a plus or not, because while it does protect the screen, I was hoping to at least use the touch screen while its in the case, but at least I know its fully protected. Another feature which made me just love this case even more was the fact that the belt clip could be screwed with the phone being inside, many other cases either have a fixed belt clip (clumbersom) or if you want to use the belt clip you have to screw on a disc, and prep it. With this case you can screw the disc in 2 seconds and do not need a screwdriver or any other tools, it's truly quick fit, screw on, screw off.
One note: the finish I ordered is BLACK which can be seen from the pictures, it also comes in Silver, now it has some sort or tactile finish to it, kind of that powder coated, scratch resistant feel. I don't think the Silver version will be like this, I am sure you will see the natural brushed grains of Aluminium. I still don't know if I should have hosen the Silver. I hate scratches and i figured Black doesnt show scratches and I like Black, although I do love Natural Aluminium too, but I was afraid of scratches and if it appeared cheep, luckily though I am giving one of these cases as a gift so I am going to order the Silver one and choose which one I like better and give the least as the gift.
In any case the powder scratch resistant coating on the Black version is awesome and If after a week I feel the plastic cover that protects the LCD prooves to be of a bother I think I will have to knock it out.
In the pictures you will NOT notice that there is a Plastic cover... I know I have said this numerous times, you may thank me alter on for warning you.
Another thing that impressed me was the box the case arrived in, and the cotton wrap the case was wrapped in... exactly how my Louis Vuitton wallet shipped, very impressed, they really paid attension to the details down to the box.
Join the crow here at the last few pages on the "pDair" wagon
http://forum.xda-developers.com/showthread.php?t=338676
I have to ask you about your 2nd pic showing the back side though ... what is that blueish frame around the camera area ???
It also looks to me that your device's back side is not of black colour to begin with ?? mine is a TyTN II & I don't have that ... it is totally black ...
Probably it's because your device is another variation of the Kaiser ??
BTW ... I also got the same black case arrived yesterday too
UnicornKaz said:
Join the crow here at the last few pages on the "pDair" wagon
http://forum.xda-developers.com/showthread.php?t=338676
I have to ask you about your 2nd pic showing the back side though ... what is that blueish frame around the camera area ???
It also looks to me that your device's back side is not of black colour to begin with ?? mine is a TyTN II & I don't have that ... it is totally black ...
Probably it's because your device is another variation of the Kaiser ??
BTW ... I also got the same black case arrived yesterday too
Click to expand...
Click to collapse
That blue part on the camera is just a protective film that is sometimes put on the silver panels to protect them from scratching. It is kind of like a sticker (but not quite so sticky), and it can be easily removed.
How heavy is it compared to the original one?
Regards,
Carty..
looks pretty good.. but does it make the power button harder to push than it already is?
njbridges said:
That blue part on the camera is just a protective film that is sometimes put on the silver panels to protect them from scratching. It is kind of like a sticker (but not quite so sticky), and it can be easily removed.
Click to expand...
Click to collapse
well that answer one thing ... but...
if you look at the back of that device ... it's silver or lighter colours exposed where the opening of the back are ( 4 shorts & 1 long lines ) ...etc
that made me thought of other variations of the device. Since I owned a black TyTN II, that's all I know to go by ... is it's completely black at the back ... not like the pic.
DVS_WiNdz said:
looks pretty good.. but does it make the power button harder to push than it already is?
Click to expand...
Click to collapse
it's actually easier since the new opening works like a guide now
can't miss it now !! lol
njbridges said:
That blue part on the camera is just a protective film that is sometimes put on the silver panels to protect them from scratching. It is kind of like a sticker (but not quite so sticky), and it can be easily removed.
Click to expand...
Click to collapse
lol
upon closer look of the 4th pic ( D-Pad & buttons )... I now realized that it's NOT a TyTN II after all
That is odd, its not blu its the same color as everyone elses, I have the T-Mobile version which is not black, its gunmetal but the camera plate, is the same color as your, somehow the flash caused a blue tint.
UnicornKaz said:
Join the crow here at the last few pages on the "pDair" wagon
http://forum.xda-developers.com/showthread.php?t=338676
I have to ask you about your 2nd pic showing the back side though ... what is that blueish frame around the camera area ???
It also looks to me that your device's back side is not of black colour to begin with ?? mine is a TyTN II & I don't have that ... it is totally black ...
Probably it's because your device is another variation of the Kaiser ??
BTW ... I also got the same black case arrived yesterday too
Click to expand...
Click to collapse
DVS_WiNdz said:
looks pretty good.. but does it make the power button harder to push than it already is?
Click to expand...
Click to collapse
Not really, but I prefer the Hermes (TYTYN) switches to the Kaiser anyday, I also miss the loss of that extra button next to the Power button.
UnicornKaz said:
it's actually easier since the new opening works like a guide now
can't miss it now !! lol
Click to expand...
Click to collapse
that is so funny man, I always used to miss it too feeling around, especially when it was in my car holder, I am so used to the Hermes (TYTN) that I am feeling around for a second before I find it.
BTW did anyone else have the problem of the sliding? If you owned a TYTN then you will knwo what I am talking about, the slide is in the opposite direction, it takes tiem to get used to.
hey does the front plastic shield bother you? Do you fidn youself forgeting tis there atempting to touch the screen lol
UnicornKaz said:
Join the crow here at the last few pages on the "pDair" wagon
http://forum.xda-developers.com/showthread.php?t=338676
I have to ask you about your 2nd pic showing the back side though ... what is that blueish frame around the camera area ???
It also looks to me that your device's back side is not of black colour to begin with ?? mine is a TyTN II & I don't have that ... it is totally black ...
Probably it's because your device is another variation of the Kaiser ??
BTW ... I also got the same black case arrived yesterday too
Click to expand...
Click to collapse
btw i do appologize for the new thread i didnt see the PDAIR listed on the other title.
UnicornKaz said:
Join the crow here at the last few pages on the "pDair" wagon
http://forum.xda-developers.com/showthread.php?t=338676
I have to ask you about your 2nd pic showing the back side though ... what is that blueish frame around the camera area ???
It also looks to me that your device's back side is not of black colour to begin with ?? mine is a TyTN II & I don't have that ... it is totally black ...
Probably it's because your device is another variation of the Kaiser ??
BTW ... I also got the same black case arrived yesterday too
Click to expand...
Click to collapse
So I was surfing on ebay for a rugged case for my n4
I ran by this...
http://www.ebay.com/itm/Triple-Armo...t=US_Cell_Phone_PDA_Cases&hash=item5d43674502
It seems like a ballistic sg knock off but at a lower price
comes with screen protectors too if that matters for anyone...
Does ANYONE have any experience with this case? If so, please let us know!
Otherwise I'm going to order a Ballistic SG this week.....
mc704 said:
So I was surfing on ebay for a rugged case for my n4
I ran by this...
http://www.ebay.com/itm/Triple-Armo...t=US_Cell_Phone_PDA_Cases&hash=item5d43674502
It seems like a ballistic sg knock off but at a lower price
comes with screen protectors too if that matters for anyone...
Does ANYONE have any experience with this case? If so, please let us know!
Otherwise I'm going to order a Ballistic SG this week.....
Click to expand...
Click to collapse
I would order that ebay one instead of the SG.
I had the SG and it wasn't worth the money. The problem with it is that the silicone isn't a perfect fit so the nexus 4 slides up and down a bit. The plastic piece that goes over the inner silicone cover occasionally comes undone a bit (it's hard to describe exactly) which leads to more sliding of the nexus. The plastic piece doesn't stay on as well as I'd hoped because the silicon is too soft to let it really clamp on well.
That ebay one is much cheaper and appears to be basically the same.
The case I have now and would really recommend is the mybatt. In addition to a back plastic clamp on piece, it also has a front screen side snap on piece so its inner silicon layer is sandwiched securely. I haven't had any sliding issues like I did with the Ballistic. Here's a review someone did on the mybatt: http://forum.xda-developers.com/showthread.php?t=2120148
It does come in a couple different colors. I have the all black one because I thought the white might get stained with dirt.
lazer155 said:
I would order that ebay one instead of the SG.
I had the SG and it wasn't worth the money. The problem with it is that the silicone isn't a perfect fit so the nexus 4 slides up and down a bit. The plastic piece that goes over the inner silicone cover occasionally comes undone a bit (it's hard to describe exactly) which leads to more sliding of the nexus. The plastic piece doesn't stay on as well as I'd hoped because the silicon is too soft to let it really clamp on well.
That ebay one is much cheaper and appears to be basically the same.
The case I have now and would really recommend is the mybatt. In addition to a back plastic clamp on piece, it also has a front screen side snap on piece so its inner silicon layer is sandwiched securely. I haven't had any sliding issues like I did with the Ballistic. Here's a review someone did on the mybatt: http://forum.xda-developers.com/showthread.php?t=2120148
It does come in a couple different colors. I have the all black one because I thought the white might get stained with dirt.
Click to expand...
Click to collapse
Thanks for your opinion!
I went ahead and bought it on Amazon through a third party for almost $6! (CHEAP price IMO) Ebay had it for 9 bucks :victory:
I read some reviews of it. It seems like people had a mix problem with the sensor cut out. Do you have any problems of your own or any cons you want to bring up?
mc704 said:
Thanks for your opinion!
I went ahead and bought it on Amazon through a third party for almost $6! (CHEAP price IMO) Ebay had it for 9 bucks :victory:
I read some reviews of it. It seems like people had a mix problem with the sensor cut out. Do you have any problems of your own or any cons you want to bring up?
Click to expand...
Click to collapse
I personally didn't have that problem. It seems to have mainly been on the first few versions of it that came out. People didn't mention that issue as much after it had been out for awhile. I just got mine about a month and it's been fine.
lazer155 said:
I personally didn't have that problem. It seems to have mainly been on the first few versions of it that came out. People didn't mention that issue as much after it had been out for awhile. I just got mine about a month and it's been fine.
Click to expand...
Click to collapse
just to follow up with this post...
My case doesn't have this problem either so if anyone is interested in getting the Mybat Tuff Case & doesn't mind the bulk. I highly recommend it!:good:
My ballistic case fits perfectly without problem but hey that one is cheaper
Sent from my Nexus 4 using xda app-developers app
I have the Ballistic case and it fits good. Mine doesnt slide around in the rubber part and Ive never had the plastic cover fall off.
I do wish Gumdrop made a N4 case though.
Does anyone know what the 5 little black plastic pins are for?
They seem to come with a basic metal clamp, but I've looked around and can't find a use for it?
Amdathlonuk said:
Does anyone know what the 5 little black plastic pins are for?
They seem to come with a basic metal clamp, but I've looked around and can't find a use for it?
Click to expand...
Click to collapse
They are replacements for the S-pen tip. You use the metal tweezer thing to pull out the pin and insert the new ones.
MohJee said:
They are replacements for the S-pen tip. You use the metal tweezer thing to pull out the pin and insert the new ones.
Click to expand...
Click to collapse
LOL.....how embarrassing.
Thanks!
Wacom (who are responsible for the Spen) has been using this system since the first Intuos to replace the pen tips on the pens of their drawing tablets...
You're not alone!
Amdathlonuk said:
LOL.....how embarrassing.
Thanks!
Click to expand...
Click to collapse
I couldn't figure it out myself, lol.
I think even less people know that the replacement pens are not all the same material. Some are more rubberized, while others are made of firmer plastic. So not only are they extra pen tips, but you can change them out if you want the pen motions to have more or less friction.
The only way I could tell the difference of material was by touching each tip and gently gliding my finger across it see how much friction it had. My default pen-tip was a more rubberized material with a little too much friction for my liking, so I swapped it for one of the harder ones and I love it!
PaulusGrandis said:
I think even less people know that the replacement pens are not all the same material. Some are more rubberized, while others are made of firmer plastic. So not only are they extra pen tips, but you can change them out if you want the pen motions to have more or less friction.
The only way I could tell the difference of material was by touching each tip and gently gliding my finger across it see how much friction it had. My default pen-tip was a more rubberized material with a little too much friction for my liking, so I swapped it for one of the harder ones and I love it!
Click to expand...
Click to collapse
That piece of information was so useful to know. Love the lesser friction tip!
I also got the note5 today and was looking at the clamp/pins and I was like " what the hell is this?" LMAO.
HAHAHAHAHA Thanks for asking this! I have been all over the web trying to figure out WTH it is!!! hahahaha
If you have the manual, you can read it.
Tapatalk on Note3
Same with Note 8 and bell shaped metal clamp
I got the Note 8 just now. The Singapore website doesn't even mention this bell shaped metal clamp and the set of pins as an accessory included in the box! I was completely flummoxed till I read this thread. Thank you.
My fiance and I originally tried to order the black Note 4s, but we could only order white at the time.
My white one was available last Thursday and all went smoothly but Best Buy made a mess of her
order so we ended up with a black N4 from Verizon for her. We then came up with the idea to swap
covers and we like the results. Now we're looking for clear cases that will accommodate the mic
holes on the Verizon N4 while still allowing us to appreciate our simple, yet beautiful & most likely not original
(though original to us) works of art.
PS I've never had a female share my taste in phones so this is the first time I've actually able to do
this. It's been a very bonding experience. LOLS! And she did not make me type this part.
I like it!
I'm doing the same but with a white spigen case on Black GN4.
I'm personally considering buying a gold frame to replace the black one once they are available on eBay.
Would be black with gold trim, very nice in my opinion.
Thanks! And you have good taste!
Poloasis said:
I like it!
I'm doing the same but with a white spigen case on Black GN4.
Click to expand...
Click to collapse
We may end up going your route after all as I hate not having a case on it (at least at first). Still uncertain which cases work for the Verizon model though.
Someone else has your taste in style!
holycow1 said:
I'm personally considering buying a gold frame to replace the black one once they are available on eBay.
Would be black with gold trim, very nice in my opinion.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=Ui6UfjOJ-IE
Exactly. Except this would cost ~$10 (we'll know once frames start getting sold on eBay).
yeah, I like white phone with black back!
holycow1 said:
I'm personally considering buying a gold frame to replace the black one once they are available on eBay.
Would be black with gold trim, very nice in my opinion.
Click to expand...
Click to collapse
The frame is replaceable? Seems like it would be a risky undergoing
Sent from my SM-N910V using Xparent Blue Tapatalk 2
vdub2pt0 said:
The frame is replaceable? Seems like it would be a risky undergoing
Sent from my SM-N910V using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
It's actually super easy to replace! If you watch a Note 4 disassembly video, you'll see that the aluminum frame can be replaced simply by unscrewing the back and undoing the clips. If you'd like to do the same, all you have to do is get a small screw driver and a guitar pick (or plastic knife, or whatever will undo the side plastic clip).
Here's the video: https://www.youtube.com/watch?v=OReK7M_6zg0
This guy takes the whole thing apart, but you'll just need to watch up to 4:30 to see what I'm talking about.
This is also useful information for anyone who scratches their camera lens or dings up the frame and wants to replace it for resale or something.
holycow1 said:
It's actually super easy to replace! If you watch a Note 4 disassembly video, you'll see that the aluminum frame can be replaced simply by unscrewing the back and undoing the clips. If you'd like to do the same, all you have to do is get a small screw driver and a guitar pick (or plastic knife, or whatever will undo the side plastic clip).
Here's the video: https://www.youtube.com/watch?v=OReK7M_6zg0
This guy takes the whole thing apart, but you'll just need to watch up to 4:30 to see what I'm talking about.
This is also useful information for anyone who scratches their camera lens or dings up the frame and wants to replace it for resale or something.
Click to expand...
Click to collapse
Sweet
Sent from my SM-N910V using Xparent Blue Tapatalk 2
Very cool. When I get my black one, I think that I'll buy a white cover!
holycow1 , did you ever do this?
holycow1 said:
It's actually super easy to replace! If you watch a Note 4 disassembly video, you'll see that the aluminum frame can be replaced simply by unscrewing the back and undoing the clips. If you'd like to do the same, all you have to do is get a small screw driver and a guitar pick (or plastic knife, or whatever will undo the side plastic clip).
Here's the video: https://www.youtube.com/watch?v=OReK7M_6zg0
This guy takes the whole thing apart, but you'll just need to watch up to 4:30 to see what I'm talking about.
This is also useful information for anyone who scratches their camera lens or dings up the frame and wants to replace it for resale or something.
Click to expand...
Click to collapse
If so, how did it turn out?
Haven't done it yet- I can only find the part through authorized samsung part resellers at the moment and they are trying to charge $100 for it. I am waiting for the chinese manufacturers to sell straight from the factory ($10-15) on eBay. But it will be a direct replacement, super easy to do.
OIC
Good luck. Post pics after you do it please!
I think it's a nice couple idea, but the ocd side of me hates mismatched things
Yes, you"re absolutely right (about the couple idea for me) until....
kimdoocheol said:
I think it's a nice couple idea, but the ocd side of me hates mismatched things
Click to expand...
Click to collapse
.... it's time for me to sell mine on craigslist and get something else.
I've already told her I may be trying out the edge and we'll have to switch covers if and when I do so.
She's not very happy about it either, but she'll get over it.
Guys just a quick update for anyone interested in a gold frame. It looks like this one is compatible with the Verizon Note 4...
http://www.ebay.com/itm/261701823333
I determined this by downloading the image with entire inside of the frame visible (flat, not the side angle view), and scaling it on screen to the size of my note 4. I then lined it up and it looks like it fits the Verizon mic holes. I believe its because they are the same as the international [N910F] holes. For $60, it's still a bit too much for me, but for some people that really want a black/gold or white/gold look and are willing to pay a little bit for it, it's definitely a great option! Also, it will keep you from scratching the frame that came with the phone for better resale value later.
I haven't seen one that's compatible with the T-Mobile/AT&T version's holes yet. Will keep you all updated.
I did the exact same thing today. I don't use cases and wanted a different look on my Note. Actually wanted just the black back with "Samsung" on it but I found none on Amazon that would let me use my Prime and I have need for instant gratification. So, I went with the black Verizon back on my Frost White Verizon Note. LOVE IT!
Thanks for posting this! I was really curious to see how it would like and it turns out it actually looks quite nice!
I contemplated removing the factory screen protector for the last month as I hate how my fingers catch the edges, how the dust gathered along the edges as well as how it affects the fingerprint scanner. Well I removed it today and added the liquid screen protector (which with a little commen sense actually worked to protect my screen on my Note 10 Plus for almost a year from any scratches) and this phone is so much nicer. Your fingers glide across the screen and the finger print reader works so much better know then with the protector. The screen also just looks better...clearer, I'm not sure how to describe it but I sure love this phone even more now.
Liquid Glass, it's been around for years. Hydrophobic.
It's nanometers in thickness. Bonds on the molecular level.
It's also a real ***** to remove especially around the edges. Mineral spirits, lots of it and clean clothes. If you go to another system it may not need removal or it could cause adhesion failure.
I'm not very keen on it for this application for a variety of reasons.
Unfortunately the protection 1 coat provides is almost nonexistent. On cars you need minimum 3 coats, 5+ is better with Liquid Glass; it's formulated to be used like this.
5+ coats looks like a layer of clear coat, great for black cars.
The stuff you're using not so sure it can be "layered".
Don't count on this to save the screen from even sand; it's simply not thick enough. It will repel water and make cleaning easier, eventually it wears off of heavily used areas.
No added impact resistance.
Plastic urethane screen protectors don't feel as good but provide excellent scratch/marring protection and even some limited impact protection.
imapfsr said:
I contemplated removing the factory screen protector for the last month as I hate how my fingers catch the edges, how the dust gathered along the edges as well as how it affects the fingerprint scanner. Well I removed it today and added the liquid screen protector (which with a little commen sense actually worked to protect my screen on my Note 10 Plus for almost a year from any scratches) and this phone is so much nicer. Your fingers glide across the screen and the finger print reader works so much better know then with the protector. The screen also just looks better...clearer, I'm not sure how to describe it but I sure love this phone even more now.
Click to expand...
Click to collapse
Where did you get your phone from because I really don't see a "factory" screen protector? I bought mine paid in full from Samsungs website but I really don't see a factory screen protector on it.
Mine was purchased directly from Samsung Canada and it had the factory screen on it...you can tell if you look at the front camera....you can see the circle around the camera.
imapfsr said:
Mine was purchased directly from Samsung Canada and it had the factory screen on it...you can tell if you look at the front camera....you can see the circle around the camera.
Click to expand...
Click to collapse
I looked and quite closely too and I don't see anything around my camera hole.. At least nothing that resembles a screen protector cut-out.. I'm guessing some have them and some don't.
That is pretty strange, I cannot remember the last Samsung phone I have purchased that didn't have a factory installed screen protector.
MrMike2182 said:
I looked and quite closely too and I don't see anything around my camera hole.. At least nothing that resembles a screen protector cut-out.. I'm guessing some have them and some don't.
Click to expand...
Click to collapse
Apparently this is the case; some do, some don't.
You can see a small bit of exposed screen all around the edge of the screen protector if it has one.
Lame of Samsung not to include this on some for at least temporarily protection.
MrMike2182 said:
I looked and quite closely too and I don't see anything around my camera hole.. At least nothing that resembles a screen protector cut-out.. I'm guessing some have them and some don't.
Click to expand...
Click to collapse
imapfsr said:
That is pretty strange, I cannot remember the last Samsung phone I have purchased that didn't have a factory installed screen protector.
Click to expand...
Click to collapse
The US didn't get it. It's by region.
pcriz said:
The US didn't get it. It's by region.
Click to expand...
Click to collapse
Mine came with one, US unlocked.
One4mNoWhere said:
Mine came with one, US unlocked.
Click to expand...
Click to collapse
That factory one is really pretty good.
Leave it on until it wears out. Have a one ready.
I found the wet apply ones are the easiest to put on perfectly. They last about 3-4 months maybe more, give good scratch protection and a little impact protection as well.
Yes I still have the factory one on it, thanks. I did purchase amfilm on Amazon for when factory one wears out. I was tempted to order the Whitestone dome but way too expensive.
One4mNoWhere said:
Mine came with one, US unlocked.
Click to expand...
Click to collapse
That's really odd because both of mine did not. Are you sure you arent using the shipping cover that had the hole where the fingerprint reader is?
dottat said:
That's really odd because both of mine did not. Are you sure you arent using the shipping cover that had the hole where the fingerprint reader is?
Click to expand...
Click to collapse
Yes you're right, but am riding it out.
imapfsr said:
That is pretty strange, I cannot remember the last Samsung phone I have purchased that didn't have a factory installed screen protector.
Click to expand...
Click to collapse
I bought mine from Samsung directly (unlocked) and it didn't come with a screen protector either.
One4mNoWhere said:
Mine came with one, US unlocked.
Click to expand...
Click to collapse
So yours didn't come with one. We are talking about two different things.
On one hand you have a factory installed edge to edge screen protector with a cut out for the camera.
On the other hand you have a shipping film added to keep the screen from getting scuffed when shifting around in the box.
I usually remove mine when it starts to get messed up. Then it's like getting a new phone!
imapfsr said:
I contemplated removing the factory screen protector for the last month as I hate how my fingers catch the edges, how the dust gathered along the edges as well as how it affects the fingerprint scanner. Well I removed it today and added the liquid screen protector (which with a little commen sense actually worked to protect my screen on my Note 10 Plus for almost a year from any scratches) and this phone is so much nicer. Your fingers glide across the screen and the finger print reader works so much better know then with the protector. The screen also just looks better...clearer, I'm not sure how to describe it but I sure love this phone even more now.
Click to expand...
Click to collapse
i use my phone without any protector )
Don't remember if mine came with one or not. But definitely need one and a case as well because I HATE the accidental touches on my phone lol
Mine came from Samsung Canada with the preinstalled screen protector, but I was unhappy with the responsiveness of the fingerprint sensor, so I peeled it off. What a difference. The fingerprint sensor works instantly and the screen feels much smoother.