I've had my VS980 rooted for a few months. Started with TWRP 3.6.3.2, then upgraded to 3.6.3.3. All has been well but then today when I rebooted into recovery the screen went black except for the following text in small font at the top...
[450] Fastboot mode started
[500] udc_start()
I held the power button for 10 seconds to reboot to my rom (Mhadi). I then rebooted to recovery again and it was the same but the numbers were 490 and 440. I then did it a third time and it was back to 500 and 450. Strange. Vol up and down didn't do anything.
I also tried re-downloading TWRP 3.6.3.3 and flashing it via Flashify but I still went back to the fastboot screen.
What should I do to get back into TWRP?
Sent from my LG G2 android phone
jagman96 said:
I've had my VS980 rooted for a few months. Started with TWRP 3.6.3.2, then upgraded to 3.6.3.3. All has been well but then today when I rebooted into recovery the screen went black except for the following text in small font at the top...
[450] Fastboot mode started
[500] udc_start()
I held the power button for 10 seconds to reboot to my rom (Mhadi). I then rebooted to recovery again and it was the same but the numbers were 490 and 440. I then did it a third time and it was back to 500 and 450. Strange. Vol up and down didn't do anything.
I also tried re-downloading TWRP 3.6.3.3 and flashing it via Flashify but I still went back to the fastboot screen.
What should I do to get back into TWRP?
Sent from my LG G2 android phone
Click to expand...
Click to collapse
I am also in the same situation and need help. if you find a solution can you let me know too
Hopefully somebody will help us out. I've been searching to no avail.
Sent from my LG G2 android phone
Problem solved here .
Related
I tried (clean) flashing a droid concepts build over on droid-hive a little while ago and everything went ok when flashing. I tapped reboot system in twrp and the screen went black and didn't boot. I can't get it to boot consistently either into the os or into fastboot. It'll occasionally let me into recovery and I tried restoring a backup and also just rebooting from recovery and it won't boot at all. When it is plugged up, it'll show the charging icon when I tap the power button like it does when the screen is off. I've tried everything I can think of. Any help would be appreciated. Thanks.
Edit - I finally got it into fastboot and I flashed the stock google image. Its working now.
Sent from my Galaxy Nexus using Tapatalk 4 Beta
Hello everyone,
i tried installing CM11 on my d802 with CWM. Flashed the zip and worked fine but im now hanging in a boot loop and only the CM splashscreen is showing. I tried to boot into recovery but it wont let me, only thing working is the download mode. I searched a couple of threads here but didnt really found anything that helps me.
Hope someone got an idea how to get my G2 working again, dont even care much if its stock or CM.
seasen said:
Hello everyone,
i tried installing CM11 on my d802 with CWM. Flashed the zip and worked fine but im now hanging in a boot loop and only the CM splashscreen is showing. I tried to boot into recovery but it wont let me, only thing working is the download mode. I searched a couple of threads here but didnt really found anything that helps me.
Hope someone got an idea how to get my G2 working again, dont even care much if its stock or CM.
Click to expand...
Click to collapse
This happend to me with my LS980, heres what I did, i waited until my G2 was fully charged, i knew it was fully charged becuase in download mode you should see the letter B, the letter B indicates the battery, if your battery is at "B100" detach your phone from the charger, hold the power button for the phone to restart, and quickly press and hold the power button and the volume down button at thw same time,, repeat this step again quicly after the Boot Logo shows up, and you should boot into Recovery Mode and restore your backup.
Sent from my LS980 running PA 4.4.4 KitKat using Tapatalk???
I tried that for like a 100 times, it wont start into recovery. it just starts back to the splashscreen.
trying this now : http://forum.xda-developers.com/showthread.php?t=2432476
howw to charge the phone when it on bootloop,whenever i plugged the cable its start bootloop
I bought a LG g2 D802 32G with root a few days ago , I tried to upgrade to 4.4.2 stock from this guide. The upgrade was completed
Then the device turns on ,frist LG logo ,then the Attached image and after a second shuts down and back on, with stuck LG logo with led change colors.
I can't get into the recovery mode with any method, only download mode. I tried to flash another versions, it completed but the same problem ...
Also, when i enter into download mode written down in a frame rooted in red, but i flash a stock ROM in "Flash CSE" mode... can be recovery mode screwed? And that's why the device does not work?
I tried also via LG Support Tool same problem ....
Reset my strength
How do I fix this?
please try to help?
ohad123 said:
I bought a LG g2 D802 32G with root a few days ago , I tried to upgrade to 4.4.2 stock from this guide. The upgrade was completed
Then the device turns on ,frist LG logo ,then the Attached image and after a second shuts down and back on, with stuck LG logo with led change colors.
I can't get into the recovery mode with any method, only download mode. I tried to flash another versions, it completed but the same problem ...
Also, when i enter into download mode written down in a frame rooted in red, but i flash a stock ROM in "Flash CSE" mode... can be recovery mode screwed? And that's why the device does not work?
I tried also via LG Support Tool same problem ....
Reset my strength
How do I fix this?
Click to expand...
Click to collapse
Using the flash tool will take your phone completely back to it's original factory state and that includes the recovery. If you get stuck in a bootloop after using this method, you should be able to fix it by performing a hard factory reset.
When the device is powered down hold the volume down button. While pressing volume down press the power button. After the device kicks on release both buttons. As soon as the LG logo appears press the power button a second time. It's a little tricky at first but if you have done it correctly it should go into a white screen asking you if you would like to perform a factory reset. Go ahead and reset the phone.
This should fix your problem and boot you up into a fresh install.
I tried this but it dose not work, I can't get into the recovery mode. the g2 stuck LG logo....
Hi everyone,
After trying to flash the resurrection remix rom on my LG G2 D805, i got stuck on the logo, with no recovery mode, and on download mode it says "USER B3" or "USER B4" and rooted, and when i try to flash the kdz file it says "upgrade stopped due to an error". Also, the phone if not on download mode is not recognized by windows, and on download mode, on device manager, its recognized as "USB composite device". Furthermore, I don't know if this have anything to do with the issue, but on the same day i tried to flash the rom, in the morning the phone was REALLY hot, even burning my hands, and not turning on, so i left it cool down and then it was working properly when i decided to flash the rom... Do you guys think there is any way to get my phone back working?:crying:
Thank you all for your time!
Are you positive you cannot enter recover. Try this. Hold the power button for 30 sec. Then hold volume down and the power button simultaneously until you see the lg logo. When you see the logo quickly let go of the buttons and reclick them immediately. It should go to factory reset screen. From there continue and you should boot into twrp.
Sent from my LG-D800 using Tapatalk
Nope, doesn't work. The phone just keeps rebooting and after pressing both buttons gets stuck on the logo, or just turn the screen off and start blinking a red led...
what g2 model do you have? if you are in the screen of user b3 or user b4 and the word rooter with red color as you mentioned then you are in download mode, now if kdz is not working the other method you have is TOT method, if there is no tot files for your g2 variant try to uninstall and then reinstall the drivers and then try flash kdz again or also you can try with fastboot commands to return to recovery
Thank you so much! I found the TOT files and could save the phone, problem solved
Hello
So today was planning to flash with a new ROM, so i started to do a factory reset from with in android, nothing happened
so i reboot the phone to enter recovery mode to do it from there, using Teamwin for that. But when booting up, getting the message entering recovery mode 5 sec later i see the logo for Teamwin and here it stops.
The logo keeps flashing every 4 seconds or so. Have tried without Sim card, done the battery thing where i remove
it and hold the power button for a while, but all end up in same, the teamwin logo flashing
As far as i can see i can´t enter anywhere to flash the phone as the only thing i get is a flashing logo...
Also Odin does not detect the phone via usb either
is there a way to resolve this?
Thanks