when i follow a guide for flash a custom Rom/flash, i brick a i337 phone i need help is me christmas gift :c
Sigh. You didn't read the correct "guide" then. You cannot flash kernels or custom recoveries on 4.3.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Try kies to restore the phone, try the mk2 update zip, or the mf3 tar files with odin. Or take it to best buy and have the Samsung guys flash it back to stock.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
HORiZUN said:
Try kies to restore the phone, try the mk2 update zip, or the mf3 tar files with odin. Or take it to best buy and have the Samsung guys flash it back to stock.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
with kies .. not responding
mk2 update .zip cannot acces to recovery
with odin Where found this? "with mf3 tar files"
charlymtz said:
with kies .. not responding
mk2 update .zip cannot acces to recovery
with odin Where found this? "with mf3 tar files"
Click to expand...
Click to collapse
Follow this guide http://forum.xda-developers.com/showthread.php?t=2526964
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
charlymtz said:
when i follow a guide for flash a custom Rom/flash, i brick a i337 phone i need help is me christmas gift :c
Click to expand...
Click to collapse
Follow my thread http://forum.xda-developers.com/showthread.php?t=2573080 on post#3 there is guide from gtj0 that I edited to unbricked mk2 phone. ...... make sure u download MF3>MK2 update.zip from OP (Original Post) coz u gonna need it in the end of the MK2_UNBRICKED_METHOD. ...... download and extract the mf3 emergency part 1 and 2 files. ....and so on. ...... Hope this help you.....goodluck. ....:thumbup::thumbup:
Swyped from MK2 Deadly Venom SS
Testing ¡¡¡¡ :d
4:12 pm mexico
i flash MF3>MK2 update.zip Now can acces to recovery..
testing... i charge the update.zip to sd using http://forum.xda-developers.com/showthread.php?t=2573080 #2
but not work.. now going to ry ""MK2_UNBRICKED_METHOD. ...... download and extract the mf3 emergency part 1 and 2 files""
testing..
5:21 pm mexico
YOUR ARE AMAZING ¡¡¡¡
works¡¡¡
ted77usa said:
Follow my thread http://forum.xda-developers.com/showthread.php?t=2573080 on post#3 there is guide from gtj0 that I edited to unbricked mk2 phone. ...... make sure u download MF3>MK2 update.zip from OP (Original Post) coz u gonna need it in the end of the MK2_UNBRICKED_METHOD. ...... download and extract the mf3 emergency part 1 and 2 files. ....and so on. ...... Hope this help you.....goodluck. ....:thumbup::thumbup:
Swyped from MK2 Deadly Venom SS
Click to expand...
Click to collapse
Can I simply flash the MF3>MK2 update.zip from the stock recovery after putting on sd card? I see those instructions on your thread but thought someone mentioned that this update was safer to be done through odin with the update file on computer. How should I update to mk2?
Edit** Do we even have Mk2 tar files to flash via odin??
charlymtz said:
Testing ¡¡¡¡ :d
4:12 pm mexico
i flash MF3>MK2 update.zip Now can acces to recovery..
testing... i charge the update.zip to sd using http://forum.xda-developers.com/showthread.php?t=2573080 #2
but not work.. now going to ry ""MK2_UNBRICKED_METHOD. ...... download and extract the mf3 emergency part 1 and 2 files""
testing..
5:21 pm mexico
YOUR ARE AMAZING ¡¡¡¡
works¡¡¡
Click to expand...
Click to collapse
Awesome. .... GLAD that you have your phone back. ....:thumbup: and if you could comment what u did in the thread, rate and hit THANK button. ... that would be very helpful for other users with same issue....... :thumbup:
cyrusalmighty said:
Can I simply flash the MF3>MK2 update.zip from the stock recovery after putting on sd card? I see those instructions on your thread but thought someone mentioned that this update was safer to be done through odin with the update file on computer. How should I update to mk2?
Edit** Do we even have Mk2 tar files to flash via odin??
Click to expand...
Click to collapse
You could If you sure that u are on stock mf3....... I mean stock mean that u not root, no safestrap recovery, and make sure all ATT bloatware are in place and install them back if u freezed or uninstalled them earlier. .....and we don't have complete MK2.tar files yet but we do part of it. .... On post #3..... and as of right now to get back from bricked MK2..... use that mk2_unbricked_method from post#3 that I edited ......follow the guide. ....
Swyped from MK2 Deadly Venom SS
ted77usa said:
Awesome. .... GLAD that you have your phone back. ....:thumbup: and if you could comment what u did in the thread, rate and hit THANK button. ... that would be very helpful for other users with same issue....... :thumbup:
You could If you sure that u are on stock mf3....... I mean stock mean that u not root, no safestrap recovery, and make sure all ATT bloatware are in place and install them back if u freezed or uninstalled them earlier. .....and we don't have complete MK2.tar files yet but we do part of it. .... On post #3..... and as of right now to get back from bricked MK2..... use that mk2_unbricked_method from post#3 that I edited ......follow the guide. ....
Swyped from MK2 Deadly Venom SS
Click to expand...
Click to collapse
1 FLASH THIS VIA ODIN:
I337MK2Boot.tar.md5 http://forum.xda-developers.com/showthread.php?t=2573080 #3
2 flash recovery-mj6.tar.md5 http://forum.xda-developers.com/showthread.php?t=2573080 #3
3 Flash
mf3-emergency-part-1.tar.md5.7z
mf3-emergency-part-2.tar.md5.7z
DONE ¡¡¡
this happens DOWNGRADE to version 4.2.2
Tanks so much... Topic ---RESOLVED******************
RE Opening...
i337 kernel fail 4.3 STARTUP OK
But wifi No turn ON
LZLandingZone said:
Sigh. You didn't read the correct "guide" then. You cannot flash kernels or custom recoveries on 4.3.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Thats only true for i337, i377m or canadian variant, can run anything. It will trip knox, but i can run any cwm/twrp and any rom on a 4.3 updated i377m.
Sent from my SGH-I337M
ted77usa said:
Awesome. .... GLAD that you have your phone back. ....:thumbup: and if you could comment what u did in the thread, rate and hit THANK button. ... that would be very helpful for other users with same issue....... :thumbup:
You could If you sure that u are on stock mf3....... I mean stock mean that u not root, no safestrap recovery, and make sure all ATT bloatware are in place and install them back if u freezed or uninstalled them earlier. .....and we don't have complete MK2.tar files yet but we do part of it. .... On post #3..... and as of right now to get back from bricked MK2..... use that mk2_unbricked_method from post#3 that I edited ......follow the guide. ....
Swyped from MK2 Deadly Venom SS
Click to expand...
Click to collapse
Now cannot turn ON wifi ...
charlymtz said:
Now cannot turn ON wifi ...
Click to expand...
Click to collapse
@charlymtz Follow my newest thread for MK2 Full tar files. ..... | ★ MK2 ★ FULL ODIN TAR FILES ★ MK2 ★ | ★ UNBRICKED ★ Jan.31.2014 ★ | it should get u stock MK2 easily.... check post #2 for guide on how to and image guide...:thumbup::thumbup:
Swyped From MK2 Dark Venom SS Edition
ted77usa said:
@charlymtz Follow my newest thread for MK2 Full tar files. ..... | ★ MK2 ★ FULL ODIN TAR FILES ★ MK2 ★ | ★ UNBRICKED ★ Jan.31.2014 ★ | it should get u stock MK2 easily.... check post #2 for guide on how to and image guide...:thumbup::thumbup:
Swyped From MK2 Dark Venom SS Edition
Click to expand...
Click to collapse
Going to test, TANKS AGAIN¡¡
charlymtz said:
Going to test, TANKS AGAIN¡¡
Click to expand...
Click to collapse
ok flash ok
wifi on only without sim, when insert sim (reboot me phone) and wifi no turnOn, reboot/reset factory (via recovery (wipe data and wipe cache)) and works again (with sim and witout sim), restart me phone (with sim and witout sim ) and not work...
charlymtz said:
ok flash ok
wifi on only without sim, when insert sim (reboot me phone) and wifi no turnOn, reboot/reset factory (via recovery (wipe data and wipe cache)) and works again (with sim and witout sim), restart me phone (with sim and witout sim ) and not work...
Click to expand...
Click to collapse
Check your apn settings. They should be set to what your carrier recommends
jd1639 said:
Check your apn settings. They should be set to what your carrier recommends
Click to expand...
Click to collapse
the problem is with wifi sometimes not tURNON, for work again i need reboot in recovery and wipe cache and data... and is very slow to turnON
charlymtz said:
the problem is with wifi sometimes not tURNON, for work again i need reboot in recovery and wipe cache and data... and is very slow to turnON
Click to expand...
Click to collapse
Perform a factory wipe after the flash to clear old data. Wiping cache isnt enough, u wanna clear the old sys and usr data
Sent from my SGH-I337M
azuziel said:
Perform a factory wipe after the flash to clear old data. Wiping cache isnt enough, u wanna clear the old sys and usr data
Sent from my SGH-I337M
Click to expand...
Click to collapse
READY¡¡
But not work. , i really thing abut hardware
Related
Hey guys,
How do I Install 4.3 on Rooted S4 i337 MF3 (at&t unlocked).
Do I have to unroot and then install then root again?
please help
thanks
langleyguy said:
Hey guys,
How do I Install 4.3 on Rooted S4 i337 MF3 (at&t unlocked).
Do I have to unroot and then install then root again?
please help
thanks
Click to expand...
Click to collapse
From what I read AT&T pulled the update because it had "Problems". So ATM there's no OTA.
Sent from my GT-I9505 using XDA Premium 4 mobile app
langleyguy said:
Hey guys,
How do I Install 4.3 on Rooted S4 i337 MF3 (at&t unlocked).
Do I have to unroot and then install then root again?
please help
thanks
Click to expand...
Click to collapse
You can try this method.
http://forum.xda-developers.com/showthread.php?t=2529759
Sent from my SAMSUNG-SGH-I337 using xda premium
Starting at the MF3 point in this thread helped me. http://forum.xda-developers.com/showthread.php?t=2526964
The OP has a link to download the update and side load it. I was able to install off my sd card through stock recovery. I detailed somewhere towards the end of the thread how I did it. It was off topic however. Feel free to ask questions. I will try to consolidate a good how to a little later tonight.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
CAG-man said:
Starting at the MF3 point in this thread helped me. http://forum.xda-developers.com/showthread.php?t=2526964
The OP has a link to download the update and side load it. I was able to install off my sd card through stock recovery. I detailed somewhere towards the end of the thread how I did it. It was off topic however. Feel free to ask questions. I will try to consolidate a good how to a little later tonight.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Raidel00 has a thread opened up for mf3 to mj9. I don't know how successful his thread has been since I used the other method (link) you posted and it worked fine for me. But don't you just have to side load it through adb or through SD card? Since your on mf3 you dont have to download the mf3 partial file that I had to download since I was on mj6 correct?
Sent from my SAMSUNG-SGH-I337 using xda premium
This is correct. Just download the update file, rename to a zip and side load through adb or use recovery to install.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
CAG-man said:
This is correct. Just download the update file, rename to a zip and side load through adb or use recovery to install.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
About to try this with my ATT S4 with MF3 and report.
If you do have troubles still when your phone boots and you are rooted use a file explorer to look at the log files in /cache/recovery to see where it failed.
This is how I installed my MJ9. I had a modified feature.xml file.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
upgrade rooted I337 from 4..2.2 to 4.3
i searched the best i could and i keep coming back to this thread but it is old..i am sure the answer to my question is here somewhere, so maybe someone can show me where the info is?
i have an unlocked and rooted ATT I337 4.2.2 build MF3
i want to upgrade to 4.3.. can someone please link me to the thread? thank you
matt1110 said:
i searched the best i could and i keep coming back to this thread but it is old..i am sure the answer to my question is here somewhere, so maybe someone can show me where the info is?
i have an unlocked and rooted ATT I337 4.2.2 build MF3
i want to upgrade to 4.3.. can someone please link me to the thread? thank you
Click to expand...
Click to collapse
@matt1110 If you want to Upgrade to 4.3 MK2 firmware. ...Follow my thread http://forum.xda-developers.com/showthread.php?t=2621279 check post #2 for guide .... tested my self and also confirmed by others. .... Goodluck...... just wondering u said that u have ATT 4.2.2 MF3 firmware and unlocked:what::what: ..... AFAIK.... ATT i337 S4 never have unlock bootloader. .....
Swyped From MK2 Dark Venom SS Edition
ted77usa said:
@matt1110 If you want to Upgrade to 4.3 MK2 firmware. ...Follow my thread http://forum.xda-developers.com/showthread.php?t=2621279 check post #2 for guide .... tested my self and also confirmed by others. .... Goodluck...... just wondering u said that u have ATT 4.2.2 MF3 firmware and unlocked:what::what: ..... AFAIK.... ATT i337 S4 never have unlock bootloader. .....
Swyped From MK2 Dark Venom SS Edition
Click to expand...
Click to collapse
i should have been more specific..the SIM is unlocked or i am able to use it with other carriers ( i am old and barely able to root and unlock a bootloader, not sure what it even is) but i did both to an old atrix and rooted my S3 and then my S4..the bootloader is locked..
thank for the link and i will read and re read it until i feel comfortable enough doing it..thanks again
ted77usa said:
@matt1110 If you want to Upgrade to 4.3 MK2 firmware. ...Follow my thread http://forum.xda-developers.com/showthread.php?t=2621279 check post #2 for guide .... tested my self and also confirmed by others. .... Goodluck...... just wondering u said that u have ATT 4.2.2 MF3 firmware and unlocked:what::what: ..... AFAIK.... ATT i337 S4 never have unlock bootloader. .....
Swyped From MK2 Dark Venom SS Edition
Click to expand...
Click to collapse
hi ted...updated my drivers, used your link to get the newest odin...now here comes the dumb stuff...seriously, i am 57 and i could have auditioned for "dumb and dumber" so here goes..
i see all the files...the .tar files.. if i do not download the "all in one", do i download and use the three other .tar files? (stockrecovery, stockmodem and boot? or do i just use one? my goal s to have 4.3 and a rooted phone. am i able to save all my apps and data using titanium backup with no fear of losing all my stuff?
thanks for repeating what is probably here somewhere and i could figure out if i took a few days..
matt1110 said:
hi ted...updated my drivers, used your link to get the newest odin...now here comes the dumb stuff...seriously, i am 57 and i could have auditioned for "dumb and dumber" so here goes..
i see all the files...the .tar files.. if i do not download the "all in one", do i download and use the three other .tar files? (stockrecovery, stockmodem and boot? or do i just use one? my goal s to have 4.3 and a rooted phone. am i able to save all my apps and data using titanium backup with no fear of losing all my stuff?
thanks for repeating what is probably here somewhere and i could figure out if i took a few days..
Click to expand...
Click to collapse
Choose only one. ... If u use 4 files then u need to place it according to image on post #2...... Each file goes to each Odin slot. ...... but if u choose all in one file then only place it on PDA slot from Odin. The others separate files from post#3 use it only if you soft bricked and want to replace certain file ( recovery, boot or modem).Both 4 files and all in one files would wipe your data and apps..... It would take you straight to stock MK2 firmware.
Swyped From MK2 Dark Venom SS Edition
ted77usa said:
Choose only one. ... If u use 4 files then u need to place it according to image on post #2...... Each file goes to each Odin slot. ...... but if u choose all in one file then only place it on PDA slot from Odin. The others separate files from post#3 use it only if you soft bricked and want to replace certain file ( recovery, boot or modem).Both 4 files and all in one files would wipe your data and apps..... It would take you straight to stock MK2 firmware.
Swyped From MK2 Dark Venom SS Edition
Click to expand...
Click to collapse
MK2 being 4.3? it seems to me, the easiest riute is the all in one, although it is huge..i can always delete it after use of course.
from what i understand, even after a wipe, i can reinstall titanium backup and get all my data and apps back or is there a better way? member, dumber here...
and, stock MK2... is there a link to rooting this after i do the upgrade ? i like a rooted phone..i unlocked the bootloader on my atrix , i guess more as an act of defiance than knowing wtf i was doing...
so now with my S4, i hope to resolve the freeze and wi-fi issues...i had no such problems with my S3..and of course i want to attain root.
thanks!
matt1110 said:
MK2 being 4.3? it seems to me, the easiest riute is the all in one, although it is huge..i can always delete it after use of course.
from what i understand, even after a wipe, i can reinstall titanium backup and get all my data and apps back or is there a better way? member, dumber here...
and, stock MK2... is there a link to rooting this after i do the upgrade ? i like a rooted phone..i unlocked the bootloader on my atrix , i guess more as an act of defiance than knowing wtf i was doing...
so now with my S4, i hope to resolve the freeze and wi-fi issues...i had no such problems with my S3..and of course i want to attain root.
thanks!
Click to expand...
Click to collapse
Check this MK2 INDEX AND ROM LIST http://forum.xda-developers.com/showthread.php?t=2616221 by @guut13 alot of good information and links ....like rooting. .... Safestrap recovery. ... returning to stock. ..... sim unlocked. ... and over 20 compatible rom that worked with MK2+SSv3.71
Swyped From MK2 Dark Venom SS Edition
ted77usa said:
Check this MK2 INDEX AND ROM LIST http://forum.xda-developers.com/showthread.php?t=2616221 by @guut13 alot of good information and links ....like rooting. .... Safestrap recovery. ... returning to stock. ..... sim unlocked. ... and over 20 compatible rom that worked with MK2+SSv3.71
Swyped From MK2 Dark Venom SS Edition
Click to expand...
Click to collapse
well, i downloaded the all in one and when i try and use odin, it tell me that the tar file is invalid..and my phone is now saying "downloading...do not turn off target! but it is not connected to anything and if i connect it and use odin, i get the tar file is invalid error
matt1110 said:
well, i downloaded the all in one and when i try and use odin, it tell me that the tar file is invalid..and my phone is now saying "downloading...do not turn off target! but it is not connected to anything and if i connect it and use odin, i get the tar file is invalid error
Click to expand...
Click to collapse
@matt1110 U might got bad download ..... try to re-download the file and make sure md5 are matched. ... just pull your battery off. ....put it back and go to download mode (voldown+home+power) ......flash the valid file via Odin....
Swyped From MK2 Dark Venom SS Edition
ted77usa said:
@matt1110 U might got bad download ..... try to re-download the file and make sure md5 are matched. ... just pull your battery off. ....put it back and go to download mode (voldown+home+power) ......flash the valid file via Odin....
Swyped From MK2 Dark Venom SS Edition
Click to expand...
Click to collapse
ok..i did the battery pull...phone now says "firmware upgrade encountered an issue. Pleas select recovery mode in kies and try again"
was it trying to do an OTA before i hooked it up via usb to the laptop?
now odin sees it but it does a fail
---------- Post added at 08:03 AM ---------- Previous post was at 07:57 AM ----------
matt1110 said:
ok..i did the battery pull...phone now says "firmware upgrade encountered an issue. Pleas select recovery mode in kies and try again"
was it trying to do an OTA before i hooked it up via usb to the laptop?
now odin sees it but it does a fail
Click to expand...
Click to collapse
it seems to be loading this time
---------- Post added at 08:09 AM ---------- Previous post was at 08:03 AM ----------
matt1110 said:
ok..i did the battery pull...phone now says "firmware upgrade encountered an issue. Pleas select recovery mode in kies and try again"
was it trying to do an OTA before i hooked it up via usb to the laptop?
now odin sees it but it does a fail
---------- Post added at 08:03 AM ---------- Previous post was at 07:57 AM ----------
it seems to be loading this time
Click to expand...
Click to collapse
got a "pass" this time..phone is rebooting or something...seems to be all good..
got everything working...and am rooted too... thanks ted
I have a AT&T galaxy s4 SGH-I337 that i bricked. i was trying to install cyanogenmod 11 but i accidently flashed the zip to the stock. the operation failed and now i cant boot to the stock. i can boot into download mode and recovery. im using safestrap 7 as my recovery, but i dont think it is working properly. i need help asap thanks
What firmware did your device have installed? MF3, MK2? You'll have to use odin if on MF3, or the mk2 unbreakable zip if you're on mk2.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
aandrichaci said:
I have a AT&T galaxy s4 SCH-I337 that i bricked. i was trying to install cyanogenmod 11 but i accidently flashed the zip to the stock. the operation failed and now i cant boot to the stock. i can boot into download mode and recovery. im using safestrap 7 as my recovery, but i dont think it is working properly. i need help asap thanks
Click to expand...
Click to collapse
There's only safestrap 3.65 and 3.71. In the future read more, because safestrap is only capable of running touchwiz roms, not cyanogenmod. This has to do with the kernel. Now that you flashed to stock slot your recovery is borked. Do what he said above.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
HORiZUN said:
What firmware did your device have installed? MF3, MK2? You'll have to use odin if on MF3, or the mk2 unbreakable zip if you're on mk2.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
im pretty sure im on mk2 can u give me a link to the mk2 zip?
http://forum.xda-developers.com/showthread.php?t=2573080
There you go. If you had 4.3 mk2 you should be able to recover.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
HORiZUN said:
http://forum.xda-developers.com/showthread.php?t=2573080
There you go. If you had 4.3 mk2 you should be able to recover.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
i hate to sound like a noob but how do i flash it? do i use odin?
Copy it to the root of your SD card. Reboot into recovery mode (tutorials are out there) and apply update.zip
Sent from my SAMSUNG-SGH-I337 using Tapatalk
HORiZUN said:
Copy it to the root of your SD card. Reboot into recovery mode (tutorials are out there) and apply update.zip
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
there's no option to apply in safestrap.
aandrichaci said:
I have a AT&T galaxy s4 SGH-I337 that i bricked. i was trying to install cyanogenmod 11 but i accidently flashed the zip to the stock. the operation failed and now i cant boot to the stock. i can boot into download mode and recovery. im using safestrap 7 as my recovery, but i dont think it is working properly. i need help asap thanks
Click to expand...
Click to collapse
OK follow my thread http://forum.xda-developers.com/showthread.php?t=2573080 on post #3 if you bricked mk2 phone. .....THIS IS THE ONLY WAY AS OF RIGHT NOW. ......use mk2_unbricked_method from gtj0 that I edited. ...... make sure u download MF3 > MK2 update.zip from First post coz u gonna need it in the end of the method. ..... Let me know if u need more help. ...Goodluck. ... If work or I helped u hit THANK.......
Swyped from MK2 Deadly Venom SS
ted77usa said:
OK follow my thread http://forum.xda-developers.com/showthread.php?t=2573080 on post #3 if you bricked mk2 phone. .....THIS IS THE ONLY WAY AS OF RIGHT NOW. ......use mk2_unbricked_method from gtj0 that I edited. ...... make sure u download MF3 > MK2 update.zip from First post coz u gonna need it in the end of the method. ..... Let me know if u need more help. ...Goodluck. ... If work or I helped u hit THANK.......
Swyped from MK2 Deadly Venom SS
Click to expand...
Click to collapse
When i try using the adb sideload it just says "starting adb sideload feature" and loads forever. does it take long to load or is it not working. and which folder do i open up a command prompt in.
aandrichaci said:
When i try using the adb sideload it just says "starting adb sideload feature" and loads forever. does it take long to load or is it not working. if its not working can i do anything else?
Click to expand...
Click to collapse
So u did all the mf3 emergency part 1 and 2...... installing recovery-mj6.tar.md5 ..... and right now u are updating mf3> mk2 update. Zip right. .... It take a while. ..... Be patient and see what happen. ..... is 700mb+ ..... Did u Check post#2 on how to update using adb sideload. .... Just incase. ....:thumbup:
Swyped from MK2 Deadly Venom SS
ted77usa said:
So u did all the mf3 emergency part 1 and 2...... installing recovery-mj6.tar.md5 ..... and right now u are updating mf3> mk2 update. Zip right. .... It take a while. ..... Be patient and see what happen. ..... is 700mb+ ..... Did u Check post#2 on how to update using adb sideload. .... Just incase. ....:thumbup:
Swyped from MK2 Deadly Venom SS
Click to expand...
Click to collapse
thanks! everythings working fine now
aandrichaci said:
thanks! everythings working fine now
Click to expand...
Click to collapse
Glad i can help.....just giving back to this great community what i learned .....as long as u KEEP READING ....u would find your answer in here......"ANYTHING IS POSSIBLE IN XDA" REMEMBER FIRST THANK FROM ME......
ted77usa said:
Glad i can help.....just giving back to this great community what i learned .....as long as u KEEP READING ....u would find your answer in here......"ANYTHING IS POSSIBLE IN XDA" REMEMBER FIRST THANK FROM ME......
Click to expand...
Click to collapse
hey i flashed that tar file to my phone like u tolde him but i got no wifi or mobile data or sound can u plis give me a hand
Bricked Samsung Galaxy S4 i337
aandrichaci said:
I have a AT&T galaxy s4 SGH-I337 that i bricked. i was trying to install cyanogenmod 11 but i accidently flashed the zip to the stock. the operation failed and now i cant boot to the stock. i can boot into download mode and recovery. im using safestrap 7 as my recovery, but i dont think it is working properly. i need help asap thanks
Click to expand...
Click to collapse
I have about the same problem. I recently rooted my phone then downloaded a root required app. After the download, it made me reboot and now I'm stuck in a boot loop with stock recovery mode and download mode. I've tried everything I can since I'm limited to only using a mac. Please help ASAP. Thanks.
I was on mdb. It updated to mf3. At that point I had root. But no signal so I let it update to mk2 to see if my signal would b better. But I forgot to uninstall supersu before the update. Now I can't get it off my phone. Reason I want to do so being I'm getting errors while trying to update the binaries. Can't use twrp/cwm method when I have a stock recovery. What do I need to do now. Tried restoring to stock mdb thru Odin with a fail on 13..right after aboot operation.
Just got the supersu updated still still a no go on normal installation. With out a custom recovery I can't get it installed thru a zip in the stock recovery can I?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Follow this thread. .... http://forum.xda-developers.com/showthread.php?t=2607011...... check on post #15...... I posted SAFEROOT METHOD LINK THAT SUPER EASY AS 1.2.3. .....BTW for Mk2 user. ... Only SAFESTRAP WORK AS RECOVERY. ..... GOODLUCK
Swyped from MK2 Deadly Venom SS
Same thing. After pushing files it says rebooting and then open supersu and let it update. Which of course comes back to supersu failing to install binaries. Is there a way to remove the supersu app because remember it's not showing any uninstall options. And no root yet because binaries not updated or else I cud have titanium backup remove it.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
trouty said:
Same thing. After pushing files it says rebooting and then open supersu and let it update. Which of course comes back to supersu failing to install binaries. Is there a way to remove the supersu app because remember it's not showing any uninstall options. And no root yet because binaries not updated or else I cud have titanium backup remove it.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Choose normal when it prompt to update binary. ... Should work
Swyped from MK2 Deadly Venom SS
This has been the problem from from the beginning. Under normal it errors out.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
trouty said:
This has been the problem from from the beginning. Under normal it errors out.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Are u still on MF3 or MK2? seem to me when u updated to 4.3 MK2 it failed and also failed when u tried to flash MDL firmware .....and it mean that u are still on MF3.....for MF3 root method u need to use .....JORTEX ROOT METHOD......and if u have SuperSu pro .....then u can active that survival mode ......if u don't then u need follow my thread ..................
| ★ UPDATE.ZIP ★ | ►MF3★AT&T★MK2◄ | ★ UNBRICKED ★ | ★ Jan.01.2014 ★ | from OP i added SAFEROOT METHOD link ( that's why FAILED for u coz i'm thinking u not 4.3 MK2 user yet) ......Use MF3.tar if u like to go back to stock MF3 from first post.......refer to img below for your guide where the files need to be place..........and then from there u can try to update to 4.3 MK2 if u like just download MF3>MK2 update.zip....and check post#2 for guide how to update......and if u ever brick ( i hope not ) check on post #3.....GOODLUCK......:good::good:
Definitely on mk2 bro.. mf3 is what I got after ota from mdb. Thought it was mk2 because of the size...I had mf3 rooted just no rom on it yet but of signal issues. Now I'm on mk2 with with a supersu installed from mf3 dat I can't get rid of or update its binaries. So what I will have to do is go back to mf3 n come back up again. I have tried factory resets followed by update.zip for mk2. Always comes back with supersu. I'll keep u posted bro. Speaking to u from the U.S. Virgin Islands
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
trouty said:
Definitely on mk2 bro.. mf3 is what I got after ota from mdb. Thought it was mk2 because of the size...I had mf3 rooted just no rom on it yet but of signal issues. Now I'm on mk2 with with a supersu installed from mf3 dat I can't get rid of or update its binaries. So what I will have to do is go back to mf3 n come back up again. I have tried factory resets followed by update.zip for mk2. Always comes back with supersu. I'll keep u posted bro. Speaking to u from the U.S. Virgin Islands
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Factory reset doesn't affect the /system partition at all. Ted's update .zip will give you a completely clean 4.3 MK2 if you follow the steps in post #3. That's how i've reset mine a few times.
Little noob on this type of things..i am using SGH-I337 stock 4.2.2(MF3) and i am stuck on it.. although i am using AT&T product some how managed to unlock sim and using it in INDIA .Samsung Kies is not helping in stock updates and some one Let me know how to stock update now..!!... searched whole web couldnt understand anything.. properly..want to be on stock 4.3 ...Tnx in Advance .. plz help Newbie!!
161 4423988
Or is there any way to remove At& T carrier from my SGHI337(mf3) and get the kies update work?
rajpru said:
Little noob on this type of things..i am using SGH-I337 stock 4.2.2(MF3) and i am stuck on it.. although i am using AT&T product some how managed to unlock sim and using it in INDIA .Samsung Kies is not helping in stock updates and some one Let me know how to stock update now..!!... searched whole web couldnt understand anything.. properly..want to be on stock 4.3 ...Tnx in Advance .. plz help Newbie!!
Click to expand...
Click to collapse
Just go into the general section and use either the Update.zip thread or the ODIN files for MK2.
rajpru said:
Little noob on this type of things..i am using SGH-I337 stock 4.2.2(MF3) and i am stuck on it.. although i am using AT&T product some how managed to unlock sim and using it in INDIA .Samsung Kies is not helping in stock updates and some one Let me know how to stock update now..!!... searched whole web couldnt understand anything.. properly..want to be on stock 4.3 ...Tnx in Advance .. plz help Newbie!!
Click to expand...
Click to collapse
DeadlySin9 said:
Just go into the general section and use either the Update.zip thread or the ODIN files for MK2.
Click to expand...
Click to collapse
Second to @DeadlySin9 said. ... Here the link to my thread ......http://forum.xda-developers.com/showthread.php?t=2621279 for updating or odin to MK2 stock 4.3 firmware......:thumbup:
Swyped from MK2 Dark Venomous X1
ted77usa said:
Second to @DeadlySin9 said. ... Here the link to my thread ......http://forum.xda-developers.com/showthread.php?t=2621279 for updating or odin to MK2 stock 4.3 firmware......:thumbup:
Swyped from MK2 Dark Venomous X1
Click to expand...
Click to collapse
Thanks for the reply.. and the problem here is if i do this method.. ill be getting back to AT&T stock but i dun want AT& T carrier so Best way to avoid AT&T and get the Indian s4 stock update? so it will help me here to keep up to date with the help of Kies
rajpru said:
Thanks for the reply.. and the problem here is if i do this method.. ill be getting back to AT&T stock but i dun want AT& T carrier so Best way to avoid AT&T and get the Indian s4 stock update? so it will help me here to keep up to date with the help of Kies
Click to expand...
Click to collapse
You couples options:
1. Update to MK2 firmware first | ★ MK2 ★ FULL ODIN TAR FILES ★ MK2 ★ | ★ UNBRICKED ★ Jan.25.2014 ★ | check post#2 on guide how to.....:good:
2. After u updated.....u need to have root access to remove all ATT bloatware ....use this SAFEROOT METHOD
3. After u have root access then u can install Titanium Backup from Play store that required root access....and u just uninstall any ATT bloatware that u don't want from there that start with ATT or end with ATT apk or any other that u don't like or use ( Be careful and make sure u know what u are doing ).
4. U can also install the ONLY recovery that work for MK2 as of right now ................SafeStrap-v3.7.1
5. If u have SafeStrap recovery installed then u can choose over 20+ Custom 4.3 ROM that u can install and doesn't come with ATT bloatware...Check this MK2 INDEX &ROM LIST by @guut13 ....
GOODLUCK.....HOPE THIS HELP U GET IT UPDATE AND SOLVE YOUR PROBLEM.....:good:
ted77usa said:
You couples options:
1. Update to MK2 firmware first | ★ MK2 ★ FULL ODIN TAR FILES ★ MK2 ★ | ★ UNBRICKED ★ Jan.25.2014 ★ | check post#2 on guide how to.....:good:
2. After u updated.....u need to have root access to remove all ATT bloatware ....use this SAFEROOT METHOD
3. After u have root access then u can install Titanium Backup from Play store that required root access....and u just uninstall any ATT bloatware that u don't want from there that start with ATT or end with ATT apk or any other that u don't like or use ( Be careful and make sure u know what u are doing ).
4. U can also install the ONLY recovery that work for MK2 as of right now ................SafeStrap-v3.7.1
5. If u have SafeStrap recovery installed then u can choose over 20+ Custom 4.3 ROM that u can install and doesn't come with ATT bloatware...Check this MK2 INDEX &ROM LIST by @guut13 ....
GOODLUCK.....HOPE THIS HELP U GET IT UPDATE AND SOLVE YOUR PROBLEM.....:good:
Click to expand...
Click to collapse
i think u helped me a lot.. let me try on them thanks dude .. i hope it i will work.. and hope kies will show up my phone
Thank You!!
ted77usa said:
You couples options:
1. Update to MK2 firmware first | ★ MK2 ★ FULL ODIN TAR FILES ★ MK2 ★ | ★ UNBRICKED ★ Jan.25.2014 ★ | check post#2 on guide how to.....:good:
2. After u updated.....u need to have root access to remove all ATT bloatware ....use this SAFEROOT METHOD
3. After u have root access then u can install Titanium Backup from Play store that required root access....and u just uninstall any ATT bloatware that u don't want from there that start with ATT or end with ATT apk or any other that u don't like or use ( Be careful and make sure u know what u are doing ).
4. U can also install the ONLY recovery that work for MK2 as of right now ................SafeStrap-v3.7.1
5. If u have SafeStrap recovery installed then u can choose over 20+ Custom 4.3 ROM that u can install and doesn't come with ATT bloatware...Check this MK2 INDEX &ROM LIST by @guut13 ....
GOODLUCK.....HOPE THIS HELP U GET IT UPDATE AND SOLVE YOUR PROBLEM.....:good:
Click to expand...
Click to collapse
Thnx to Ted at last it worked out for me.. but i couldnt go out at&t carrier and kies still not able to gimme a update info on firmware it is just leaving a me a msg tht current firmware cannot be updated via kies.. But hopefully i am on MK2 update!!
Starting i had lots of troubles with ODIN and USB drivers.. But got a new USB cable and worked everything fine..if u can able to solve 1 more problem ill be most thankfull i.e i want to get indian firmware tht is GT-19505 or GT-19500 firmware's on SGH-I337 ill be happy ..so tht ill be always updated with my country updates
rajpru said:
if u can able to solve 1 more problem ill be most thankfull i.e i want to get indian firmware tht is GT-19505 or GT-19500 firmware's on SGH-I337 ill be happy ..so tht ill be always updated with my country updates
Click to expand...
Click to collapse
Unfortunately it is not possible. If you ever try to flash a i9505 firmware you would brick your device. Because the ATT i337 has locked bootloaders for one, and second is it is different as far as firmware because of the boot loader.
What you MAY be able to do is if you use safe strap for MK2 you might be able to find a ROM you can flash that doesn't have all the ATT bloatware. With the ATT bloatware removed it would basically be the same as a i9505. But kies will never work except IF ATT allows Samsung to start putting the firmware files on kies, it seems like ATT doesn't allow it any longer.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
RockRatt said:
Unfortunately it is not possible. If you ever try to flash a i9505 firmware you would brick your device. Because the ATT i337 has locked bootloaders for one, and second is it is different as far as firmware because of the boot loader.
What you MAY be able to do is if you use safe strap for MK2 you might be able to find a ROM you can flash that doesn't have all the ATT bloatware. With the ATT bloatware removed it would basically be the same as a i9505. But kies will never work except IF ATT allows Samsung to start putting the firmware files on kies, it seems like ATT doesn't allow it any longer.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
Click to expand...
Click to collapse
THanks for u r the suggestion bro.... i dont want safestrap on my mobile it may eat some space for partition i think!!
Safestrap is the ONLY recovery that we can use as of right now for MK2 firmware. ...... as long as you follow MK2 INDEX & ROM LIST by @guut13. .... alot of custom 4.3 rom that able to flash on Stock Slot by now ..... meaning that u don't have to share system partition in it. ..... and u would have all the internal memory storage. .... Unless if you create rom slot 1 or 2 then u have limited internal memory storage ..... since your stock rom slot still in place. .....:thumbup:
Swyped from MK2 Dark Venom SS Edition
Hey guys,
I've got a rooted s4 with mf3 on it currently and was wondering what the safest way to get to nb1 would be. I have no recovery installed. Just rooted and left it alone.
Any help would be appreciated.
Thanks.
First try unrooting in the supersu app
darktranquility18 said:
Hey guys,
I've got a rooted s4 with mf3 on it currently and was wondering what the safest way to get to nb1 would be. I have no recovery installed. Just rooted and left it alone.
Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
@darktranquility18
Follow my thread http://forum.xda-developers.com/showthread.php?t=2621279 check post #2 to update to MK2 and then try check your phone for an OTA update or u can download update.zip files from my other thread http://forum.xda-developers.com/showthread.php?t=2663545 to update to NB1.... PM me If comes up error or u need more help...... GoodLuck.....:thumbup::thumbup:
EDIT : @plunplan .....YES
Swyped From MK2 Dark Venom Hybrid SS Edition
ted77usa said:
@darktranquility18
Follow my thread http://forum.xda-developers.com/showthread.php?t=2621279 check post #2 to update to MK2 and then try check your phone for an OTA update or u can download update.zip files from my other thread http://forum.xda-developers.com/showthread.php?t=2663545 to update to NB1.... PM me If comes up error or u need more help......GoodLuck.....:thumbup::thumbup:
Swyped From MK2 Dark Venom Hybrid SS Edition
Click to expand...
Click to collapse
This mean i can safely flash MK2 using ODIN coming from MF3?
plunplan said:
This mean i can safely flash MK2 using ODIN coming from MF3?
Click to expand...
Click to collapse
Yes you can, download the all in one tar and flash it in Odin PDA slot.
jd1639 said:
Yes you can, download the all in one tar and flash it in Odin PDA slot.
Click to expand...
Click to collapse
Perfect thanks!
cleared