Related
I just unlocked/rooted my Nexus 7. I downloaded CleanROM3.0, but before I wanted to flash it, I wiped everything. Now there is No Rom installed and my Clean ROM file is gone. I want to put it back on my device through TWRP but the mount to my PC is not working. I can see it in device manager, but it's unknown and no file explorer opens up for it. How can I get the file back on it??? Help please. Is there a driver I'm missing for it to mount properly in TWRP?
danman132x said:
I just unlocked/rooted my Nexus 7. I downloaded CleanROM3.0, but before I wanted to flash it, I wiped everything. Now there is No Rom installed and my Clean ROM file is gone. I want to put it back on my device through TWRP but the mount to my PC is not working. I can see it in device manager, but it's unknown and no file explorer opens up for it. How can I get the file back on it??? Help please. Is there a driver I'm missing for it to mount properly in TWRP?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1781250
follow that guide, will get you back to stock then start again, and dont erase sd card next time! just factory reset to go from stock to CleanROM
danman132x said:
I just unlocked/rooted my Nexus 7. I downloaded CleanROM3.0, but before I wanted to flash it, I wiped everything. Now there is No Rom installed and my Clean ROM file is gone. I want to put it back on my device through TWRP but the mount to my PC is not working. I can see it in device manager, but it's unknown and no file explorer opens up for it. How can I get the file back on it??? Help please. Is there a driver I'm missing for it to mount properly in TWRP?
Click to expand...
Click to collapse
Put the ROM zip file in your Android SDK/platform-tools directory on your computer. Open a command prompt window, change directories to your Android SDK/platform-tools location (for me that's: cd sdk/platform-tools) and type in:
Code:
adb push <name of ROM zip> /sdcard
Wait about 30-60 seconds until it's done, then flash your ROM. It'll be on the root of your internal storage (/sdcard).
I think, you have to flash a factory image by using adb.
Sent from my Nexus 7 using xda premium
I'm in my bootloader and hooked up the USB cable. Trying to use adb, but the device is not showing up when trying to pull up the list of ADB devices. Starting to get worried now. Can't mount in TWRP, and now it can't find the device in my ADB. It found the device just fine when I had it booted up before while I was doing the unlock/root process.
Nico_60 said:
I think, you have to flash a factory image by using adb.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
danman132x said:
I'm in my bootloader and hooked up the USB cable. Trying to use adb, but the device is not showing up when trying to pull up the list of ADB devices. Starting to get worried now. Can't mount in TWRP, and now it can't find the device in my ADB. It found the device just fine when I had it booted up before while I was doing the unlock/root process.
Click to expand...
Click to collapse
You need to use fastboot commands to flash .img files via the bootloader. Try typing in:
Code:
fastboot devices
Please review this thread: http://forum.xda-developers.com/showthread.php?t=1907796
RMarkwald said:
You need to use fastboot commands to flash .img files via the bootloader. Try typing in:
Code:
fastboot devices
Please review this thread: http://forum.xda-developers.com/showthread.php?t=1907796
Click to expand...
Click to collapse
I am having the same problem, but with a Kindle Fire 2. When I wiped, it took out my new Rom, and I cannot mount in TWRP...
And, it won't boot the stock ROM. To make matters worse, I cannot see the device in ADB!
Joe
yudanjah said:
I am having the same problem, but with a Kindle Fire 2. When I wiped, it took out my new Rom, and I cannot mount in TWRP...
And, it won't boot the stock ROM. To make matters worse, I cannot see the device in ADB!
Joe
Click to expand...
Click to collapse
You should ask in the kindle fire 2 forums as some advice may be hardware specific.
I everyone,
I was installing a font and by accident caused it to reboot midway install and now my rom won't boot, it just hangs on paranoid logo.
I need to transfer the rom file and gapps although I don't know how to access the file directory so I can transfer from PC to phone in recovery or download mode.
Any ideas? I use clockworkwork mod and dont have option to mount usb.
ps I'm on a mac.
T89 said:
I everyone,
I was installing a font and by accident caused it to reboot midway install and now my rom won't boot, it just hangs on paranoid logo.
I need to transfer the rom file and gapps although I don't know how to access the file directory so I can transfer from PC to phone in recovery or download mode.
Any ideas? I use clockworkwork mod and dont have option to mount usb.
ps I'm on a mac.
Click to expand...
Click to collapse
Use adb sideload
place the rom in the platform-tools folder, wipe, then from recovery select adb sideload then run adb sideload nameofrom.zip
Guys help me!
I install android 4.3 on my phone, however I did not do the backup and by mistake I've downloaded the wrong rom, now my phone a message appears in the bootloader "in the OS installed"
I'm desperate with my phone only in recovery mode, please help me fix!
sprafael said:
Guys help me!
I install android 4.3 on my phone, however I did not do the backup and by mistake I've downloaded the wrong rom, now my phone a message appears in the bootloader "in the OS installed"
I'm desperate with my phone only in recovery mode, please help me fix!
Click to expand...
Click to collapse
Do you have a custom recovery installed? If so, load a .zip rom and push it via custom recovery...
.... If not, use ADB to push a reflash of a clean install of 4.3
instructions here my thread
http://forum.xda-developers.com/showthread.php?t=2376681
More info.what Phone mark modelo etc ?
Sent from my XT910 using Tapatalk 4 Beta
mc704 said:
Do you have a custom recovery installed? If so, load a .zip rom and push it via custom recovery...
.... If not, use ADB to push a reflash of a clean install of 4.3
instructions here my thread
http://forum.xda-developers.com/showthread.php?t=2376681
Click to expand...
Click to collapse
i do not have a custom recovery, the only thing it has in the cell and the image I downloaded wrong, my phone is in recovery screen that comes with it when I turn the volume button, after that I do not know what else to do, because I have no how to transfer the image to the correct cell to update, so I need to know how to transfer the image to the correct device
sprafael said:
i do not have a custom recovery, the only thing it has in the cell and the image I downloaded wrong, my phone is in recovery screen that comes with it when I turn the volume button, after that I do not know what else to do, because I have no how to transfer the image to the correct cell to update, so I need to know how to transfer the image to the correct device
Click to expand...
Click to collapse
if you are able to boot to recovery. you have to be in fast boot...
you can either use fastboot to flash over
or
boot into recovery and apply a rom via ADB sideload
mc704 said:
if you are able to boot to recovery. you have to be in fast boot...
you can either use fastboot to flash over
or
boot into recovery and apply a rom via ADB sideload
Click to expand...
Click to collapse
how to apply the room via ADB SIDE load, because I saw that option, so I do not know how to use
sprafael said:
how to apply the room via ADB SIDE load, because I saw that option, so I do not know how to use
Click to expand...
Click to collapse
open command prompt with adb loaded
type adb sideload romname.zip
the rom should be in the same folder the adb/fastboot tools are located
mc704 said:
open command prompt with adb loaded
type adb sideload romname.zip
the rom should be in the same folder the adb/fastboot tools are located
Click to expand...
Click to collapse
the fastboot do you explain this link??
http://forum.xda-developers.com/showthread.php?t=2376681
I'm downloading the android SDK at this time
let's see if I understand
put the phone in adb sideload
will open the CMD in the fastboot folder,
type in adb sideload image-occam-jwr66v.zip
Flashable zip not factory image, try cm10
Sent from my Nexus 4 using xda app-developers app
Hello! My first post here on the forum
So I've got this problem that my Samsung Galaxy S4 won't boot properly after the rom install.
The recovery I've been using is CWM and after the install when I press reboot the phone vibrates and the "Samsung Galaxy S4 GT-I9505" screen shows up and then the phone immediately shuts down again. Now I can't get the phone to start... :/
Thanks, Joakim.
juckeyy said:
Hello! My first post here on the forum
So I've got this problem that my Samsung Galaxy S4 won't boot properly after the rom install.
The recovery I've been using is CWM and after the install when I press reboot the phone vibrates and the "Samsung Galaxy S4 GT-I9505" screen shows up and then the phone immediately shuts down again. Now I can't get the phone to start... :/
Thanks, Joakim.
Click to expand...
Click to collapse
Do a data factory reset reflash the rom again and clear the caches and reboot. Which rom did you flash?
gee2012 said:
Do a data factory reset reflash the rom again and clear the caches and reboot. Which rom did you flash?
Click to expand...
Click to collapse
Hmm alright, I tried to flash 4.2.2 google edition. But the problem is now when I go into recovery my phone can't find any ROM to install.
It feels like it's broken. And I've got no adapter for the micro-SD card so I manually can put in a rom to the SD :/
I can get in to the CWM recovery but in "install zip update package -> choose ZIP from sdcard" there is nothing. So all I can do is try to get a rom into the external SD and flash from there?
juckeyy said:
Hmm alright, I tried to flash 4.2.2 google edition. But the problem is now when I go into recovery my phone can't find any ROM to install.
It feels like it's broken. And I've got no adapter for the micro-SD card so I manually can put in a rom to the SD :/
I can get in to the CWM recovery but in "install zip update package -> choose ZIP from sdcard" there is nothing. So all I can do is try to get a rom into the external SD and flash from there?
Click to expand...
Click to collapse
Yes, do that. Power down the phone, take the sdcard out and place a rom on it, boot into recovery and flash it in CWM. If that gives problems flash a stock rom in downloadmode with Odin.
juckeyy said:
Hmm alright, I tried to flash 4.2.2 google edition. But the problem is now when I go into recovery my phone can't find any ROM to install.
It feels like it's broken. And I've got no adapter for the micro-SD card so I manually can put in a rom to the SD :/
I can get in to the CWM recovery but in "install zip update package -> choose ZIP from sdcard" there is nothing. So all I can do is try to get a rom into the external SD and flash from there?
Click to expand...
Click to collapse
push rom with adb. (you must have adb file on your pc)
boot into custom recovery, connect your phone, put the rom in with adb folder, open cmd prompt in the adb folder and type:
Code:
adb devices
you must see serial number
Code:
adb push name_of_rom.zip /data/media/
or
Code:
adb push name_of_rom.zip /sdcard/
Code:
adb reboot recovery
then install the rom
samersh72 said:
push rom with adb. (you must have adb file on your pc)
boot into custom recovery, connect your phone, put the rom in with adb folder, open cmd prompt and type:
Code:
adb devices
you must see serial number
Code:
adb push name_of_rom.zip /data/media/
or
Code:
adb push name_of_rom.zip /sdcard/
Code:
adb reboot recovery
then install the rom
Click to expand...
Click to collapse
I`am out of thanks and will thank you tomorrow, wasn`t sure adb sideload worked on Samsung devices (i now it works on HTC, Sony and Nexus devices)
gee2012 said:
I`am out of thanks and will thank you tomorrow, wasn`t sure adb sideload worked on Samsung devices (i now it works on HTC, Sony and Nexus devices)
Click to expand...
Click to collapse
NVM my friend
adb commands work in custom recovery mode even if "usb debugging" is disabled.
it is just a simple push to sd :good:
EDIT: @gee2012 can you do me a favor, since i dont have my s4 with me right now, can you try if adb recognized your phone in custom recovery mode?? i just want to be sure
Code:
adb devices
thx
gee2012 said:
Yes, do that. Power down the phone, take the sdcard out and place a rom on it, boot into recovery and flash it in CWM. If that gives problems flash a stock rom in downloadmode with Odin.
Click to expand...
Click to collapse
Hmm, couldnt find my adapter. Is there no way to flash in the stock rom with odin?
samersh72 said:
push rom with adb. (you must have adb file on your pc)
boot into custom recovery, connect your phone, put the rom in with adb folder, open cmd prompt in the adb folder and type:
Code:
adb devices
you must see serial number
Code:
adb push name_of_rom.zip /data/media/
or
Code:
adb push name_of_rom.zip /sdcard/
Code:
adb reboot recovery
then install the rom
Click to expand...
Click to collapse
Hmm wow seems like a long process but i'll try it.
Thanks!
samersh72 said:
NVM my friend
adb commands work in custom recovery mode even if "usb debugging" is disabled.
it is just a simple push to sd :good:
EDIT: @gee2012 can you do me a favor, since i dont have my s4 with me right now, can you try if adb recognized your phone in custom recovery mode?? i just want to be sure
Code:
adb devices
thx
Click to expand...
Click to collapse
No bro, the device is OFFLINE. You would have checked the box first when the device was on in usb mode. Like you have to with a nexus (fingerprint).
gee2012 said:
No bro, the device is OFFLINE. You would have checked the box first when the device was on in usb mode. Like you have to with a nexus (fingerprint).
Click to expand...
Click to collapse
are you sure you are in custom recovery??
no, you need usb debugging enabled only when the OS is booted.
in custom recovery, you will see the serial number with "recovery" at the right in cmd
adb in custom recovery works fine with my SII plus
Code:
C:\Users\Samer\Desktop>adb devices
List of devices attached
014E1E761000700C recovery
C:\Users\Samer\Desktop>
thank you my friend
samersh72 said:
are you sure you are in custom recovery??
no, you need usb debugging enabled only when the OS is booted.
in custom recovery, you will see the serial number with "recovery" at the right in cmd
adb in custom recovery works fine with my SII plus
thank you my friend
Click to expand...
Click to collapse
Wait one minute bro.
samersh72 said:
are you sure you are in custom recovery??
no, you need usb debugging enabled only when the OS is booted.
in custom recovery, you will see the serial number with "recovery" at the right in cmd
adb in custom recovery works fine with my SII plus
Code:
C:\Users\Samer\Desktop>adb devices
List of devices attached
014E1E761000700C recovery
C:\Users\Samer\Desktop>
thank you my friend
Click to expand...
Click to collapse
Hey when I type in adb devies it says mine is unauthorized :/
samersh72 said:
push rom with adb. (you must have adb file on your pc)
boot into custom recovery, connect your phone, put the rom in with adb folder, open cmd prompt in the adb folder and type:
Code:
adb devices
you must see serial number
Code:
adb push name_of_rom.zip /data/media/
or
Code:
adb push name_of_rom.zip /sdcard/
Code:
adb reboot recovery
then install the rom
Click to expand...
Click to collapse
Yes, you`re right. The serialnumber is shown in recovery mode after typing adb devices in cmd. Was on stock ( + stock recovery) and not rooted.
Sorry it took so long. I have usb debugging enabled btw.
-Edit- also with usb debugging disabled the serialnumber is shown.in recovery.
juckeyy said:
Hey when I type in adb devies it says mine is unauthorized :/
Click to expand...
Click to collapse
make sure you have the right driver for samsung
you must have custom recovery and not stock recovery to be recognized by adb command
use the latest adb file version (attached)
make sure that your phone in custom recovery mode
put the rom into adb folder and open cmd in that folder
push the rom
gee2012 said:
Yes, you`re right. The serialnumber is shown in recovery mode after typing adb devices in cmd. Was on stock ( + stock recovery) and not rooted.
Sorry it took so long. I have usb debugging enabled btw.
Click to expand...
Click to collapse
+1
it will not recognize your phone in stock recovery :good:
EDIT: yes, enabling usb debugging is used only when your phone is booted in os
samersh72 said:
make sure you have the right driver for samsung
you must have custom recovery and not stock recovery to be recognized by adb command
use the latest adb file version (attached)
make sure that your phone in custom recovery mode
put the rom into adb folder and open cmd in that folder
push the rom
+1
it will not recognize your phone in stock recovery :good:
EDIT: yes, enabling usb debugging is used only when your phone is booted in os
Click to expand...
Click to collapse
I've got the right driver, my phone is in CWM recovery and rom is in the adb folder.
What do you mean with "open cmd in that folder"?
juckeyy said:
I've got the right driver, my phone is in CWM recovery and rom is in the adb folder.
What do you mean with "open cmd in that folder"?
Click to expand...
Click to collapse
open adb folder where the rom included.
"shift" + mouse right click, choose "open command window here"
download adb.zip 1.0.31 attached in my previous post, if you dont have it
samersh72 said:
open adb folder where the rom included.
"shift" + mouse right click, choose "open command window here"
download adb.zip 1.0.31 attached in my previous post, if you dont have it
Click to expand...
Click to collapse
I did still didnt work. Now I managed to get a ROM into my SD-card so now i'll boot custom recovery and try to install.
lets hope for the best!
Hey again!
Just wanna thank everybody for the help. I solved everything with flashing in stock ROM with odin.
I'll try again tomorrow with other ROM:s
Thanks, Joakim.
had same problem
hi there my s4 done the same after trying to install cy 10.1
I made a back up first with cwm
then went to install cy 10.1 rom after it said it was done I reboot and got the same problem
I took out my battery waited couple of mins and booted up in cwm mode then went to restore and installed my back up
alls working again but still have not found a fix to install custom roms.
fezz64 said:
hi there my s4 done the same after trying to install cy 10.1
I made a back up first with cwm
then went to install cy 10.1 rom after it said it was done I reboot and got the same problem
I took out my battery waited couple of mins and booted up in cwm mode then went to restore and installed my back up
alls working again but still have not found a fix to install custom roms.
Click to expand...
Click to collapse
Is it the same with other roms?
Make sure the download is not corrupted.
Wipe data, cache and dalvic after flashing the rom, reboot
sent from my Galaxy
So I decided to install PA 4.6 BETA4 on my Nexus 4, 4.3 JWR66Y Phone which is unlocked and rooted. I used the Nexus Root Toolkit to install the latest TWRP recovery, put the pa_mako-4.6-BETA4-20141007.zip and pa_gapps-stock-4.4.4-20141011-signed.zip onto my phone. Went into recovery to flash the two. The PA ROM went successful, tried flashing the gapps and it just says failed. I tried redoing the ROM flash then gapps again but that doesn't work.
I had the dumb idea of moving my nandroid backup to my computer and now I can't transfer it back to my phone using adb sideload. I go into ADB sideload in TWRP, and it just says no devices found when trying to transfer maually. When I try using NRToolkit, it fails as well.
Any advice? I feel like I've searched everywhere. I don't know what the next step to take is. Maybe Flash Stock + Unroot option on the NRToolkit? Have I somehow flashed incompatible zip files?
sirmot said:
So I decided to install PA 4.6 BETA4 on my Nexus 4, 4.3 JWR66Y Phone which is unlocked and rooted. I used the Nexus Root Toolkit to install the latest TWRP recovery, put the pa_mako-4.6-BETA4-20141007.zip and pa_gapps-stock-4.4.4-20141011-signed.zip onto my phone. Went into recovery to flash the two. The PA ROM went successful, tried flashing the gapps and it just says failed. I tried redoing the ROM flash then gapps again but that doesn't work.
I had the dumb idea of moving my nandroid backup to my computer and now I can't transfer it back to my phone using adb sideload. I go into ADB sideload in TWRP, and it just says no devices found when trying to transfer maually. When I try using NRToolkit, it fails as well.
Any advice? I feel like I've searched everywhere. I don't know what the next step to take is. Maybe Flash Stock + Unroot option on the NRToolkit? Have I somehow flashed incompatible zip files?
Click to expand...
Click to collapse
UPDATE: I got the gapps to install successfully. I installed Wifi File Explorer through NRToolkit in order to transfer files to my phone. And transferred the same exact file to my phone. I tried flashing the file and it worked... I'm guessing the wired transfer corrupted the file somehow. Thank you NRT for that option to install apks.
Hi,
Good to know that you managed to get it working . Could you add a [SOLVED] tag on the title of your thread?
Also, I'd like to point out that when you tried to copy the backup file via adb sideload it had a reason to not work! Adb sideload was born to flash zips which are transfered via adb to the device. Loading then as soon as they are loaded. To copy the files back to your device using adb you should have used the "adb push" command, which is like a "copy/paste" on the shell . Hope this helps in the future.
~Lord
XxLordxX said:
Hi,
Good to know that you managed to get it working . Could you add a [SOLVED] tag on the title of your thread?
Also, I'd like to point out that when you tried to copy the backup file via adb sideload it had a reason to not work! Adb sideload was born to flash zips which are transfered via adb to the device. Loading then as soon as they are loaded. To copy the files back to your device using adb you should have used the "adb push" command, which is like a "copy/paste" on the shell . Hope this helps in the future.
~Lord
Click to expand...
Click to collapse
Ah of course that makes sense. I think I tried just pushing the file when I was in the bootloader as well, but it also gave me devices not found. Not sure why, but anyways thanks for the reply. Hopefully this might help out someone.
sirmot said:
Ah of course that makes sense. I think I tried just pushing the file when I was in the bootloader as well, but it also gave me devices not found. Not sure why, but anyways thanks for the reply. Hopefully this might help out someone.
Click to expand...
Click to collapse
Hi,
In bootloader you mean fastboot right? If so, you can't use adb on this mode. To push a file via fastboot is only the stock image using "fastboot install" or "fastboot boot".
~Lord
"Dream On! Dream Until Your Dreams Come True!" - Dream On (Aerosmith)
Sent from my GT-I9505
XxLordxX said:
Hi,
In bootloader you mean fastboot right? If so, you can't use adb on this mode. To push a file via fastboot is only the stock image using "fastboot install" or "fastboot boot".
~Lord
"Dream On! Dream Until Your Dreams Come True!" - Dream On (Aerosmith)
Sent from my GT-I9505
Click to expand...
Click to collapse
Oh I see. So the adb push can only be used when the phone is on normally and connected via adb? Is there a way to transfer files to a phone if it were stuck in fastboot?
sirmot said:
Oh I see. So the adb push can only be used when the phone is on normally and connected via adb? Is there a way to transfer files to a phone if it were stuck in fastboot?
Click to expand...
Click to collapse
Hi,
If you're stuck in fastboot you can flash a recovery or use the "fastboot boot" to boot in recovery and then use adb push from there .
~Lord