So i need a SELinux Permissive KERNEL for the Galaxy Note III SM-N9005, that doesnt have bugs like that WiFi isnt working, or Camera isnt working, or Force Close of Apps or so. The best i found was the WonderChild Kernel, only problem was that the Camera wasnt working at all, and it ran hot like a baked pizza after some time. Else it was great, the other that i found also set my SELinux to Permissive, but has WiFi and Force Closing issue. Is there ANY kernel out there that is almost problem free? Cause i NEED SELinux on Permissive. I found a way to set SELinux to Permissive without any KERNEL, but the STOCK ROM doesnt support init.d afaik, so it resets everytime i reboot. (Now the problem is im stuck at the same problem as the other guy, i get when i i try to run the script: chmod /sys/fs/selinux/enforce "Permission Denied") Here: http://forum.xda-developers.com/showthread.php?t=2471416&page=7
If anyone knows a way, how to set SELinux to Permissive, that works on reboot (best is just having a KERNEL that does that), please tell me. Thanks
yanniclord said:
So i need a SELinux Permissive KERNEL for the Galaxy Note III SM-N9005, that doesnt have bugs like that WiFi isnt working, or Camera isnt working, or Force Close of Apps or so. The best i found was the WonderChild Kernel, only problem was that the Camera wasnt working at all, and it ran hot like a baked pizza after some time. Else it was great, the other that i found also set my SELinux to Permissive, but has WiFi and Force Closing issue. Is there ANY kernel out there that is almost problem free? Cause i NEED SELinux on Permissive. I found a way to set SELinux to Permissive without any KERNEL, but the STOCK ROM doesnt support init.d afaik, so it resets everytime i reboot. (Now the problem is im stuck at the same problem as the other guy, i get when i i try to run the script: chmod /sys/fs/selinux/enforce "Permission Denied") Here: http://forum.xda-developers.com/showthread.php?t=2471416&page=7
If anyone knows a way, how to set SELinux to Permissive, that works on reboot (best is just having a KERNEL that does that), please tell me. Thanks
Click to expand...
Click to collapse
CivZ Rev 3.2
radicalisto said:
CivZ Rev 3.2
Click to expand...
Click to collapse
Perhaps you missunderstood, Note 3 not Note 8.0 Tablet. Please give me a link to the mod/kernel if its for Note 3. Thanks
yanniclord said:
Perhaps you missunderstood, Note 3 not Note 8.0 Tablet. Please give me a link to the mod/kernel if its for Note 3. Thanks
Click to expand...
Click to collapse
I use it on my note 3 have done for a while, Here it is and for future reference and updates go HERE it's in his custom ROM thread..
radicalisto said:
I use it on my note 3 have done for a while, Here it is and for future reference and updates go HERE it's in his custom ROM thread..
Click to expand...
Click to collapse
Sorry, havent mentioned it, i try to STAY at STOCK. NO Custom ROM, only KERNEL or Mods. But i like the ROM, i may try it some time.
Edit: ok the ROM seems awesome, thanks, i just hope it doesnt remove the Boot Sound, thats one of the features i like at the Note 3
Related
Known that most of Galaxy S5 SM-G900H Exynos users has come to Lollipop. But due to some reason I need a custom kernel to set SElinux mode from Enforcing to Permissive.
I wrote this thread is to ask a favor, if anyone has or want to do a similar thing, please share your work, experiences for everyone who has same demand/needed.
Million Thanks
I too need the Permissive mode. I tried SELinuxModeChanger, as suggested by others and also Synapse but they don't do anything. You can change it in the app from Enforcing to Permissive but as soon as you close the app or click on the apply it jumps back to Enforce mode.....
Me too...
Frann7824 said:
Me too...
Click to expand...
Click to collapse
Have you tried one of these kernels?
https://forum.xda-developers.com/ga...opment-exynos/kernel-crazyaquakernel-t3668606
https://forum.xda-developers.com/ga...lopment-exynos/kernel-duki994-kernel-t3427167
They are for android MM.
Does anybody know a way to make Viper4Android work on roms with new firmware like XXUHPF1. I'm using MBP V5 by melekbarca on the i9500. I already have try unchecking the mount separate option in super su but didn't work. Also tried this in other roms like albe95 and inferno but no luck.
I apologize for my English and my lack of experience.
Because, most probably, the selinux is set to enforcing. Viper4Android needs to to be permissive.
GDReaper said:
Because, most probably, the selinux is set to enforcing. Viper4Android needs to to be permissive.
Click to expand...
Click to collapse
Thank you for your answer but I don't think that's the problem cause I have try using Setlinux mode changer and also had try with versions of viper that don't require permissive kernell and nothing works.
GDReaper said:
Because, most probably, the selinux is set to enforcing. Viper4Android needs to to be permissive.
Click to expand...
Click to collapse
Well actually it seems you were right. I try installing different kernels but had no luck; till I installed stock Permissive Kernel By @AL_IRAQI (http://forum.xda-developers.com/showpost.php?p=59507846&postcount=4860) and untick the separate mount option in super su. Now it works :laugh: . Thanks for the answer
Good to know you solved your problem.
To be noted that stock Samsung kernel is always enforcing, even after you use SELinux mode changer to change your SELinux status.
Sent from my ASUS_Z00AD using XDA Labs
Hello there, my english is the worst but I'll try to explain,
Im a newbie, I dont know that dev terms, terminal and script use and etc that you guys do
Its just simple, I need to use some apps that says my phone need to be permissive mode, my cellphone is rooted with a 3.0.2 twrp on it.
is it possible set to permissive without install a custom rom? I don want to change my stock rom cause I'm affraid glitchs and etc
I've try some apps i've found here on xda, like selinux switch, selinux change etc but anything work
I already search here, but thanks to my bad english its difficult to me got good results and understand whats the guys says about that problem.
Mine is a j5000-m android 6.0.1. I dont have problem with lil modifications if it needed, I just dont want to change my hole rom. Thank you guys
Shadoowz said:
Hello there, my english is the worst but I'll try to explain,
Im a newbie, I dont know that dev terms, terminal and script use and etc that you guys do
Its just simple, I need to use some apps that says my phone need to be permissive mode, my cellphone is rooted with a 3.0.2 twrp on it.
is it possible set to permissive without install a custom rom? I don want to change my stock rom cause I'm affraid glitchs and etc
I've try some apps i've found here on xda, like selinux switch, selinux change etc but anything work
I already search here, but thanks to my bad english its difficult to me got good results and understand whats the guys says about that problem.
Mine is a j5000-m android 6.0.1. I dont have problem with lil modifications if it needed, I just dont want to change my hole rom. Thank you guys
Click to expand...
Click to collapse
Have u tried with kernel adiutor? I never used stock permissive kernel, but u can tweak the Corsicanu or Bulgaricus kernels very straightforward to stay permissive...
I suggest u to update your TWRP to lastest and official one for our device 3.1.1. by Vince.
Also using the command "getenforce"u can change selinux state, but u said don't understand using terminal...
I try this kernel auditor, but i dont found anything about selinux on it, i have terminal installed as well, ive try what ive found on another topic about comands (setenforce 0 etc) but it doesnt work, I dont know anything about this kernel thing will it change my phone? UI, apps etc?
Shadoowz said:
I try this kernel auditor, but i dont found anything about selinux on it, i have terminal installed as well, ive try what ive found on another topic about comands (setenforce 0 etc) but it doesnt work, I dont know anything about this kernel thing will it change my phone? UI, apps etc?
Click to expand...
Click to collapse
Kernel will not change your ROM, it's like changing the motor of your car for example.
There's plenty of TouchWiz kernels for j5 from Bulgaricus and Corsicanu, as they're custom kernels for stock, they have different settings and options than stock kernel lacks of. With kernel adiutor you will find selinux option in some of them if not all.
Taivotat2 said:
Kernel will not change your ROM, it's like changing the motor of your car for example.
There's plenty of TouchWiz kernels for j5 from Bulgaricus and Corsicanu, as they're custom kernels for stock, they have different settings and options than stock kernel lacks of. With kernel adiutor you will find selinux option in some of them if not all.
Click to expand...
Click to collapse
How do I change this Kernel? Do you have a download link? Whats the best?
its everithing ok now, I change the kernel, its permisive and my apps works ok thanks...
Shadoowz said:
its everithing ok now, I change the kernel, its permisive and my apps works ok thanks...
Click to expand...
Click to collapse
Nice.
Most of us using custom roms, it will be helpful for me if anyone can suggest me some roms which has Permissive selinux status.
Having some problems with enforcing and problems still remains even after changing selinux.
that's why I'm stucked in a rom and can't shift because most roms comes with enforcing selinux.
tested so many roms but can't solve audio problem that's why need some rom that comes with permissive selinux by default.
any one facing same problem?
Everything working fine with enforcing selinux for me. Perhaps a complete clean flash with latest firmware might fix your problem. Otherwise you can use permissive selinux module.
farhanshaikh671 said:
Everything working fine with enforcing selinux for me. Perhaps a complete clean flash with latest firmware might fix your problem. Otherwise you can use permissive selinux module.
Click to expand...
Click to collapse
as i told tried every single solutions I got from here and there, also this solution but not worked. now I'm kind of hopeless and searching for roms that comes with permissive.
DinIslamJoy said:
as i told tried every single solutions I got from here and there, also this solution but not worked. now I'm kind of hopeless and searching for roms that comes with permissive.
Click to expand...
Click to collapse
you can try borets rom. It has an option to manually enable/disable enforcing selinux.
farhanshaikh671 said:
you can try borets rom. It has an option to manually enable/disable enforcing selinux.
Click to expand...
Click to collapse
thanks a lot
Which custom will better then stock rom for my XOOTD device.
pls suggest me.
Official Lineage OS 16 released for our device. It theoretically should give better performance than stock.
You may consider installing latest colt rom. Not only it meets your requirements but also can be used as a daily driver.
Use nxp.zip and get audio problem fixed
Just wondering if SElinux has to be set to permissive for everything to work? In using H910 variant. Fingerprint works. If It can be set to enforcing, how do I change it? I used permissiver.zip to change it to permissive and don't know how to change it back if I need to. Any help is appreciated. Thanks. Also safetynet passes right now and using LSposed.
did you find the answer to this? the zach selinux zip I normally use on stock does not work for me.
ezzony said:
did you find the answer to this? the zach selinux zip I normally use on stock does not work for me.
Click to expand...
Click to collapse
Never found an answer... I have a OnePlus 7t pro now. It was a post that I read though, that said it had to be permissive for everything to work properly. Not sure though
^^Yeah well who knows. Driving me crazy. Could be a bug in the latest build. Giving me a real headache trying to work it out. I'm going to try using the lineage recovery instead of twrp and if that don't work I'll give up. Thanks, and ohh a 7tPro sounds nice : )
ezzony said:
^^Yeah well who knows. Driving me crazy. Could be a bug in the latest build. Giving me a real headache trying to work it out. I'm going to try using the lineage recovery instead of twrp and if that don't work I'll give up. Thanks, and ohh a 7tPro sounds nice : )
Click to expand...
Click to collapse
It's very nice, just no fully functional TWRP that I can find yet... Only usable to flash ROMs basically
parag0n1986 said:
It's very nice, just no fully functional TWRP that I can find yet... Only usable to flash ROMs basically
Click to expand...
Click to collapse
it's didn't work. I got kernel crash using lineage recovery. So even the recovery is not working for me. This is going well lol. Phew I was able to flash back twrp via fastboot.
Right, and all of a sudden seems problem is solved.
By complete chance I was reading this https://forum.xda-developers.com/t/conversion-of-lg-v20-f800.4161453/#post-84791351
There is a link to a flashable zip to set selinux policy permissive. A different one to the one I usually use by @Zachpth5. This allows the camera driver to load.
https://drive.google.com/file/d/1CRgp7awT86MfRTE2Os1h6fcc7MfPkeLV/view?usp=sharing
Edit: just use selinuxmodechanger apk instead. Can't belive I didn't know about that app 'till now lol