Hello,
My phone is an HTC EVO 3d.
I was replacing the bezel...(the frame around the display)
And I damaged the digitizer, it works but has dead spots every 1cm...
Everything else works, but the phone reboots every 10mins.
I have a custom rom, but cant install anything else, because much of them require touch input to install.
What can I do?
I already ordered the digitizer, but maybe that wont fix the problem, I just hope it's the os problem, but I reinstalled it. (it didn't require touch input)
THe phone does not reboot when on usb power or plugged to pc.
Related
This morning, my touch screen suddenly stopped working. Hardware keys are still working but device is not responding when the screen is touched. Already tried a hard reset but no success, now I am stuck at the align display screen. Also can no longer get to the bootmenu, so can't reflash my device! Any suggestions on what's wrong or how this can be fixed? Thanks for any help!!!!
I'm curious
Didn't you see any spots (like oil spots on the water) to the touch screen ?
I had the same problem .I replaced the touch screen and the phone is working again .
No, nothing, was working fine at night, when i woke up just randomly stopped working. The display is not cracked or anything, so wondering whether a screen replacement will do the trick? ALso strange that I can no longer get to the bootscreen to enter HardSPL...
Had the same problem, the issue (with mine anyhow) was the digitizer, which is an overlay that sits on top of the actual LCD screen to give it touch capability....
good post here
http://forum.xda-developers.com/showthread.php?t=392301&highlight=digitizer
I had a similar problem,
To get past the Align screen I had to apply pressure to the top of the screen opposite side of front facing camera - then use the screen as normal
I reflashed the original rom (manually getting to bootloader) - it worked for a bit but ended up sending is back to 02 for repair.
All they did apparently, was to reflash the ROM again and its been working since.
Had the same problem a couple of times a while ago, when i was trying out WM6.5.
All buttons worked but not the touch screen. Never really found out exactly what the problem was, but the first time I managed to get it working again by resetting the alignment:
While gps button pressed (under green button), press center D-pad button this will bring you to alignment screen.
The other time the "alignment trick" didn't work, but i got it working again, after flashing the original ROM couple of times. (And doing hard reset between each time)
I think I used this ROM
You say you can't get to the boot menu, do you run hard-SPL?
most likely its an hardware issue - had this one too, of course out of nowhere!
flash with original rom and if you cannot align screen (as the hardware seems to be broken) send it in for repair. it will be under guarantee, if screen isnt broken.
I had similar problem, I passed the alignment but i had a huge offset in the touch.
I replaced the touch screen and it solved the problem.
You can find it in ebay for 1 US $.
nogge69 said:
You say you can't get to the boot menu, do you run hard-SPL?
Click to expand...
Click to collapse
Thanks for all the help guys!!! I do run hard-SPL and have flashed many ROMS - just don't know why it won't enter the bootscreen anymore when I reset the device and press the camera button. Did manage to upload original ROM again by using activesync, now trying to restore original hard-SPL so I can send off the device for repair.
Hi, i had also the same problem, i find a threat in the internet... try to push the upper corners on the device with your fingers and then tab on the screen to see if the problem solved.
I had the same issue.
Its more than likely your digitizer. I tried flashing 100 different roms but always stuck at the align screen stage.
I actually have the barely used digitizer if anyone wants it (for a few dollars of course hehe) My mainboard died a couple of weeks after i installed the digitizer.
needless to say i moved away from the ****ty build quality of HTC to the MUCH better build quality of the iPhone.
I have a Sprint Touch [Vogue]. It has served me very well up until recently.
One day, I was using my phone normally when the battery died. No big deal right?
Well, I charge my phone and reboot it. For some reason, Windows is EXTREMELY slow and unresponsive. I figure that something vital had been corrupted by the battery's death, and that it was nothing that a hard reset couldn't fix.
I performed a hard reset.
I let the utilities for the first boot run to customize the phone. Everything seemed pretty much normal. I configured my settings, re-added my contacts, etc. Then I turned the screen off [with the power button].
I turn it back on later to do something. I touch the screen. It immediately and accurately detects the touch's location, but it continues detecting a touch. For 20-30 seconds, after the input has stopped.
It was strange, so I soft reset the device. It booted, with the same problem. So I performed another hard reset. I did some configuration [the response acting normal at this point], and then turned the screen off. Turning it back on brought the same problem back.
This problem still exists on my phone, even after numerous hard resets and even ROM flashes.
A better description of the problem: When the device is first turned back on [meaning brought out of standby], its touch response is messed up. It will immediately and accurately detect any touch input, but it will continue to detect the input for up to 30 seconds AFTER it has been released, as if you were holding it the whole time.
WHY is this???? My phone is almost unusable because of this!!!! I can still place/ receive calls, using the navigation buttons and the red and green buttons. But the touch response is screwed!
Can someone please shed some light on this problem I'm having?
Phone specs: Windows Mobile 6.1, HTC / Sprint customized. Minimal third party software is currently installed.
[I've already determined that third party software is not the problem, because i haven't installed any!]
Possible solution
Hi,
today I experienced something similar to your description - no touch response when I tried to pickup a call. The strange thing is that last night everything was working and no settings were modified nor programs were added/removed. The screen suddenly 'died'. At the moment I am using it through a program MyMobiler which brings the mobile display to the PC and I can use the mouse to control the phone (it is like VNC for the phone screen, the phone is connected with ActiveSync).
This is temporary solution untill I finish my backups of files, programs, settings. I didnot performed hard reset yet, hope this will solve my problem
In the following link there is a 'magical' solution - to remove the screen protector:
http://www.htcwiki.com/thread/1112981/LCD+or+Touch+screen+not+working
P.S. I had removed the screen protector and voilá - the screen is now touch responsive. The root cause of the problem obviously is the dust between the screen and the protector which results in constant screen pressing - and as a result no accepting my finger presses.
I hope this will work for you and others with similar problem.
I had a similar experience with an old Vogue.....In my case, there was no battery death precursor, but it just started acting up. Not too long thereafter, I noticed the screen/digitizer was forming what looked like an air bubble between the digitizer and the LCD on one place of the screen. The screen was becoming defective. I eventually had to buy another Vogue from a friend who didn't have a clue of the 6900's potential, and didn't want his anymore, so I got it cheap.
Sounds like your screen/digitizer may be on it's last leg.
Hello! Today suddenly the screen on my HTC Legend stopped working. More exactly it went black, with just a few pixels in different colors and some random striped... I've tried to remove the battery, plug it into my computer, remove the memory card, remove the sim-card etc.etc. nothing seems to bring it back to life... when i press the power button i can sense the phone vibrating and responding to touches on the screen. Seems the phone itself is working fine and that the screen is just broken in some way. Could it be possible that this has something to do with that the phone is rooted and flashed with different ROMs like thousands of times?
I'm considering returning it to the store, since I still have one year warranty left but I'm afraid I won't get a new one if they discover it is rooted
Anyone who's got any good ideas what to do to make the screen work again? Is it possible to factory reset it from the computer?
If you have s-off its easy peasy, otherwise you could downgrade using the goldcard method.In my experience HTC still repair even if it is rooted as they dotn really check, just plug it into there computers then reflash
Hello everybody,
i have a problem with my hd2.. my touchscreen doesnt react anymore. My phone crashed yesterday and i rebooted it. After that, i cant push any "button" on the screen. even after a complete wipe of my hd2 and a installation of a new android rom, it doesnt react
Is my screen faulty or is it a "software problem"?
Thanks for your help.
I think your is touchscreen dead or the touchscreen cable is loose.
http://www.ifixit.com/Device/HTC_HD2_PB81120
Hello,
Yesterday my rooted LG v20 h990ds got a kernel crash (green screen). I pulled the battery and after that I noticed no difference.
Today I woke up and noticed that the phone was really slow. Somehow the touchscreen was not always responsive so I had to lock and unlock it again.
I couldn't figure out what it was and I thought that maybe it was caused by the root. So I did a factory reset and went back to stock (LGUP). Unfortunately the problem is still there. Does anybody know what it is? Could it be a hardware defective?
Thanks in advance!
edit:
After a few tests it seems to be the digitizer. I've installed an app to test the digitizer.
Sometimes the screen sees a short touch as a long touch. That's why it opens extra options when I try to type a letter.
I've opened up the phone to see if there was any moisture damage visible, fortunately that was not the case.
Is it still possible that this is a software problem? Or do I have to buy a new screen?
edit 2:
The phone is functioning normally again. I disconnected the screen cable and plugged it back in again. Probably it was a loose contact.
This thread can be closed