Hi,
I have a GS3 from Amazon in the UK. I havnt recieved the 4.3 update yet so I decided to check the CSC code which was set to TTT :crying: (Trinidad and Tobago). The update hasnt been released in TTT yet so I want to change the CSC to BTU. The phone is NOT rooted. I have tried a few apps plus the *#272*IMEI# but non work . Can anyone please tell me how to do it?/??
Thanks in advance
amolak1999 said:
Hi,
I have a GS3 from Amazon in the UK. I havnt recieved the 4.3 update yet so I decided to check the CSC code which was set to TTT :crying: (Trinidad and Tobago). The update hasnt been released in TTT yet so I want to change the CSC to BTU. The phone is NOT rooted. I have tried a few apps plus the *#272*IMEI# but non work . Can anyone please tell me how to do it?/??
Thanks in advance
Click to expand...
Click to collapse
You can use this app to change your CSC. However, two things.
A. You need to be rooted beyond XXELLA
B. Your selected rom needs to support multi csc
( tried that before but doesn't work as its unrooted and on stock software
amolak1999 said:
( tried that before but doesn't work as its unrooted and on stock software
Click to expand...
Click to collapse
It should work, but you need to root if you're on XXELLA or above
Sorry not that much of a techie :silly: what is XXELLA? So it doesn't need to be rooted? Because when i press change CSC it comes up with com.android.preconfig not found on your device and takes me to the dialer with *#272*1759# already punched in?? After ringing that I get Connection problem or invalid MMI code.
amolak1999 said:
Sorry not that much of a techie :silly: what is XXELLA? So it doesn't need to be rooted? Because when i press change CSC it comes up with com.android.preconfig not found on your device and takes me to the dialer with *#272*1759# already punched in?? After ringing that I get Connection problem or invalid MMI code.
Click to expand...
Click to collapse
Xxella would be a 4.1.2 firmware.
It would look like your stock setup doesn't have a multi CSC setup so I'm not sure if you're able to change to BTU
Sent from my GT-I9300 using Tapatalk
amolak1999 said:
Sorry not that much of a techie :silly: what is XXELLA? So it doesn't need to be rooted? Because when i press change CSC it comes up with com.android.preconfig not found on your device and takes me to the dialer with *#272*1759# already punched in?? After ringing that I get Connection problem or invalid MMI code.
Click to expand...
Click to collapse
if I am not wrong you need:
(1) be rooted to change the CSC
(2) after that you can use the tool mentioned before and/or flash a BTU rom
or maybe easier:
just flash the newest 4.3 rom version (you can do this without root as well I think)
Flash the latest 4.3 rom for the UK, using odin and following the guide in sticky thread.
Factory reset from recovery, reboot and csc should match the firmware.
Sent from my GT-I9300 using Tapatalk
chrismast said:
if I am not wrong you need:
(1) be rooted to change the CSC
(2) after that you can use the tool mentioned before and/or flash a BTU rom
or maybe easier:
just flash the newest 4.3 rom version (you can do this without root as well I think)
Click to expand...
Click to collapse
Hi can you please tell me how to flash the latest 4.3 without rooting please?
amolak1999 said:
Hi can you please tell me how to flash the latest 4.3 without rooting please?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1646610
Download the latest 4.3 for UK - which would be - I9300XXUGMK6. Then follow instructions in the first post
blazevxi said:
http://forum.xda-developers.com/showthread.php?t=1646610
Download the latest 4.3 for UK - which would be - I9300XXUGMK6. Then follow instructions in the first post
Click to expand...
Click to collapse
I'm pretty sure this method will default the CSC to "KOR"
You want to flash the ELL4 U.K. firmware from the stock firmware thread. Download the S2/S3 CSC changer app from the play store and set the CSC to BTU.
This will factory reset the device, so make sure you have your important files backed up.
Then proceed to flash MK6 4.3. Now everything will match.
electrotune1200 said:
I'm pretty sure this method will default the CSC to "KOR"
You want to flash the ELL4 U.K. firmware from the stock firmware thread. Download the S2/S3 CSC changer app from the play store and set the CSC to BTU.
This will factory reset the device, so make sure you have your important files backed up.
Then proceed to flash MK6 4.3. Now everything will match.
Click to expand...
Click to collapse
Do you think If I took the device to Carphone Warehouse would they be able to change the CSC??
amolak1999 said:
Do you think If I took the device to Carphone Warehouse would they be able to change the CSC??
Click to expand...
Click to collapse
Do it yourself man.... It's easy.
electrotune1200 said:
Do it yourself man.... It's easy.
Click to expand...
Click to collapse
How?? I don't wanna void the warranty
amolak1999 said:
How?? I don't wanna void the warranty
Click to expand...
Click to collapse
If you flash a untouched 4.3 rom thru odin it does not void the warranty. It will read official in Odin. At least on my phone it did. Like they said earlier they should have a uk version floating around somewhere. Otherwise just leave it alone and wait for the update. I hope that helps
Related
Hi everyone, i encounter a problem earlier. Basically i rooted my phone days ago and i m still using stock rom without flashing custom roms. So i eager to try out the mod from Omega thread and install the Omega file from google play. After downloaded the mod (for omega rom) of scrolling wallpaper for TW and i flashed it. Booting up my phone with TW not responding, force close. Try again and again still cant boot into menu. I know i m stupid that didn't do a NAND backup before flashing it, and now i m stuck at this force close thing. So i found out out there there is a stock official rom XXUBMEA, i was previously from XXUAME2, can i flash this rom with odin?What is the complete process i need to do to flash this stock rom? Appreciate that you can help me so i can get back my phone!!
snoopy5 said:
Hi everyone, i encounter a problem earlier. Basically i rooted my phone days ago and i m still using stock rom without flashing custom roms. So i eager to try out the mod from Omega thread and install the Omega file from google play. After downloaded the mod (for omega rom) of scrolling wallpaper for TW and i flashed it. Booting up my phone with TW not responding, force close. Try again and again still cant boot into menu. I know i m stupid that didn't do a NAND backup before flashing it, and now i m stuck at this force close thing. So i found out out there there is a stock official rom XXUBMEA, i was previously from XXUAME2, can i flash this rom with odin?What is the complete process i need to do to flash this stock rom? Appreciate that you can help me so i can get back my phone!!
Click to expand...
Click to collapse
Yes u can flash the firmware if its for the same version u are having using ODIN
http://forum.xda-developers.com/showthread.php?t=2265477&highlight=stock+firmware\
use the above link incase u wanna find more details abt stock firmware etc
Download the stock firmware u wanna install ope ODIN select the firmware thru PDA connect ur device in download mode make sure u have all drivers install once in download mode if the device is detected press start and let it do its work
Do unzip the firmware if its a Zip file and the file will be .tar
omiemer fed
123hiten said:
Yes u can flash the firmware if its for the same version u are having using ODIN
http://forum.xda-developers.com/showthread.php?t=2265477&highlight=stock+firmware\
use the above link incase u wanna find more details abt stock firmware etc
Download the stock firmware u wanna install ope ODIN select the firmware thru PDA connect ur device in download mode make sure u have all drivers install once in download mode if the device is detected press start and let it do its work
Do unzip the firmware if its a Zip file and the file will be .tar
Click to expand...
Click to collapse
Thanks bro, anyway I'm from Singapore, and i would like to try out the latest firmware(GERMANY DBT I9505XXUBMEA), am i good to go for this 1? is there any problem if i flash this stock rom? Appreciate your help!! :good:
snoopy5 said:
Thanks bro, anyway I'm from Singapore, and i would like to try out the latest firmware(GERMANY DBT I9505XXUBMEA), am i good to go for this 1? is there any problem if i flash this stock rom? Appreciate your help!! :good:
Click to expand...
Click to collapse
No problem u can use that also it will work remember every time u flash it increases counter incase u visit a Samsung service centre u need to reset that using a tool Triangle away which works with root but this is later part incase u need for now u go ahead and flash it
Sent from my GT-I9500 using xda premium
123hiten said:
No problem u can use that also it will work remember every time u flash it increases counter incase u visit a Samsung service centre u need to reset that using a tool Triangle away which works with root but this is later part incase u need for now u go ahead and flash it
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Thousand thanks bro. Last question, will the flashing of this stock rom reset all my setting including the message, contact number and etc and finally roll back to unroot?
snoopy5 said:
Thousand thanks bro. Last question, will the flashing of this stock rom reset all my setting including the message, contact number and etc and finally roll back to unroot?
Click to expand...
Click to collapse
It will not delete the setting apps data etc since u are flashing with odin
However after flashing u make whatever data backup u need and reset the device completely so that the csc will match the new firmware and will work with kies
Sent from my GT-I9500 using xda premium
123hiten said:
It will not delete the setting apps data etc since u are flashing with odin
However after flashing u make whatever data backup u need and reset the device completely so that the csc will match the new firmware and will work with kies
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Hi bro, i have a doubt, first of all i must say thank you for your guide and finally i can successfully flash the latest fw. My doubt is that, is that necessary to do a full reset? and what actually csc will related to my fw? lastly, really thanks for your help to guide through a newbie!!
snoopy5 said:
Hi bro, i have a doubt, first of all i must say thank you for your guide and finally i can successfully flash the latest fw. My doubt is that, is that necessary to do a full reset? and what actually csc will related to my fw? lastly, really thanks for your help to guide through a newbie!!
Click to expand...
Click to collapse
its not exactly req to do a full reset but good if u do any issue u were facing b4 will be vanished
and full reset and start will make all changes in CSC etc
snoopy5 said:
Hi bro, i have a doubt, first of all i must say thank you for your guide and finally i can successfully flash the latest fw. My doubt is that, is that necessary to do a full reset? and what actually csc will related to my fw? lastly, really thanks for your help to guide through a newbie!!
Click to expand...
Click to collapse
You can extract csc from the stock firmwares. What carrier are you on?
lzk123 said:
You can extract csc from the stock firmwares. What carrier are you on?
Click to expand...
Click to collapse
how can i extract from stock firmwares? i just flash with I9505XXUBMEA so you mean i need to extract from this firmwares? anyway i'm from singapore and i believe my phone is not locked to any carrier.
snoopy5 said:
how can i extract from stock firmwares? i just flash with I9505XXUBMEA so you mean i need to extract from this firmwares? anyway i'm from singapore and i believe my phone is not locked to any carrier.
Click to expand...
Click to collapse
I believe you must flash the Singapore or near region Stock ROM.
Disturbed™ said:
I believe you must flash the Singapore or near region Stock ROM.
Click to expand...
Click to collapse
My stock rom suppose is I9505XXUAMEA2 if not mistaken and i rooted it last time, while i was flashing some mod just find out my TW launcher force stop and i need to use easy home mode. i mess up with it. saw the post said latest firmwares release which my country will not get it soon and i decided to flash GERMANY I9505XXUBMEA firmwares. surprisingly i din face with any problem like wifi not working, 4g lte non working and etc. everything just fine. i guess is my luck not to gone through factory reset to make CSC work?
snoopy5 said:
My stock rom suppose is I9505XXUAMEA2 if not mistaken and i rooted it last time, while i was flashing some mod just find out my TW launcher force stop and i need to use easy home mode. i mess up with it. saw the post said latest firmwares release which my country will not get it soon and i decided to flash GERMANY I9505XXUBMEA firmwares. surprisingly i din face with any problem like wifi not working, 4g lte non working and etc. everything just fine. i guess is my luck not to gone through factory reset to make CSC work?
Click to expand...
Click to collapse
Singapore I9505XXUBMEA firmware is out today. I'm also using the Germany version currently.
Hi folks, I wanna update my device to I9505XXUBMEA (for App-to-SD), but don't know how to exactly. I want to do it in the most legal way, without erasing anything (Apps, Data, Settings etc.) on my S4.. So can someone tell & show me the best way how to do this please?
Btw I'm from the Netherlands and got my phone here, so I don't know if I can use or need the Stock Firmware and/or Kernel File from Germany's XXUBMEA update and if it's compatible without bricking my phone or losing data, because I havn't seen any I9505XXUBMEA update for my country yet..
Thank you in advance.
_Android_Freak_ said:
Hi folks, I wanna update my device to I9505XXUBMEA (for App-to-SD), but don't know how to exactly. I want to do it in the most legal way, without erasing anything (Apps, Data, Settings etc.) on my S4.. So can someone tell & show me the best way how to do this please?
Btw I'm from the Netherlands and got my phone here, so I don't know if I can use or need the Stock Firmware and/or Kernel File from Germany's XXUBMEA update and if it's compatible without bricking my phone or losing data, because I havn't seen any I9505XXUBMEA update for my country yet..
Thank you in advance.
Click to expand...
Click to collapse
Download the rom from the topic and use odin to flash it http://forum.xda-developers.com/showthread.php?t=2252855
German firmware will work, used the german one and the poland one on my S3 (and i live in the Netherlands too)
MichelN said:
Download the rom from this site and use odin to flash it http://forum.xda-developers.com/showthread.php?t=2252855
Click to expand...
Click to collapse
There isn't any I9505 XXUBMEA Update for the Netherlands available in there.. I've checked that thread already =(
_Android_Freak_ said:
There isn't any I9505 XXUBMEA Update for the Netherlands available in there.. I've checked that thread already =(
Click to expand...
Click to collapse
Why not use the latest firmware ? I9505XXUBMF8
MichelN said:
Why not use the latest firmware ? I9505XXUBMF8
Click to expand...
Click to collapse
Does it support App to SD-Card movement and will my data not be deleted?
_Android_Freak_ said:
Does it support App to SD-Card movement and will my data not be deleted?
Click to expand...
Click to collapse
1. Yes
2. Yes
MichelN said:
1. Yes
2. No
Click to expand...
Click to collapse
So.. each (Official) Firmware which I install on my S4 will delete all data on my phone?
_Android_Freak_ said:
So.. each (Official) Firmware which I install on my S4 will delete all data on my phone?
Click to expand...
Click to collapse
No, nothing will be deleted unless you do a factory reset.
BTW: I misread your post haha, thought you said ''will it delete my data''.
MichelN said:
No, nothing will be deleted unless you do a factory reset.
BTW: I misread your post haha, thought you said ''will it delete my data''.
Click to expand...
Click to collapse
Ohh thank God.. i seriously was doubting now to continue any further, since I would've to Re-apply all setting and download all Apps and Data once again.. :good:
Now, I dont know what the Kernel is used for.. but do I need to get that also? After I have the 1.6 GB sized Stock Firmware (aka ROM right?), I can start installing?
I'm downloading I9505XXUBMF8 (first one on the list, most recent one) than from the Official Rom Collection (Thread).
I've got myself Odin also (File name: AndroidJinn.Com.Odin307, Size: 1,15 MB) like you said. (Please confirm if its the right one)
If it's not to much asked, could you write within a few sentences, the steps on how to get trough the installation and what I need to do before starting, like: do I need to backup anything or does my phone have to be USB plugged to my pc the whole time etc.?
http://forum.xda-developers.com/showthread.php?t=2265477
sent from my Galaxy
Will flashing an official firmware via odin with another CSC void the warranty or not??
Well.. can someone at least tell me how I can check if my phone is factory unlocked and if I need the Kernel file also or not please.. ty.
Sent from my GT-I9505 using xda premium
talal_zaki said:
Will flashing an official firmware via odin with another CSC void the warranty or not??
Click to expand...
Click to collapse
It depends on the service center. Some dont look to csc if it is stock. And some look. Any way you can flash your original firmware back.
_Android_Freak_ said:
Well.. can someone at least tell me how I can check if my phone is factory unlocked and if I need the Kernel file also or not please.. ty.
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
If it can accept another sim so it is unbranded firmware.
Any way, you can flash any stock for your I9505. Kernel is included in the firmware, no need tp flash it seperately
Sent from my GT-S5360 using xda app-developers app
Another question: I have USB debugging turned on, but do I also need to select/apoint a App to it or not? May look like a newbish question, but I want to do everything correctly, w/o damaging my phone.. if you get me.
Sent from my GT-I9505 using xda premium
_Android_Freak_ said:
Another question: I have USB debugging turned on, but do I also need to select/apoint a App to it or not? May look like a newbish question, but I want to do everything correctly, w/o damaging my phone.. if you get me.
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
No need to enable usb debugging when flashing with odin
Sent from my N91 using xda app-developers app
Can someone tell me why again XXUBMF8 is better than XXUBMEA?
I mean what are the differences compared to one another,
the only thing I know is that they both support App-2-Sd.
Which is actually ofcourse the most important thing to know,
but what other <better improved> features does the XXUBMF8 (DBT) have than XXUBMEA (DBT)?
And how are overall user experiences with both versions?
Hi All,
I have a Galaxy note 3 - N9005 LTE 32 GB.
It had JB installed however i wanted to instal KK on it so i downloaded the Germany KItkat fimrware NB4 and after flashing Odin says Fail!
I cheked Autoreboot & Reset Time.
Appreciate all the help you can give to solve this issue.
Also - if the answer will contain refrences to other firmwares include links coz i have been searching for POLAND firmware however icannot find where to download it.
Thanks
newapostlenew said:
Hi All,
I have a Galaxy note 3 - N9005 LTE 32 GB.
It had JB installed however i wanted to instal KK on it so i downloaded the Germany KItkat fimrware NB4 and after flashing Odin says Fail!
I cheked Autoreboot & Reset Time.
Appreciate all the help you can give to solve this issue.
Also - if the answer will contain refrences to other firmwares include links coz i have been searching for POLAND firmware however icannot find where to download it.
Thanks
Click to expand...
Click to collapse
What country code are you on now? This German (DBT) suppose to be for unbranded phones, but people have problems flashing this. Keeps getting fail in Odin. I'm having this too and I'm standing back for the moment awaiting solution.
You can flash the Polish (XEO) NB3 and the file can be downloaded from sammobile.com/firmwares
Sent from my SM-N9005 using Tapatalk
mikkelrev69 said:
What country code are you on now? This German (DBT) suppose to be for unbranded phones, but people have problems flashing this. Keeps getting fail in Odin. I'm having this too and I'm standing back for the moment awaiting solution.
You can flash the Polish (XEO) NB3 and the file can be downloaded from sammobile.com/firmwares
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply.
I am in the middle east (Saudi) - but my phone is carrier unlocked.
Polish firmware works? i mean you didnt get the error with that.
Thanks
MQ
mikkelrev69 said:
What country code are you on now? This German (DBT) suppose to be for unbranded phones, but people have problems flashing this. Keeps getting fail in Odin. I'm having this too and I'm standing back for the moment awaiting solution.
You can flash the Polish (XEO) NB3 and the file can be downloaded from sammobile.com/firmwares
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Can you furnish a more specific link? This link is linking to S4 and i am having a hard time finding the correct frimware.
Appreciate your help.
newapostlenew said:
Can you furnish a more specific link? This link is linking to S4 and i am having a hard time finding the correct frimware.
Much Appreciate your help.
Click to expand...
Click to collapse
Thank you
Couple of questions
1- The poland firmware works for sure? or does that render odin to fail as well?
2 - Can i install 4.3 firmware stock? if yes can you pls share a link.
Appreciate your help.
newapostlenew said:
Can you furnish a more specific link? This link is linking to S4 and i am having a hard time finding the correct frimware.
Appreciate your help.
Click to expand...
Click to collapse
The sammobile.com/firmwares are for all Samsung phones. Fill in N9005 in the fw search box to search firmwares.
Sent from my SM-N9005 using Tapatalk
mikkelrev69 said:
The sammobile.com/firmwares are for all Samsung phones. Fill in N9005 in the fw search box to search firmwares.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thanks i was able to locate the firmware in question right here on XDA as SAMMOBILE i encounter download issues/dead pages. Here is the link
http://forum.xda-developers.com/showthread.php?t=2647861&page=2 (for anybody else visiting this page.
Also - can i revert back to 4.3 and flash that?
Thanks
newapostlenew said:
Thanks i was able to locate the firmware in question right here on XDA as SAMMOBILE i encounter download issues/dead pages. Here is the link
http://forum.xda-developers.com/showthread.php?t=2647861&page=2 (for anybody else visiting this page.
Also - can i revert back to 4.3 and flash that?
Thanks
Click to expand...
Click to collapse
There is no returning to 4.3 once you have upgraded your bootloader to 4.4.2
radicalisto said:
There is no returning to 4.3 once you have upgraded your bootloader to 4.4.2
Click to expand...
Click to collapse
Thanks. I am currently dldlng. Hopefully this works.
You'll be OK with the Polish firmware it works fine
radicalisto said:
You'll be OK with the Polish firmware it works fine
Click to expand...
Click to collapse
You mentioned nogo to 4.3 due to bootloader however i dindt check the bootloader option in odin (see screenshot). Should i tick that as well next time?
Well there is some debate as to if you should check the bootloader or not.
With the leaked Polish firmware it came in seperate files. You needed to check to upgrade the Bootloader.
With the XEO single .zip firmware you don't need to check it as it upgrades automatically - plenty agree with this. -- There is a few people who say that by not checking it, it hasn't upgraded for them and some just recommend you check it for good luck sake.
radicalisto said:
Well there is some debate as to if you should check the bootloader or not.
With the leaked Polish firmware it came in seperate files. You needed to check to upgrade the Bootloader.
With the XEO single .zip firmware you don't need to check it as it upgrades automatically - plenty agree with this. -- There is a few people who say that by not checking it, it hasn't upgraded for them and some just recommend you check it for good luck sake.
Click to expand...
Click to collapse
Thanks Radicalisto.
Lets see how it goes. Fingers crossed.
Normally after the odin flash, all apps/data etc are there? If not what is the best/tried method of backup without root?
Thanks
radicalisto said:
You'll be OK with the Polish firmware it works fine
Click to expand...
Click to collapse
Does this rom suffer from any battery drain issues? or in general any issues? this isnt beta so i suppose none should exist.
No drain issues no, pretty decent build tbh.
belerephont said:
Normally after the odin flash, all apps/data etc are there? If not what is the best/tried method of backup without root?
Thanks
Click to expand...
Click to collapse
You mean the NEO one which radicalisto mentioned? if the former than ill update once i try this as i am re downloading it again. People should seriously use drop box instead of Mega.
newapostlenew said:
. People should seriously use drop box instead of Mega.
Click to expand...
Click to collapse
MEGA is country based per account. So if I upload to my MEGA it comes from a UK Server which is slow to Asia/America etc, trick is to set up your own MEGA account, and then import it from the download MEGA link and it'll switch to a server in your country and you'll get faster download speeds
radicalisto said:
MEGA is country based per account. So if I upload to my MEGA it comes from a UK Server which is slow to Asia/America etc, trick is to set up your own MEGA account, and then import it from the download MEGA link and it'll switch to a server in your country and you'll get faster download speeds
Click to expand...
Click to collapse
shucks! i am downloading - i have a 50Mbps fiber line however for the reason you mentioned i am downloading from a non account. Next time ill use my account. Thanks for that again.
Hi
I noticed that my Note 4 (910C) does not have the COACH by Cigna in S health. While my friend phone same 910c but have the COACH by Cigna in S-health.
Ive searched a lot about this isuue but no luck. I did removed the update for s health and installed it again but no luck.
Any one could share the experiance or solution to this issue.
moon800 said:
Hi
I noticed that my Note 4 (910C) does not have the COACH by Cigna in S health. While my friend phone same 910c but have the COACH by Cigna in S-health.
Ive searched a lot about this isuue but no luck. I did removed the update for s health and installed it again but no luck.
Any one could share the experiance or solution to this issue.
Click to expand...
Click to collapse
Open your S Health application, touch the menu that is at top left corner, then, touch to "coach". Complete the rest.
The problem is that i there is no coach icon. !
That why i need some help.
Ok either you need to edit your Csc because it depends on location or install this xposed mod
http://forum.xda-developers.com/xposed/modules/mod-global-s-health-enable-s-health-t2993601
moon800 said:
The problem is that i there is no coach icon. !
That why i need some help.
Click to expand...
Click to collapse
Simple install PHONE INFO app from play store in your & your friends mobile, match firmware version, download firmware from sammobile.com, flash threw odin, this way u will have everything like your friend & knox will not get tripped.
Simple install PHONE INFO app from play store in your & your friends mobile, match firmware version, download firmware from sammobile.com, flash threw odin, this way u will have everything like your friend & knox will not get tripped.
Click to expand...
Click to collapse
I've tried this method but I did not work. do I need to change CSC code using phone info ? and does it need a root to change the CSC code using phone info
moon800 said:
I've tried this method but I did not work. do I need to change CSC code using phone info ? and does it need a root to change the CSC code using phone info
Click to expand...
Click to collapse
If you flash full rom(your friends csc) downloaded from sammobile.com u don't need csc separately.
Are you rooted? If you are it's a very simple fix. The coach in shealth is location dependant. If you flash a btu firmware through odin then you should get it without tripping knox
sawdoctor said:
Are you rooted? If you are it's a very simple fix. The coach in shealth is location dependant. If you flash a btu firmware through odin then you should get it without tripping knox
Click to expand...
Click to collapse
If i m not mistaking btu uk don't have 910C model, Poland xeo has this model but don't know about Coach.
jdomadia said:
If i m not mistaking btu uk don't have 910C model, Poland xeo has this model but don't know about Coach.
Click to expand...
Click to collapse
I mean you want a generic rom unbranded. I thought btu was the Csc for generic unbranded phones. Other than using odin to flash a rom that has coach enabled I think you may well have to root
I have a EGY CSC.i need to change my CSC .because EGY has not received any updates since march.so how can i do it ?can i do it without breaking OTA?any help please
Just flash a different firmware via ODIN, no need to change CSC
CuBz90 said:
Just flash a different firmware via ODIN, no need to change CSC
Click to expand...
Click to collapse
If i flash BTU one will it break OTA?my product code ends with EGY(samsung phone info product code under CSC tab) is it okay?
dinuka_haxxor said:
If i flash BTU one will it break OTA?my product code ends with EGY(samsung phone info product code under CSC tab) is it okay?
Click to expand...
Click to collapse
Same question I have
---------- Post added at 04:17 PM ---------- Previous post was at 04:16 PM ----------
CuBz90 said:
Just flash a different firmware via ODIN, no need to change CSC
Click to expand...
Click to collapse
So by flashing UK BTW Firmware It will automatically change my region to the UK and Ill be receiving UK OTA updates in the future?
Hgneto said:
So by flashing UK BTW Firmware It will automatically change my region to the UK and Ill be receiving UK OTA updates in the future?
Click to expand...
Click to collapse
Correct. As long as you use the CSC file and not the HOME_CSC file.
CuBz90 said:
Correct. As long as you use the CSC file and not the HOME_CSC file.
Click to expand...
Click to collapse
Thank you for your help
I want to flash the latest firmware for the S7 Edge - https://www.sammobile.com/firmwares/download/122404/G935FXXU1DQB3_G935FOXA1DQB1_BTU/
Anything I must pay attention in Odin or just flash it the normal way?
Also, in the instructions they say to use odin v3.11.1, is it ok if I use the latest odin which is v3.12.3, or it's better if I use the version they used to avoid any surprise problems?
Hgneto said:
Thank you for your help
I want to flash the latest firmware for the S7 Edge - https://www.sammobile.com/firmwares/download/122404/G935FXXU1DQB3_G935FOXA1DQB1_BTU/
Anything I must pay attention in Odin or just flash it the normal way?
Also, in the instructions they say to use odin v3.11.1, is it ok if I use the latest odin which is v3.12.3, or it's better if I use the version they used to avoid any surprise problems?
Click to expand...
Click to collapse
Just flash all 4 files, ignoring HOME_CSC.
Any Odin version should be fine.
CuBz90 said:
Just flash all 4 files, ignoring HOME_CSC.
Any Odin version should be fine.
Click to expand...
Click to collapse
Thanks! And besides my phone isn't originally from the UK I'll start receiving OTA updates from the UK? Or will the OTA's be received from the original country where the phone was bought?
Hgneto said:
Thanks! And besides my phone isn't originally from the UK I'll start receiving OTA updates from the UK? Or will the OTA's be received from the original country where the phone was bought?
Click to expand...
Click to collapse
You'll receive OTA updates for BTU
problem with connecting gear 3
Hello
installed this rom on my s7 flat 930w8 and everything works great but i can not get my gear 3 to connect keep getting an error message
error message: "check if your phone is compatible and if the samsung gear app needs to be updated then try again
somtimes i will get a download failed message first after hitting the connect button
CuBz90 said:
Correct. As long as you use the CSC file and not the HOME_CSC file.
Click to expand...
Click to collapse
I was research for this csc and change csc, and i have question. my product is ETL. if i only flash firmware from DBT with includec CSC, not HOME_CSC. does it auto change to DBT, or i must remove sim card while phone 1st. boot up? some guys says bcuz most firmwares is OXM it will stay already to ETL will not changing... can u give me answer for that? thank you so much